[Efw-user] network drivers

[Solet]

I have a gigabyte b360n-wifi board with 2 onboard eth cards. it is a mini
itx board in a tiny little case so a pci card is not a feasible option for
fixing this problem. one of the cards is detected on install, the other is
not. i'm looking for any help in adding drivers for the second card (i have
not done anything like this in 15 years back when you had to build your own
wifi drivers in linux. and even then i had apt at my disposal-- i've never
attempted any of this without a repos)

below is relevant lspci output. the card at 01:00.0 is the working card.
the 00:1f.6 is the one that is not coming up

00:1f.6 Ethernet controller: Intel Corporation Device 15bc (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Device e000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
SERR- TAbort-
SERR- ___
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user

Re: [Efw-user] Installation hang

[Solet]

You were 100% right. I had disabled secure boot, but had not set CSM to
Legacy.

Thank you.

On Mon, Feb 4, 2019, 1:34 AM Daniele De Lorenzi  Usually this is caused by UEFI,
> If the motherboard have UEFI enabled, please try to disable it
>
> Daniele
>
> On Mon, Feb 4, 2019 at 7:25 AM Solet  wrote:
>
>> I have attempted installing both 3.3 and 3.2 on a  GIGABYTE B360N WIFI
>> LGA 1151 (300 Series)
>> <https://www.newegg.com/Product/Product.aspx?Item=N82E16813145066>motherboard
>> running an intel celeron g4920. has 4 gig of kingston ram and a kingston
>> ssd-- i know the box is sound because i'm able to install ubuntu (whatever
>> the latest lts was) on it and run that just fine.
>>
>> when i attempt to install efw i get to the grub screen and hit enter. i
>> get a black screen, or a black screen that reads "Booting `boot'" both hang
>> indefinitely. Very occasionally i will get the indefinite hang for a few
>> minutes before a sustained pc beep "scream" that does not stop until i cut
>> power to the box.
>>
>> I am at a total loss. i have confirmed the install media (flash drive)
>> multiple times. i have rebuilt it multiple times various different ways,
>> the most recent being dd if=/path/to/my.iso of=/dev/sdb so i knew i was
>> getting a clean iso transfer.
>>
>>
>> ideas?
>>
>>
>> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=webmail>
>>  Virus-free.
>> www.avg.com
>> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=webmail>
>> <#m_2916444925174333445_m_232746905974265402_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>> ___
>> Efw-user mailing list
>> Efw-user@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/efw-user
>>
>
>
> --
> :: Endian
> :: Securing everyThing
>
> :: Daniele De Lorenzi
> :: Phone +39 0471 631763
> :: Fax +39 0471 631764
> :: http://www.endian.com
> :: d.delore...@endian.com
> ___
> Efw-user mailing list
> Efw-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/efw-user
>
___
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user

[Efw-user] Installation hang

[Solet]

I have attempted installing both 3.3 and 3.2 on a  GIGABYTE B360N WIFI LGA
1151 (300 Series)
motherboard
running an intel celeron g4920. has 4 gig of kingston ram and a kingston
ssd-- i know the box is sound because i'm able to install ubuntu (whatever
the latest lts was) on it and run that just fine.

when i attempt to install efw i get to the grub screen and hit enter. i get
a black screen, or a black screen that reads "Booting `boot'" both hang
indefinitely. Very occasionally i will get the indefinite hang for a few
minutes before a sustained pc beep "scream" that does not stop until i cut
power to the box.

I am at a total loss. i have confirmed the install media (flash drive)
multiple times. i have rebuilt it multiple times various different ways,
the most recent being dd if=/path/to/my.iso of=/dev/sdb so i knew i was
getting a clean iso transfer.


ideas?


Virus-free.
www.avg.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
___
Efw-user mailing list
Efw-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/efw-user