Hi Juha,
Yes there is a way but not 100% bullet proof and only for FT8 not FT4 since
this is Mode MFSK Submode FT4
I suggest you start with write configuration file in Setup Parameters
Copy that file on a usb stick or safe place.
Now in Setup Parameters
Under "QSO" change all bands CW CUTTOFF frequency so that the FT8 freq is
not part of CW
The reason why I wrote not bullet proof is that some expeditions use another
freq than the
normal FT8 freq and can be in the CW PART
Under Packet 3 tab select the bands you need and in Modes only FT8
Safe this and normally only FT8 spots will get into DX SPOTS WINDOW
Guy ON4AOI - OT7K
-Original Message-
From: dx4win-boun...@mailman.qth.net On
Behalf Of Juha Rantanen
Sent: Tuesday, December 12, 2023 2:24 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Filtering digi spots
Hi,
Is there a way in DX4WIN to filter out digi (FT8) band mode points away? I
sold my soul recently to K1JT and FT8 and now that I have activated DIG to
DXCC and FT8 spots I am seeing FT8 spots being a new mode point for each
DXCC. I am not going to start working every country again on FT8 just to
sort out the DX Spots window. I would like to see new countries and band
points only on FT8.
73,
Juha OH6XX
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
