Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
Volker Kuhlmann said: I'd love to, but might not have access to the drive for a few more weeks. When I have, I'll try it out. Could this be a SCSI implementation problem? I could try the USB1.1 as well for comparison, it will underrun the buffer, but not until after it's answered whether it'll write more than 0 bytes. Anything else to try? There'll prob be only one shot at the drive. let me know what configuration you would like to test this with and I can test it since I have the Sony drive. Scott ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
On Tue, 1 Jul 2003, Volker Kuhlmann wrote: I assume cdrecord-ossdvd is identical to dvdrecord, except that it is based on cdrecord 2. Is this correct Robert? In that case, dvdrecord should be committed to the attic, and I didn't test it. Yes i'm afraid so ... What do you mean by afraid? There are too many different programs already, getting rid of a superseeded one is a bonus. speed=1 doesn't work, to put it better, the speed= command is not implemented. All parameters are adjusted at insertion of your DVD-R(W) media into the SONY drive. cdrecord-ossdvd cannot change those, neither can dvdrecord (dvdrtools). Ah, thanks for that info. The open-source patch for dvds doesn't contain speed control. Really nice would be to display a warning to that effect. write track data: error after 0 bytes somehow i cannot believe this ... could you try these commands ? : I'd love to, but might not have access to the drive for a few more weeks. When I have, I'll try it out. Could this be a SCSI implementation problem? I could try the USB1.1 as well for comparison, it will underrun the buffer, but not until after it's answered whether it'll write more than 0 bytes. Anything else to try? There'll prob be only one shot at the drive. Well actually i'm also interested to see if the Sony DRU-500A (the atapi version) works as expected. # cdrecord-ossdvd -v dev=0,0,0 driveropts=burnfree -dao dvd_iso_image.raw *That's* how to turn on burn-free... thanks! cheers, Robert -- Robert M. Stockmann - RHCE Network Engineer - UNIX/Linux Specialist crashrecovery.org [EMAIL PROTECTED] ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
On Thu, 26 Jun 2003, Volker Kuhlmann wrote: did you also try the Sony DRX-500ULX USB2 drive with the OSS DVD extensions for cdrtools-2.0 ? : Patience patience - I'm getting to that ;) I no longer have access to the drive, but was able to borrow it for a few hours yesterday. Firmware upgraded to 2.0 on the drive. 0,0,0 0) 'SONY' 'DVD RW DRU-500A ' '2.0f' Removable CD-ROM Connected via ieee1394, the box only has USB1 which works fine with this drive for everything but writing DVDs. Kernel 2.4.20, SuSE 8.2. I wanted to know what my options would be for writing DVDs. Due to bad timing the supply of DVD+RW had run out this week, so I could only test DVD-RW. growisofs: complains about mounted media is not DVD+R(W). Sorry no testing this with +RW this time. I assume cdrecord-ossdvd is identical to dvdrecord, except that it is based on cdrecord 2. Is this correct Robert? In that case, dvdrecord should be committed to the attic, and I didn't test it. Yes i'm afraid so ... With cdrecord-ossdvd, -load, -eject, blank=fast are working fine. -toc works if the disk has something on it, it gives a scsi error otherwise: cdrecord-ossdvd: Input/output error. read toc: scsi sendcmd: no error CDB: 43 00 00 00 00 00 00 00 04 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 19 44 4A 93 0A 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 423905939 (not valid) cmd finished after 0.004s timeout 40s cdrecord-ossdvd: Cannot read TOC header cdrecord-ossdvd: Cannot read TOC/PMA In some (all?) cases cdrecord-prodvd gives a scsi error too for -toc on a blank disk. There are other downsides to cdrecord-ossdvd. -atip doesn't ever seem to show anything useful. Writing in TAO (i.e. default) mode failed: Supported modes: PACKET SAO Drive buf size : 4718592 = 4608 KB FIFO size : 4194304 = 4096 KB cdrecord-ossdvd: Drive does not support TAO recording. cdrecord-ossdvd: Illegal write mode for this drive. This appears to be nonsense, as cdrecord-prodvd says: Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R Drive buf size : 4718592 = 4608 KB FIFO size : 4194304 = 4096 KB Track 01: data 3906 MB padsize: 30 KB Total size: 3906 MB = 215 sectors Current Secsize: 2048 Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 298481 Starting to write CD/DVD at speed 1 in real TAO mode for single session. Writing to a blanked DVD-RW fails with: cdrecord-ossdvd dev=0,0,0 speed=1 -data -dao -v /data/tmp/diskimg speed=1 doesn't work, to put it better, the speed= command is not implemented. All parameters are adjusted at insertion of your DVD-R(W) media into the SONY drive. cdrecord-ossdvd cannot change those, neither can dvdrecord (dvdrtools). scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 cdrecord-ossdvd: Warning: using inofficial libscg transport code version ([EMAIL PROTECTED] '@(#)scsi-linux-sg.c1.75 02/10/21 Copyright 1997 J. Schilling'). Cdrecord 2.0 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' atapi: 1 Device type: Removable CD-ROM Version: 2 Response Format: 2 Capabilities : Vendor_info: 'SONY' Identifikation : 'DVD RW DRU-500A ' Revision : '2.0f' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 4718592 = 4608 KB FIFO size : 4194304 = 4096 KB Track 01: data 3906 MB Total size: 4486 MB (444:26.66) = 200 sectors Lout start: 4486 MB (444:28/50) = 200 sectors Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type:unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 298496 Starting to write CD/DVD at speed 1 in real SAO mode for single session. Last chance to quit, starting real write in 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Sending CUE sheet... Starting new track at sector: 2000166 Track 01:0 of 3906 MB written.cdrecord-ossdvd: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 1E 85 26 00 00 1F 00 status: 0x2 (CHECK
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
As far as I know, dvd+rw-tools works under only Linux and Solaris. It's just had patches incorporated to make it work natively under FreeBSD as well. http://www.freebsdforums.org/forums/showthread.php?threadid=11064 I'm using growisofs on FreeBSD currently. ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
Well I was able to get the firmware upgraded to 2.0f but I am still getting an error: trackno=0 dvdrecord: Input/output error. reserve track: scsi sendcmd: no error CDB: 53 00 00 00 00 FF FF FF FF 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.006s timeout 200s dvdrecord: Cannot open new session. Has anybody been able to solve this problem? Thanks, Scott Volker Kuhlmann said: I am trying to use dvdrecord with my sony DRX-500ULX drive (connected via USB). I get the following error: dvdrecord: Input/output error. reserve track: scsi sendcmd: no error CDB: 53 00 00 00 00 FF FF FF FF 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Looking through the archives this means that I should upgrade my firmware, right? I don't think from this fragment of SCSI I/O one can derive anything useful. Use cdrecord-prodvd -inq to obtain the drive firmware version, if it's 2.0c you need to upgrade. The latest firmware is available from http://sony.storagesupport.com/dvdrw/drx500ulxdwn.htm (scroll down to Firmware Upgrade 2.0F) Has anyone successfully managed to install this under Linux? How? Otherwise it may be safer to use a windows box to do the firmware upgrade. As for getting the drive recognised, with any Linux distribution worth using this is fully automatic. You plug it in, the computer beeps a couple of times, you may need to run rescan_scsi_bus.sh (as root, you do for ieee1394), and you can see the drive in /proc/scsi/scsi. I only have a USB1.1 to test this with but cdrecord worked fine (execept for writing which I didn't attempt). I can't remember which modules were loaded by the hotplug system, the usual uhci and scsi stuff. SuSE 8.2, kernel 2.4.20 (SuSE does apply many patches to their kernels). Volker -- Volker Kuhlmann is possibly list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me. ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
Unless I'm mistaken, dvdrtools still doesn't support the DRU500A or DRU500AX. Maybe it doesn't support the ULX either. Have you tried dvd+rw-tools? In spite of the name, you can burn DVD-R and -RW discs with it. I have burned many -R and -RW discs (as well as +R and +RW discs) with my DRU500A using these tools. Of course, the DRU500A is an internal IDE drive, but I hear from sources of unknown reliability that the DRU500ULX is supposed to work under Linux. As far as I know, dvd+rw-tools works under only Linux and Solaris. I bet cdrecord-ProDVD probably works this drive, though this is based only on the fact that it has historically worked with a much wider range of hardware than dvdrtools or cdrecord + dvd patch. For dvd+rw-tools, check out http://fy.chalmers.se/~appro/linux/DVD+RW/ -- Jay Berkenbilt [EMAIL PROTECTED] http://www.ql.org/q/ ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
I have DRX-500UL and can only use growisofs. I could not get cdrecord -prodvd, dvdrecord, or mkudfs to work and I really want to use udf with DVD+R. Some body please announce when/if udf is supported for Sony DRX-500UL. thanks Ted Jay Berkenbilt wrote: Unless I'm mistaken, dvdrtools still doesn't support the DRU500A or DRU500AX. Maybe it doesn't support the ULX either. Have you tried dvd+rw-tools? In spite of the name, you can burn DVD-R and -RW discs with it. I have burned many -R and -RW discs (as well as +R and +RW discs) with my DRU500A using these tools. Of course, the DRU500A is an internal IDE drive, but I hear from sources of unknown reliability that the DRU500ULX is supposed to work under Linux. As far as I know, dvd+rw-tools works under only Linux and Solaris. I bet cdrecord-ProDVD probably works this drive, though this is based only on the fact that it has historically worked with a much wider range of hardware than dvdrtools or cdrecord + dvd patch. For dvd+rw-tools, check out http://fy.chalmers.se/~appro/linux/DVD+RW/ -- Jay Berkenbilt [EMAIL PROTECTED] http://www.ql.org/q/ ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users -- Ted Huntington Programmer Analyst I Main Library University of California, Irvine PO Box 19557 Irvine, CA 92623-9557 Phone Bus Off 949 824 8926 Phone MRC 949 824 1674 emesg: [EMAIL PROTECTED] webpage: http://business.lib.uci.edu/webpages/ted.htm Stop violence, teach science. ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
On Sun, 22 Jun 2003, Scott Savarese wrote: I am trying to use dvdrecord with my sony DRX-500ULX drive (connected via USB). I get the following error: dvdrecord: Input/output error. reserve track: scsi sendcmd: no error CDB: 53 00 00 00 00 FF FF FF FF 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) Looking through the archives this means that I should upgrade my firmware, right? But where can I get new firmware from and how do I install it? Does dvdrecord support this drive? dvdrecord uses the mmc_mdvdgeneric SCSI-3/mmc DVD-R(W) driver to burn DVD-R's . So it needs a scsi layer and a sg layer or just libschilly. So one would need a usb2-scsi layer to get that functionality. There's hpusbscsi.o as a driver. I dunno how its done in this case . Does one first have a usb2-ide driver loaded and next load the ide-scsi driver? check withs lsmod whats loaded ? Robert -- Robert M. Stockmann - RHCE Network Engineer - UNIX/Linux Specialist crashrecovery.org [EMAIL PROTECTED] ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
Re: [Dvdrtools-users] Help with Sony DRX-500ULX drive
I am trying to use dvdrecord with my sony DRX-500ULX drive (connected via USB). I get the following error: dvdrecord: Input/output error. reserve track: scsi sendcmd: no error CDB: 53 00 00 00 00 FF FF FF FF 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Looking through the archives this means that I should upgrade my firmware, right? I don't think from this fragment of SCSI I/O one can derive anything useful. Use cdrecord-prodvd -inq to obtain the drive firmware version, if it's 2.0c you need to upgrade. The latest firmware is available from http://sony.storagesupport.com/dvdrw/drx500ulxdwn.htm (scroll down to Firmware Upgrade 2.0F) Has anyone successfully managed to install this under Linux? How? Otherwise it may be safer to use a windows box to do the firmware upgrade. As for getting the drive recognised, with any Linux distribution worth using this is fully automatic. You plug it in, the computer beeps a couple of times, you may need to run rescan_scsi_bus.sh (as root, you do for ieee1394), and you can see the drive in /proc/scsi/scsi. I only have a USB1.1 to test this with but cdrecord worked fine (execept for writing which I didn't attempt). I can't remember which modules were loaded by the hotplug system, the usual uhci and scsi stuff. SuSE 8.2, kernel 2.4.20 (SuSE does apply many patches to their kernels). Volker -- Volker Kuhlmann is possibly list0570 with the domain in header http://volker.dnsalias.net/ Please do not CC list postings to me. ___ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users