[Dspace-tech] email recipient link
Hi All, How do I change dspace email recipient link from http://localhost:8080/xmlui/ to the a server name or IP address. Please can someone assist. Thanks Regards Binta DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachments. Unless expressly stated, opinions in this message are those of the e-mail author and not of the Medical Research Council Unit The Gambia. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette
Re: [Dspace-tech] changing localhost
Hi Saidy You are not explicit about which dspace.cfg file you changed. If it is the one in your dspace-src directory - you need to run mvn package and ant update again and the restart your tomcat server. If you changed the file in your dspace deployment’s config directory - you need to restart your tomcat server Monika — Monika Mevenkamp Digital Repository Infrastructure Developer Phone: 609-258-4161 333C 701 Carnegie, Princeton University, Princeton, NJ 08544 On Jun 29, 2015, at 4:57 AM, Saidy Binta bisa...@mrc.gmmailto:bisa...@mrc.gm wrote: Hi All, I try change the localhost # DSpace host name - should match base URL. Do not include port number. dspace.hostname = Electron.data # DSpace base host URL. Include port number etc. dspace.baseUrl = http://Electronic.data:8080http://electronic.data:8080/ # DSpace base URL. Include port number etc., but NOT trailing slash # Change to xmlui if you wish to use the xmlui as the default, or remove # /jspui and set webapp of your choice as the ROOT webapp in # the servlet engine. dspace.url = ${dspace.url}/xmlui but I still have the below url instead. Please can anyone tell me what is wrong. http://localhost:8080/xmlui/xmlui/forgot?token=77aed5837e6e52414e41ba26fef087c2 DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gmmailto:h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachments. Unless expressly stated, opinions in this message are those of the e-mail author and not of the Medical Research Council Unit The Gambia. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.netmailto:DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette
[Dspace-tech] proxy setting
Hi All, I have try endlessly to change the localhost to our server name or IP address, but the changes are not been effected and still the email link is the same. So I was wonder if it may be cause by the fact that I did not set up a proxy server. I am confuse and I cannot do anything anymore. If a user try to register , he/she get and email with the link http://localhost:8080/xmlui/register?token=158df3b3d569b4762bcd2544d37744f4http://localhost:8080/xmlui/register?token=158df3b3d569b4762bcd2544d37744f4 and when they click it, they get page cannot be display make sure the web address is http://localhost:8080/xmlui/ is correct. Regards Binta DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachments. Unless expressly stated, opinions in this message are those of the e-mail author and not of the Medical Research Council Unit The Gambia. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette
Re: [Dspace-tech] changing localhost
The steps are look at dspace-src/config/dspace.cfg did you change the baseUrl there ? are there other definitions of baseUrl ? recompile: mvn clean package look at dspace-src/dspace/target/dspace-installer/config/dspace.cfg (i am assuming you use a recent dspace version) did the setting change in the file ? if not you need to carefully revisit the dspace.cfg in your dspace-src directory use git diff to see the difference to the original file deploy ant update check the dspace.cfg file in your deployment dir /dspace/config/dspace.cfg restart tomcat Monika — Monika Mevenkamp Digital Repository Infrastructure Developer Phone: 609-258-4161 333C 701 Carnegie, Princeton University, Princeton, NJ 08544 On Jun 29, 2015, at 10:02 AM, Saidy Binta bisa...@mrc.gmmailto:bisa...@mrc.gm wrote: I have rebuild multiple times but still the same. I am out of options. Binta From: Monika C. Mevenkamp [mailto:moni...@princeton.edu] Sent: 29 June 2015 13:56 To: Saidy Binta Cc: dspace-tech@lists.sourceforge.netmailto:dspace-tech@lists.sourceforge.net Subject: Re: [Dspace-tech] changing localhost Hi Saidy You are not explicit about which dspace.cfg file you changed. If it is the one in your dspace-src directory - you need to run mvn package and ant update again and the restart your tomcat server. If you changed the file in your dspace deployment’s config directory - you need to restart your tomcat server Monika — Monika Mevenkamp Digital Repository Infrastructure Developer Phone: 609-258-4161 333C 701 Carnegie, Princeton University, Princeton, NJ 08544 On Jun 29, 2015, at 4:57 AM, Saidy Binta bisa...@mrc.gmmailto:bisa...@mrc.gm wrote: Hi All, I try change the localhost # DSpace host name - should match base URL. Do not include port number. dspace.hostname = Electron.data # DSpace base host URL. Include port number etc. dspace.baseUrl = http://Electronic.data:8080http://electronic.data:8080/ # DSpace base URL. Include port number etc., but NOT trailing slash # Change to xmlui if you wish to use the xmlui as the default, or remove # /jspui and set webapp of your choice as the ROOT webapp in # the servlet engine. dspace.url = ${dspace.url}/xmlui but I still have the below url instead. Please can anyone tell me what is wrong. http://localhost:8080/xmlui/xmlui/forgot?token=77aed5837e6e52414e41ba26fef087c2 DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gmmailto:h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachments. Unless expressly stated, opinions in this message are those of the e-mail author and not of the Medical Research Council Unit The Gambia. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.netmailto:DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical
Re: [Dspace-tech] changing localhost
I have rebuild multiple times but still the same. I am out of options. Binta From: Monika C. Mevenkamp [mailto:moni...@princeton.edu] Sent: 29 June 2015 13:56 To: Saidy Binta Cc: dspace-tech@lists.sourceforge.net Subject: Re: [Dspace-tech] changing localhost Hi Saidy You are not explicit about which dspace.cfg file you changed. If it is the one in your dspace-src directory - you need to run mvn package and ant update again and the restart your tomcat server. If you changed the file in your dspace deployment’s config directory - you need to restart your tomcat server Monika — Monika Mevenkamp Digital Repository Infrastructure Developer Phone: 609-258-4161 333C 701 Carnegie, Princeton University, Princeton, NJ 08544 On Jun 29, 2015, at 4:57 AM, Saidy Binta bisa...@mrc.gmmailto:bisa...@mrc.gm wrote: Hi All, I try change the localhost # DSpace host name - should match base URL. Do not include port number. dspace.hostname = Electron.data # DSpace base host URL. Include port number etc. dspace.baseUrl = http://Electronic.data:8080http://electronic.data:8080/ # DSpace base URL. Include port number etc., but NOT trailing slash # Change to xmlui if you wish to use the xmlui as the default, or remove # /jspui and set webapp of your choice as the ROOT webapp in # the servlet engine. dspace.url = ${dspace.url}/xmlui but I still have the below url instead. Please can anyone tell me what is wrong. http://localhost:8080/xmlui/xmlui/forgot?token=77aed5837e6e52414e41ba26fef087c2 DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gmmailto:h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachments. Unless expressly stated, opinions in this message are those of the e-mail author and not of the Medical Research Council Unit The Gambia. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.netmailto:DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability
[Dspace-tech] File submission in DSpace 5.2/JSPUI
Hello DSpacers, I have a problem on DSpace 5.2 (I don't know if it is also happening on 5.1; I will try that). Anytime I set a file description to a submission in DSpace I get a error message and submission procedure terminates. Looking into the incomplete submissions in My DSpace is working and shows the submission with the file - but this is anything but convenient. The error message is not a Server error, it is indicating a malformed request: System Error: Malformed Request There was an inconsistency in the data received from your browser. This may be due to one of several things: Sometimes, if you used your browser's back button during an operation like a submission, clicking on a button may try and do something that's already been done, such as commit the submission to the archive. Clicking your browsers reload or refresh button may have similar results. If you got here by following a link or bookmark provided by someone else, the link may be incorrect or you mistyped the link. Please check the link and try again. If you have more than one browser window open with DSpace, this can cause a similar problem whereby a button clicked in one window may make a button click in the other window invalid. Of course, you may have uncovered a problem with the system! All of these errors are logged, and we'll be checking them regularly to see if there is a problem. If the problem persists, please contact the DSpace site administrators This is what I see in my logfile: 2015-06-29 13:20:37,931 WARN org.dspace.app.webui.submit.step.JSPUploadStep @ o.goldschm...@tuhh.de:session_id=xxx:ip_addr=134.28.x.y:integrity_error:-- URL Was\colon; https\colon; //dspace5.tub.tuhh.de/submit -- Method\colon; POST -- Parameters were\colon; -- workspace_item_id\colon; 1288 -- jsp\colon; /submit/choose-file.jsp -- page\colon; 1 -- ajaxUpload\colon; false -- description\colon; Was zum...?! -- file\colon; -- submit_upload\colon; Weiter -- step\colon; 4 2015-06-29 13:20:37,931 DEBUG org.dspace.app.webui.util.JSPManager @ o.goldschm...@tuhh.de:session_id=xxx:ip_addr=134.28.x.y:view_jsp:/error/integrity.jsp Any ideas, what exactly is going wrong here? Thank you, Oliver -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette
[Dspace-tech] Apache Tomcat becomes slow to load Dspace on Browser
Hi All, Here i have got very strange problem that is, i have copied xmlui,Jspui,Solr,Sword,Swordv2,Rest,Lni Oai Folders from Dspace Webapps in to the Apache Tomcat Webapps and when i hit a link http://localhost:8080/xmlui then my browser became slow and it was not getting any response from Tomcat Server and Tomcat was unable to send response so could you please suggest me weather i have to keep all those folders apart from Xmlui Jspui in to the Webapps of Tomcat or not, if yes then please help me how to Speed Up the Tomcat to fetch all those folders. Any help is appreciated here... Thanks Regards, Mansoor Al Noora Librarian Riyadh,Saudi Arabia -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette
Re: [Dspace-tech] Vagrant or Docker
My 2 cents is that we (Longsight) are rolling out our infrastructure with Docker. We have java templates, tomcat, dspace templates. The DSpace template builds on top of a tomcat template, which builds off of a java template, which builds off of our base linux template. We're not done, but its giving us predictability, and eventually fully automated deploys / updates. Its complicated for the time being. Part of this terrifying paradigm is that you design your application to survive instances dying. i.e. Just assume that the database, solr, ES, postgres, nginx, tomcat, can go down at any moment, and the application shouldn't lose data, and a management tool should be able to quickly scale / restart things to bring it all back up. This is probably more geared to an application that has many instances of it running (one big unified DSpace application that holds dozens of clients data). As opposed to an instance per client. It's probably helpful to read up on building a 12 factor app http://12factor.net/. Also, part of your instance setup is that automation does everything, you should eventually be able to disable ssh into your servers. Crazy huh? The argument of Vagrant template being maintained by committers, well, there's no reason that the DSpace community couldn't maintain docker templates. Peter Dietz Longsight www.longsight.com pe...@longsight.com p: 740-599-5005 x809 On Thu, Jun 25, 2015 at 11:59 AM, Tim Donohue tdono...@duraspace.org wrote: A few notes on this Vagrant v. Docker discussion... Vagrant is *specifically* built for development/testing environments. It's not recommended to use in Production. Take a look at how it's advertised...it's Development environments made easy: https://www.vagrantup.com/ Vagrant is also a level of abstraction above Docker. It's about providing a repeatable virtual machine environment, and you can do so using Puppet (which is what vagrant-dspace uses), Chef, Ansible, or even Docker itself! That's right, Vagrant actually has a Docker Provisioner which lets you spin up a VM, auto-install Docker and one (or more) Docker containers. http://docs.vagrantup.com/v2/provisioning/docker.html Docker on the other hand is built more for Continuous Integration / Production environments. You could use it for a development environment, but it's more ideal for CI. That being said, you could use it *with* Vagrant...where you actually build a Docker container for your Production environment, but have the option of starting it via Vagrant for development / testing work. Here's an excellent answer to this question from the guy who wrote Vagrant on why comparing Vagrant to Docker is a bit like apples vs. oranges: http://stackoverflow.com/a/21314566/3750035 My personal opinion here is that Docker is worth learning/using, IF you plan to use it in your Production environment. However, if you have no plans to use Docker in Production, then you may find it is easier tomimic your existing production server by just using Vagrant. Currently, we do NOT have a centrally managed DSpace Docker container (so anything out there is third-party built...so mileage may vary). But we do obviously provide vagrant-dspace (which is maintained by Committers, as several of us use it for development/testing of DSpace). https://github.com/DSpace/vagrant-dspace - Tim On 6/23/2015 4:57 PM, Monika C. Mevenkamp wrote: Hi my boss discovered a dspace docker so which one should I do - docker or vagrant ? They sound awfully alike the host can connect to things : tomcat / ssh / ... files can be shared between host and vagrant/docker guest it appears to be easy to hand a ‘vagrant’ or a ‘docker’ to another developer so what’s the deal ? why one over the other ? Monika — Monika Mevenkamp Digital Repository Infrastructure Developer Phone: 609-258-4161 333C 701 Carnegie, Princeton University, Princeton, NJ 08544 -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download nowhttp://ad.doubleclick.net/ddm/clk/292181274;119417398;o ___ DSpace-tech mailing listDSpace-tech@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now
[Dspace-tech] changing localhost
Hi All, I try change the localhost # DSpace host name - should match base URL. Do not include port number. dspace.hostname = Electron.data # DSpace base host URL. Include port number etc. dspace.baseUrl = http://Electronic.data:8080 # DSpace base URL. Include port number etc., but NOT trailing slash # Change to xmlui if you wish to use the xmlui as the default, or remove # /jspui and set webapp of your choice as the ROOT webapp in # the servlet engine. dspace.url = ${dspace.url}/xmlui but I still have the below url instead. Please can anyone tell me what is wrong. http://localhost:8080/xmlui/xmlui/forgot?token=77aed5837e6e52414e41ba26fef087c2 DISCLAIMER: This message is private and confidential. If you have received this message in error please notify us and remove it from your system. Any views and opinions expressed in this message are those of the individual sender and do not necessarily represent the views and opinions of Medical Research Council Unit, The Gambia ___ This communication is confidential and may contain privileged information intended solely for the named recipient(s). It may not be used or disclosed except for the purpose for which it has been sent. If you are not the intended recipient, you must not copy, distribute, take any action or reliance on it. If you have received this communication in error, do not open any attachments but please notify the Help Desk by e-mailing h...@mrc.gm quoting the sender details, and then delete this message along with any attached files. E-mail messages are not secure and attachments could contain software viruses which may damage your computer system. Whilst every reasonable precaution has been taken to minimise this risk, The MRC Unit The Gambia cannot accept any liability for any damage sustained as a result of these factors. You are advised to carry out your own virus checks before opening any attachments. Unless expressly stated, opinions in this message are those of the e-mail author and not of the Medical Research Council Unit The Gambia. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette
Re: [Dspace-tech] Altmetrics and DSpace how to add?
Thanks Hilton and Helix, I have opened port 80 and 443, maybe my problem is because i not registered handle - i try this in my production where i have registered handle, but firstly i must upgrade dspace from 3.2 to 5.2. Thanks. btw, I Try used Mirage2 with dspace 5.2 a i have a few questions: 1) It is stable and this theme will be developed? 2) To start using Mirage2 i used:* mvn package -Dmirage2.on=true* from normal user and ant update but i dont see good mirage2 theme: http://150.254.65.106:8080/xmlui/ and i must wait a little time to can see this... What can be wrong ? Karol -- View this message in context: http://dspace.2283337.n4.nabble.com/Altmetrics-and-DSpace-how-to-add-tp4678559p4678625.html Sent from the DSpace - Tech mailing list archive at Nabble.com. -- Monitor 25 network devices or servers for free with OpManager! OpManager is web-based network management software that monitors network devices and physical virtual servers, alerts via email sms for fault. Monitor 25 devices for free with no restriction. Download now http://ad.doubleclick.net/ddm/clk/292181274;119417398;o ___ DSpace-tech mailing list DSpace-tech@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dspace-tech List Etiquette: https://wiki.duraspace.org/display/DSPACE/Mailing+List+Etiquette