[Dx4win] TS890s on RTTY with DX4WIN - MMTTY

[wd4ngb]

Is anyone using a Kenwood TS890S with DX4WIN and MMTTY  with a USB 
connection, rather than a cables from a sound card? Trying to get back 
into RTTY, with my new TS890. I am also interested in getting my TS890 
on some of the other digital modes.





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY v. 1.70 vs. DX4WIN 8.05

[John K9EL]

Radi - I seem to remember that there was some issue with V1.7, but
unfortunately I cannot remember what the problem was.   I checked and all my
installs are still 1.68.

73, John K9EL

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Jim Reisert AD1C
Sent: Friday, December 27, 2019 6:49 PM
To: Radivoj Kar, F6GNZ 
Cc: Dx4win Support ; DX4WIN Reflector

Subject: Re: [Dx4win] MMTTY v. 1.70 vs. DX4WIN 8.05

On Fri, Dec 27, 2019 at 1:06 PM Radivoj Kar, F6GNZ wrote:

> I have previously used MMTTY v. 1.68A and see there is a new MMTTY v. 
> 1.70 that should be installed over the 1.68A Is it compatible with D4W
8.05 or should any changes to be made??

Yes, as far as I know.  1.70 isn't really that new, see:

https://hamsoft.ca/pages/mmtty.php

MMTTY V1.70K
June 4, 2017

--
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY v. 1.70 vs. DX4WIN 8.05

[Jim Reisert AD1C]

On Fri, Dec 27, 2019 at 1:06 PM Radivoj Kar, F6GNZ wrote:

> I have previously used MMTTY v. 1.68A and see there is a new MMTTY v. 1.70 
> that should be installed over the 1.68A
> Is it compatible with D4W 8.05 or should any changes to be made??

Yes, as far as I know.  1.70 isn't really that new, see:

https://hamsoft.ca/pages/mmtty.php

MMTTY V1.70K
June 4, 2017

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY v. 1.70 vs. DX4WIN 8.05

[Radivoj Kar, F6GNZ via DX4WIN]

Hi,I have previously used MMTTY v. 1.68A and see there is a new MMTTY v. 1.70 
that should be installed over the 1.68AIs it compatible with D4W 8.05 or should 
any changes to be made??
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY with DX4WIN will not TX (for EA5FID)

[Kostas SV1DPI]

Reading the microkeyer ii setup guide will help you to find problems 
(even you are not using this product).


See this http://www.microham.com/Downloads/MK2_DX4win_Setup.pdf

...73 de Kostas SV1DPI

  (One of SZ1A-EP6T)

Στις 15/4/2018 12:50 πμ, ο Dan Violette έγραψε:

I have been trying to help Juan EA5FID with his problem.  I ran out of
ideas.  Here are the clues:

  


*   MMTTY transmits and receives OK alone
*   MMTTY launches out of DX4WIN OK (executable entered correctly and
launches)
*   MMTTY receives OK when launched from DX4WIN
*   Problem:  Does not transmit when launched out of DX4WIN

*   Using: TX / PTT & FSK / Port EXTFSK in MMTTY
*   Using ICOM radio commands for Rx/Tx (Icom CI-V)

  


If you can help Juan that would be appreciated.  I am not using Icom.  I can
send an email train with pictures of his settings directly if needed.

  


/Dan KI6X

  

  


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to sv1...@otenet.gr

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY with DX4WIN will not TX (for EA5FID)

[Dan Violette]

I have been trying to help Juan EA5FID with his problem.  I ran out of
ideas.  Here are the clues:

 

*   MMTTY transmits and receives OK alone
*   MMTTY launches out of DX4WIN OK (executable entered correctly and
launches)
*   MMTTY receives OK when launched from DX4WIN
*   Problem:  Does not transmit when launched out of DX4WIN

*   Using: TX / PTT & FSK / Port EXTFSK in MMTTY 
*   Using ICOM radio commands for Rx/Tx (Icom CI-V)

 

If you can help Juan that would be appreciated.  I am not using Icom.  I can
send an email train with pictures of his settings directly if needed.

 

/Dan KI6X

 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Issue

[Chris Sauvageot]

This bug exist also in other software - using MMTTY .

N1MM+ i have to touch MMTTY windows and do a small resize

In last contest WAE Rtty i using as 2. decoder 2-Tone (both decoder 
parallel) and he did a much better job in decoding


73 Chris



On Nov 13, 2017, at 6:40 PM, John Holmes  wrote:

I am using the latest version of MMTTY  1.70K. When I launch MMTTY using the
WINDOW>MMTTY menu in DX4WIN 9.02, the bottom 1/4 of the following are
missing: the FFT display, the squelch bar and the waterfall. If I enlarge
MMTTY to full screen then reduce the size to the normal size (about 2"
tall), the displays are OK. Not a big deal but irritating. If I launch MMTTY
directly from the desktop (not through DX4WIN) it appears as it should,
correctly at 2"high. MMTTY is located in c:\ham\MMTTY. Any ideas?

John W9ILY





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY issue

[John Holmes]

I reverted to MMTTY ver 1.68A and the missing portion of the screen problem 
disappeared. Scaling the screen in DX4WIN did not correct the issue, just 
reverting to the older version of MMTTY. Thanks for the suggestions, guys.

73,

John W9ILY
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Issue

[John, K9EL]

John - did you try playing with the Scale Factor in Preferences- Screen?

MMTTY works fine here with 9.02 and MMTTY Ver 1.68A.

John K9EL


On Nov 13, 2017, at 6:40 PM, John Holmes  wrote:

I am using the latest version of MMTTY  1.70K. When I launch MMTTY using the
WINDOW>MMTTY menu in DX4WIN 9.02, the bottom 1/4 of the following are
missing: the FFT display, the squelch bar and the waterfall. If I enlarge
MMTTY to full screen then reduce the size to the normal size (about 2"
tall), the displays are OK. Not a big deal but irritating. If I launch MMTTY
directly from the desktop (not through DX4WIN) it appears as it should,
correctly at 2"high. MMTTY is located in c:\ham\MMTTY. Any ideas?

John W9ILY



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to k...@comcast.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Issue

[Courtney Judd]

well, search me! hit the clear tab and it went back to printing RX and 
TX normally just got thru to 9U4M for a new rtty country I have 
no idea what made this act this way never happened before! 73's Cort 
K4WI



Courtney Judd 
Monday, November 13, 2017 7:20 PM
also having mmtty issue tonight trying to work 9u4m on 40 split 
and rx window shows everything printing in reverse order, tx is the 
same... in other words my call shows as IW4K instead of K4WI; 599 
comes up as 995 etc. I have gritty up and running and it shows correct 
order in its receive so problem has to be mmtty/dx4win issue what 
to do to make it print correctly? thanks, Cort K4WI


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to k...@k4wi.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Issue

[Courtney Judd]

also having mmtty issue tonight trying to work 9u4m on 40 split and 
rx window shows everything printing in reverse order, tx is the same... 
in other words my call shows as IW4K instead of K4WI; 599 comes up as 
995 etc. I have gritty up and running and it shows correct order in its 
receive so problem has to be mmtty/dx4win issue what to do to make 
it print correctly? thanks, Cort K4WI



John Holmes 
Monday, November 13, 2017 6:40 PM
I am using the latest version of MMTTY 1.70K. When I launch MMTTY 
using the

WINDOW>MMTTY menu in DX4WIN 9.02, the bottom 1/4 of the following are
missing: the FFT display, the squelch bar and the waterfall. If I enlarge
MMTTY to full screen then reduce the size to the normal size (about 2"
tall), the displays are OK. Not a big deal but irritating. If I launch 
MMTTY

directly from the desktop (not through DX4WIN) it appears as it should,
correctly at 2"high. MMTTY is located in c:\ham\MMTTY. Any ideas?

John W9ILY



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to k...@k4wi.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Issue

[PY2YP]

John, please try this:

Open a DOS window and go to the MMTTY directory. In my case:
C:\> cd\mmtty
then
C:\MMTTY>mmtty -r

Calling the MMTTY with the option -r I did reproduce the problem. Looks 
like a MMTTY issue. I'm using MMTTY 1.70L.


73 DX de PY2YP - Cesar

On 13/11/2017 22:40, John Holmes wrote:

I am using the latest version of MMTTY  1.70K. When I launch MMTTY using the
WINDOW>MMTTY menu in DX4WIN 9.02, the bottom 1/4 of the following are
missing: the FFT display, the squelch bar and the waterfall. If I enlarge
MMTTY to full screen then reduce the size to the normal size (about 2"
tall), the displays are OK. Not a big deal but irritating. If I launch MMTTY
directly from the desktop (not through DX4WIN) it appears as it should,
correctly at 2"high. MMTTY is located in c:\ham\MMTTY. Any ideas?

John W9ILY



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to py...@py2yp.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Issue

[PY2YP]

I'm having this issue too.

73 DX de PY2YP - Cesar

On 13/11/2017 22:40, John Holmes wrote:

I am using the latest version of MMTTY  1.70K. When I launch MMTTY using the
WINDOW>MMTTY menu in DX4WIN 9.02, the bottom 1/4 of the following are
missing: the FFT display, the squelch bar and the waterfall. If I enlarge
MMTTY to full screen then reduce the size to the normal size (about 2"
tall), the displays are OK. Not a big deal but irritating. If I launch MMTTY
directly from the desktop (not through DX4WIN) it appears as it should,
correctly at 2"high. MMTTY is located in c:\ham\MMTTY. Any ideas?

John W9ILY



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to py...@py2yp.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY Issue

[John Holmes]

I am using the latest version of MMTTY  1.70K. When I launch MMTTY using the
WINDOW>MMTTY menu in DX4WIN 9.02, the bottom 1/4 of the following are
missing: the FFT display, the squelch bar and the waterfall. If I enlarge
MMTTY to full screen then reduce the size to the normal size (about 2"
tall), the displays are OK. Not a big deal but irritating. If I launch MMTTY
directly from the desktop (not through DX4WIN) it appears as it should,
correctly at 2"high. MMTTY is located in c:\ham\MMTTY. Any ideas?

John W9ILY



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Björn Ekelund]

Thanks. I got about half a dozen other responses that confirms the problem.

Overall, now having added a second sound card, I notice DX4Win makes a
lot of noise.
E.g. when hitting the F9 key to start adding QSO to the log. etc. etc.

I really wish it was possible to switch this off.

Björn SM7IUN


2016-07-02 3:36 GMT+02:00 Dan Violette <dank...@socal.rr.com>:
> Bjorn, Tested mine.  It does it too.  Plays the "asterisk" sound from 
> Windows.  Have not had 2 sound cards long so never really paid attention to 
> it.  My theme plays a quiet "strum" that would hardly be heard over the RTTY 
> and monitor I usually listen to at the same time.  Don't contest with DX4WIN 
> so never really noticed.
>
> Dan KI6X
>
> -Original Message-
> From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Björn 
> Ekelund
> Sent: Friday, July 1, 2016 12:41 AM
> To: dx4win@mailman.qth.net
> Subject: Re: [Dx4win] MMTTY
>
> Hi List,
>
> Thank you for all the responses.
>
> I now know %X/%e are valid macro tokens used to switch on/off FSK 
> transmission in the DX4Win GUI for MMTTY.
>
> However the "ding mystery" remains unsolved.
>
> I have made the following observations:
>
> The loudspeaker ding is associated with using the %X token (start FSK
> transmission) in a function key macro (e.g. F1). The %e (stop
> transmission) creates no ding.
>
> The actual sound made is called "Windows Background" and is also used e.g. 
> when changing the Windows loudspeaker volume using the mouse in the system 
> tray.
>
> I have confirmed the issue on three different installations; A HP Pavilion 
> Desktop running Swedish Windows 10, an ASUS UL-30VT Laptop running Swedish 
> Windows 7 and an HP Folio Laptop running English Windows 7.
>
> The ding sound comes through Windows' general audio channel, not the 
> communications audio channel (which is used for e.g. the FSK audio from 
> MMTTY). If you use an extra sound card (like I ended up doing) the ding will 
> come through your loudspeakers and just annoy you.
> However, more severely, if you use the PC's built-in sound card for the FSK 
> signal the ding will overlay with the FSK and distort the first few 
> characters of ALL your transmissions.
>
> I have tried different settings in "keying setup" Alt-S with no effect.
>
> I have tried placing the MMTTY executable in the default place (c:\program 
> files\mmtty instead of c:\ham\mmtty where it is installed by default) with no 
> effect
>
> I have tried changing the settings on most things I find in the Preferences 
> drop down with no effect.
>
> I have also played around with the standalone version of MMTTY and it shows 
> no such behavior (it uses backslash "\" as a token to turn on and off 
> transmission in function key macros.)
>
> Am I alone in seeing this?
>
> Björn SM7IUN
>
>
> 2016-06-30 19:07 GMT+02:00 Björn Ekelund <bj...@ekelund.nu>:
>> Hi all,
>>
>> I have two questions relating to the MMTTY Window:
>>
>> 1. Where is the complete list of %macros? I can't seem to find it
>> anywhere in the help file or on the web. E.g. the %X macro that starts
>> transmission or the %M macro that I don't know the meaning of.
>>
>> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when
>> executing the %X macro, e.g. in a CQ macro?
>>
>> thanks in advance,
>>
>> Björn
>> SM7IUN
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Dan Violette]

Bjorn, Tested mine.  It does it too.  Plays the "asterisk" sound from Windows.  
Have not had 2 sound cards long so never really paid attention to it.  My theme 
plays a quiet "strum" that would hardly be heard over the RTTY and monitor I 
usually listen to at the same time.  Don't contest with DX4WIN so never really 
noticed.

Dan KI6X 

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Björn Ekelund
Sent: Friday, July 1, 2016 12:41 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] MMTTY

Hi List,

Thank you for all the responses.

I now know %X/%e are valid macro tokens used to switch on/off FSK transmission 
in the DX4Win GUI for MMTTY.

However the "ding mystery" remains unsolved.

I have made the following observations:

The loudspeaker ding is associated with using the %X token (start FSK
transmission) in a function key macro (e.g. F1). The %e (stop
transmission) creates no ding.

The actual sound made is called "Windows Background" and is also used e.g. when 
changing the Windows loudspeaker volume using the mouse in the system tray.

I have confirmed the issue on three different installations; A HP Pavilion 
Desktop running Swedish Windows 10, an ASUS UL-30VT Laptop running Swedish 
Windows 7 and an HP Folio Laptop running English Windows 7.

The ding sound comes through Windows' general audio channel, not the 
communications audio channel (which is used for e.g. the FSK audio from MMTTY). 
If you use an extra sound card (like I ended up doing) the ding will come 
through your loudspeakers and just annoy you.
However, more severely, if you use the PC's built-in sound card for the FSK 
signal the ding will overlay with the FSK and distort the first few characters 
of ALL your transmissions.

I have tried different settings in "keying setup" Alt-S with no effect.

I have tried placing the MMTTY executable in the default place (c:\program 
files\mmtty instead of c:\ham\mmtty where it is installed by default) with no 
effect

I have tried changing the settings on most things I find in the Preferences 
drop down with no effect.

I have also played around with the standalone version of MMTTY and it shows no 
such behavior (it uses backslash "\" as a token to turn on and off transmission 
in function key macros.)

Am I alone in seeing this?

Björn SM7IUN


2016-06-30 19:07 GMT+02:00 Björn Ekelund <bj...@ekelund.nu>:
> Hi all,
>
> I have two questions relating to the MMTTY Window:
>
> 1. Where is the complete list of %macros? I can't seem to find it 
> anywhere in the help file or on the web. E.g. the %X macro that starts 
> transmission or the %M macro that I don't know the meaning of.
>
> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when 
> executing the %X macro, e.g. in a CQ macro?
>
> thanks in advance,
>
> Björn
> SM7IUN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Björn Ekelund]

Hi List,

Thank you for all the responses.

I now know %X/%e are valid macro tokens used to switch on/off FSK
transmission in the DX4Win GUI for MMTTY.

However the "ding mystery" remains unsolved.

I have made the following observations:

The loudspeaker ding is associated with using the %X token (start FSK
transmission) in a function key macro (e.g. F1). The %e (stop
transmission) creates no ding.

The actual sound made is called "Windows Background" and is also used
e.g. when changing the Windows loudspeaker volume using the mouse in
the system tray.

I have confirmed the issue on three different installations; A HP
Pavilion Desktop running Swedish Windows 10, an ASUS UL-30VT Laptop
running Swedish Windows 7 and an HP Folio Laptop running English
Windows 7.

The ding sound comes through Windows' general audio channel, not the
communications audio channel (which is used for e.g. the FSK audio
from MMTTY). If you use an extra sound card (like I ended up doing)
the ding will come through your loudspeakers and just annoy you.
However, more severely, if you use the PC's built-in sound card for
the FSK signal the ding will overlay with the FSK and distort the
first few characters of ALL your transmissions.

I have tried different settings in "keying setup" Alt-S with no effect.

I have tried placing the MMTTY executable in the default place
(c:\program files\mmtty instead of c:\ham\mmtty where it is installed
by default) with no effect

I have tried changing the settings on most things I find in the
Preferences drop down with no effect.

I have also played around with the standalone version of MMTTY and it
shows no such behavior (it uses backslash "\" as a token to turn on
and off transmission in function key macros.)

Am I alone in seeing this?

Björn SM7IUN


2016-06-30 19:07 GMT+02:00 Björn Ekelund :
> Hi all,
>
> I have two questions relating to the MMTTY Window:
>
> 1. Where is the complete list of %macros? I can't seem to find it
> anywhere in the help file or on the web. E.g. the %X macro that starts
> transmission or the %M macro that I don't know the meaning of.
>
> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when
> executing the %X macro, e.g. in a CQ macro?
>
> thanks in advance,
>
> Björn
> SM7IUN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Björn Ekelund]

Thanks for the response Joe,

I believe your answer relates to the MMTTY GUI front end, not the
DX4WIN front end.
In that the backslash is used to switch on/off transmission and using
%X may result in an error.

However, the DX4Win GUI for MMTTY has a different set of macro
definitions and Paul KK4HD guided me
to the right spot in the help section where it says that "%capital
letter" means control character
which then mean e.g. %M=CRLF and %X is start FSK transmission.

Now, the problem is that the %X macro does two things - switch on FSK
transmission and produce a loud
"error ding" in the system sound loudspeaker.

This ding does indeed sound just like an error ding. But the %X macro
is valid and does turn on the FSK transmission.
The ding is very unfortunate if you connect your transceiver to the
PC's built in sound card, it will go straight into the air.
If you have a separate sound card for DIGIMODES then it creates an
annyoing ding in your loudspeakers instead.

So I would really like to get rid of it. If I knew how.

Thanks,

Björn SM7IUN


2016-06-30 19:29 GMT+02:00 Joe Subich, W4TV :
>
>> 1. Where is the complete list of %macros?
> Macro Commands List in the MITTY help file ("MITTY.chm").
> Also the "commands" button in the MITTY macro editor (right
> click on a macro to edit).
>
>> the %X macro that starts transmission
>
> There is no %X macro
>
>> or the %M macro that I don't know the meaning of.
>
> From the help file: "The contest number portion in My EST."
>
>> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when
>> executing the %X macro, e.g. in a CW macro?
>
> Stop using an invalid macro symbol.  The "ding" is the *ERROR* sound.
>
>
>
> 73,
>
>... Joe, W4TV
>
> On 6/30/2016 1:07 PM, Björn Ekelund wrote:
>>
>> Hi all,
>>
>> I have two questions relating to the MMTTY Window:
>>
>> 1. Where is the complete list of %macros? I can't seem to find it
>> anywhere in the help file or on the web. E.g. the %X macro that starts
>> transmission or the %M macro that I don't know the meaning of.
>>
>> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when
>> executing the %X macro, e.g. in a CQ macro?
>>
>> thanks in advance,
>>
>> Björn
>> SM7IUN
>> __
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Paul van der Eijk]

Press F1 (for help)
Search for "macro" (without the quotes.)

A click on the first entry will show you a list for the function keys.
The other entries may be of help too!

--Paul, KK4HD

On Thu, Jun 30, 2016 at 1:07 PM, Björn Ekelund  wrote:
> Hi all,
>
> I have two questions relating to the MMTTY Window:
>
> 1. Where is the complete list of %macros? I can't seem to find it
> anywhere in the help file or on the web. E.g. the %X macro that starts
> transmission or the %M macro that I don't know the meaning of.
>
> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when
> executing the %X macro, e.g. in a CQ macro?
>
> thanks in advance,
>
> Björn
> SM7IUN
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Joe Subich, W4TV]

> 1. Where is the complete list of %macros?
Macro Commands List in the MITTY help file ("MITTY.chm").
Also the "commands" button in the MITTY macro editor (right
click on a macro to edit).

> the %X macro that starts transmission

There is no %X macro

> or the %M macro that I don't know the meaning of.

From the help file: "The contest number portion in My EST."

> 2. Is there a way to avoid/disable the "ding" in the loudspeaker when
> executing the %X macro, e.g. in a CW macro?

Stop using an invalid macro symbol.  The "ding" is the *ERROR* sound.



73,

   ... Joe, W4TV

On 6/30/2016 1:07 PM, Björn Ekelund wrote:

Hi all,

I have two questions relating to the MMTTY Window:

1. Where is the complete list of %macros? I can't seem to find it
anywhere in the help file or on the web. E.g. the %X macro that starts
transmission or the %M macro that I don't know the meaning of.

2. Is there a way to avoid/disable the "ding" in the loudspeaker when
executing the %X macro, e.g. in a CQ macro?

thanks in advance,

Björn
SM7IUN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY

[Björn Ekelund]

Hi all,

I have two questions relating to the MMTTY Window:

1. Where is the complete list of %macros? I can't seem to find it
anywhere in the help file or on the web. E.g. the %X macro that starts
transmission or the %M macro that I don't know the meaning of.

2. Is there a way to avoid/disable the "ding" in the loudspeaker when
executing the %X macro, e.g. in a CQ macro?

thanks in advance,

Björn
SM7IUN
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY setup

[wo2n]

Hi trying to setup MMTTY as per dx4win but the link is Not working?
The MMTTY program is not included as part of DX4WIN; you will need to
download and install the program separately. Visit the MMTTY website to
download the software at http://mmhamsoft.amateur-radio.ca/mmtty.
Anyone have a webpage that works?
Tnx,
Bernie/WO2N.>



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY setup

[Dave Perry, N4QS]

Try this one:

http://hamsoft.ca/pages/mmtty.php

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of
w...@att.net
Sent: Saturday, January 23, 2016 1:31 PM
To: dx4win@mailman. qth. net 
Subject: [Dx4win] MMTTY setup

Hi trying to setup MMTTY as per dx4win but the link is Not working?
The MMTTY program is not included as part of DX4WIN; you will need to
download and install the program separately. Visit the MMTTY website to
download the software at http://mmhamsoft.amateur-radio.ca/mmtty.
Anyone have a webpage that works?
Tnx,
Bernie/WO2N.>



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY in DX4WIN 8.05

[Mark Endorf]

I just loaded DX4WIN 8.05, and when launching MMTTY is gives an error
indicating it can't start MMTTY. Still works in older DX4WIN version?

Any ideas?

Thanks

Mark 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] mmtty

[Joe Subich, W4TV]

Cort,

As always, start with the example configuration for DX4Win and MK II
from microHAM.  In Router (Help | Download Documents) or on-line in
the MK II area at www.microham-USA.com/support.html.

DX4Win's support for MMTTY is a bit strange in FSK in that you must
run MMTTY stand alone from the same path as used in DX4Win to configure
the FSK port and set Configure MMTTY | MISC | TX Port to COM-TxD(FSK)
because there is no way to pass the port/FSK setting from the DX4Win
MMTTY window.

73,

   ... Joe, W4TV


On 2015-02-03 9:21 AM, Courtney Judd wrote:

I have a question for you all... I am using FT2000D with microHam2 to
WIN 7 PRO with Writelog and DX4WIN with MMTTY add on. Works great with
Writelog but no dice with DX4WIn. MMTTY is located in
C:\ham\mmtty\mmtty.exe and i use a virtual port 7 ... this works great
with Writelog but when I select mmtty in DX4WIN from log entry/
window/mmtty I get a window that says mmtty could not be started, click
ok and an empty mmtty window opens that is empty and non-responsive. In
DX4WIN's preference under RTTY I have the above address shown at the
bottom in the MMTTY window, com port 7, type = none! Any ideas of what
to try? thanks Cort K4WI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] mmtty

[Courtney Judd]

found another isue very similiar. I tried to get DX4WIN to use WINKEY 
which works great in Writelog using the key or F messages. In DX4WIN the 
key will work but when you open the keyboard window a message pops up 
saying that it could not open the winkey port... something in DX4WIN is 
not working with the router... ideas? Cort

Joe Subich, W4TV mailto:li...@subich.com
Tuesday, February 03, 2015 9:00 AM

Cort,

As always, start with the example configuration for DX4Win and MK II
from microHAM.  In Router (Help | Download Documents) or on-line in
the MK II area at www.microham-USA.com/support.html.

DX4Win's support for MMTTY is a bit strange in FSK in that you must
run MMTTY stand alone from the same path as used in DX4Win to configure
the FSK port and set Configure MMTTY | MISC | TX Port to COM-TxD(FSK)
because there is no way to pass the port/FSK setting from the DX4Win
MMTTY window.

73,

   ... Joe, W4TV



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] mmtty

[Courtney Judd]

I have a question for you all... I am using FT2000D with microHam2 to 
WIN 7 PRO with Writelog and DX4WIN with MMTTY add on. Works great with 
Writelog but no dice with DX4WIn. MMTTY is located in 
C:\ham\mmtty\mmtty.exe and i use a virtual port 7 ... this works great 
with Writelog but when I select mmtty in DX4WIN from log entry/ 
window/mmtty I get a window that says mmtty could not be started, click 
ok and an empty mmtty window opens that is empty and non-responsive. In 
DX4WIN's preference under RTTY I have the above address shown at the 
bottom in the MMTTY window, com port 7, type = none! Any ideas of what 
to try? thanks Cort K4WI

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] mmtty

[John Shaw]

 If it is any consolation both these issues will be configuration problems.
I have used MMTTY and WINKEY with DXWIN through a MKII for years and have
10's of thousands of QSO's in the log with this setup.  I'd be the first to
admit that DX4WIN could do with some improvement in this area but it does
all work.  The key is to be consistent and make sure each part of the chain
has the same instructions.  Follow the setups in the MKII help, they work.

73 John ZL1BYZ

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney
Judd
Sent: Wednesday, 4 February 2015 05:50
To: Joe Subich, W4TV; Dx4win@mailman.qth.net
Subject: Re: [Dx4win] mmtty


found another isue very similiar. I tried to get DX4WIN to use WINKEY which
works great in Writelog using the key or F messages. In DX4WIN the key will
work but when you open the keyboard window a message pops up saying that it
could not open the winkey port... something in DX4WIN is not working with
the router... ideas? Cort
 Joe Subich, W4TV mailto:li...@subich.com Tuesday, February 03, 2015 
 9:00 AM

 Cort,

 As always, start with the example configuration for DX4Win and MK II 
 from microHAM.  In Router (Help | Download Documents) or on-line in 
 the MK II area at www.microham-USA.com/support.html.

 DX4Win's support for MMTTY is a bit strange in FSK in that you must 
 run MMTTY stand alone from the same path as used in DX4Win to 
 configure the FSK port and set Configure MMTTY | MISC | TX Port to
COM-TxD(FSK)
 because there is no way to pass the port/FSK setting from the DX4Win 
 MMTTY window.

 73,

... Joe, W4TV



 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net Please help support this email 
 list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] mmtty

[Courtney Judd]

hi George, thanks for the reply. I am using microkeyer2 to usb to win7 
pro and DX4WIN. The preference CW tab has Device type set to WinKey, 
Interface set to com4, external keyer set to com4. When you select 
keyboard keyer window in DX4WIN, a window opens with can not open com 
port 4. I am having the same issues trying to get DX4WIN to open MMTTY 
and Settings in the microham router are set as spec in help file and 
nothing works with DX4WIN. Stand alone and Writelog, both winkey and 
MMTTY work perfectly... so it is an issue with DX4WIN and microham 
router... I just don't know how to resolve! thanks, Cort K4WI



George mailto:goofy...@rochester.rr.com
Tuesday, February 03, 2015 12:47 PM
Cort;
I have my WinKey connected to my Kenwood TS-990 and using DX4WIN. The 
set-up has been working fine for over 1 year now when I run my remote 
operation. You must have Com port communications from your computer to 
the WinKey and that Com port assigned in DX4WIN preferences, CW tab.

The device type is set to WinKey.
External Keyer is set to the Com port that is communicating with the 
WinKey.

I suspect you do not have the WinKey talking to the computers com port.
George  W2YJ





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] mmtty

[Joe Subich, W4TV]

 so it is an issue with DX4WIN and microham router...

No, it is a configuration issue in DX4Win.

 The preference CW tab has Device type set to WinKey,
 Interface set to com4, external keyer set to com4.

You have configured *two devices* to the same port.  Software CW keying/
PTT control and External keyer *MUST BE DIFFERENT PORT NUMBERS* as in
the example document.  External Keyer port is the one used for Winkey
and must match the Winkey port in microHAM Router.

You probably have a similar issue with MMTTY if you have set a port
for RTTY interface (RTTY Interface =None).  There is *no port set* for
MMTTY in DX4Win - it is set only in MMTTY.

73,

   ... Joe, W4TV


On 2015-02-03 2:08 PM, Courtney Judd wrote:

hi George, thanks for the reply. I am using microkeyer2 to usb to win7
pro and DX4WIN. The preference CW tab has Device type set to WinKey,
Interface set to com4, external keyer set to com4. When you select
keyboard keyer window in DX4WIN, a window opens with can not open com
port 4. I am having the same issues trying to get DX4WIN to open MMTTY
and Settings in the microham router are set as spec in help file and
nothing works with DX4WIN. Stand alone and Writelog, both winkey and
MMTTY work perfectly... so it is an issue with DX4WIN and microham
router... I just don't know how to resolve! thanks, Cort K4WI


George mailto:goofy...@rochester.rr.com
Tuesday, February 03, 2015 12:47 PM
Cort;
I have my WinKey connected to my Kenwood TS-990 and using DX4WIN. The
set-up has been working fine for over 1 year now when I run my remote
operation. You must have Com port communications from your computer to
the WinKey and that Com port assigned in DX4WIN preferences, CW tab.
The device type is set to WinKey.
External Keyer is set to the Com port that is communicating with the
WinKey.
I suspect you do not have the WinKey talking to the computers com port.
George  W2YJ





__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] mmtty

[Joe Subich, W4TV]

 something in DX4WIN is not working with the router... ideas?

No ideas.  When I prepared the example documents everything was
working exactly as documented with DX4Win 8.05 which was the then
current working demo.  I did not install the demo on my newer
systems and could not test with any newer software in any case.

The typical cause of a can not open port message is an improper
configuration - more than one program accessing the same port - or
a port conflict - attempt to define a hardware port and virtual
port to the same number.

73,

   ... Joe, W4TV


On 2015-02-03 11:49 AM, Courtney Judd wrote:


found another isue very similiar. I tried to get DX4WIN to use WINKEY
which works great in Writelog using the key or F messages. In DX4WIN the
key will work but when you open the keyboard window a message pops up
saying that it could not open the winkey port... something in DX4WIN is
not working with the router... ideas? Cort

Joe Subich, W4TV mailto:li...@subich.com
Tuesday, February 03, 2015 9:00 AM

Cort,

As always, start with the example configuration for DX4Win and MK II
from microHAM.  In Router (Help | Download Documents) or on-line in
the MK II area at www.microham-USA.com/support.html.

DX4Win's support for MMTTY is a bit strange in FSK in that you must
run MMTTY stand alone from the same path as used in DX4Win to configure
the FSK port and set Configure MMTTY | MISC | TX Port to COM-TxD(FSK)
because there is no way to pass the port/FSK setting from the DX4Win
MMTTY window.

73,

   ... Joe, W4TV



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY within DX4WIN

[Jim Reisert AD1C]

On Wed, Oct 22, 2014 at 8:24 AM,  Bruce WD4NGB wrote:

 In the stand alone MMTTY, there are provisions to repeat the macro at
 certain intervals in the group 1 macros, (the ones at the top).

 Is there a way to add this string to a macro in the MMTTY that is part of
 DX4WIN?

I don't think so.  Does anyone know if the keyboard (ALT-K) can repeat
[under DX4WIN control]?  If so, it might be something Paul can add for
RTTY in a future edition.

- Jim

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY within DX4WIN

[wd4ngb]

In the stand alone MMTTY, there are provisions to repeat the macro at 
certain intervals in the group 1 macros, (the ones at the top).


Is there a way to add this string to a macro in the MMTTY that is part 
of DX4WIN?


Bruce WD4NGB
http://brucerichards.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[Bud Semon N7CW]

Hi John

Here are a couple things to check:

Is the path to MMTTY on the RTTY tab in Preferences correct?  Mine
is c:\program files (x86)\mmtty\mmtty.exe.

I have struggled with Win 7 saving some files as Compatibility Files,
which I have yet to fully understand.  In any case, sometimes files end up
in the wrong folder and then programs such as DX4Win can't find them.

Good luck.

73, Bud  N7CW

On Thu, Oct 11, 2012 at 9:36 PM, W9RPM j...@w9rpm.com wrote:

 Hi, I am trying to get MMTTY going in DX4WIN. I am running Windows 7.
 Ran fine on old machine. Seems  to be in the right place, but just get a
 window in DX4WIN when I try and run it that, MTTY could not be started.
 Thanks, John

 --
 EMAIL: j...@w9rpm.com
 WEBPAGE: http://www.w9rpm.com/
 Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
 DX and CONTEST CLUB: http://www.w9idx.com/
 La Crosse Hams: http://www.lacrossehams.org/
 AOL IM: W9RPM
 YAHOO: W9RPM

 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[W9RPM]

Bud, thanks. I tried that, and still won't start. Had no problem before, 
so will keep trying to figure it out. 73 John
On 10/12/2012 8:47 AM, Bud Semon N7CW wrote:
   c:\program files (x86)\mmtty\mmtty.exe

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com/
La Crosse Hams: http://www.lacrossehams.org/
AOL IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[John, K9EL]

Do you have DX4Win at the C:\ Level?   If it is in Program Files, Win7
blocks the program from taking a lot of actions on your computer.

 
73, John
K9EL
 
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of W9RPM
Sent: Friday, October 12, 2012 12:04 PM
To: Bud Semon N7CW
Cc: DX4WIN
Subject: Re: [Dx4win] MMTTY

Bud, thanks. I tried that, and still won't start. Had no problem before, 
so will keep trying to figure it out. 73 John
On 10/12/2012 8:47 AM, Bud Semon N7CW wrote:
   c:\program files (x86)\mmtty\mmtty.exe

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com/
La Crosse Hams: http://www.lacrossehams.org/
AOL IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY

[W9RPM]

Hi, I am trying to get MMTTY going in DX4WIN. I am running Windows 7. 
Ran fine on old machine. Seems  to be in the right place, but just get a 
window in DX4WIN when I try and run it that, MTTY could not be started. 
Thanks, John

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/
DX and CONTEST CLUB: http://www.w9idx.com/
La Crosse Hams: http://www.lacrossehams.org/
AOL IM: W9RPM
YAHOO: W9RPM

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY

[PY2YP]

Is there any set to have MMTTY control panel window always on top? The 
MMTTY engine version is 1.68a, DX4WIN is 8.05.

Thanks in advance.

-- 
73 DX de PY2YP - Cesar

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[N4QS]

This if from the N1MM Help file:
Stay on Top

You can make MMTTY stay on top of other programs until it is minimized with 
its own minimize button. Usually, this is done when MMTTY is a window that 
is smaller than the full screen.

Click Option | Setup TNC emulation and check Stay on top.

I think you have to exit out of MMTTY in DX4WIN and open the full version of 
MMTTY to get to this setting.

Dave, N4QS



- Original Message - 
From: PY2YP py...@py2yp.com
To: Dx4win@mailman.qth.net
Sent: Sunday, June 24, 2012 6:40 AM
Subject: [Dx4win] MMTTY


 Is there any set to have MMTTY control panel window always on top? The
 MMTTY engine version is 1.68a, DX4WIN is 8.05.

 Thanks in advance.

 -- 
 73 DX de PY2YP - Cesar

 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[N4QS]

My mistake.  I meant the MMTTY help file.  Dave

- Original Message - 
From: N4QS n...@comcast.net
To: PY2YP py...@py2yp.com; Dx4win@mailman.qth.net
Sent: Sunday, June 24, 2012 1:41 PM
Subject: Re: [Dx4win] MMTTY


 This if from the N1MM Help file:
 Stay on Top

 You can make MMTTY stay on top of other programs until it is minimized 
 with
 its own minimize button. Usually, this is done when MMTTY is a window that
 is smaller than the full screen.

 Click Option | Setup TNC emulation and check Stay on top.

 I think you have to exit out of MMTTY in DX4WIN and open the full version 
 of
 MMTTY to get to this setting.

 Dave, N4QS



 - Original Message - 
 From: PY2YP py...@py2yp.com
 To: Dx4win@mailman.qth.net
 Sent: Sunday, June 24, 2012 6:40 AM
 Subject: [Dx4win] MMTTY


 Is there any set to have MMTTY control panel window always on top? The
 MMTTY engine version is 1.68a, DX4WIN is 8.05.

 Thanks in advance.

 -- 
 73 DX de PY2YP - Cesar

 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[ON4AOI]

Hi John,
Make sure that the link (path where MMTTY is located)
in your preferences is still correct 



Guy ON4AOI

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens W9RPM
Verzonden: maandag 30 april 2012 6:28
Aan: DX4WIN
Onderwerp: [Dx4win] MMTTY

For some reason MMTTY isn't working. Try to start it in DX4WIN and a window
pops up and says MMTTY could not be started. Did a search, and its not
there. Any idea of how i can get it running again. Thanks, John

--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST
CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL
IM: W9RPM
YAHOO: W9RPM


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY

[ON4AOI]

John,
You have to download and install MMTTY yourself
It is not distributed or installed by DX4WIN

Guy ON4AOI 

-Oorspronkelijk bericht-
Van: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
Namens W9RPM
Verzonden: maandag 30 april 2012 6:28
Aan: DX4WIN
Onderwerp: [Dx4win] MMTTY

For some reason MMTTY isn't working. Try to start it in DX4WIN and a window
pops up and says MMTTY could not be started. Did a search, and its not
there. Any idea of how i can get it running again. Thanks, John

--
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
Wisconsin VHF/UHF County Hunters: http://www.wivuch.com/ DX and CONTEST
CLUB: http://www.w9idx.com/ La Crosse Hams: http://www.lacrossehams.org/ AOL
IM: W9RPM
YAHOO: W9RPM


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

[Ing . Miloš Prostecký]

If you are using in Yaesu rigs high tones (2125Hz) than you must use reverse
mode for transmitting. It is possibe to adjust it in YAESU menu rtty T
PLRTY or in Router
setup.

That is for RTTY LSB!

73,

Milos, OK1MP


--

Message: 1
Date: Mon, 19 Mar 2012 12:43:23 -0700 (PDT)
From: Radivoj Kar, F6GNZ f6...@yahoo.com
Subject: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer
To: DX4WIN Refelector dx4win@mailman.qth.net
Message-ID:
1332186203.53733.yahoomail...@web110304.mail.gq1.yahoo.com
Content-Type: text/plain; charset=utf-8

I've decided to try FSK (no AFSK) with microHAM keyer and have configured
router, DX4WIN and associated MMTTY for FSK as indicated in Router
documentation. RX is ok, on TX FSK COM5 port well indicates 45.5N1.5 and my
FT1000MP goes to transmitt in RTTY LSB mode, I can change output power and
MMTTY display shows normal RTTY display at TX, but nobody answers my calls
on their frequency ! I have no test bench nor another RX at hand to check
what might be happening. Has anybody an idea what's going on??? 
73, Radi F6GNZ


--

Message: 2
Date: Mon, 19 Mar 2012 16:05:50 -0400
From: Joe Subich, W4TV li...@subich.com
Subject: Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer
To: dx4win@mailman.qth.net
Message-ID: 4f67919e.5090...@subich.com
Content-Type: text/plain; charset=ISO-8859-1; format=flowed


 I can change output power and MMTTY display shows normal RTTY
 display at TX, but nobody answers my calls on their frequency !

Do you have another receiver to determine if you have set up the
FT-1000MP correctly?  As shipped from Yaesu (default), almost all
Yaesu transceivers (including all models of the FT-1000 series)
will transmit upside down in RTTY.  It generally necessary to
set Menu 6-1 (FT-1000MP, MK V, etc.) to REV or DIP switch 5
(FT-1000, FT-1000D) to 0 for the resulting FSK to be right
side up.

73,

... Joe, W4TV


On 3/19/2012 3:43 PM, Radivoj Kar, F6GNZ wrote:
 I've decided to try FSK (no AFSK) with microHAM keyer and have
configured router, DX4WIN and associated MMTTY for FSK as indicated in
Router documentation. RX is ok, on TX FSK COM5 port well indicates
45.5N1.5 and my FT1000MP goes to transmitt in RTTY LSB mode, I can
change output power and MMTTY display shows normal RTTY display at TX,
but nobody answers my calls on their frequency ! I have no test bench
nor another RX at hand to check what might be happening. Has anybody an
idea what's going on???
 73, Radi F6GNZ
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html



--

Message: 3
Date: Tue, 20 Mar 2012 09:11:36 +1300
From: John Shaw jns...@compassnet.co.nz
Subject: Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer
To: dx4win@mailman.qth.net
Message-ID: 4CBA5635B77F421CA23A3DC401BE5E8F@john8c10
Content-Type: text/plain;   charset=us-ascii

 Radi,

One of the mysteries if RTTY. Mr Yaesu thinks normal RTTY is USB, this is a
great RTTY debate for another day perhaps.  I am guessing you RTTY signals
are reversed. So either operate RTTY USB or in the FT1000MP there is a menu
6-1 that allows you to reverse the RTTY which will allow you to continue
RTTY LSB.

73 John ZL1BYZ.

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Radivoj Kar, F6GNZ
Sent: Tuesday, 20 March 2012 08:43
To: DX4WIN Refelector
Subject: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

I've decided to try FSK (no AFSK) with microHAM keyer and have configured
router, DX4WIN and associated MMTTY for FSK as indicated in Router
documentation. RX is ok, on TX FSK COM5 port well indicates 45.5N1.5 and my
FT1000MP goes to transmitt in RTTY LSB mode, I can change output power and
MMTTY display shows normal RTTY display at TX, but nobody answers my calls
on their frequency ! I have no test bench nor another RX at hand to check
what might be happening. Has anybody an idea what's going on??? 
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




--

___
DX4WIN mailing list
DX4WIN@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win


End of DX4WIN Digest, Vol 95, Issue 22
**

__
DX4WIN mailing list
Home: http

[Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

[Radivoj Kar, F6GNZ]

I've decided to try FSK (no AFSK) with microHAM keyer and have configured 
router, DX4WIN and associated MMTTY for FSK as indicated in Router 
documentation. RX is ok, on TX FSK COM5 port well indicates 45.5N1.5 and my 
FT1000MP goes to transmitt in RTTY LSB mode, I can change output power and 
MMTTY display shows normal RTTY display at TX, but nobody answers my calls on 
their frequency ! I have no test bench nor another RX at hand to check what 
might be happening. Has anybody an idea what's going on??? 
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

[Joe Subich, W4TV]

 I can change output power and MMTTY display shows normal RTTY
 display at TX, but nobody answers my calls on their frequency !

Do you have another receiver to determine if you have set up the
FT-1000MP correctly?  As shipped from Yaesu (default), almost all
Yaesu transceivers (including all models of the FT-1000 series)
will transmit upside down in RTTY.  It generally necessary to
set Menu 6-1 (FT-1000MP, MK V, etc.) to REV or DIP switch 5
(FT-1000, FT-1000D) to 0 for the resulting FSK to be right
side up.

73,

... Joe, W4TV


On 3/19/2012 3:43 PM, Radivoj Kar, F6GNZ wrote:
 I've decided to try FSK (no AFSK) with microHAM keyer and have
configured router, DX4WIN and associated MMTTY for FSK as indicated in
Router documentation. RX is ok, on TX FSK COM5 port well indicates
45.5N1.5 and my FT1000MP goes to transmitt in RTTY LSB mode, I can
change output power and MMTTY display shows normal RTTY display at TX,
but nobody answers my calls on their frequency ! I have no test bench
nor another RX at hand to check what might be happening. Has anybody an
idea what's going on???
 73, Radi F6GNZ
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

[John Shaw]

 Radi,

One of the mysteries if RTTY. Mr Yaesu thinks normal RTTY is USB, this is a
great RTTY debate for another day perhaps.  I am guessing you RTTY signals
are reversed. So either operate RTTY USB or in the FT1000MP there is a menu
6-1 that allows you to reverse the RTTY which will allow you to continue
RTTY LSB.

73 John ZL1BYZ.

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Radivoj Kar, F6GNZ
Sent: Tuesday, 20 March 2012 08:43
To: DX4WIN Refelector
Subject: [Dx4win] FSK RTTY with DX4WIN/MMTTY and microKeyer

I've decided to try FSK (no AFSK) with microHAM keyer and have configured
router, DX4WIN and associated MMTTY for FSK as indicated in Router
documentation. RX is ok, on TX FSK COM5 port well indicates 45.5N1.5 and my
FT1000MP goes to transmitt in RTTY LSB mode, I can change output power and
MMTTY display shows normal RTTY display at TX, but nobody answers my calls
on their frequency ! I have no test bench nor another RX at hand to check
what might be happening. Has anybody an idea what's going on??? 
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY error

[Dave Earnest]

MMTTY works great standalone. Something has changed in my DX4WIN, though. MMTTY 
was previously working o.k. Now when I try to transmit, transmit occurs with 
diddle, but I get the error message: 
An exception occured. 
i.e., Device already open. 
I don't know what device is referred to. I did not leave MMTTY standalone 
running, I closed it. 
IDEAS? 
Tnx  73rds, 
Dave, K7JJ
Dave Earnest


Dave Earnest
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY error

[Isidro Acosta Hern�ndez]

Dave:

 MMTTY works great standalone. Something has changed in my DX4WIN, though.
 MMTTY was previously working o.k. Now when I try to transmit, transmit
 occurs with diddle, but I get the error message:
 An exception occured.
 i.e., Device already open.
 I don't know what device is referred to. I did not leave MMTTY standalone
 running, I closed it.
 IDEAS?

Make sure DX4WIN is not using the same port as MMTTY for another task (CW 
keying, cat, etc.)

73 and Season Greetings de Isidro, EA8NQ
E-mail:  ea8...@hotmail.com   (remove the _ )


Visit the EA8NQ's web page (in Spanish):
http://ea8nq.ure.es/
 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY and Radio Keying

[John, K9EL]

I have a similar setup but using a TS2000, The entire setup is located in a
remote location and used over the internet.

I use one serial port that talks to DX4Win and the Kenwood Radio Control
software.  This is done by using Port Splitter software.  One serial port
can be used to feed multiple pieces of software.

I use a second serial port that is tied to MMTTY for FSK keying using the
simple 2 transistor interface as described on AA5AU's site.

MMTTY is fully integrated with DX4Win and I can key the radio using either
MMTTY or the radio control software.

73, John
K9EL
-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Dan Violette
Sent: Friday, November 25, 2011 9:19 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] MMTTY and Radio Keying

I had MMTTY working fine with AFSK/VOX but prefer FSK (no Windows sounds
going out with one sound card in use, radio filters are set-up better,
etc.).  I built the serial FSK  PTT ( CW while at it) interface.  Got
MMTTY working alone great with software keying by the radio interface and
FSK (only one wire from serial port to FSK) with the other serial port for
the radio control (Kenwood TS-850).

 

I cannot find a way at all to carry the radio interface software command
keying to DX4WIN.  DX4WIN works fine with the PTT keying by the second
serial port (the one with FSK, not the radio), but 2 reasons I much prefer
the other (keying the radio by software commands via the radio serial port):

-  If I start DX4WIN in KAM mode to use my KAM for RTTY instead of
MMTTY, my radio locks in TX until I unplug PTT (might be able to find a DTR
or CTS high/low switch to turn that off).

-  My PTT connector had not been used for a few years on my radio
accessory wiring and has an intermittent which means I need to rework it
(but many wires out of the accessory jack and hard work).

 

So, if I explained this right, I am looking for help in using DX4WIN with
MMTTY, Radio Control on one serial port, FSK on another serial port and
Kenwood radio commands via the radio interface to put radio into TX.
Everything working except the last item (software keying).  If this cannot
be done, I would like to know where and if I can ask to have this added.
Sure works nice in stand-alone MMTTY where you can interface to the radio
and use FSK without the separate PTT line.

 

/Dan KI6X

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY and Radio Keying

[Dan Violette]

I had MMTTY working fine with AFSK/VOX but prefer FSK (no Windows sounds
going out with one sound card in use, radio filters are set-up better,
etc.).  I built the serial FSK  PTT ( CW while at it) interface.  Got
MMTTY working alone great with software keying by the radio interface and
FSK (only one wire from serial port to FSK) with the other serial port for
the radio control (Kenwood TS-850).

 

I cannot find a way at all to carry the radio interface software command
keying to DX4WIN.  DX4WIN works fine with the PTT keying by the second
serial port (the one with FSK, not the radio), but 2 reasons I much prefer
the other (keying the radio by software commands via the radio serial port):

-  If I start DX4WIN in KAM mode to use my KAM for RTTY instead of
MMTTY, my radio locks in TX until I unplug PTT (might be able to find a DTR
or CTS high/low switch to turn that off).

-  My PTT connector had not been used for a few years on my radio
accessory wiring and has an intermittent which means I need to rework it
(but many wires out of the accessory jack and hard work).

 

So, if I explained this right, I am looking for help in using DX4WIN with
MMTTY, Radio Control on one serial port, FSK on another serial port and
Kenwood radio commands via the radio interface to put radio into TX.
Everything working except the last item (software keying).  If this cannot
be done, I would like to know where and if I can ask to have this added.
Sure works nice in stand-alone MMTTY where you can interface to the radio
and use FSK without the separate PTT line.

 

/Dan KI6X

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY DX4WIN help needed

[Kostas Stamatis]

There is a setup guide by microham. In microham router go to help and after 
that check and download u3 dx4win setup guide. Follow this guide. As i know 
usb iii (and usb ii) is not capable to transmit on fsk. Mmtty alone is 
needed comfsk to make fsk. Writelog and n1mm also has a similar software 
interface to make the rig working fsk with these devices. Dx4win does not. 
So the only way is to run rtty like afsk. This in practice means that it 
doesnt work when you choose RTTY button in your rig but instead of this you 
should choose PKT-LSB (if it is yaesu) or something similar (what you use 
for PSK) or LSB if there is nothing similar in your radio.
73 Kostas sv1dpi

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY with Microham USB III Interface

[cw...@juno.com]

There was recent discussion here about using the Microham MK2R with DX4WIN with 
MMTTY receive function working OK but not transmitting.  I read the results but 
the MK2R and USB interface setups are different.  I'm sending out a carrier 
only.  I have N1MM setup to run MMTTY without a problem but can't seem to solve 
the DX4WIN.  Any suggestions would be appreciated.

73 from the desert,

Fred/NA2U

Wretched excess is just barely enough.


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY DX4WIN help needed

[cw...@juno.com]

There was recent discussion here about using the Microham MK2R with DX4WIN with 
MMTTY receive function working OK but not transmitting.  I read the results but 
the MK2R and USB interface setups are different.  I'm sending out a carrier 
only.  I have N1MM setup to run MMTTY without a problem but can't seem to solve 
the DX4WIN.  Any suggestions would be appreciated.

73 from the desert,

Fred/NA2U
Wretched excess is just barely enough.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY DX4WIN help needed

[Antonio Galiana]

Hi.
Many thanks to everyone who helped me to solve this problem.

From the begining I have followed the steps of MK2R+ and DX4WIN 8 setup
guide.
I spent my free time during one week going through the guide step by step,
repeatedly.

Guy suggested that I had installed the software twice. So I decided to:
- uninstall MTTY and delete the folder
- shut down the computer and run it again
- install latest version of the program (1.68A) from MM Hamsoft (THANKS!)
- Follow again step by step Kostas setup guide

...and finally, it works!
What happened?  Don't know, age does not forgive.

Again, big thanks to you guys, you are wonderful.

73 and QRV
Tony EA5BY


2011/4/22 Antonio Galiana ea5by.t...@gmail.com

 Hello Group.
 I Need some advice please:

 Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
 As hardware I have a Microham MK2R+ and FT1000D
 MK2R+ is conneceted via USB.

 If I run MMTTY as an standalone program all works fine, in the FT1000D I
 use RTTY/LSB and I can work RTTY perfectly.

 Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to send
 RTTY the transceiver goes into TX but just a continuous carrier. Nothing
 else. (RTTY/LSB selected)
 If I choose PKT/LSB I can both RX  TX without problem but then when real
 time logging, PACK mode appears in DX4 logging window.

 One thing that it could be important (??) is that when DX4WIN is running
 and I go to the RTTY Control panel window  SETUP (O), in the MMTTY MISC
 tab, into the TX-PORT box, only Sound is marked, others are greyed out.
 But running MMTTY as standalone, the TX-PORT Box shows COM-TxD(FSK) and USB
 port Limited Speed.

 Any idea?  This issue is driving me crazy...


 --
 *73 de Tony*
 *EA5BY
 Skype: ea5by.tony

 *


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY DX4WIN help needed

[Antonio Galiana]

Hello Group.
I Need some advice please:

Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
As hardware I have a Microham MK2R+ and FT1000D
MK2R+ is conneceted via USB.

If I run MMTTY as an standalone program all works fine, in the FT1000D I use
RTTY/LSB and I can work RTTY perfectly.

Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to send
RTTY the transceiver goes into TX but just a continuous carrier. Nothing
else. (RTTY/LSB selected)
If I choose PKT/LSB I can both RX  TX without problem but then when real
time logging, PACK mode appears in DX4 logging window.

One thing that it could be important (??) is that when DX4WIN is running and
I go to the RTTY Control panel window  SETUP (O), in the MMTTY MISC
tab, into the TX-PORT box, only Sound is marked, others are greyed out.
But running MMTTY as standalone, the TX-PORT Box shows COM-TxD(FSK) and USB
port Limited Speed.

Any idea?  This issue is driving me crazy...


-- 
*73 de Tony*
*EA5BY
Skype: ea5by.tony

*
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY DX4WIN help needed

[Antonio Galiana]

Hi Jim.
Yes, that was the first thing I did. Thanks.
But keying is PTT Control/RTS. That's the only way I can make it TX, but
unfortunatily just continuous carrier.

Any other idea?

Thanks in advance for helping.
73 Tony


2011/4/22 Jim Reisert AD1C jjreis...@alum.mit.edu

 Did you see this?

 http://dx4win.ad1c.us/appnotes/mmtty.htm

 On Fri, Apr 22, 2011 at 5:39 AM, Antonio Galiana ea5by.t...@gmail.com
 wrote:
  Hello Group.
  I Need some advice please:
 
  Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
  As hardware I have a Microham MK2R+ and FT1000D
  MK2R+ is conneceted via USB.
 
  If I run MMTTY as an standalone program all works fine, in the FT1000D I
 use
  RTTY/LSB and I can work RTTY perfectly.
 
  Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to
 send
  RTTY the transceiver goes into TX but just a continuous carrier. Nothing
  else. (RTTY/LSB selected)
  If I choose PKT/LSB I can both RX  TX without problem but then when real
  time logging, PACK mode appears in DX4 logging window.
 
  One thing that it could be important (??) is that when DX4WIN is running
 and
  I go to the RTTY Control panel window  SETUP (O), in the MMTTY MISC
  tab, into the TX-PORT box, only Sound is marked, others are greyed out.
  But running MMTTY as standalone, the TX-PORT Box shows COM-TxD(FSK) and
 USB
  port Limited Speed.
 
  Any idea?  This issue is driving me crazy...
 
 
  --
  *73 de Tony*
  *EA5BY
  Skype: ea5by.tony
 
  *
  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
 



 --
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us




-- 
*73 de Tony*
*EA5BY
Skype: ea5by.tony

*
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY DX4WIN help needed

[Dick Flanagan]

The MMTTY reflector http://groups.yahoo.com/group/MMTTY/ contains a 
wealth of information and is full of very helpful people.  If you 
can't find a solution here, that would be a highly-recommended source of help.

Dick

At 04:39 AM 4/22/2011, Antonio Galiana wrote:
 Hello Group.
 I Need some advice please:
 
 Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
 As hardware I have a Microham MK2R+ and FT1000D
 MK2R+ is conneceted via USB.
 
 If I run MMTTY as an standalone program all works fine, in the FT1000D I use
 RTTY/LSB and I can work RTTY perfectly.
 
 Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to send
 RTTY the transceiver goes into TX but just a continuous carrier. Nothing
 else. (RTTY/LSB selected)
 If I choose PKT/LSB I can both RX  TX without problem but then when real
 time logging, PACK mode appears in DX4 logging window.
 
 One thing that it could be important (??) is that when DX4WIN is running and
 I go to the RTTY Control panel window  SETUP (O), in the MMTTY MISC
 tab, into the TX-PORT box, only Sound is marked, others are greyed out.
 But running MMTTY as standalone, the TX-PORT Box shows COM-TxD(FSK) and USB
 port Limited Speed.
 
 Any idea?  This issue is driving me crazy...
 
 
 --
 *73 de Tony*
 *EA5BY
 Skype: ea5by.tony
 
 *
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
--
Dick Flanagan K7VC
d...@k7vc.com

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY DX4WIN help needed

[Kostas Stamatis]

Hello
I agree with Guy that you probably have 2 settings.
I have exactly the same setup and plays ok.
See also the setup guide for dx4win and mk2r+ i have made in cooperation 
with w4tv.
http://users.otenet.gr/~sv1dpi/download/mk2r.pdf
Microhma offers this also in help files of the router.
Happey Easter to all.
73 Kostas sv1dpi
PS feel free to ask me more questions if you need abt the setup.

- Original Message - 
From: Antonio Galiana ea5by.t...@gmail.com
To: Dx4win@mailman.qth.net
Sent: Friday, April 22, 2011 2:39 PM
Subject: [Dx4win] MMTTY  DX4WIN help needed


 Hello Group.
 I Need some advice please:

 Here I have instaled DX4WIN 8.05 into a new computer running Windows XP.
 As hardware I have a Microham MK2R+ and FT1000D
 MK2R+ is conneceted via USB.

 If I run MMTTY as an standalone program all works fine, in the FT1000D I 
 use
 RTTY/LSB and I can work RTTY perfectly.

 Through DX4WIN all goes fine except RTTY. RX is ok, but when I want to 
 send
 RTTY the transceiver goes into TX but just a continuous carrier. Nothing
 else. (RTTY/LSB selected)
 If I choose PKT/LSB I can both RX  TX without problem but then when real
 time logging, PACK mode appears in DX4 logging window.

 One thing that it could be important (??) is that when DX4WIN is running 
 and
 I go to the RTTY Control panel window  SETUP (O), in the MMTTY MISC
 tab, into the TX-PORT box, only Sound is marked, others are greyed out.
 But running MMTTY as standalone, the TX-PORT Box shows COM-TxD(FSK) and 
 USB
 port Limited Speed.

 Any idea?  This issue is driving me crazy...


 -- 
 *73 de Tony*
 *EA5BY
 Skype: ea5by.tony

 *
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY Control panel Window

[W9RPM]

Is there anyway to keep this window up so I can use it for tuning in a 
station, instead of disappearing? Thanks, John

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
CLUB INFO: http://www.mvara.net/
DX and CONTEST CLUB: http://www.w9idx.com/
For Frequent VHF/UHF Updates:  www.kc9bqa.com
WI VHF/UHF County Hunters Award:  www.wivuch.com
AOL IM: W9RPM
YAHOO: W9RPM


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Control panel Window

[Dick Flanagan]

At 12:52 PM 2/9/2011, W9RPM wrote:
 Is there anyway to keep this window up so I can use it for tuning in a
 station, instead of disappearing? Thanks, John

I position all of my windows so the MMTY tuning indicator stays 
visible behind the D4W windows.

Dick
--
Dick Flanagan K7VC
d...@k7vc.com

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY with SignaLink

[W9RPM]

Anyone out there using MMTTY within DX4WIN with their 5000? Trying to 
get it set up so that I can key the radio in the MMTTY window in DX4WIN 
without toggling the TX and TXOFF in the RTTY control panel for MMTTY. 
Hope I am not confusing anyone to much. Having some health issues that 
the treatment is messing with my memory and concentration. Thanks, John 
W9RPM

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
CLUB INFO: http://www.mvara.net/
DX and CONTEST CLUB: http://www.w9idx.com/
For Frequent VHF/UHF Updates:  www.kc9bqa.com
WI VHF/UHF County Hunters Award:  www.wivuch.com
AOL IM: W9RPM
YAHOO: W9RPM


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY control panel

[W4PV]

Hello,

Why is it that the RTTY control panel in DX4WIN will not stay on top of the 
typing window.  The control panel puts itself down when I tune my transceiver 
from one freq. to another or type in the typing window. The only way I can get 
the control panel back on the desk top is to click on the RTTY control panel in 
the task bar.

Thanks,

Patrick, W4PV
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY Problem

[Dave Earnest]

When I try to transmit with MMTTY in DX4WIN, my rig goes to transmit, but I get 
the error message:
 
An exception occured -
i.e. _Open - device already open
 
I am not running MMTTY stand alone or any other program but DX4WIN.
 
When I close DX4WIN and bring up MMTTY stand alone, MMTTY works fine.
 
Any thoughts?
 
73,
Dave, K7JJ


Dave Earnest

k...@arrl.net

  
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY

[David J. Strout]

My problem is that MMTTY works fine in WriteLog and always did in DX4WIN too.  
Now it works in WriteLog but neither MMTTY standalone or MMTTY in WriteLog will 
work. Have
studied Jim's App. Note 9 and prior screen shots I took to no avail.  
Suggestions appreciated.
Dave, W2YC
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Function Key Messages

[Jim Reisert AD1C]

I've added Larry's comments to the bottom of this web page:

http://dx4win.ad1c.us/appnotes/mmtty.htm

Thanks for the insight!

73 - Jim AD1C

 At 02:32 AM 9/20/2010, Larry Gauthier \(K8UT\) wrote:

The macro definitions for CW, PSK31, and RTTY modes are all contained within
your save\DX4WIN.CFG file, which cannot be edited off-line. {well, not
unless someone has written an editor to read/write the CFG file}

However, there is a work-around for editable macros. Aside from the short,
non-changing macros like MyCall, ReplyCQ and EndQSO (which I never
change), I created a subdirectory named dx4w804\macros, and within that
subdirectory I placed text files with long or often-edited macros - names
like FL_CW_bragsheet.txt and FK_RTTY_intro.txt and FK_PSK_callcq.txt. Then,
in the CFG macro definitions, I call those text files with the corresponding
macro string: i.e. Intro|%f..\macros\FK_RTTY_Intro%

It's a bit of a kludge, but has worked for me for many years. I suppose if
you really wanted to, you could divert EVERY function key as FK_RTTY_F1.txt
and FK_RTTY_F2.txt... and direct every macro to an external file.

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY with 5000

[W9RPM]

  Hi, I am going to be using MMTTY in DX4WIN with the 5000. Has anybody 
checked into the commands to be able to have the 5000 go to LSB when 
clicking on a RTTY spot in DX4WIN instead of RTTY? Thanks- John

-- 
EMAIL: j...@w9rpm.com
WEBPAGE: http://www.w9rpm.com/
CLUB INFO: http://www.mvara.net/
DX and CONTEST CLUB: http://www.w9idx.com/
For Frequent VHF/UHF Updates:  www.kc9bqa.com
WI VHF/UHF County Hunters Award:  www.wivuch.com
AOL IM: W9RPM
YAHOO: W9RPM


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Function Key Messages

[Dick Flanagan]

Thanks for the explanation, Larry.  It seems funny they would be in 
both the .INI and .CFG files, but your kludgy solution is actually 
pretty usable and will take care of my needs.

Thanks, again

Dick

At 02:32 AM 9/20/2010, Larry Gauthier \(K8UT\) wrote:
 Dick,
 
 The macro definitions for CW, PSK31, and RTTY modes are all contained within
 your save\DX4WIN.CFG file, which cannot be edited off-line. {well, not
 unless someone has written an editor to read/write the CFG file}
 
 However, there is a work-around for editable macros. Aside from the short,
 non-changing macros like MyCall, ReplyCQ and EndQSO (which I never
 change), I created a subdirectory named dx4w804\macros, and within that
 subdirectory I placed text files with long or often-edited macros - names
 like FL_CW_bragsheet.txt and FK_RTTY_intro.txt and FK_PSK_callcq.txt. Then,
 in the CFG macro definitions, I call those text files with the corresponding
 macro string: i.e. Intro|%f..\macros\FK_RTTY_Intro%
 
 It's a bit of a kludge, but has worked for me for many years. I suppose if
 you really wanted to, you could divert EVERY function key as FK_RTTY_F1.txt
 and FK_RTTY_F2.txt... and direct every macro to an external file.
 
 -larry
 K8UT
 
 --
 From: Dick Flanagan d...@k7vc.com
 Sent: Sunday, September 19, 2010 8:55 PM
 To: DX4WIN Reflector dx4win@mailman.qth.net
 Subject: [Dx4win] MMTTY Function Key Messages
 
  I have been using MMTTY with D4W and have made several changes to the
  MMTTY function keys.  The changes all take and appear to be
  fine.  What I would like to do is find the file where these function
  keys are mapped so I can edit them off-line.  I have looked at the
  D4W.ini file, but all I see are the original MMTTY key mappings, not
  the ones I changed them to.
 
  Can someone tell me where these mappings are so I can edit them off-line?
 
  Thanks.
 
  Dick
  --
  Dick Flanagan K7VC
  d...@k7vc.com
 
  __
  Dx4win mailing list
  Home: http://mailman.qth.net/mailman/listinfo/dx4win
  Help: http://mailman.qth.net/mmfaq.htm
  Post: mailto:Dx4win@mailman.qth.net
 
  This list hosted by: http://www.qsl.net
  Please help support this email list: http://www.qsl.net/donate.html
 
 
 
 
 
 
--
Dick Flanagan K7VC
d...@k7vc.com
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY Function Key Messages

[Dick Flanagan]

I have been using MMTTY with D4W and have made several changes to the 
MMTTY function keys.  The changes all take and appear to be 
fine.  What I would like to do is find the file where these function 
keys are mapped so I can edit them off-line.  I have looked at the 
D4W.ini file, but all I see are the original MMTTY key mappings, not 
the ones I changed them to.

Can someone tell me where these mappings are so I can edit them off-line?

Thanks.

Dick
--
Dick Flanagan K7VC
d...@k7vc.com

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY question

[Mike]

  Does anyone know if DX4Win talks to mmtty through the xmmt.ocx or not?

Thanks, Mike NF4L.
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY and FTDX5000MP

[Jim Reisert AD1C]

On Tue, Jun 8, 2010 at 7:27 AM, W4PV w...@comcast.net wrote:

 What settings does the group us on their MMTY program to decode RTTY.

Settings?  It depends on your AFSK/FSK hardware.  Better if you ask
r...@contesting.com

 Also the setup with DX4WIN.

Have you seen this yet?

http://dx4win.ad1c.us/appnotes/mmtty.htm

As the note says, get MMTTY working BY ITSELF first (without DX4WIN)
before trying to use it within DX4WIN.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] MMTTY and FTDX5000MP

[W4PV]

What settings does the group us on their MMTY program to decode RTTY. Also the 
setup with DX4WIN.

Thanks,

Patrick, 'W4PV
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY Memory File Name

[Kjell W. Strom]

Doug,

The function key messages remain the same from your previous
version. You can edit them with Alt-E when your are in the PSK
respectively MTTY window. Alt-H and search for function keys to
get help.

73, 
Kjell, PB3SM - SM6CPI
 

 -Original Message-
 From: dx4win-boun...@mailman.qth.net 
 [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Doug
Joyce
 Sent: 28 December 2009 19:50
 To: DX4Win
 Subject: [Dx4win] MMTTY Memory File Name
 
 Good Afternoon:
 
 The PSK31 and MMTTY memory function keys have been 
 prepopulated by Paul and both appear to have the same message 
 contents.
 
 Can someone confirm that the same set of memory contents for 
 F1 to F8 and CTRL F1 to F8 are used for both MMTTY as well as
PSK31
 
 I've checked Appendix B - Files in the Help file but can't 
 find a reference to file name for where the contents of these 
 memory function keys are located.
 
 I've been moving some files around while setting up a new 
 shack PC and seem to have reverted back to the default 
 contents.  Where do I look to find the contents after the 
 memories have been changed?
 
 Thanks and best of Seasons Greetings
 
 Doug   VE3MV
 
 
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list:
http://www.qsl.net/donate.html

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] MMTTY w/704 705

[Mike Rhodes]

I know it seems terribly obvious but have you rebooted lately? You might 
even have to go as far as physically dropping power to your PC.


Good Luck,
Mike / W8DN



DAVID DERAIN wrote:
I am having a MMTTY problem with v704  v705.  I have had to go back 
to v702 where everything works fine.  I have also tried this on my 
back-up computer with the same results.
 
PROBLEM: When using the RTTY macros I get an ie Open - device already 
open error.
 
I am running RTTY FSK using COM 1 (A real COM Port, no USB to COM 
converter)

Has anyone else seen this problem.



___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
  

___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] MMTTY w/704 705

[DAVID DERAIN]

After 3 days of pulling my hair out I have solved the problem.
  
The problem was in the MMTTY keying setup window  (ALT S in the MMTTY window).  
With MMTTY using COM 1 for FSK the MMTTY keying setup cannot be set to COM 1 
also.  When running in the FSK mode the keying setup is irrelevant and should 
not matter, but it does. 
How the keying got set to COM 1 for v704  705 only I do not know.
 
Thanks to those who had suggestions.  

--- On Fri, 10/17/08, Mike Rhodes [EMAIL PROTECTED] wrote:

From: Mike Rhodes [EMAIL PROTECTED]
Subject: Re: [Dx4win] MMTTY w/704  705
To: dx4win@mailman.qth.net
Date: Friday, October 17, 2008, 6:08 AM

I know it seems terribly obvious but have you rebooted lately? You might 
even have to go as far as physically dropping power to your PC.

Good Luck,
Mike / W8DN



DAVID DERAIN wrote:
 I am having a MMTTY problem with v704  v705.  I have had to go back 
 to v702 where everything works fine.  I have also tried this on my 
 back-up computer with the same results.
  
 PROBLEM: When using the RTTY macros I get an ie Open - device
already 
 open error.
  
 I am running RTTY FSK using COM 1 (A real COM Port, no USB to COM 
 converter)
 Has anyone else seen this problem.

 

 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win
   
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] MMTTY w/704 705

[DAVID DERAIN]

I am having a MMTTY problem with v704  v705.  I have had to go back to v702 
where everything works fine.  I have also tried this on my back-up computer 
with the same results.
 
PROBLEM: When using the RTTY macros I get an ie Open - device already open 
error.
 
I am running RTTY FSK using COM 1 (A real COM Port, no USB to COM converter)
Has anyone else seen this problem.___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] MMTTY Function Keys

[Jim Reisert AD1C]

On 9/28/2008 4:38 AM, Ron Stone wrote:

My MMTTY window in DX4Win shows only 8 function keys at the bottom of 
the screen. How can I add additional function keys to the window?


I think that's hard-coded and something that can't be changed.  You can 
use the full MMTTY program outside of DX4WIN if you need more function keys.


73 - Jim AD1C

--
Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] MMTTY Function Keys

[Ron Stone]

My MMTTY window in DX4Win shows only 8 function keys at the bottom of the 
screen. How can I add additional function keys to the window?

Thanks___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] MMTTY in DX4WIN

[Jim Reisert AD1C]

On 3/9/2008 8:06 PM, Glenn Edson wrote:

 When we bring up DX4WIN and open the MMTTY window inside it, it does not 
 have the 16 macro boxes showing in the RTTY control panel display. These 
 16 macro boxes are part of the control panel display when you use MMTTY 
 as a stand-alone program. Is there some reason for this or is there some 
 way to get these in the display when operating rtty within DX4WIN?

What you see is all there is.  DX4WIN interfaces to a reduced 
functional MMTTY window.  Writelog is the same way.

You always have the option of running the stand-alone version of MMTTY 
and log the QSO by hand.

73 - Jim AD1C

-- 
Jim Reisert AD1C/?, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Mon Mar 10 11:23:39 2008
From: [EMAIL PROTECTED] (GEO Badger)
Date: Mon Mar 10 11:28:41 2008
Subject: [Dx4win] cw decoder
Message-ID: [EMAIL PROTECTED]

Are there plans afoot to put a CW decoder in dx4win as
there is in N1MM and Writelog?

Would be nice.

Ciao baby, catch you on the flip side.


  

Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

[Dx4win] MMTTY

[Gerald Ewell, Sr.]

Can anyone tell me why MMTTY does not release my transmitter until 15 or more 
seconds after the end of my message?  I've explored all settings to eliminate a 
VOX problem and found none.

Any help will be appreciated.

Gerald Ewell N4GE

[Dx4win] MMTTY

[F6EXV]

Hi all
I am still trying to configure MMTTY to work with DX4Win... and 
struggling...
Everythings works fine separately, but cannot get them to work together...
When I call up the MMTTY on DX4Win, I get a reduced sceen, with only 2 
boxes the receive and the transmit boxes.
How do I get the full normal screen of MMTTY, with the scopes, preset 
buttons, etc... ?
Using DX4Win version 7.01 here
Thanks + 73
Paul F6EXV

[Dx4win] MMTTY

[Tom Carrubba KA2D]

Paul

You must resize the MMTY windows to your preference. Makes for a very busy 
screen.

My preference to use MMTY as stand alone and cut/paste the worked station 
callsign into DX4WIN for final logging.

Tom KA2D

- Original Message - 
From: F6EXV [EMAIL PROTECTED]
To: DX4WIN Reflector dx4win@mailman.qth.net
Sent: Wednesday, October 24, 2007 11:38 AM
Subject: [Dx4win] MMTTY


 Hi all
 I am still trying to configure MMTTY to work with DX4Win... and 
 struggling...
 Everythings works fine separately, but cannot get them to work together...
 When I call up the MMTTY on DX4Win, I get a reduced sceen, with only 2 
 boxes the receive and the transmit boxes.
 How do I get the full normal screen of MMTTY, with the scopes, preset 
 buttons, etc... ?
 Using DX4Win version 7.01 here
 Thanks + 73
 Paul F6EXV


 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win
 

[Dx4win] mmtty @ psk31 window macros

[Dave (g0vxe)]

Hi 
is there any way of getting more macros for these modes
All The Best
g0vxe
Dave
From [EMAIL PROTECTED]  Tue Oct  9 17:37:33 2007
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Tue Oct  9 17:42:44 2007
Subject: [Dx4win] mmtty @ psk31 window macros
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

--- Dave (g0vxe) [EMAIL PROTECTED] wrote:

 is there any way of getting more macros for these modes

I think the short answer is yes.  It's in the archives somewhere, or maybe the
fellow who did it will post here.

- Jim


--
Jim Reisert AD1C/0, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Sun Oct 14 10:47:45 2007
From: [EMAIL PROTECTED] (n4dsp)
Date: Sun Oct 14 10:53:35 2007
Subject: [Dx4win] Changing Submission
Message-ID: [EMAIL PROTECTED]

Not sure how it happened but all my confirmations were changed to S, 
(submission). How do I change them back to confirmed?

john 

[Dx4win] MMTTY...again

[Jim Reisert AD1C]

Check everything this app. note says:

http://dx4win.ad1c.us/appnotes/mmtty.htm

73 - Jim AD1C


--- John Holmes [EMAIL PROTECTED] wrote:

 Hello All.
 I'm sure this has been covered in the past, but here goes again.
 I am trying to get MMTTY to operate correctly with DX4WIN, but have a
 problem. MMTTY works fine standalone or with N1MMLogger, but when I try
 using it in DX4WIN, it will key the rig, but not produce any diddles. It
 produces diddles fine with the other programs. I'm using a simple interface
 (two 2n3904's) between my COM2 port for both CW and RTTY and, as I said, it
 works great except for the solid carrier from DX4WIN.
 I'd appreciate any help.
 Thanks and 73,
 
 John W9ILY
 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win
 


--
Jim Reisert AD1C/0, [EMAIL PROTECTED], http://www.ad1c.us
From [EMAIL PROTECTED]  Thu Sep 27 18:34:12 2007
From: [EMAIL PROTECTED] (Dave Sharred)
Date: Thu Sep 27 18:38:16 2007
Subject: [Dx4win] Another V7 issue maybe !
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

Thanks again Jim; I checked all the award boxes, but it is station !!

-Original Message-
From: Jim Reisert AD1C [mailto:[EMAIL PROTECTED]
Sent: 27 September 2007 20:49
To: Dave Sharred; REFLECTOR dx4win
Subject: Re: [Dx4win] Another V7 issue maybe !


--- Dave Sharred [EMAIL PROTECTED] wrote:


 After yesterday's false alarm, I have seen something strange on my 2 pc's.

 In my log, I always show the IOTA window and the County window.

 For all normal windows - DXCC, WAS; I am able to limit the bands shown to
 those I use through preferences.

 The IOTA and County window show all HF bands; and 33!!   33 what I am not
 sure !!!  It's not even listed in the vhf/uhf bands !

This is a INI preferences merge issue.  Paul added an extra band somewhere
along the way, and this results in one of the other bands being enabled in
your preferences, even though the prefs. you imported have it disabled.

Go to your Station preferences, it will be obvious which check box you need
to
uncheck.

73 - Jim AD1C


--
Jim Reisert AD1C/0, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] MMTTY

[Rien]

Hello to all

Is there some one who work with MTTY and DX4Win ?

I try but it will not work here

I using a FT-2000 and a rigblaster 

Hope there is some one have the same configuration and work with this 

 

Tnx 73 Rien, PA7RA 

 

 

[Dx4win] MMTTY

[Steve GW4BLE]

As mentioned previously though, SPLIT operation on RTTY (MMTTY) doesn?t work
properly; if you call someone on the 2nd VFO the received signal on the main
VFO is then reversed.? I suppose it depends how much split frequency
operation you do on MMTTY, but it was annoying to find this happen when
calling the guys at 3B7.

There ?*could* be some other anomalies too.

[Dx4win] MMTTY

[Steve GW4BLE]

Can't really help with specific reply for Bob, but whilst on topic of MMTTY
does anyone know how to keep the RTTY Control panel on screen - not have it
hiding behind other windows - when using DX4WIN?

73
 
Steve
GW4BLE
 

[Dx4win] MMTTY

[Paul Herson]

I use my rig control serial cable to key the rig for CW with DX4WIN.  Can I use 
this same setup to key the rig for MMTTY?

Tnx
Tex


 

It's here! Your new message!  
Get new email alerts with the free Yahoo! Toolbar.
http://tools.search.yahoo.com/toolbar/features/mail/
From [EMAIL PROTECTED]  Mon Apr  2 15:26:48 2007
From: [EMAIL PROTECTED] (Tonno Vahk)
Date: Mon Apr  2 15:31:26 2007
Subject: [Dx4win] how to connect to cluster from packet window?
In-Reply-To: [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]@mail.ee

hi,

I am trying to make it comfortable to connect to cluster over TCP/IO after
starting DX4WIN. I can go to Paclet Window, then open Internet Connection
from right-click menu, then scroll to desired node and slect it and click
OK.

Is it possible to memorize/automate this so that DX4WIN qould connect
automatically after starting?

How should I use the CONNECT function key? What is the syntax to be able to
connect by pushing it? It says now Connect|C N3CC%M and it is not
connecting anywhere but error message is displayed.

73
Tonno
ES5TV

[Dx4win] MMTTY

[Larry Gauthier (K8UT)]

Josep,

The answer to you question is both Yes and No.

No = the only way to get full cascaded functionality (where double-clicking 
on a callsign in the MMTTY receive add a new QSO in real-time mode and enter 
the callsign into the record) is by using the MMTTY back-end engine without 
full program controls.

Yes = you can get partial functionality (such as having the DX4WIN keyboard 
macros) by connecting the full MMTTY program to DX4WIN using a null modem 
cable or null modem software (DX4WIN is then talking to MMTTY as a TNC). 
This requires a more powerful computer than the back-end engine.

Depending on your requirements, you may prefer using the partial 
functionality instead of the full functionality. I  wrote an application 
note in 2004 connecting MMTTY to DX4WIN using a null modem technique, 
another note on using DX4WIN macros into MMTTY. You can find them on WA9ALS 
web site at:
http://www.qsl.net/wa9als/dx4win-mmtty-hardware%20v4.pdf

-larry
K8UT
- Original Message - 
From: Josep [EMAIL PROTECTED]
To: dx4win@mailman.qth.net
Sent: Friday, March 09, 2007 05:28
Subject: [Dx4win] MMTTY


Is there the possibility to leave on the MMTTY window with controls and 
cascade together with DX4WIN window...?
Thanks,

Josep
EA6BF
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win 

[Dx4win] MMTTY

[ON4AOI]

Ernie,

Make sure MMTTY is working standalone
then
Go into Preferences | RTTY tab

Type = NONE

Last line 
MMTTY executable
C:\.   fill in where mmtty.exe is located

That should work now
After saving etc

Guy ON4AOI

-Oorspronkelijk bericht-
Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
Namens Ernie Walls
Verzonden: Monday, February 12, 2007 5:15 AM
Aan: dx4win@mailman.qth.net
Onderwerp: [Dx4win] MMTTY

I am one of those hams who has never tried to get MMTTY working with
DX4Win - until today. I use MixW for digital operations.

 

But I thought I would try to get MMTTY going, so as to make a comparison
of the relative merits of both. (I actually got PSK31 going quite OK).

 

At this stage, I can 'open' MMTTY, and get the terminal window in place,
and staying in place, and I can transmit a signal.

 

However, each time I open MMTTY (Window/MMTTY), whilst the terminal
window is OK, the parameters window (Control Panel) continually
minimises - as soon as MMTTY is opened. 

 

So, I click on the program in the Task Bar, it 'maximises' the control
panel window; but then every time I click within the terminal window, it
minimises again. I simply cannot get it to stay 'maximised'.

 

Can someone please guide me to what, no doubt, is an easy solution to a
(probable) silly mistake on my part.

 

Thanks.

Ernie 
Ernie Walls VK3FM 
[EMAIL PROTECTED] 
[EMAIL PROTECTED]


 

___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] MMTTY

[Ernie Walls]

I am one of those hams who has never tried to get MMTTY working with
DX4Win - until today. I use MixW for digital operations.

 

But I thought I would try to get MMTTY going, so as to make a comparison
of the relative merits of both. (I actually got PSK31 going quite OK).

 

At this stage, I can 'open' MMTTY, and get the terminal window in place,
and staying in place, and I can transmit a signal.

 

However, each time I open MMTTY (Window/MMTTY), whilst the terminal
window is OK, the parameters window (Control Panel) continually
minimises - as soon as MMTTY is opened. 

 

So, I click on the program in the Task Bar, it 'maximises' the control
panel window; but then every time I click within the terminal window, it
minimises again. I simply cannot get it to stay 'maximised'.

 

Can someone please guide me to what, no doubt, is an easy solution to a
(probable) silly mistake on my part.

 

Thanks.

Ernie 
Ernie Walls VK3FM 
[EMAIL PROTECTED] 
[EMAIL PROTECTED]


 

[Dx4win] MMTTY

[[EMAIL PROTECTED]]

I have downloaded the MMTTY program v1.65D. Can I start it from DX4WIN..?
Or, are they separate programs...? When I run it from DX4WIN I get two
empty windows there. Which kind of interface do I need to make it
running..? I have a G4ZLP interface, with serial port, will work with
MMTTY/DX4WIN..? Sorry so many questions, but I did some RTTY years ago and
was not with DX4WIN. Thank´s your help.

Josep
EA6BF

[Dx4win] MMTTY-IC756P2-XP PRO

[Chris Sauvageot]

Do it step by step and start with COM1 and TRX only. If this runs do the next 
step.
PRO2 or PRO3 is equal - important is the ICOM number. PRO had 5C; IC7800 6A; 
PRO2 64 and PRO3 6E.
But if you using PRO2 at DX4WIN you have to use in TRX also the PRO2 code = 64 
( you can select these in TRX menu )
Or you switch it in DX4WIN TRX menu to 6E. Then no changes in TRX.

73 Chris DL5NAM

htt://logsearch.de

 -Urspr?ngliche Nachricht-
 Von: N0KK, Kirk [EMAIL PROTECTED]
 Gesendet: 14.10.06 15:04:09
 An: dx4win@mailman.qth.net
 Betreff: [Dx4win] MMTTY-IC756P2-XP PRO


 Im real new to this RTTY thing, have MMTTY working as stand alone =
 program, and interfaced with Writelog.
 
 As for DX4Win, Im to the point where it opens and copies...
 
 But to get it to TX I have to manually switch my IC-756P2 into TX.
 
 
 My Setting are:
 
 DX4Win 7.02.15
 
 RTTY-Com 1
 Rig- Com 4
 Packet- Com 5
 Windows XP PRO, Pentium 4 2.66ghz=20
 
 
 Any Ideas as to what Im missing?
 
 Kirk, N0KK
 
 
 
 --- http://USFamily.Net/dialup.html - $8.25/mo! -- 
 http://www.usfamily.net/dsl.html - $19.99/mo! ---
 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net
 http://mailman.qth.net/mailman/listinfo/dx4win


__
Erweitern Sie FreeMail zu einem noch leistungsst?rkeren E-Mail-Postfach!

Mehr Infos unter http://freemail.web.de/home/landingpad/?mc=021131

[Dx4win] MMTTY

[ANDREW HEWITT]

GA all,
   
  This was a subject discussed recently but I did not see the result, however 
as it is now affecting me I would appreciate enlightenment.
   
  I normally use MixW for Digimodes but as I'm operating /XE1 using my laptop 
and IC706mkiig I have been trying to use MMTTY from within DX4Win so that the 
logging is common. I have set up MMTTY as a stand alone but then I have to 
transfer the logs. Why do that when I have a solution already? 
   
  However I have a problem that MMTTY opens ok but after a couple of minutes or 
less the MMTTY control panel disappears behind the other DX4Win windows. I can 
bring it back by clicking on it but once i have not used it fo a very short 
period it again disappears taking the spectrum display with it. The TX and RX 
text windows remain in place. I am using ver 7.02.14. I don't think that 
earlier versions had this problem.
   
  Anyone know what to do??
  73
  Andy XE1/G3SVD ( for a week or so)
   
From [EMAIL PROTECTED]  Mon Oct  2 07:07:47 2006
From: [EMAIL PROTECTED] (Erkki Heikkinen)
Date: Mon Oct  2 07:11:56 2006
Subject: [Dx4win] MMTTY
In-Reply-To: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

Rick,

MTTY takes care of opening the COM port, so in DW4Win preferencies/RTTY
you should choose RTTY Interface Type none. Hope this helps.

73 Erkki OH2BF


 -Original Message-
 From: 
 [EMAIL PROTECTED] 
 [mailto:[EMAIL PROTECTED]
 net] On Behalf Of Richard -WA6ES
 Sent: 1. lokakuuta 2006 4:58
 To: dx4win@mailman.qth.net
 Subject: [Dx4win] MMTTY
 
 
 Please excuse me if this has been asked before but, I
 have a problem.
 When I activate the MMTTY window no problem until I
 transmit. I get a
 device already open error. When I use the MMTTY
 program no problem,
 Only when accessing it thru DX4WIN. I tried looking
 thru the arcives
 on the other site but it takes a long time. Any
 help would be
 appreciated
 Using 7.02 and had the same problem with 7.01
 
 Thanks
 Rick WA6ES
 
 __
 Do You Yahoo!?
 Tired of spam?  Yahoo! Mail has the best spam protection around 
 http://mail.yahoo.com 
 ___
 Dx4win mailing list
 Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
 

[Dx4win] MMTTY

[Bill Salyers]

Any tricks to getting the MMTTY window working in conjunction with a standard 
sound card? I have PSK31 running just fine. I am getting an error from DX4WIN 
when I try to use MMTTY.
 
Thanks in advance for any direction
 
AJ8B = BillCoach SalsWin the Tip Honorary Memberwww.winthetip.orgWinning Hoops 
Advisory Board Memberwww.winninghoops.com
From [EMAIL PROTECTED]  Mon Jul 17 09:18:44 2006
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Mon Jul 17 09:29:04 2006
Subject: [Dx4win] MMTTY
In-Reply-To: [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

At 08:37 AM 7/17/2006, Bill Salyers wrote:

Any tricks to getting the MMTTY window working in conjunction with a 
standard sound card? I have PSK31 running just fine. I am getting an 
error from DX4WIN when I try to use MMTTY.

What does the error say?

If you have the full version of MMTTY running stand-alone, the rest is easy:

In the RTTY window, set the RTTY Interface type to NONE.

Put the full path to MMTTY.EXE in the Executable box

Then as Aerosmith would say, Just Press Play

73 - Jim AD1C


-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] MMTTY Sound Card

[EA5FID]

Hi !

When It activate rig in men? Radio / Star Radio MMTTY doesn?t star,
because I turn off connection between rig, no problem.

My rig is 1000MP and I use COM1.

Do you help me?

Regards,
?
Juan Del Olmo, EA5FID
Secretary of Lynx DX Group
[EMAIL PROTECTED]

[Dx4win] MMTTY Sound Card

[Jeff Le Fouler]

dont use same come port for rig and MMTTY PTT
you need 2 different com port i you want botth in same time

Jeff

- Original Message - 
From: EA5FID [EMAIL PROTECTED]
To: 'DX4Win Reflector' dx4win@mailman.qth.net
Sent: Sunday, June 18, 2006 9:28 AM
Subject: [Dx4win] MMTTY  Sound Card


Hi !

When It activate rig in men? Radio / Star Radio MMTTY doesn't star,
because I turn off connection between rig, no problem.

My rig is 1000MP and I use COM1.

Do you help me?

Regards,

Juan Del Olmo, EA5FID
Secretary of Lynx DX Group
[EMAIL PROTECTED]


___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

RV: [Dx4win] MMTTY Sound Card

[EA5FID]

What does it connect? PSE.
1000MP has a CAT only.
Tks.
Juan.


-Mensaje original-
De: Jeff Le Fouler [mailto:[EMAIL PROTECTED] 
Enviado el: domingo, 18 de junio de 2006 9:52
Para: EA5FID; 'DX4Win Reflector'
Asunto: Re: [Dx4win] MMTTY  Sound Card

dont use same come port for rig and MMTTY PTT
you need 2 different com port i you want botth in same time

Jeff

- Original Message - 
From: EA5FID [EMAIL PROTECTED]
To: 'DX4Win Reflector' dx4win@mailman.qth.net
Sent: Sunday, June 18, 2006 9:28 AM
Subject: [Dx4win] MMTTY  Sound Card


Hi !

When It activate rig in men? Radio / Star Radio MMTTY doesn't star,
because I turn off connection between rig, no problem.

My rig is 1000MP and I use COM1.

Do you help me?

Regards,

Juan Del Olmo, EA5FID
Secretary of Lynx DX Group
[EMAIL PROTECTED]


___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] MMTTY Double Space

[Ted Huf W4ZE]

Does anyone know how to stop the MMTTY window from giving a double space on
a CR/LF?

Ted Huf
W4ZE
724-873-5050
Hickory, PA
www.w4ze.com
[EMAIL PROTECTED]

[Dx4win] MMTTY, FSK and no FSK

[Floyd Sense]

Recently built a new system and had to reinstall all the software. 
Since then, am unable to get MMTTY under DX4WIN to key the FSK line.
MMTTY as stand-alone works just fine and keys proper PTT and FSK lines 
as it has for many years.  MMTTY under DX4WIN keys the PTT line just 
fine, but not the FSK line.  Looking for ideas as to why.  Here's how 
I'm set up: DX4WIN V7, MMTTY 165B.  In DX4WIN setup parameters: CW/PTT 
control- COM4, DTR is CW keying, RTS is PTT Control.  RTTY tab - Type = 
NONE.  In MMTTY setup, Misc Tab, TX port set to COM-TxD(FSK).  In MMTTY 
window, keying setup, PTT Control set to RTS.

MMTTY window is opened from DX4WIN, receive is just fine.  If I hit the 
TX button, RTS line comes up on COM4 for PTT, but no FSK.  As you'd 
expect to see if MMTTY were set up for AFSK.  Again, MMTTY stand-alone 
works perfectly.  Any ideas?

73, Floyd - K8AC
From [EMAIL PROTECTED]  Wed Mar 29 23:27:53 2006
From: [EMAIL PROTECTED] (Jim Reisert AD1C)
Date: Wed Mar 29 23:32:52 2006
Subject: [Dx4win] DX4WIN.CTY Release #28 - last call
Message-ID: [EMAIL PROTECTED]

I have posted updated release notes for DX4WIN.CTY Release #28:

 http://www.ad1c.us/dx4win/history.htm#28

The list of callsign exceptions and QSL manager changes is current as 
of 29 March 2006.

I expect there will be another jump in the number of QSL managers 
when I finish processing the calls from CQ WPX SSB.  There are no 
radical changes to the size of the QSL manager database this 
time.  Remember, only QSL manager *changes* are listed in the release 
notes, it would take up too much space to list all the additions.

The release will be sometime this weekend (April 1/2).

73 - Jim AD1C

-- 
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us

[Dx4win] MMTTY BUFFER ERROR

[[EMAIL PROTECTED]]

MMTTY was working in Dx4Win but now when I hit one of the buffer keys with
either the mouse or F key I get an error message.? 
? Exception Occurred 
? Open ? device already open

It works if I hit Tx button and free type in but not from buffers.

Tnx Shawn, WB1AEL