[Elecraft] k3fixtime command line utility for Linux (python)
Here's a quick Linux program in Python, written after reading David's description below and a few minutes consultation with the K3 Programmer's Manual. Follow the installation instructions, and then just type k3fixtime when you want the time fixed. http://wa5znu.org/log/2009/03/python-k3lib-update.html The library provides a few other command-line utilities for the K3, plus a Python programming interface. I'll likely make it work on other operating systems eventually, but if someone else wants to take on the task that'd be great too. Leigh/WA5ZNU David, W4SMT wrote: I've had a few requests for the K3 time updater I mentioned the other day. So I've made it available for download. Mac version (OS X 10.3 or later) http://sight.net/K3Time/K3Time.zip Windows XP/VISTA (maybe 98 not sure) http://sight.net/K3Time/K3TimeWin.zip It's very easy to use and should be self-explanatory. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Your Opinion: The realit..
Talking of birds Julian and qrp I've just returned from the Gambia where I did some 20m cw as C56ETF. The pile-ups were impressive but I still kept my binoculars next to my key to check out that new one in the trees outside the balconynever had to contend with avian qrm before either - some of them are *so* loud both in looks and call! I was pleasantly surprised at the number of qrp stations I worked in the pile-ups. I never seemed to wind the K3's filtering right down in split, preferring instead to use the excellent AFX to pluck out stations calling slightly off the main frequency and that way I could detect the occasional ..QRP.. from the rabble. When the rest of the pile-up finally realised I wasn't going anywhere until I worked the 'QRP' guy I was able to complete. Wasn't aware I missed any qrp that called. The K3 (with a 20m wire dipole) worked really well but the customs at Banjul did try to extract 40% import duty from me for it...! 73, Stewart Rolfe, GW0ETF/C56ETF Julian, G4ILO wrote: I like watching birds, but I don't tick 'em off in a book, and I don't drive hundreds of miles just to spot a rarity. Same with radio. It's nice to work something unusual but if I can't do it with moderate power and antennas I'm not bothered about it. Anyone can work a long distance with high power and a huge antenna. What never stops being amazing is when someone hears you from thousands of miles away and you're using barely enough power to light a torch bulb. Even the guy at the other end whose antenna, receiver and ears make the contact possible, can still appreciate the wonder of that. It'd be nice to be able to run the legal limit into a big beam, but I bet if I could I'd soon get bored with it. -- View this message in context: http://n2.nabble.com/Re%3A-Re--Your-Opinion%3A-The-realit..-tp2430731p2472514.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] EQP Where's the Buzz?
That is the rule, 100W max, so if your're QRO and normally up above 400W or so, then you can't enter a log. However, why not try running barefoot this time and see how you like it. You might find it an interesting challenge. Sorry to anyone you thinks I'm sticking my foot in here 73 de M0XDF, K3 #174 -- For all our conceits about being the center of the universe, we live in a routine planet of a humdrum star stuck away in an obscure corner ... on an unexceptional galaxy which is one of about 100 billion galaxies. ... That is the fundamental fact of the universe we inhabit, and it is very good for us to understand that. -Carl Sagan, astronomer and writer (1934-1996) On 13 Mar 2009, at 05:51, Jan Erik Holm wrote: From the rules: Please limit power to 100W maximum. Since I don´t operate at the 100W power level (or lower) does it mean I can´t take part in it? Just let me know and I will not bother. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] EQP Where's the Buzz?
... and that means it is no use trying to work cross pond on 160. Bye from SM7BIC AR.. That is the rule, 100W max, so if your're QRO and normally up above 400W or so, then you can't enter a log. However, why not try running barefoot this time and see how you like it. You might find it an interesting challenge. Sorry to anyone you thinks I'm sticking my foot in here 73 de M0XDF, K3 #174 -- For all our conceits about being the center of the universe, we live in a routine planet of a humdrum star stuck away in an obscure corner ... on an unexceptional galaxy which is one of about 100 billion galaxies. ... That is the fundamental fact of the universe we inhabit, and it is very good for us to understand that. -Carl Sagan, astronomer and writer (1934-1996) On 13 Mar 2009, at 05:51, Jan Erik Holm wrote: From the rules: Please limit power to 100W maximum. Since I don´t operate at the 100W power level (or lower) does it mean I can´t take part in it? Just let me know and I will not bother. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] EQP Where's the Buzz?
I'd encourage everyone to try to work at a lower power, yes, it puts a bit more emphasis on conditions, and a bit more effort for the prop gods, but when it is all done, holding that qsl card from a Chek, or other Eu country, or Asia, or pretty much anywhere, that states quite simply that the contact was made with under 1 watt from his end, and you know you were using less than 5... makes a lasting impression. One that states proudly, and rightfully so, 250 Milliwatts, is very nice to hold. Two el quad on this end at 40 feet, a 6 el yagi at 60 feet on that end. And it wasn't at the peak of the sunspots either... just the peak of signals of that day. --... ...-- Dale - WC7S in Wy _ Windows Live™ Groups: Create an online spot for your favorite groups to meet. http://windowslive.com/online/groups?ocid=TXT_TAGLM_WL_groups_032009 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] accurate time
Mike Markowski wrote: For situations where time is important, it's worth learning about NTP. It's an open protocol and is run by default on most unix-like OSes. Unlike the Windows NTP client which simply syncs every couple weeks (by default), an ntp daemon is running always on your machine. It doesn't do a simple sync but continually, to use the word loosely, monitors nearby time servers. The linux laptop in my shack is always right on time, plus or minus such a tiny amount that it doesn't matter. The protocol is used worldwide and was initially developed by Prof Dave Mills at Univ of Delaware, my alma mater. As an EE grad student, I used to enjoy attending his presentations on NTP. He's W3HCF and has a link to the W3UD Amateur Radio Club on his professional home page. Jon LA4RT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KREF-EXT Option
Dear Jan, Many thanks for your interesting suggestions re the Analog device. I was asking about the Elecraft option on behalf of a friend in the Netherlands who is thinking of buying a K3 but if there is no word from Elecraft on the subject I will pass your thoughts on to him. I do not know the answer to the question in your last sentence. 73 to all Geoff G3UCK - Original Message - SM6TUW wrote: A syntheiziser built around f.ex ADF 4001( it is also used in the K3 synth) for locking the VCXO Z1 (49.380 MHz) to an external 10MHz is simple in design. For experiment with the ADF4001 it can be programmed via a serial bus connected to your computers parallell port. Analog Devices provides programs and descriptions for this. . Does anybody know the use of the 100Hz P4 pin #1 ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] March PBMME and Appalachian Trail
Hello, Saturday the 14th is the last PBMME for the Polar Bears winter season. Check out www.n3epa.org for a official list of Polar Bears and the PB's that will be out on a trail on Saturday. I will be starting a 7.5 mile hike with Mark de NK8Q. We will setup camp and operate on Saturday afternoon thru Sunday morning. You can find either of us around the usual QRP frequencies. I am still looking for the States of HI and MT to have all 50 States worked from the Appalachian Trail. I am also looking for a QSO with someone that would be on the Appalachian Trail in the State of MA or ME for a AT to AT QSO. March 2009 will be the start of the 10th season for me going out on the Appalachian Trail with my QRP radios. So this will be a great way to kick off the hike and camping over night on the AT. I will probable be on CW most of the time but I will have my K2 with me and a mic for SSB. There will be a lot of Polar Bears with their Elecraft radios out on the trail so look for us in the Elecraft QP this weekend. If you work any of the Polar Bears that are out on the trail Saturday, please spot them on the QRP lists. 72, Ron Polityka WB3AAL Polar Bear #1 www.wb3aal.com www.n3epa.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3: PSK 31 What do I need?
About to order the KRX3 and upgrades for my #1288 and would like to work psk31 off my computer screen Do I need to order anything else or specific software to make this happen? Thanks. W6JDB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: PSK 31 What do I need?
Absolutely nothing. You can work PSK31 with just the basic K3 either directly with your CW paddles using data mode PSK-D, or with your favorite software with a couple audio cables between the K3 and the computer soundcard. You can set up PTT using the same K3 RS232 connection to the computer. - 73, Greg - AB7R Whidbey Island WA NA-065 On Fri Mar 13 6:09 , Jay sent: About to order the KRX3 and upgrades for my #1288 and would like to work psk31 off my computer screen Do I need to order anything else or specific software to make this happen? Thanks. W6JDB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: Elecraft@mailman.qth.net','','','')Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: PSK 31 What do I need?
Absolutely nothing. You can work PSK31 with just the basic K3 either directly with your CW paddles using data mode PSK-D, or with your favorite software with a couple audio cables between the K3 and the computer soundcard. You can set up PTT using the same K3 RS232 connection to the computer. - 73, Greg - AB7R Whidbey Island WA NA-065 On Fri Mar 13 6:09 , Jay sent: About to order the KRX3 and upgrades for my #1288 and would like to work psk31 off my computer screen Do I need to order anything else or specific software to make this happen? Thanks. W6JDB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: Elecraft@mailman.qth.net','','','')Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: PSK 31 What do I need?
BTW...if you are going to use you computer for PSK...you need to have the K3 data mode set to DATA-A and make sure your MIC SEL menu is set for Line-In. - 73, Greg - AB7R Whidbey Island WA NA-065 On Fri Mar 13 6:09 , Jay sent: About to order the KRX3 and upgrades for my #1288 and would like to work psk31 off my computer screen Do I need to order anything else or specific software to make this happen? Thanks. W6JDB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: Elecraft@mailman.qth.net','','','')Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] EQP Where's the Buzz?
I don't agree, it is possible to work across the pond on 160m at 5 watts. I havn't done it, but one of my radio colleagues has. I agree with Dale, it's possible to do this with 1w too. 73 de M0XDF, K3 #174 -- If all is not lost, where is it? On 13 Mar 2009, at 10:25, Lennart M wrote: ... and that means it is no use trying to work cross pond on 160. Bye from SM7BIC AR.. That is the rule, 100W max, so if your're QRO and normally up above 400W or so, then you can't enter a log. However, why not try running barefoot this time and see how you like it. You might find it an interesting challenge. Sorry to anyone you thinks I'm sticking my foot in here 73 de M0XDF, K3 #174 -- For all our conceits about being the center of the universe, we live in a routine planet of a humdrum star stuck away in an obscure corner ... on an unexceptional galaxy which is one of about 100 billion galaxies. ... That is the fundamental fact of the universe we inhabit, and it is very good for us to understand that. -Carl Sagan, astronomer and writer (1934-1996) On 13 Mar 2009, at 05:51, Jan Erik Holm wrote: From the rules: Please limit power to 100W maximum. Since I don´t operate at the 100W power level (or lower) does it mean I can´t take part in it? Just let me know and I will not bother. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Repeat Postings
Can someone please tell me why we now appear to get numerous repeat copies of the complete digest listings. It is very tedious and time wasting. 73 Jim G4NWJ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Repeat Postings
I am also getting repeat postings. I hope this can be eliminated. Roy Morris W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 vs K3 ?
I'm wondering if we took a ham into a room, blindfolded, sat him or her down if front of a K2 and K3, didn't let them touch either one, if he or she could tell which is the K2 and K3? I would have to be someone that doesn't have any experience with either one. I wonder which one would win based on sound alone. Also, they would have to use headphones rather than the internal speakers. Gary, N7HTS On Thu, 12 Mar 2009 13:03:21 -0700 Darwin, Keith keith.dar...@goodrich.com wrote: As much as I love my K3, I'll admit that the K2 sounded better. The difference wasn't big and I may be off-base, having not done a direct A/B comparison, but I think the K2, with its simpler RX architecture, has a smoother sound than the K3. Not enough for me to stay with the K2, but enough that it can be noticed. - Keith N1AS - - K3 711 - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Possible K2 sidetone mod
I don't have my K2 yet but should have it in about a week..depending on options. I noticed in the schematic that the side-tone output(U10B pre-amp) looks to be connected as a secondary input to AF-amp(U9 LM380). This makes me assume that side-tone volume is not fixed, but instead changes along with, and is a percentage of AF volume. If that is true, its a setup that I don't prefer. My (off-the top of my head) solution would be to splice in a 2N3904 on the output of U10B, and then move that output over to AF-OUT. That way, I always have a fixed side-tone volume, no mater what the AF volume is set at. Has anyone else done something like this already? Thanks Duane N1BBR -- bw...@fastmail.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] k2 or k3
I am sort of a test subject. 2 3? yr.s ago I ran WB4YDLs k2 on CW at our club FD. Last yr I ran his k3 on CW at FD. Pulled abt 900+ Qs each time. I was favoring the k2 for a while. But I went to his QTH?and played with the k3. I was converted. The k3 is a better receiver.The best I've ever tuned.?It has easier filter selection, 160m,6m, an internal ant. tuner and a lot more toys internally. I now own k3 #2626 with most bells whistles except the 2nd rx. ?After a month I'm still learning but I love it. This yr. our small club will be using 2 k3s during FD. CU in the EQP k9il. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possible K2 sidetone mod
Duane, That input to the LM380 chip is not the normal audio input (check the LM380 datasheet). The sidetone level is fixed by the menu parameters and is not variable with any knob. 73, Don W3FPR dw wrote: I don't have my K2 yet…but should have it in about a week..depending on options. I noticed in the schematic that the side-tone output(U10B pre-amp) looks to be connected as a secondary input to AF-amp(U9 LM380). This makes me assume that side-tone volume is not fixed, but instead changes along with, and is a percentage of AF volume. If that is true, its a setup that I don't prefer. My (off-the top of my head) solution would be to splice in a 2N3904 on the output of U10B, and then move that output over to AF-OUT. That way, I always have a fixed side-tone volume, no mater what the AF volume is set at. Has anyone else done something like this already? Thanks Duane N1BBR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: PSK 31 What do I need?
On Fri, 13 Mar 2009 07:09:40 -0700, Jay wrote: Do I need to order anything else or specific software to make this happen? Everything you need in the radio to run PSK or RTTY is part of the basic K3. No extras required. You can even run PSK or RTTY by sending with a paddle and letting the K3 decode for you. I have worked DXpeditions that way, and a few souls have even worked contests that way (I don't recommend it). For more serious PSK or RTTY work, you will want to use your computer sound card to generate the RTTY or PSK tones and to decode the tones. Most guys who use only RTTY use MMTTY, a freeware program that works by itself for general QSOs and integrates with several contest loggers (Writelog, N1MM) for contests. For PSK, the nicest software I know of is DM780, also freeware, distributed by the guy who wrote Ham Radio Deluxe, a very nice radio control program, also freeware. All of this stuff is easy to use and install on your computer. To use this software, you will need three cables between your computer and the K3. You need a serial cable for radio control, a cable from the sound card output to the radio input, and one from the radio output to the sound card input. You should also do the simple chassis bonding shown in my Power Point. http://audiosystemsgroup.com/HamInterfacing.pdf It's also explained in words in Chapter 8 of http://audiosystemsgroup.com/RFI-Ham.pdf 73, Jim Brown K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Data Mode Transmit Issue
I had a chance to do a little more investigating today. In summary, in data mode AFSK A and AFSK TX: OFF, F5 had no ticks (F2 and F4 had ticks). With AFSK TX: ON, no filter had ticks. With the data mode in DATA A, AFSK TX made no difference if it was on or off. F4 and F5 had no ticks, but F2 had the ticks. I'm not sure AFSK TX has fixed the root cause of the problem it was designed for. If the noise that the AFSK TX filter was designed to remove is actually caused by RFI, ground loops, low AF level, ... , why are there combinations of main filters on receive that don't display the ticks whether the AFSK TX filter is on or off? F5 never had the ticks on transmit. I believe that a single TX filter (F2 in my case) is used for transmit, so why do the various choices of RX filters affect the transmit ticks? Of course, the ticks I'm hearing may not be related to the other reported noise sources at all, but there still seems to be a problem. Can anyone else reproduce these results? Any thoughts Lyle? Joe N6KK - Original Message - From: Joe Barger bar...@aero.org To: Elecraft@mailman.qth.net Sent: Wednesday, March 11, 2009 5:45 PM Subject: [Elecraft] K3 Data Mode Transmit Issue The setup: K3 with latest firmware. Main Filters installed: F2 2.7 KHz F4 500 Hz F5 200 Hz F2 configured for all RX/TX modes F4 and F5 configured for CW and Data RX Configuration: TX Test (no RF out) Audio fed into line in (but no difference with mic input) Line in set for 4 bars ALC (but doesn't seem to make any difference how many bars) Data Mode selected Monitor turned up to comfortable level. If F5 is selected as the RX filter, all is well. But if either of the other filters is selected for RX and tones are transmitted, the tones have an audible tick with a frequency of (I'm guessing) around 40 Hz on top of the tone. The frequency of the tick changes slightly as the frequency of the tone changes. Audio input levels don't change the tick until the audio level approaches 0, then the ticks go away. Modifying shift or bandwidth doesn't affect the tick. Audio input signal is clean. Change the RX filter back to F5 and all is well again. Switch to USB and all is well with any filter. My guess is there is something funny (a bug?) with the selection of the Data TX filter. Anyone else have this problem? Any ideas? Thanks Joe N6KK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Possible K2 sidetone mod
dw wrote: I noticed in the schematic that the side-tone output(U10B pre-amp) looks to be connected as a secondary input to AF-amp(U9 LM380). This makes me assume that side-tone volume is not fixed, but instead changes along with, and is a percentage of AF volume. No, the side-tone volume is adjustable independent of the AF gain setting. The AF gain pot is between the product detector and the LM380. Sidetone volume is set through the menu, and is controlled via pin 1 of the DAC (U8) on the control board. Sidetone enters the LM380 without going through the AF gain pot. The LM380 output then goes directly to the headphones or speaker (see sheet 1 of the RF board schematic). -- Bill, AB1AV (Proud parent of a week-old K2, #6636) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] WANTED: XV 144 2m transverter
Ready built or unwanted kit? If shipping to the UK is a problem, I can provide a US address for delivery. PayPal payment available. g3...@yahoo.co.uk 73 Bob __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Data Mode Transmit Issue
After going back through the archives (which I should have done first), Iain, N6ML made a recording of the ticks I have heard ( http://www.mail-archive.com/elecraft@mailman.qth.net/msg68942.html ), so my observations just add to what the others that have already been reported. In my case, turning TEXT DEC on or off made no difference and trying REV DATA made no difference. Joe N6KK - Original Message - From: Joe Barger bar...@aero.org To: Elecraft@mailman.qth.net Sent: Friday, March 13, 2009 10:08 AM Subject: Re: [Elecraft] K3 Data Mode Transmit Issue I had a chance to do a little more investigating today. In summary, in data mode AFSK A and AFSK TX: OFF, F5 had no ticks (F2 and F4 had ticks). With AFSK TX: ON, no filter had ticks. With the data mode in DATA A, AFSK TX made no difference if it was on or off. F4 and F5 had no ticks, but F2 had the ticks. I'm not sure AFSK TX has fixed the root cause of the problem it was designed for. If the noise that the AFSK TX filter was designed to remove is actually caused by RFI, ground loops, low AF level, ... , why are there combinations of main filters on receive that don't display the ticks whether the AFSK TX filter is on or off? F5 never had the ticks on transmit. I believe that a single TX filter (F2 in my case) is used for transmit, so why do the various choices of RX filters affect the transmit ticks? Of course, the ticks I'm hearing may not be related to the other reported noise sources at all, but there still seems to be a problem. Can anyone else reproduce these results? Any thoughts Lyle? Joe N6KK - Original Message - From: Joe Barger bar...@aero.org To: Elecraft@mailman.qth.net Sent: Wednesday, March 11, 2009 5:45 PM Subject: [Elecraft] K3 Data Mode Transmit Issue The setup: K3 with latest firmware. Main Filters installed: F2 2.7 KHz F4 500 Hz F5 200 Hz F2 configured for all RX/TX modes F4 and F5 configured for CW and Data RX Configuration: TX Test (no RF out) Audio fed into line in (but no difference with mic input) Line in set for 4 bars ALC (but doesn't seem to make any difference how many bars) Data Mode selected Monitor turned up to comfortable level. If F5 is selected as the RX filter, all is well. But if either of the other filters is selected for RX and tones are transmitted, the tones have an audible tick with a frequency of (I'm guessing) around 40 Hz on top of the tone. The frequency of the tick changes slightly as the frequency of the tone changes. Audio input levels don't change the tick until the audio level approaches 0, then the ticks go away. Modifying shift or bandwidth doesn't affect the tick. Audio input signal is clean. Change the RX filter back to F5 and all is well again. Switch to USB and all is well with any filter. My guess is there is something funny (a bug?) with the selection of the Data TX filter. Anyone else have this problem? Any ideas? Thanks Joe N6KK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft Digest, Vol 59, Issue 26
I just checked to be surethe sidetone volume is independent of the AF gain. It's adjusted as a menu item. Changing AF gain has no effect on sidetone output. Parker WD8JOL K2 #2636 I don't have my K2 yet?but should have it in about a week..depending on options. I noticed in the schematic that the side-tone output(U10B pre-amp) looks to be connected as a secondary input to AF-amp(U9 LM380). This makes me assume that side-tone volume is not fixed, but instead changes along with, and is a percentage of AF volume. If that is true, its a setup that I don't prefer. Thanks Duane N1BBR -- bw...@fastmail.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Building a KX1
I posted a question yesterday but it did not seem to go through - the message was blank in the digest list. I believe I have found my answer but wanted to post again just as a test to see if I can actually post when/if I need help. Thanks and 73, Ron, AC2C Ellicott City, Maryland __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Building a KX1
What was your question now that you stirred up the interest...hi hi... I seen your blank post yesterday but we were seeing strange posts from somewhere else. Oh well... Mike WE0H K2 S/N 6698 Ron B wrote: I posted a question yesterday but it did not seem to go through - the message was blank in the digest list. I believe I have found my answer but wanted to post again just as a test to see if I can actually post when/if I need help. Thanks and 73, Ron, AC2C Ellicott City, Maryland __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Data Mode Transmit Issue
Can anyone else reproduce these results? Any thoughts Lyle? We have field test code that seems to fix this. I say seems to because everyone who has observed this and then tried the new code has further observed that the problem went away. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Building a KX1
Okay... I have ordered a KX1 with the ATU, paddle, and 30/80 board and was wondering if there was a recommended order for construction. I was finally able to find some older messages that seemed to run almost unanimous to proceed with the KX1 basic kit first, then add the options one at a time. I did see that I could mount L6 on the opposite side of the PC board in anticipation of the 30/80 board, but otherwise should just follow the manual and complete the KX1. So... That was it, and it didn't seem necessary to repost and get flamed for not having research enough. But, now that it's out there... Does anyone have any suggestions for me ? I'm expecting the package to arrive next Tuesday. 73, Ron, AC2C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Hardware Upgrades
I did upgrades today for early K3 #272. I considered these necessary: 12v sense PA REMIO UPGD RS232 isolation and AFOPMDKT speaker short circuit protection. I also ordered a new top cover to match the beautiful textured top cover Elecraft is sending with new K3s. The sides and bottom seem the same, already textured. And for some odd reason the side panels are even more expensive than the top. ??? I did -not- apply the AF Stage upgrade for LINE OUT and speaker can anyone suggest that there is a perceptable difference to be heard with this? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Building a KX1
Ron, Yes, you have the order of things correct. If you are a very experienced builder and have great confidence in your ability to make things work the first time through without interim testing, then you can integrate the KX1 and the KXB3080, but I would not recommend that for the first time through. If you do want to try it, you could build the KX1 without installing L7, C1, C26 and C27. Then follow the KXB3080 instructions *only* through page 4. At that point, you may test the KX1 on 40 and 20 meters. Once that combination is aligned working well, start on page 5 of the KXB3080 manual and finish it. One more note - do *not* add the KX1 Power Mod (included with the KXB3080 kit) unless your KX1 is not capable of producing 3.5 watts with a 13.8 volt power supply (3 watts with a 12 volt supply). Most of the KX1s with the newer PA transistor do not need the power mod, and running much over 4 watts for a period of time can damage the components in the PA output circuit. 73, Don W3FPR Ron Bower wrote: Okay... I have ordered a KX1 with the ATU, paddle, and 30/80 board and was wondering if there was a recommended order for construction. I was finally able to find some older messages that seemed to run almost unanimous to proceed with the KX1 basic kit first, then add the options one at a time. I did see that I could mount L6 on the opposite side of the PC board in anticipation of the 30/80 board, but otherwise should just follow the manual and complete the KX1. So... That was it, and it didn't seem necessary to repost and get flamed for not having research enough. But, now that it's out there... Does anyone have any suggestions for me ? I'm expecting the package to arrive next Tuesday. 73, Ron, AC2C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.0.237 / Virus Database: 270.11.13/1999 - Release Date: 03/13/09 05:59:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Hardware Upgrades
On Fri, 13 Mar 2009 12:11:28 -0700 (PDT), Don Rasmussen wrote: I did -not- apply the AF Stage upgrade for LINE OUT and speaker can anyone suggest that there is a perceptable difference to be heard with this I have not done it yet, but from the description, it should solve the distortion problem on the Line Out, which I consider serious if you use the line output. Most of us use it to feed the sound card for data modes. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Data Mode Transmit Issue
Thanks Lyle. I'll wait patiently for the new code. 73 Joe N6KK - Original Message - From: Lyle Johnson k...@wavecable.com To: Elecraft@mailman.qth.net Sent: Friday, March 13, 2009 12:03 PM Subject: Re: [Elecraft] K3 Data Mode Transmit Issue Can anyone else reproduce these results? Any thoughts Lyle? We have field test code that seems to fix this. I say seems to because everyone who has observed this and then tried the new code has further observed that the problem went away. 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Hardware Upgrades - correction
I stand corrected on the price of the cabinet parts, the reason the side panels were more expensive was I ordered two of them. ;-) Top Panel $37.40 - expensive yet IMO worth it based on the change of finish. Side Panel $31.40 - not any change that I can see and even if there was, a trifle spendy for my tastes. I'll be returning $62.80 worth of side panels. I did upgrades today for early K3 #272. I considered these necessary: 12v sense PA REMIO UPGD RS232 isolation and AFOPMDKT speaker short circuit protection. I also ordered a new top cover to match the beautiful textured top cover Elecraft is sending with new K3s. The sides and bottom seem the same, already textured. And for some odd reason the side panels are even more expensive than the top. ??? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] audio during DVR playback XMIT
Does someone who knows what is on the LIST look to see if someday we will be able to hear the memories while we transmit them??? like new menu items :XMT AUD ON/OFF... XMT MON LEVEL. I think I have seen this abt 4 or 5 times so far. tnx bill K3 #49 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] What info is available on the KPA100 thermal characteristics?
Just an off-the-cuff question. Are there any specs on the KPA100 heat-sink? Or any info at all on temperature rise with transmit duty cycle. I've looked through the KPA100 manual. It looks like we're using thermal pads instead of thermal heat-sink compound. Don't know what the pads are, so not sure what the thermal characteristics is on those? Does anyone know what the heat-sink thermal resistance rating is? Thanks Duane N1BBR -- bw...@fastmail.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Hardware Upgrades
I have now done all the hardware mods to my K3, none were particularly difficult to do. I even did modifications that are of no use to me, such as the -ve ALC and pull up resistor mods... At least my K3 is close to the same mod state as the current production units. The AF amplifier (replacement RF choke feeding the audio amp) did not seem to make any difference at my station, I am using a pair of HiFi bookshelf speakers. Likewise the line out mod didn't appear to make any difference, although for the most part I run Amtor or Pactor rather than sound card data modes. There is no real reason to not do these mods, they have no unwanted side effects and may in fact be of benefit. 73 Dave, G4AON K3/100 #80 - I did -not- apply the AF Stage upgrade for LINE OUT and speaker can anyone suggest that there is a perceptable difference to be heard with this? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Hardware Upgrades
Although I don't recall seeing anything about it on here, the latest KRX3 Errata Sheet C-6, dated 3 March 2009 refers to the cutting of two tracks on the main RF board to ensure D-A converters always receive the proper signal level. I have yet to do this mod on my K3. 73 David In a recent message, Dave G4AON elecr...@astromag.co.uk writes I have now done all the hardware mods to my K3, none were particularly difficult to do. I even did modifications that are of no use to me, such as the -ve ALC and pull up resistor mods... At least my K3 is close to the same mod state as the current production units. The AF amplifier (replacement RF choke feeding the audio amp) did not seem to make any difference at my station, I am using a pair of HiFi bookshelf speakers. Likewise the line out mod didn't appear to make any difference, although for the most part I run Amtor or Pactor rather than sound card data modes. There is no real reason to not do these mods, they have no unwanted side effects and may in fact be of benefit. -- David G4DMP Leeds, England, UK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Repeat Postings
This happens to me quite often. I've found it is my ISP and it's not just Elecraft postings. I have to delete the postings via webmail otherwise they keep downloading scores of copies. David G3UNA - Original Message - From: Roy Morris w4...@carolina.rr.com To: elecraft@mailman.qth.net Sent: Friday, March 13, 2009 3:09 PM Subject: [Elecraft] Repeat Postings I am also getting repeat postings. I hope this can be eliminated. Roy Morris W4WFB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 vs K3 ?
Gary and All, Well, interesting conjecture, but nowhere close to a valid test of either rig. Dave W7AQK - Original Message - From: Gary D Krause n7...@bresnan.net To: Elecraft elecraft@mailman.qth.net Sent: Friday, March 13, 2009 8:27 AM Subject: Re: [Elecraft] K2 vs K3 ? I'm wondering if we took a ham into a room, blindfolded, sat him or her down if front of a K2 and K3, didn't let them touch either one, if he or she could tell which is the K2 and K3? I would have to be someone that doesn't have any experience with either one. I wonder which one would win based on sound alone. Also, they would have to use headphones rather than the internal speakers. Gary, N7HTS On Thu, 12 Mar 2009 13:03:21 -0700 Darwin, Keith keith.dar...@goodrich.com wrote: As much as I love my K3, I'll admit that the K2 sounded better. The difference wasn't big and I may be off-base, having not done a direct A/B comparison, but I think the K2, with its simpler RX architecture, has a smoother sound than the K3. Not enough for me to stay with the K2, but enough that it can be noticed. - Keith N1AS - - K3 711 - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Hardware Upgrades
Natural questions: 1) What are symptoms of them not being cut? 2) About what vintage main RF board are they not cut? At least it looks easy to get to. 73 de Brian/K3KO David Pratt wrote: Although I don't recall seeing anything about it on here, the latest KRX3 Errata Sheet C-6, dated 3 March 2009 refers to the cutting of two tracks on the main RF board to ensure D-A converters always receive the proper signal level. I have yet to do this mod on my K3. 73 David In a recent message, Dave G4AON elecr...@astromag.co.uk writes I have now done all the hardware mods to my K3, none were particularly difficult to do. I even did modifications that are of no use to me, such as the -ve ALC and pull up resistor mods... At least my K3 is close to the same mod state as the current production units. The AF amplifier (replacement RF choke feeding the audio amp) did not seem to make any difference at my station, I am using a pair of HiFi bookshelf speakers. Likewise the line out mod didn't appear to make any difference, although for the most part I run Amtor or Pactor rather than sound card data modes. There is no real reason to not do these mods, they have no unwanted side effects and may in fact be of benefit. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Repeat Postings
Jim Chick wrote: Can someone please tell me why we now appear to get numerous repeat copies of the complete digest listings. It is very tedious and time wasting. Assuming it isn't a deliberate denial of service attack, someone who doesn't know how to use their email client is trying to reply (or post by tail-ending) to a non-MIME list digest (or using a mail client with particularly poor MIME digest handling), without pruning it, and is failing to realise the havoc they are causing. I suspect it may prove necessary to bar them from the list. I'm not sure why we aren't getting the complete digest as I didn't think that gmail had particularly small size limits. non-MIME digests should only be used for replies as a last resort and only if you have a thorough understanding of the internals of internet email protocols. Whilst you can prune out the other articles, you will still break threading. -- David Woolley The Elecraft list is a forum for the discussion of topics related to Elecraft products and more general topics related ham radio List Guidelines http://www.elecraft.com/elecraft_list_guidelines.htm __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Topband Dinner at Visalia
Friends, I'm trying to reserve a seat at the Visalia topband dinner, and just tried to post a request on the Topband reflector asking the person organizing the dinner to contact me. W4ZV, the administrator of topband, rejected my post as inappropriate. Huh? Since when is a topband dinner at a major hamfest off topic of a topband email list? Anyhow, I'm still trying to reserve a seat at the Visalia topband dinner. Would someone pass the word for me to whoever is organizing it? Thanks and 73, Jim Brown K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Confusions!
Thanks and 73, Ron, AC2C Ellicott City, Maryland That name and call caused me to do a double-take! 73, Ron AC7AC South Beach, Oregon __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft Digest, Vol 59, Issue 22
Hi Sara, I am glad you found it! Welcome back. 73, Eric _..._ Sara - VU3RSB wrote: Eric Swartz - WA6HHQ, Elecraft wrote: I just got home from dinner. I've put this email address on moderate until we can figure out what is wrong on their end. Looks like their email program is stuck in a send loop. Eric WA6HHQ _..._ -Original Message- From: Sarath - Vu3rsb vu3...@gmail.com Date: Thursday, Mar 12, 2009 9:28 pm Subject: Re: [Elecraft] Elecraft Digest, Vol 59, Issue 22 To: elecraft@mailman.qth.net Dear Eric While on roaming my mobile got some virus and keep sending the mails... I have removed the mail account and fixed. I am really sorry to whole group who got the so many emails. I have removed the mail account from my mobile to resolve the issue. Regret for delay. -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
