Dave,
Look for portmap file in the on-line help; it allows remapping for LP ports.
--Paul
On Mon, Dec 17, 2018 at 11:07 PM Joe Subich, W4TV wrote:
>
> Dave,
>
> In Windows Device Manager -> Ports (COM & LPT) you associate a Legacy
> LPT Port Number (LPT1, LPT2, or LPT3) with your PCIe LPT port (Port
> Settings tab for that port). While N1MM+ uses the port address from the
> Resources tab, DX4win uses the Legacy Port Number (LPT1, LPT2, or LPT3)
> to identify the LPT port for radio 1/2 signal (Parameters -> CW).
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2018-12-17 10:26 PM, N4QS, Dave Perry wrote:
> > Alan, I did have to install the lptdriver as you suggested, but I also
> had
> > to reset the LPT port address in N1MM+ to match the address for the new
> PCIe
> > card. The DXD works fine now in N1MM, but I can't see a way to change
> the
> > address in DX4WIN. I have emailed Paul. Thanks for the assist. 73,
> Dave -
> > N4QS
> >
> >
> > -Original Message-
> > From: Alan Walters
> > Sent: Sunday, December 16, 2018 3:18 PM
> > To: n...@vci.net; dx4win@mailman.qth.net
> > Subject: RE: [Dx4win] Expert mode and DX Doubler
> >
> > Dave, I too am using my DX Doubler with 9.0.4 with Win7. I wonder if you
> > have installed the lptdriver? Assuming you installed DX4W directly in C:
> > drive, you will find this at C:/dx4w/drivers/lptdriver.
> >
> > Al, K5NOF
> >
> > -Original Message-
> > From: dx4win-boun...@mailman.qth.net [mailto:
> dx4win-boun...@mailman.qth.net]
> > On Behalf Of n...@vci.net
> > Sent: Sunday, December 16, 2018 12:51 PM
> > To: dx4win@mailman.qth.net
> > Subject: [Dx4win] Expert mode and DX Doubler
> >
> > I am trying to reinstall my legacy DX Doubler SO2R box with DX4WIN ver
> > 9.0.4. It used to work great under version 8.5. When I go to
> Preferences,
> > Control tab, I cannot change the Type or LPT1 port under Band Decoder.
> With
> > version 9.04, the type is grayed out as None under Band decoder. As I
> > recall, you used to have to go into the Personal tab to turn on expert
> mode
> > to change this, but that is no longer available. Is Top Ten Devices
> using a
> > LPT port still supported in Version 9? And can anyone tell me what
> happened
> > to Expert Mode? Thanks, Dave, N4QS
> >
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to pvandere...@gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
