[Dx4win] SWL Labels
Hi Byron et all I use it too. Works fine on 5.02 The only thing I miss is not printing the WKD station. Maybe it was already implemented on recent versions, but I don't remember to read anything about it. 73 F.Costa, CT1EAT www.qsl.net/ct1eat - Original Message - From: ARS NZ3O (Byron) FM29fx [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, July 22, 2004 2:47 AM Subject: [Dx4win] SWL Labels I'm getting the impression that no one uses DX4WIN to generate SWL labels. Since it doesn't seem to work, maybe that should be dropped in future releases. Is everyone doing these by hand? 73, Byron
[Dx4win] Interfacing FT-847 with DX4WIN
Hi all I've been trying to interface DX4WIN with a Yaesu FT-847, but without sucess. I've done a null modem cable, connected it (both on PC and rig), setup DX4WIN for the right radio and FT-847 for the proper baud rate (9600). The CAT icon does appear when program starts, but after a couple tries an error message says An exception occured! Acess violation at adress 0050fa74 in module DX4WIN.EXE. Read of address I already tested the cable with another program (MixW) and it works fine I apreciate any help on this subject. Many thanks in advance. Have a good wekend 73 F.Costa, CT1EAT www.qsl.net/ct1eat P.S. FYI the serial number is 8E030405, and according to the previous owner, it has all the applicable updates.
[Dx4win] Soundcard questions
- Original Message - From: Jim Rhodes [EMAIL PROTECTED] To: Rick Stoneking [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Monday, November 18, 2002 8:02 PM Subject: Re: [Dx4win] Soundcard questions Also if the 950 is like the 570 in this aspect, the VOX also does not function with the rear panel input. I'm using the rear panel ACC 2 (13 pin din connector) of my 950SDX and it does work with VOX. Actually I'm using that facility because I'm not able to make MixW work together with LCU3-K serial interface. It Tx's the rig, but doesn't stop. I have to turn the radio off to make it stop. Any idea to fix that? TIA 73 F.Costa, CT1EAT http://www.qsl.net/ct1eat
[Dx4win] PC interface: PSE help
Hi all I'm trying to make the PC work together with the radio, but so far I had no sucess! The radio is a Kenwood TS-950SDX and the interface is a LCU-3K. Although I've done everything mention on manuals (radio, interface, software) the best result I got was a Windows error msg: ie_Open - device already open Any help is most welcome. Thanks in advance 73 F.Costa, CT1EAT http://www.qsl.net/ct1eat UPDATED P.S. BTW, I'm using 5.03 version and Win 98.