[Elecraft] K2 total loss

[Johnny Siu via Elecraft]

You need also a proper desoldering tool.  If still no luck, pass it to Don 
W3FPR as suggested by Wayne.  Don guided me for a number of K2 repairs in the 
past.
73
Johnny VR2XMC

  寄件人︰ lstavenhagen 
 收件人︰ elecraft@mailman.qth.net 
 傳送日期︰ 2016年04月15日 (週五) 4:25 AM
 主題︰ Re: [Elecraft] K2 total loss
   
Hi Wayne,
Ah, ok, well... let me take another look, then. This is in the bandpass
filter so didn't know how critical this was...

Tnx es 73,
LS
W5QD



  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Ken]

On 4/14/16 8:22 PM, Barry Jablonski wrote:
In the software world it's called spaghetti code -- _in the hardware 
world it's an octopus's garden. _



That is why we no longer call it "Wireless"  ;-)

Ken WA8JXM
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] New from Elecraft: High-Performance 200-Hz, 6-pole Crystal Filter

[Wayne Burdick]

Some of you may recall that we discontinued our 5-pole, 200-Hz filter last 
year. Our replacement for this filter has cleared all of our stringent test 
hurdles and is now available on our order page.

The new filter (KFL3C-200) has six poles rather than five, significantly 
improving skirt selectivity. And at the center, the passband is 200 Hz at 6 dB 
down -- ideal for CW and narrowband data operation in high-QRM or QRN 
situations. (Our 5-pole filter was already a favorite of 160 meter CW contest 
veterans. The KFL3C-200 takes it up another notch. Maybe two.)

Plots for all of our filters, including an overlay comparing the KFL3A-250 
(INRAD 8-pole) to the new KFL3C-200, can be found at:

  http://www.elecraft.com/K3/K3_filter_plots.htm

Next week, when we're all recuperating from the Visalia DX convention, we'll 
provide a link to a plot showing the 5-pole vs. 6-pole filter passband. The 
improvement in skirt selectivity is quite pronounced.

This filter can be installed in a K3, K3S, or the sub receiver. To order, see:

  http://www.elecraft.com/elecraft_prod_list.htm#k3filters

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 sound recording

[Mike Goldstein]

I've been asked to do a workshop on contesting techniques next 
autumn, so I'm working on an audio/visual presentation.


Here's the question: For my K3, if I connect a line between the K3 
LINE OUT and the PC's LINE IN, will I be able to record 
(using  software such as Audacity) all audio present in my K3 speaker 
or headphones?  I want to record CW and

SSB contest QSOs, to illustrate my contesting techniques.

Thanks, Mike Goldstein VE3GFN
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

Gary,

I've already framed this and hung it in the hallway. Thanks for your ongoing 
support!

73,
Wayne
N6KR


On Apr 14, 2016, at 6:21 PM, "Gary Smith"  wrote:

> Wayne & Eric,
> 
> Here's the way it is, according to me: 
> 
> I really like the radios and equipment you 
> make. Flash is pretty but I crave an 
> eloquent solution for what I want to do 
> and I don't honestly give too much of a 
> flip as to how somebody else wants their 
> radio to be. 
> 
> One thing is for sure, I don't want a 
> "one-time radio is all it is, take it or 
> leave it", you buy it & that's what it is 
> forever more. I want a radio that I can 
> configure to what I want to do with it, 
> get it right for me, and leave it 
> configured that way. 
> 
> I'm a creature of habit and once it works 
> right for me, I'll know how to use it the 
> next time and for as long as I wish, it 
> will perform just how I want it to; no 
> mysteries. I want a radio that is updated 
> such that hardware and software are made 
> available to improve what I had earlier 
> bought. Elecraft does this and none of the 
> others do. Made here in the USA too. Put 
> that on the wish list for Icom.
> 
> Would I like a big knob here & there? Not 
> if I'm not going to use it. Do I need a 
> better contesting rig? With my K3 and wire 
> antennas I keep on winning state and 
> division contests in my class, I don't 
> think more knobs would give me better 
> scores. Faster typing might help and maybe 
> better ears but that's organic deficits, 
> not electronic. 
> 
> Would I like a big rig that is a cross 
> between a computer and a microwave? No, 
> not unless it also cooks for me like a 
> microwave in the middle of one of those 
> contests. I'll take a BrontoBurger with 
> cheese & Chippotle sauce from the 
> replicator, please.
> 
> You two are a whole lot younger than I am 
> and with that, the odds being what they 
> are, you'll likely be designing and making 
> radios well after I'm gone from this coil. 
> So with that little bit of reality I can 
> say that there is nobody who makes a radio 
> I want more than my K3s at this time. You 
> keep innovating and I'll have a company to 
> support and in the process, I'll spruce up 
> my shack in these here Golden years with 
> the finest upcoming radios money can buy.
> 
> I don't need the newest and greatest 
> immediately, I can wait. But when I do 
> want that, I know exactly where to get it; 
> on Westridge Drive in Watsonville, 
> California.
> 
> 73,
> 
> Gary
> KA1J
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Gary Smith]

Wayne & Eric,

Here's the way it is, according to me: 

I really like the radios and equipment you 
make. Flash is pretty but I crave an 
eloquent solution for what I want to do 
and I don't honestly give too much of a 
flip as to how somebody else wants their 
radio to be. 

One thing is for sure, I don't want a 
"one-time radio is all it is, take it or 
leave it", you buy it & that's what it is 
forever more. I want a radio that I can 
configure to what I want to do with it, 
get it right for me, and leave it 
configured that way. 

I'm a creature of habit and once it works 
right for me, I'll know how to use it the 
next time and for as long as I wish, it 
will perform just how I want it to; no 
mysteries. I want a radio that is updated 
such that hardware and software are made 
available to improve what I had earlier 
bought. Elecraft does this and none of the 
others do. Made here in the USA too. Put 
that on the wish list for Icom.

Would I like a big knob here & there? Not 
if I'm not going to use it. Do I need a 
better contesting rig? With my K3 and wire 
antennas I keep on winning state and 
division contests in my class, I don't 
think more knobs would give me better 
scores. Faster typing might help and maybe 
better ears but that's organic deficits, 
not electronic. 

Would I like a big rig that is a cross 
between a computer and a microwave? No, 
not unless it also cooks for me like a 
microwave in the middle of one of those 
contests. I'll take a BrontoBurger with 
cheese & Chippotle sauce from the 
replicator, please.

You two are a whole lot younger than I am 
and with that, the odds being what they 
are, you'll likely be designing and making 
radios well after I'm gone from this coil. 
So with that little bit of reality I can 
say that there is nobody who makes a radio 
I want more than my K3s at this time. You 
keep innovating and I'll have a company to 
support and in the process, I'll spruce up 
my shack in these here Golden years with 
the finest upcoming radios money can buy.

I don't need the newest and greatest 
immediately, I can wait. But when I do 
want that, I know exactly where to get it; 
on Westridge Drive in Watsonville, 
California.

73,

Gary
KA1J

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[John Pitz]

I don't want to cause excessive topic drift here, but I really
appreciate the various simple options that the KX3 provides.  If I want
to do digital, there is the IQ output.  If I want to do ssb, there is
mic input.  If I want computer control or to update the firmware there
is an RS232 input.  I can use any or all of them as my needs at the
moment dictate.  Having the rs232 by the way enables me to use a
microcontroller to control the radio.  If the KX3 used USB there is no
way that most people will be able to put together a microcontroller
project to control their radio.  Just about anyone can program for
RS232, very few can deal with a USB stack.  I will gladly deal with the
cabling in exchange of the flexibility that it enables.  Just one
customer's pennies worth.  Have a great night everyone.


On Thu, 2016-04-14 at 17:38 -0700, Wayne Burdick wrote:

> Done. For most applications, a single USB cable to the radio (K3S, or a K3 
> with a KIO3B module) is all that's required for combined computer data and 
> audio. 
> 
> We provide lots of other DC, audio, and digital I/O too, just in case you 
> need it. For example, we provide a second headphone jack, second mic jack, 
> and stereo speaker outputs on the back. Just in case.
> 
> No way to get rid of the DC input jack, antenna jack, and ground screw, of 
> course. 
> 
> I suppose the keyer paddle could go to Bluetooth?
> 
> 73,
> Wayne
> N6KR
> 
> 
> On Apr 14, 2016, at 5:22 PM, Barry Jablonski  wrote:
> 
> > Hi Keith,
> > 
> > I totally agree.  In the software world it's called spaghetti code -- in 
> > the hardware world it's an octopus's garden.  RS-232 is so 30 years old!  
> > All modern radios
> > have one go's into and one go's out'a.  Using standard modern protocols.  
> > Elecraft needs to join the modern world.
> > 
> > Barry
> > 
> > 
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> > 
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n...@elecraft.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to crustac...@brig-elec.com
> 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

Done. For most applications, a single USB cable to the radio (K3S, or a K3 with 
a KIO3B module) is all that's required for combined computer data and audio. 

We provide lots of other DC, audio, and digital I/O too, just in case you need 
it. For example, we provide a second headphone jack, second mic jack, and 
stereo speaker outputs on the back. Just in case.

No way to get rid of the DC input jack, antenna jack, and ground screw, of 
course. 

I suppose the keyer paddle could go to Bluetooth?

73,
Wayne
N6KR


On Apr 14, 2016, at 5:22 PM, Barry Jablonski  wrote:

> Hi Keith,
> 
> I totally agree.  In the software world it's called spaghetti code -- in the 
> hardware world it's an octopus's garden.  RS-232 is so 30 years old!  All 
> modern radios
> have one go's into and one go's out'a.  Using standard modern protocols.  
> Elecraft needs to join the modern world.
> 
> Barry
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Barry Jablonski]

Hi Keith,

I totally agree.  In the software world it's called spaghetti code -- in 
the hardware world it's an octopus's garden.  RS-232 is so 30 years 
old!  All modern radios
have one go's into and one go's out'a.  Using standard modern 
protocols.  Elecraft needs to join the modern world.


Barry


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] Re: K-Pod hands-on test opportunity; request for K-Pod application ideas

[Kevin Stover]

Yeah sure...it's called a laptop.

On 4/14/2016 1:08 PM, Rick WA6NHC wrote:
So it's within the realm of possibilities that a device similar to the 
K-pod could be made using the RJ-45, with a sound card added, for full 
network access?  That would simplify remote ops or allow a tablet to 
control or even more.  If you can control the radio via that port, the 
K3/S is nearly at that point now.


Rick wa6nhc






--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3-RRC-WinKey question

[Fred Jensen]

I use my K3 with the RRC-1258 box for operating W7RN remotely.  My 
paddle keys the WinkeyUSB which keys the RRC box through a couple of 
pins on the rear RJ-45 connector.  I also have a stealth EFHW running on 
top of the back fence, and an RS-232 A/B switch to switch from local to 
remote.


The Winkey has two key outputs.  Anybody know for sure that I can have 
both the RRC box and K3 connected to the Winkey at the same time?  It 
looks to me like they're isolated, but not sure.  Way too many cables 
behind my "wireless".


73,

Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 total loss

[lstavenhagen]

I might take another look at it this evening. I burned up yet another relay
replacing the first one so I'll have to extract it too. I could rob a relay
out of my KAT2 kit (which I think uses the same type) for that and just
order replacements in the meanwhile.

So I might be able to continue provided I a) don't tear up yet another set
of holes and b) mind the soldering iron this final time LOL.

Tnx es 73,
LS
W5QD


Elecraft mailing list wrote
> I've fixed some pretty messed up boards over the years.I would be quite
> surprised if it was truly a total loss.
> Personally I'd take a breath and set it aside then look at it with a clear
> head later.
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:

> Elecraft@.qth

> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to 

> lists+1215531472858-365791@.nabble





--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K2-total-loss-tp7616355p7616369.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Bob Novas]

https://en.wikipedia.org/wiki/Small_matter_of_programming  

No no, it's a minor detail.

Bob, W3DK

> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Fred
> Jensen
> Sent: Thursday, April 14, 2016 5:35 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S
and K3
> Transceivers
> 
> "Just as there are no smart cows, there are no 'small matters of
programming'."
> :-))
> 
> 73,
> 
> Fred K6DGW
> - Northern California Contest Club
> - CU in the Cal QSO Party 1-2 Oct 2016
> - www.cqp.org
> 
> On 4/14/2016 12:54 PM, Wayne Burdick wrote:
> > Hi Dave,
> >
> > Probably a small matter of programming, but we haven't tried it yet.
> >
> > Wayne
> > N6KR
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
Message
> delivered to bob.no...@verizon.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Tr ansceivers

[a...@juno.com]

Intel leak on Elecraft's next product (currently being beta-tested):
http://s566.photobucket.com/user/ae5x/media/Radio/kwatch_zpsuyeaue1t.jpg.html

John AE5X
http://ae5x.blogspot.com


Wall Street Daily
Peter Schiff: China Just Armed its Financial Missile
http://thirdpartyoffers.juno.com/TGL3131/571012c472d512c36ed7st04vuc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] FS West Mountain Radio CLRspkr

[Steven Bertsch]

For Sale: West Mountain Radio CLRspkr - brand new in the box, never opened. 
Selling it because a friend gave me his CLRspkr after I ordered this one. 
Asking $200 which includes shipping. I can ship it tomorrow if you pay using 
PayPal.

Steve K6SAB


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Fred Jensen]

"Just as there are no smart cows, there are no 'small matters of 
programming'." :-))


73,

Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org

On 4/14/2016 12:54 PM, Wayne Burdick wrote:

Hi Dave,

Probably a small matter of programming, but we haven't tried it yet.

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Trans...

[Mike Hagele AC6JA via Elecraft]

Has there been any thought of coming up with a wireless control console for 
 the K3(s) similar to the Flex Radio Maestro?
I've dreamt many times of being  able to sit in my backyard and being able 
to fully control my K3 base station  wirelessly over my home Wifi network.
I know there is the remote radio combo available, but too many boxes and  
wires.
It just would be nice to have everything in one box with a rechargeable  
battery.
Any interest?
 
Mike  AC6JA
 
 
In a message dated 4/14/2016 1:27:56 P.M. Pacific Daylight Time,  
n...@elecraft.com writes:

Hi  Dave,

Probably a small matter of programming, but we haven't tried it  yet.

Wayne
N6KR


On Apr 14, 2016, at 12:39 PM, Dave W8FGU   wrote:

> Hey Wayne,
> 
> As  usual, an impressive product.
> 
> Any chance we might be able to  use the knob to emulate the QSY function 
on the P3 in the future? I would love  to use that bigger knob to move the 
cursor on the P3. Maybe even set the  markers as well.
> 
> 73,
> Dave W8FGU
>  


__
Elecraft  mailing list
Home:  http://mailman.qth.net/mailman/listinfo/elecraft
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Elecraft@mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html
Message delivered to  ac...@aol.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 total loss

[Harry Yingst via Elecraft]

I've fixed some pretty messed up boards over the years.I would be quite 
surprised if it was truly a total loss.
Personally I'd take a breath and set it aside then look at it with a clear head 
later.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Dave W8FGU]

Sounds very promising. Thanks Wayne!

Dave W8FGU


On 4/14/2016 3:54:09 PM, "Wayne Burdick"  wrote:


Hi Dave,

Probably a small matter of programming, but we haven't tried it yet.

Wayne
N6KR


On Apr 14, 2016, at 12:39 PM, Dave W8FGU  wrote:


 Hey Wayne,

 As usual, an impressive product.

 Any chance we might be able to use the knob to emulate the QSY 
function on the P3 in the future? I would love to use that bigger knob 
to move the cursor on the P3. Maybe even set the markers as well.


 73,
 Dave W8FGU






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[lstavenhagen]

Very cool, I want one! 
As for wireless, I would share the concern that has been expressed about
batteries and additional electronics everywhere. In fact, it's for that very
reason that I've virtually eliminated wireless mice, keyboards and other
accessories in all of my computer operations and gone back to old-school
wires.

Yes, wires have their problems, but you never have to charge them up or
watch the equipment slowly degrade over time before you figure out that,
hey, when was the last time I changed that battery... that I can't get to
because I don't have a screwdriver that fits... and the connector is faulty
and intermittent anyway and the wired replacement is cheaper and 

hi hi.

Also Bluetooth has a history of being upgraded in such a way as to obsolete
hardware that has older BT equipment in it, so I've been gunshy of BT ever
since then...

73,
LS
W5QD



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616345p7616362.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 total loss

[lstavenhagen]

Hi Wayne,
Ah, ok, well... let me take another look, then. This is in the bandpass
filter so didn't know how critical this was...

Tnx es 73,
LS
W5QD



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K2-total-loss-tp7616355p7616361.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 total loss

[Wayne Burdick]

Good luck either way, LS. If you end up with a wire or two, they can go on the 
bottom of the board. The radio will still look and work great.

Wayne



On Apr 14, 2016, at 1:11 PM, lstavenhagen  wrote:

> Hi Wayne,
> 
> Well it's totally my fault for not using the right tools for this lol. I'll
> take a look at the pain in the rear/loss ratio after I cheer up a bit and
> then think about sending it to Don. In the end that may be the more sensible
> thing to do, maybe after getting some sleep lol.
> 
> Tnx es 73,
> LS
> W5QD
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/K2-total-loss-tp7616355p7616359.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 total loss

[lstavenhagen]

Hi Wayne,

Well it's totally my fault for not using the right tools for this lol. I'll
take a look at the pain in the rear/loss ratio after I cheer up a bit and
then think about sending it to Don. In the end that may be the more sensible
thing to do, maybe after getting some sleep lol.

Tnx es 73,
LS
W5QD



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K2-total-loss-tp7616355p7616359.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 total loss

[Wayne Burdick]

LS,

Sorry to hear about this. I bet Don (W3FPR) could fix it for you quickly and 
economically.

Wayne
N6KR


On Apr 14, 2016, at 12:53 PM, lstavenhagen  wrote:

> Just in case anyone's interested, I'm scrapping my K2 build and calling it a
> slightly overpriced parts collection for my first K2. My attempt to pull my
> burned relay failed and pulled up a couple of the pads. I also managed to
> burn the relay next to much worse than the one I was trying to replace.
> 
> So looking at the damage to the board and everything I'd have to do to try
> to make it work like run wires, etc., I just decided to stop here and write
> it off. 
> 
> The good news is, I have a spare front panel and control board in perfect
> working condition and still quite a few uninstalled parts I could keep as
> spares for the original K2. Virtually all of the transmitter parts for
> example and quite a few of the cores 
> 
> Oh well, you pays your money and you takes your chances. 
> 
> 73,
> LS
> W5QD


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Dauer, Edward]

Thanks for replying, Wayne.  I was certain that you’d considered it.

Just sitting here dreaming about having a wireless keyer paddle, wireless
control among the K3 / KPA / KAT (other than the RF), wireless video to
the P3, wireless headset, and wherever else the haystack could be trimmed.
 And if Nikola Tesla had realized his dream long ago, the power could be
there too!

But, as I said, my order for the K-Pod will be among the first.

Well done; and thanks again.

EAD






On 4/14/16, 1:25 PM, "Wayne Burdick"  wrote:

>
>On Apr 14, 2016, at 11:55 AM, "Dauer, Edward"  wrote:
>
>> 
>> Very nice addition to the lineup. Congrats to the team.
>> 
>> I never thought I needed such a thing; but now I see that it is
>>absolutely
>> indispensable.  Of course I¹ll buy one.
>> 
>> Having said that, and not at all meaning to be critical or ungrateful,
>>I¹d
>> like to wonder aloud why we still need cables - and the K-pod will add
>>two
>> more to the unruly collection already hiding behind my desk, as I read
>> what¹s been printed so far.  (Do I have that part right?)  Computer
>> hardware manufacturers pretty much gave up on inter-unit cabling long
>>ago,
>> thank goodness.  Is there a reason why RF equipment couldn¹t do the
>>same?
>> Please take this as a serious question, not a complaint.  I¹d be
>> interested in knowing the technical challenges to making it happen.
>
>Hi Ed,
>
>It can be just a single cable if you make the simple mod to the rig's
>front panel that provides power to the pod.
>
>Wifi or bluetooth would have added a lot to the cost, not to mention the
>requirement to put a battery in the pod. The optical encoder uses 30 mA
>so you'd end up charging it a lot -- by connecting a cable.
>
>Wayne
>N6KR
>
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

Hi Dave,

Probably a small matter of programming, but we haven't tried it yet.

Wayne
N6KR


On Apr 14, 2016, at 12:39 PM, Dave W8FGU  wrote:

> Hey Wayne,
> 
> As usual, an impressive product.
> 
> Any chance we might be able to use the knob to emulate the QSY function on 
> the P3 in the future? I would love to use that bigger knob to move the cursor 
> on the P3. Maybe even set the markers as well.
> 
> 73,
> Dave W8FGU
> 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K2 total loss

[lstavenhagen]

Just in case anyone's interested, I'm scrapping my K2 build and calling it a
slightly overpriced parts collection for my first K2. My attempt to pull my
burned relay failed and pulled up a couple of the pads. I also managed to
burn the relay next to much worse than the one I was trying to replace.

So looking at the damage to the board and everything I'd have to do to try
to make it work like run wires, etc., I just decided to stop here and write
it off. 

The good news is, I have a spare front panel and control board in perfect
working condition and still quite a few uninstalled parts I could keep as
spares for the original K2. Virtually all of the transmitter parts for
example and quite a few of the cores 

Oh well, you pays your money and you takes your chances. 

73,
LS
W5QD



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K2-total-loss-tp7616355.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Bill Frantz]

I see this device as a fix for one if the biggest issues I have 
trying to rise to the top of a DX pileup while running split -- 
hitting the VFO A or RIT/XIT knob and losing the DX. I currently 
solve that problem by locking VFO A, but this means that fine 
adjustments of tuning for him take a couple of extra steps. It 
also means that VFO A is locked on different bands if I decide 
to see what else is on while I wait for the pileup to die down 
or propagation to improve. It looks like the switch on the K-Pod 
will be hard enough to move to make it another solution to the problem.


If it is really just a mirror for the VFO B knob, i will still 
not be able to tune in the pileup while monitoring the power 
supply voltage on the K3. It might be nice if it was VFO B while 
the K3's VFO B know remained the selector for the measurement to 
monito (time, volts, amps, etc.)


73 Bill AE6JV

---
Bill Frantz| "The only thing we have to   | Periwinkle
(408)356-8506  | fear is fear itself." - FDR  | 16345 
Englewood Ave
www.pwpconsult.com | Inaugural address, 3/4/1933  | Los Gatos, 
CA 95032


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Dave W8FGU]

 Hey Wayne,

As usual, an impressive product.

Any chance we might be able to use the knob to emulate the QSY function 
on the P3 in the future? I would love to use that bigger knob to move 
the cursor on the P3. Maybe even set the markers as well.


73,
Dave W8FGU




On 4/13/2016 11:04:50 PM, "Wayne Burdick"  wrote:


Hi all,

We've had many requests for a small control panel (or pod) as an 
extension to the K3 and K3S transceivers. We finally got around to it!


Our new K-Pod is a very compact unit, featuring a precision tuning 
knob, VFO A/B/offset rocker switch, and 8 programmable tactile-feedback 
switches. Switch feedback is provided by activation messages on the 
radio's LCD, as well as the pod's own 4 indicator LEDs and audio tone 
generator. This multi-modal information can help maximize operating 
efficiency and reduce fatigue during extended operating periods.


Typically the K-Pod would be placed next to a computer keyboard, 
allowing the operator to quickly QSY, clear RIT, enter diversity mode, 
change menu settings, etc., without that long stretch to reach the 
radio's front panel.


But the K-Pod's flexible interface goes beyond substitution of the 
radio's knobs and switches. In effect, you can design your own 
customized controls for the radio.


Each of the 8 programmable switches has tap and hold functions. When a 
switch function is used, it activates one of up to 16 user-defined 
command sequences that are actually stored in the radio itself, as 
macros. A single macro can accomplish many tasks at once, such as 
setting up custom splits, configuring the receiver or subreceiver for 
specific situations, sending transmit messages at differing code 
speeds, etc. Macros can be easily created or edited using K3 Utility, 
which runs on PC, Mac, or Linux platforms.


The K-Pod has the following features:

* high-quality weighted, soft-touch tuning knob--same as used on the 
K3S

* same 400-count, ball-bearing optical encoder used in the K3 and K3S
* adjustable knob friction
* 3-position rocker switch to assign the knob to VFO A, VFO B, or 
RIT/XIT

* 8 programmable function switches, each with tap/hold functions
* simple switch programming using K3 Utility (many examples in K-Pod 
manual)
* four user-definable LEDs (three of them show knob assignment by 
default)

* audio tone generator for switch feedback (can be easily turned off)
* USB port for firmware loading and future equipment/computer control 
applications
* simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath 
the front panel

* flexible power source: rear 12-V jack on the radio, DC barrel jack,
  USB port, or even through the 6-pin data cable, with minor radio 
modification
  (the latter method results in a single cable to the K-Pod for data 
and power)

* 3 utility outputs for miscellaneous equipment control applications
  (outputs provide a low resistance to ground when turned on, usable 
with relays, etc.)


The K-Pod's all-steel enclosure weighs a full pound for excellent 
stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable 
folding tilt stand is included to angle the panel for optimal access. 
There's also a 2-hole RAM mount pattern on the bottom for easy 
attachment to any surface.


For photos and further information, please visit our K-Pod web page:

  http://www.elecraft.com/k-pod/k-pod.htm

73,
Wayne, N6KR
Eric, WA6HHQ




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to d...@w8fgu.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Joe Subich, W4TV]

On 4/14/2016 2:31 PM, Wayne Burdick wrote:
>
> The USB cable would only be needed when updating the firmware, and
> even that might be possible through the data cable.

what about the other way around?  Will it be possible to update the
K3 and/or P3 through the K-Pod - perhaps even use the K-Pod as a
USB interface for control of the K3?

73,

   ... Joe, W4TV


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[KV5J via Elecraft]

It's a no for me.  Too many wires now.  I can't believe the difference in
wires behind my SDR radio and my K3s.  The K3s is a rats nest.

Keith



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616351.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

On Apr 14, 2016, at 11:55 AM, "Dauer, Edward"  wrote:

> 
> Very nice addition to the lineup. Congrats to the team.
> 
> I never thought I needed such a thing; but now I see that it is absolutely
> indispensable.  Of course I¹ll buy one.
> 
> Having said that, and not at all meaning to be critical or ungrateful, I¹d
> like to wonder aloud why we still need cables - and the K-pod will add two
> more to the unruly collection already hiding behind my desk, as I read
> what¹s been printed so far.  (Do I have that part right?)  Computer
> hardware manufacturers pretty much gave up on inter-unit cabling long ago,
> thank goodness.  Is there a reason why RF equipment couldn¹t do the same?
> Please take this as a serious question, not a complaint.  I¹d be
> interested in knowing the technical challenges to making it happen.

Hi Ed,

It can be just a single cable if you make the simple mod to the rig's front 
panel that provides power to the pod.

Wifi or bluetooth would have added a lot to the cost, not to mention the 
requirement to put a battery in the pod. The optical encoder uses 30 mA so 
you'd end up charging it a lot -- by connecting a cable.

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] Re: K-Pod hands-on test opportunity; request for K-Pod application ideas

[Wayne Burdick]

On Apr 14, 2016, at 11:08 AM, "Rick WA6NHC wa6...@gmail.com [Elecraft_K3]" 
 wrote:

> So it's within the realm of possibilities that a device similar to the K-pod 
> could be made using the RJ-45, with a sound card added, for full network 
> access? 

No. The RJ12 jack on the K3/K3S front panel provides a nonstandard data 
interface that we use with the K-Pod and special firmware. The jack's other use 
is for loading firmware into the radio.

Wayne
N6KR




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

At minimum, you need a data cable (to the RJ jack on beneath the rig's front 
panel). This cable can optionally supply power to the pod as well. Or you can 
use an external supply.

The USB cable would only be needed when updating the firmware, and even that 
might be possible through the data cable.

Wayne
N6KR


On Apr 14, 2016, at 11:28 AM, kk5na  wrote:

> So, it needs the control cable, a power cable and could possibly have a third 
> cable for USB?
> 
> Joe KK5NA
> 
> On 4/14/2016 11:41 AM, Wayne Burdick wrote:
>> On Apr 14, 2016, at 9:33 AM, Mike Dodd  wrote:
>> 
>>> The K-Pod datasheet says, "A USB port is provided on the K-Pod for firmware 
>>> updates and future station control uses."
>>> 
>>> Does this mean I can connect the USB cable to my PC only when I want to 
>>> upgrade the firmware using the K-Pod Utility?
>>> 
>>> Or must the USB be always connected?
>> You'd only need to connect the USB cable if you were using the K-Pod Utility 
>> app to update your pod's firmware or change its switch behavior.
>> 
>> On the other hand, with future firmware (not committing to anything, yet!) 
>> the K-Pod should be able to emulate a mouse, keyboard, or some combination 
>> of these via its USB port. So you could use it as a general-purpose input 
>> device to control software applications.
>> 
>> Wayne
>> N6KR
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to kk...@kk5na.com
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

The two are quite different, Fred. Yours has the edge on price Other major 
differences: The K-Pod connects to the K3/K3S at the RJ jack beneath the front 
panel, so it doesn't tie up the rig's RS232 or USB ports. It can optionally be 
powered through this cable. The optical/ball-bearing encoder is 400 counts and 
uses the same weighted, soft-touch knob as the K3S. A rocker switch selects VFO 
A/B/OFFSET control. Function switches F1-F8 directly trigger up to 16 macros in 
the radio. There's a USB port, 4 programmable LEDs, and 3 general-purpose 
open-drain outputs.

73,
Wayne
N6KR


On Apr 14, 2016, at 10:38 AM, Fred Jensen  wrote:

> Is the K-Pod similar to my PigKnob?
> 
> 73,
> 
> Fred K6DGW



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K-Pod hands-on test opportunity; request for K-Pod application ideas

[Wayne Burdick]

Same way for either a K3 or K3S: Plug it into the RJ jack beneath the front 
panel.

73,
Wayne
N6KR


On Apr 14, 2016, at 9:52 AM, Brian & Cyndi  wrote:

> Ok, so how do I connect a K-Pod to my K3 (pre-S)?
> 
> Brian, W6FVI




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Dauer, Edward]

Very nice addition to the lineup. Congrats to the team.

I never thought I needed such a thing; but now I see that it is absolutely
indispensable.  Of course I¹ll buy one.

Having said that, and not at all meaning to be critical or ungrateful, I¹d
like to wonder aloud why we still need cables - and the K-pod will add two
more to the unruly collection already hiding behind my desk, as I read
what¹s been printed so far.  (Do I have that part right?)  Computer
hardware manufacturers pretty much gave up on inter-unit cabling long ago,
thank goodness.  Is there a reason why RF equipment couldn¹t do the same?
Please take this as a serious question, not a complaint.  I¹d be
interested in knowing the technical challenges to making it happen.


Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[kk5na]

So, it needs the control cable, a power cable and could possibly have a 
third cable for USB?


 Joe KK5NA

On 4/14/2016 11:41 AM, Wayne Burdick wrote:

On Apr 14, 2016, at 9:33 AM, Mike Dodd  wrote:


The K-Pod datasheet says, "A USB port is provided on the K-Pod for firmware updates 
and future station control uses."

Does this mean I can connect the USB cable to my PC only when I want to upgrade 
the firmware using the K-Pod Utility?

Or must the USB be always connected?

You'd only need to connect the USB cable if you were using the K-Pod Utility 
app to update your pod's firmware or change its switch behavior.

On the other hand, with future firmware (not committing to anything, yet!) the 
K-Pod should be able to emulate a mouse, keyboard, or some combination of these 
via its USB port. So you could use it as a general-purpose input device to 
control software applications.

Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kk...@kk5na.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K-Pod vs Pigknob (was Re: [Elecraft_K3] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers)

[Nick Garner]

The K-Pod has a vastly superior encoder and knob compared to the PigKnob.
Using the same encoder as the K3 in the PigKnob wasn't economically
feasible at the low quantities I deal with.  There is a header on the board
though for enterprising individuals who want to connect the K3 encoder
(purchased from Elecraft) to the PigKnob.

Hisashi, send an email over to supp...@pignology.net if you run into issues
and I'll help you out.

73,
Nick
N3WG

On Thu, Apr 14, 2016 at 11:06 AM, Hisashi T Fujinaka 
wrote:

> That's what I thought.
>
> And as an added question, I still have to see if I can get my PigKnob to
> work with my K3 upgraded with the KIO3B + P3 with the CBLP3Y. I'd put it
> inline to the PC connection, I think.
>
> I keep forgetting to do that because I mostly used my PigKnob on CW and
> I'm busy doing JT9/JT65 lately.
>
> On Thu, 14 Apr 2016, Fred Jensen wrote:
>
> Is the K-Pod similar to my PigKnob?
>>
>> 73,
>>
>> Fred K6DGW
>> - Northern California Contest Club
>> - CU in the Cal QSO Party 1-2 Oct 2016
>> - www.cqp.org
>>
>> On 4/13/2016 8:51 PM, Dave Cole wrote:
>>
>>> What a cool accessory Wayne!  Nice work!!
>>>
>>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ht...@twofifty.com
>>
>>
> --
> Hisashi T Fujinaka - ht...@twofifty.com
> BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nwgar...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] Re: K-Pod hands-on test opportunity; request for K-Pod application ideas

[Rick WA6NHC]

So it's within the realm of possibilities that a device similar to the 
K-pod could be made using the RJ-45, with a sound card added, for full 
network access?  That would simplify remote ops or allow a tablet to 
control or even more.  If you can control the radio via that port, the 
K3/S is nearly at that point now.


Rick wa6nhc

On 4/14/2016 9:26 AM, Wayne Burdick n...@elecraft.com [Elecraft_K3] wrote:



On Apr 14, 2016, at 8:06 AM, Brendon Whateley  
wrote:


> Perhaps a silly question, or just too early?
>
> Will it be possible to repurpose this to use with other radios? It 
looks like it is designed for the K3(S) but I could see it being 
useful for my KX3, or possibly other home-brew radios? I suppose all 
that would be required would be the protocol specification so that a 
DIY micro-controller could do the translation to whatever would be needed.


In theory you could use either the RJ12 data jack or the USB port for 
this with the right firmware and interfaces. That's what we were 
alluding to ("future applications"). Keep those ideas coming!


Wayne
N6KR

__._,_.___

Posted by: Wayne Burdick 

Reply via web post 
 
	• 	Reply to sender 
 
	• 	Reply to group 
 
	• 	Start a New Topic 
 
	• 	Messages in this topic 
 
(1)


Visit Your Group 
 



  * New Members


8

Yahoo! Groups 
 

• Privacy 
 • 
Unsubscribe 
 • 
Terms of Use 


.

__,_._,___


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K-Pod vs Pigknob (was Re: [Elecraft_K3] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers)

[Hisashi T Fujinaka]

That's what I thought.

And as an added question, I still have to see if I can get my PigKnob to
work with my K3 upgraded with the KIO3B + P3 with the CBLP3Y. I'd put it
inline to the PC connection, I think.

I keep forgetting to do that because I mostly used my PigKnob on CW and
I'm busy doing JT9/JT65 lately.

On Thu, 14 Apr 2016, Fred Jensen wrote:


Is the K-Pod similar to my PigKnob?

73,

Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org

On 4/13/2016 8:51 PM, Dave Cole wrote:

What a cool accessory Wayne!  Nice work!!



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ht...@twofifty.com



--
Hisashi T Fujinaka - ht...@twofifty.com
BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Rick Miller - N1RM]

Wayne:

This looks slick.  I sometimes use my K3 to control a remote station through
RemoteRig controllers in K3 Twin mode.  If I hook this to my local
("control") K3, will it work through the RRC setup to control the remote
("radio") K3?  Given that it hooks into the front panel, it seems like it
may.

Rick - N1RM



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616340.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Carl AB1DD]

I would vote for "K Nob"
My first thought when I saw the posting for the K Pod was someone was going to 
talk about a morning breakfast drink! Of course, I'm in the Green Mountain 
State.

Carl
AB1DD




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Fred Jensen]

Is the K-Pod similar to my PigKnob?

73,

Fred K6DGW
- Northern California Contest Club
- CU in the Cal QSO Party 1-2 Oct 2016
- www.cqp.org

On 4/13/2016 8:51 PM, Dave Cole wrote:

What a cool accessory Wayne!  Nice work!!



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K-Pod hands-on test opportunity; request for K-Pod application ideas

[Brian & Cyndi]

Ok, so how do I connect a K-Pod to my K3 (pre-S)?

Brian, W6FVI

On 4/14/2016 9:26 AM, Wayne Burdick wrote:

On Apr 14, 2016, at 8:06 AM, Brendon Whateley  wrote:


Perhaps a silly question, or just too early?

Will it be possible to repurpose this to use with other radios? It looks like 
it is designed for the K3(S) but I could see it being useful for my KX3, or 
possibly other home-brew radios? I suppose all that would be required would be 
the protocol specification so that a DIY micro-controller could do the 
translation to whatever would be needed.

In theory you could use either the RJ12 data jack or the USB port for this with the right 
firmware and interfaces. That's what we were alluding to ("future 
applications"). Keep those ideas coming!

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w6...@sbcglobal.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Ken G Kopp]

K-NOB  Super name, IMO!

K0PP
On Apr 14, 2016 10:45, "Alan Bloom"  wrote:

> I was agitating to call it the "K-NOB" but got voted down.  :=)
>
> Alan N1AL
>
>
> On 04/14/2016 05:10 AM, Barry wrote:
>
>> Is this the forerunner to the K-Watch?  :-)
>>
>> Barry W2UP
>>
>>
>>
>> --
>> View this message in context:
>> http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616305.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@sonic.net
>>
>> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kengk...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K-Pod's USB Connection

[Doug Hensley]

With the demand of devices asking for a USB connection growing,

has the K-Pod been tested on a USB-Hub that is also connected to

other devices such as a Signalink USB, a keyer, a computer, etc etc

and is it smart enough to mind its own business?


Thank you,


Doug W5JV






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Alan Bloom]

I was agitating to call it the "K-NOB" but got voted down.  :=)

Alan N1AL


On 04/14/2016 05:10 AM, Barry wrote:

Is this the forerunner to the K-Watch?  :-)

Barry W2UP



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616305.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@sonic.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

On Apr 14, 2016, at 9:33 AM, Mike Dodd  wrote:

> The K-Pod datasheet says, "A USB port is provided on the K-Pod for firmware 
> updates and future station control uses."
> 
> Does this mean I can connect the USB cable to my PC only when I want to 
> upgrade the firmware using the K-Pod Utility?
> 
> Or must the USB be always connected?

You'd only need to connect the USB cable if you were using the K-Pod Utility 
app to update your pod's firmware or change its switch behavior.

On the other hand, with future firmware (not committing to anything, yet!) the 
K-Pod should be able to emulate a mouse, keyboard, or some combination of these 
via its USB port. So you could use it as a general-purpose input device to 
control software applications.

Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

On Apr 14, 2016, at 9:25 AM, W1KSZ  wrote:

> Wired accessories ?? In this day ?? I thought that went out with
> VHS Tape Decks.
> 
> I much prefer wireless, the minor inconvenience of replacing a battery
> every few months far outweighs having a cable  to deal with.
> 
> Perhaps add it to the Product Improvement Program ?

Dick,

The K-Pod uses an optical encoder with a ball-bearing drive to obtain both 
smooth, fast tuning and up to 400 counts per turn. The encoder consumes about 
30 mA, and the rest of the K-Pod another 10-20 mA. A battery large enough to 
handle this for a good length of operating time won't fit inside the pod.

73,
Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Mike Dodd]

The K-Pod datasheet says, "A USB port is provided on the K-Pod for 
firmware updates and future station control uses."


Does this mean I can connect the USB cable to my PC only when I want to 
upgrade the firmware using the K-Pod Utility?


Or must the USB be always connected?

Thanks, Wayne.

--
73, Mike N4CF
Louisa County, VA USA
Elecraft K3s/100
Carolina Windom up 45'
http://n4cf.mdodd.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] (no subject)

[Edward R Cole]

Charlie,

Makes me smile.  Some die-hard CW eme operator claim that JT65 
operators are playing bag-pipes!  Guess it goes with one's 
interpretation/experience 


73, Ed - KL7UW
HS Clarinet player

From: "Charlie T, K3ICH" 
To: 
Subject: Re: [Elecraft] KX3 Carrying Case
Message-ID: <011201d195d8$51f79670$f5e6c350$@erols.com>
Content-Type: text/plain;   charset="us-ascii"

Be very careful..Those old musical instrument cases are likely to be
haunted by the ghost of the instrument it held.
The instrument, if not current IN the case will drive you nutz if it finds
that you're using for something else.
By the way Clarinets are the absolute WORST for this phenomenon.
You'll hear those spooky tweets in the middle of the night until the two are
re-united.

73, Charlie k3ICH



73, Ed - KL7UW
http://www.kl7uw.com
"Kits made by KL7UW"
Dubus Mag business:
dubus...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K-Pod hands-on test opportunity; request for K-Pod application ideas

[Wayne Burdick]

On Apr 14, 2016, at 8:06 AM, Brendon Whateley  wrote:

> Perhaps a silly question, or just too early?
> 
> Will it be possible to repurpose this to use with other radios? It looks like 
> it is designed for the K3(S) but I could see it being useful for my KX3, or 
> possibly other home-brew radios? I suppose all that would be required would 
> be the protocol specification so that a DIY micro-controller could do the 
> translation to whatever would be needed.

In theory you could use either the RJ12 data jack or the USB port for this with 
the right firmware and interfaces. That's what we were alluding to ("future 
applications"). Keep those ideas coming!

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[W1KSZ]

Wired accessories ?? In this day ?? I thought that went out with
VHS Tape Decks.

I much prefer wireless, the minor inconvenience of replacing a battery
every few months far outweighs having a cable  to deal with.

Perhaps add it to the Product Improvement Program ?

73, Dick, W1KSZ

On 4/14/2016 9:20 AM, Wayne Burdick wrote:

On Apr 14, 2016, at 7:53 AM, William Lagerberg  wrote:


Hi Wayne,

Sound’s good to me, but with a wire connected to K3 or K3S  wasn’t there a 
possibility to make a small bluetooth module into K3 and K3S then there would’t 
have been a possibility to do it wireless…

For now, this is left as an exercise for the reader :)

Personally, I prefer the single cable from the pod to the radio, allowing the 
pod to be powered by the radio and eliminating the need for a battery or 
separate supply.

Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w1...@earthlink.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

On Apr 14, 2016, at 5:09 AM, Irwin Darack idar...@gmail.com [elecraft] 
 wrote:

> 
> 
> Wayne,
> 
> Can you use the K-Pod function keys to key the CW, RTTY & DVK SSB memories 
> stored in the K3S? 
> 
> Thanks, Irwin KD3TB 

Yes.

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

Has to be heavy to survive in K6XX's shack (Bob Wolbert, contester 
extraordinare and abuser of peripheral devices). As with a keyer paddle, you 
don't want it to move around when you use it.

Wayne
N6KR


On Apr 14, 2016, at 5:26 AM, Martin Sole  wrote:

> It looks a bit heavy!
> I'll wait for the K-Pod air!
> 
> 
> Martin, HS0ZED



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

On Apr 14, 2016, at 7:53 AM, William Lagerberg  wrote:

> Hi Wayne,
> 
> Sound’s good to me, but with a wire connected to K3 or K3S  wasn’t there a 
> possibility to make a small bluetooth module into K3 and K3S then there 
> would’t have been a possibility to do it wireless…

For now, this is left as an exercise for the reader :)  

Personally, I prefer the single cable from the pod to the radio, allowing the 
pod to be powered by the radio and eliminating the need for a battery or 
separate supply.

Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3Sand K3 Transceivers

[Wayne Burdick]

On Apr 14, 2016, at 5:21 AM, Doug Turnbull  wrote:

> Dear OM Wayne,
>  Thank you for producing a control pod!It is one accessory I have
> wanted since first purchasing a K3.   The Orion II had a more basic version
> of what you are about to produce.
> 
>   For me the most important function is the ability to access the eight
> messages stored CW and Voice memory.   No longer do I have to pose my finger
> over M2 button blocking the view of the P3 and most of the other switches.
> This was always uncomfortable.  

To do that, you'd simply use K3 Utility to set up any of macros 9-16 with the 
appropriate switch-emulation commands for the K3's M1-M4 tap/hold functions. 
These are described in the Programmer's Reference and will also be among the 
examples in the K-Pod owner's manual.

Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

mstang...@comcast.net [Elecraft_K3]  wrote:

> Wayne,
> 
> It look interesting. Can you explain the connections for data, power and 
> firmware upgrades in detail:
> 
> * USB port for firmware loading and future equipment/computer control 
> applications

There will be a "K-Pod Utility" for firmware loading. Over time it will gain 
the ability to configure the K-Pod switches, LEDs, USB port, and 
general-purpose outputs in various ways.


> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the 
> front panel
> * flexible power source: rear 12-V jack on the radio, DC barrel jack, 
> USB port, or even through the 6-pin data cable, with minor radio modification
> (the latter method results in a single cable to the K-Pod for data and power)
> 
> It would be nice to have one connection to the radio. I guess this would be 
> the 6-pin data cable.

This is the idea. There will be a mod to power the pod through the data cable. 
Details pending.


> Can I upgrade the firmware to the Pod via this connection from the RS-232 or 
> USB port on the K3/K3S?

As of now the plan is to use the USB port on the K-Pod for updating its 
firmware. 

Wayne
N6KR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Jim Finan]

Order in also. 

Now to wait until June 15th...July...Aug... ;)

interesting that the RJ-Jack question just came up again recently. Now the 
answer has changed.

Jim Finan
AB4AC

Sent from my BlackBerry 10 smartphone.
  Original Message  
From: Bill Steffey NY9H
Sent: Thursday, April 14, 2016 9:25 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and 
K3 Transceivers

ORDER IN


as they say on "hawaii 50" SHIP IT WAYNO.errr ah Danno

guess I'll have to wait till Dayton to try out my new acquisition.

bill H/3 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jimfi...@att.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K-Pod hands-on test opportunity; request for K-Pod application ideas

[Brendon Whateley]

Perhaps a silly question, or just too early?

Will it be possible to repurpose this to use with other radios? It looks
like it is designed for the K3(S) but I could see it being useful for my
KX3, or possibly other home-brew radios? I suppose all that would be
required would be the protocol specification so that a DIY micro-controller
could do the translation to whatever would be needed.

Thanks,
- Brendon
KK6AYI

On Wed, Apr 13, 2016 at 9:50 PM, Wayne Burdick  wrote:

> If you're planning to go to the Visalia DX convention this weekend (
> dxconvention.org), please drop by our booth and give the K-Pod a test
> drive.
>
> We're very interested in hearing about your potential uses for the K-Pod,
> including proposed macros (command sequences). Some of these might make
> great examples for the owner's manual. In the future, we'll also support
> general-purpose USB functionality involving additional equipment types. All
> ideas and opinions welcome.
>
> 73,
> Wayne
> N6KR
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bren...@whateley.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[William Lagerberg]

Hi Wayne,

Sound’s good to me, but with a wire connected to K3 or K3S  wasn’t there a 
possibility to make a small bluetooth module into K3 and K3S then there would’t 
have been a possibility to do it wireless…
Next to that, you probably would have the possibility to connect other devices 
to ??

I am not a programmer, so perhaps it is program technical not possible, but i 
think that would have been very nice perhaps better….

Then you can put it where you like on your desk.

My little attribute on this subject,   William PE1BSB.


> On 14 Apr 2016, at 05:04, Wayne Burdick  wrote:
> 
> Hi all,
> 
> We've had many requests for a small control panel (or pod) as an extension to 
> the K3 and K3S transceivers. We finally got around to it! 
> 
> Our new K-Pod is a very compact unit, featuring a precision tuning knob, VFO 
> A/B/offset rocker switch, and 8 programmable tactile-feedback switches. 
> Switch feedback is provided by activation messages on the radio's LCD, as 
> well as the pod's own 4 indicator LEDs and audio tone generator. This 
> multi-modal information can help maximize operating efficiency and reduce 
> fatigue during extended operating periods.
> 
> Typically the K-Pod would be placed next to a computer keyboard, allowing the 
> operator to quickly QSY, clear RIT, enter diversity mode, change menu 
> settings, etc., without that long stretch to reach the radio's front panel. 
> 
> But the K-Pod's flexible interface goes beyond substitution of the radio's 
> knobs and switches. In effect, you can design your own customized controls 
> for the radio.
> 
> Each of the 8 programmable switches has tap and hold functions. When a switch 
> function is used, it activates one of up to 16 user-defined command sequences 
> that are actually stored in the radio itself, as macros. A single macro can 
> accomplish many tasks at once, such as setting up custom splits, configuring 
> the receiver or subreceiver for specific situations, sending transmit 
> messages at differing code speeds, etc. Macros can be easily created or 
> edited using K3 Utility, which runs on PC, Mac, or Linux platforms.
> 
> The K-Pod has the following features:
> 
> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
> * adjustable knob friction
> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
> * 8 programmable function switches, each with tap/hold functions
> * simple switch programming using K3 Utility (many examples in K-Pod manual)
> * four user-definable LEDs (three of them show knob assignment by default)
> * audio tone generator for switch feedback (can be easily turned off)
> * USB port for firmware loading and future equipment/computer control 
> applications
> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the 
> front panel
> * flexible power source: rear 12-V jack on the radio, DC barrel jack, 
>  USB port, or even through the 6-pin data cable, with minor radio modification
>  (the latter method results in a single cable to the K-Pod for data and power)
> * 3 utility outputs for miscellaneous equipment control applications 
>  (outputs provide a low resistance to ground when turned on, usable with 
> relays, etc.)
> 
> The K-Pod's all-steel enclosure weighs a full pound for excellent stability, 
> yet measures only about 3.5 x 3 x 1 inches. A highly stable folding tilt 
> stand is included to angle the panel for optimal access. There's also a 
> 2-hole RAM mount pattern on the bottom for easy attachment to any surface.
> 
> For photos and further information, please visit our K-Pod web page:
> 
>  http://www.elecraft.com/k-pod/k-pod.htm
> 
> 73,
> Wayne, N6KR
> Eric, WA6HHQ
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pe1...@zendamateur.nl


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Scott Manthe]

Good job, Wayne! I'd love to see a K3S-style bezel for the K3. It's a 
small thing, but the new bezel looks a lot nicer than the K3's 
plexiglass version. I'd even pay $50... :)


73,
Scott N9AA


On 4/13/16 11:04 PM, Wayne Burdick wrote:

Hi all,

We've had many requests for a small control panel (or pod) as an extension to 
the K3 and K3S transceivers. We finally got around to it!

Our new K-Pod is a very compact unit, featuring a precision tuning knob, VFO 
A/B/offset rocker switch, and 8 programmable tactile-feedback switches. Switch 
feedback is provided by activation messages on the radio's LCD, as well as the 
pod's own 4 indicator LEDs and audio tone generator. This multi-modal 
information can help maximize operating efficiency and reduce fatigue during 
extended operating periods.

Typically the K-Pod would be placed next to a computer keyboard, allowing the 
operator to quickly QSY, clear RIT, enter diversity mode, change menu settings, 
etc., without that long stretch to reach the radio's front panel.

But the K-Pod's flexible interface goes beyond substitution of the radio's 
knobs and switches. In effect, you can design your own customized controls for 
the radio.

Each of the 8 programmable switches has tap and hold functions. When a switch 
function is used, it activates one of up to 16 user-defined command sequences 
that are actually stored in the radio itself, as macros. A single macro can 
accomplish many tasks at once, such as setting up custom splits, configuring 
the receiver or subreceiver for specific situations, sending transmit messages 
at differing code speeds, etc. Macros can be easily created or edited using K3 
Utility, which runs on PC, Mac, or Linux platforms.

The K-Pod has the following features:

* high-quality weighted, soft-touch tuning knob--same as used on the K3S
* same 400-count, ball-bearing optical encoder used in the K3 and K3S
* adjustable knob friction
* 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
* 8 programmable function switches, each with tap/hold functions
* simple switch programming using K3 Utility (many examples in K-Pod manual)
* four user-definable LEDs (three of them show knob assignment by default)
* audio tone generator for switch feedback (can be easily turned off)
* USB port for firmware loading and future equipment/computer control 
applications
* simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the 
front panel
* flexible power source: rear 12-V jack on the radio, DC barrel jack,
   USB port, or even through the 6-pin data cable, with minor radio modification
   (the latter method results in a single cable to the K-Pod for data and power)
* 3 utility outputs for miscellaneous equipment control applications
   (outputs provide a low resistance to ground when turned on, usable with 
relays, etc.)

The K-Pod's all-steel enclosure weighs a full pound for excellent stability, 
yet measures only about 3.5 x 3 x 1 inches. A highly stable folding tilt stand 
is included to angle the panel for optimal access. There's also a 2-hole RAM 
mount pattern on the bottom for easy attachment to any surface.

For photos and further information, please visit our K-Pod web page:

   http://www.elecraft.com/k-pod/k-pod.htm

73,
Wayne, N6KR
Eric, WA6HHQ







__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 Carrying Case

[KD6QZX]

look at my web page GEMS Home Page
|   |
|   |  |   |   |   |   |   |
| GEMS Home PageI am Scott AK6Q. Thissite is about my original and innovative 
SIDE KX accessories for yourElecraftKX3 radio,  the PX3 Panadaptor and now the 
K-Line!  |
|  |
| View on www.gemsproducts... | Preview by Yahoo |
|  |
|   |


 
 

On Tuesday, April 12, 2016 8:04 PM, Elecraft mailing list [via Elecraft] 
 wrote:
 

  Any recommendations on a carry case for a KX3 that would have space for 
accessories i.e. Connectors, mic etc.. Also to serve as a storage case when the 
KX3 isn't in use.

Thanks,
Tom

Sent from my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
 
 
   If you reply to this email, your message will be added to the discussion 
below: http://elecraft.365791.n2.nabble.com/KX3-Carrying-Case-tp7616271.html   
To unsubscribe from Elecraft, click here.
 NAML 





-
K3 #348 KX3 #2499
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KX3-Carrying-Case-tp7616271p7616318.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Correction Re: K3 heat problem?

[Sam Morgan]

sorry, fat fingers, I am running the K3 @ 13.8v not 12.8v

On 4/14/2016 8:47 AM, Sam Morgan wrote:
> This is after just listening, not transmitting. If I place my hand on
> the right side, near the front of my K3, (where the screw is for the
> heat sink), it's very warm. One of those infrared thermometers says 106
> degrees F. Is this normal? I am running the K3 on 12.8v
>
> TIA
--
GB & 73
K5OAI
Sam Morgan
John 3:16  Ephesians 2:8-9  1 Peter 2:24  Acts 2:38
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Elecraft Digest, Vol 144, Issue 20

[Hans J Rasmusen via Elecraft]

Cool,
Will it work with the KX3 as well?
73
OZ7BQ, Hans Jørgen


Sendt fra min iPhone

> Den 14. apr. 2016 kl. 14.26 skrev elecraft-requ...@mailman.qth.net:
> 
> Send Elecraft mailing list submissions to
>elecraft@mailman.qth.net
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
>elecraft-requ...@mailman.qth.net
> 
> You can reach the person managing the list at
>elecraft-ow...@mailman.qth.net
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
> 
> 
> Today's Topics:
> 
>   1. Re: K3s AFSK frequencies (n...@comcast.net)
>   2. Re: K3s AFSK frequencies (Ed Muns)
>   3. Re: K3s AFSK frequencies (Dave Hachadorian)
>   4. Re: AFSK-A with K3s (Mike Dodd)
>   5. Re: AFSK-A with K3s (Wes)
>   6. Re: AFSK-A with K3s (Wes)
>   7. Re: K3s AFSK frequencies (Ed Muns)
>   8. Re: KX3 Carrying Case (Chris Del Plato KQ2RP)
>   9. Re: AFSK-A with K3s (Mike Dodd)
>  10. Re: KX3 Carrying Case (Jock Irvine)
>  11. Re: KX3 Carrying Case (Bill Frantz)
>  12. Re: KX3 Carrying Case (Charlie T, K3ICH)
>  13. Re: KX3 Carrying Case (Walter Underwood)
>  14. KX-1 Paddle (KXPD1) (Scott Ellington)
>  15. New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (Wayne Burdick)
>  16. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (M Cresap)
>  17. Re: New Elecraft Product: K-Pod Control Panel for K3Sand K3
>  Transceivers (Wayne Burdick)
>  18. Re: [Elecraft_K3] New Elecraft Product: K-Pod Control Panel
>  for K3S and K3 Transceivers (Dave Cole)
>  19. Re: [Elecraft_K3] New Elecraft Product: K-Pod ControlPanel
>  for K3S and K3 Transceivers (Wayne Burdick)
>  20. K-Pod hands-on test opportunity;request for K-Pod
>  application ideas (Wayne Burdick)
>  21. Re: [Elecraft_K3] New Elecraft Product: K-Pod ControlPanel
>  for K3S and K3 Transceivers (Gary)
>  22. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (Bill)
>  23. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (Arie Kleingeld PA3A)
>  24. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (Irwin Darack)
>  25. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (Barry)
>  26. Re: New Elecraft Product: K-Pod Control Panel for K3SandK3
>  Transceivers (Doug Turnbull)
>  27. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
>  Transceivers (Martin Sole)
> 
> 
> --
> 
> Message: 1
> Date: Wed, 13 Apr 2016 15:58:28 + (UTC)
> From: n...@comcast.net
> To: j...@kk9a.com
> Cc: elecraft 
> Subject: Re: [Elecraft] K3s AFSK frequencies
> Message-ID:
><1267124641.8946069.1460563108394.javamail.zim...@comcast.net>
> Content-Type: text/plain; charset=utf-8
> 
> I have had really good luck using the 500hz roofing filter and adjusting down 
> to 400Hz with DSP for rag chewing. In contests I will adjust to 350 or even 
> 300Hz, depending on how close signals get bunched together, with very good 
> decode. 
> I've also made adjustments to AGC, which have also been an improvement. AGC 
> DCY - soft, AGC SLP - 6, AGC THR - 16. All other AGC settings at default. 
> These settings in my location, seem to work the best for me so far. 
> ? 
> Gene, N9TF 
> K3S 10057 
> 
> - Original Message -
> 
> From: j...@kk9a.com 
> To: "elecraft"  
> Sent: Wednesday, April 13, 2016 8:56:06 AM 
> Subject: Re: [Elecraft] K3s AFSK frequencies 
> 
> The optimal band width may depend on how crowded the band is. Wide 
> filtering may work well for a DXer trying to copy a super weak signal on a 
> quiet band. I only use RTTY in contests when the bands are packed and I 
> have had great results using very narrow roofing filters. 
> 
> John KK9A 
> 
> 
> from: Dave Hachadorian 
> Tue Apr 12 23:54:57 EDT 2016 
> 
> Current thinking is to use a fairly wide filter for RTTY. ?The 
> software filters that are applied in the sound card are much 
> narrower, about 50 Hz wide. ?Lately I've been using the 2.7 KHz 
> roofing filter, with DSP bandwidth set to about 600 Hz. 
> 
> 
> Dave Hachadorian, K6LL 
> Yuma, AZ 
> 
> __ 
> Elecraft mailing list 
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> Help: http://mailman.qth.net/mmfaq.htm 
> Post: mailto:Elecraft@mailman.qth.net 
> 
> This list hosted by: http://www.qsl.net 
> Please help support this email list: http://www.qsl.net/donate.html 
> Message delivered to n...@comcast.net 
> 
> 
> 
> --
> 
> Message: 2
> Date: Wed, 13 Apr 2016 09:05:40 -0700
> From: "Ed Muns" 
> To: "'Mike Dodd'" 
> 

[Elecraft] Additional Macros in Spread sheet for K3/P3

[Dave Cole]

Hello,

For those of you that are doing macros, I have updated the macro spread
sheet with four more new macros, they are:

QRP PWR Sets to 2 Watts
DIG PWR Sets to 25 Watts
CAL Sends your call sign in CW
RPT Sends 5NN TU in CW
VFO A/B Toggles between VFOs A and B

Additionally, I have added explanations of what each of the 30 some odd
macros do.

This was intended for those of you that have a Genovation Keypad, but
the Macros will work with or without the Genovation, so the spread
sheet is good for those that have not done the Genovation thing as
well...

See:

http://nk7z.net/adding-an-external-keypad-to-the-k3/

About half way down in the section titled "A few hints", you will find
a link to the spread sheet.

-- 
73's, and thanks,
Dave (NK7Z)

For software/hardware reviews see:
http://www.nk7z.net

For MixW support see:
https://groups.yahoo.com/neo/groups/mixw/info

For SSTV help see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K3 heat problem?

[Sam Morgan]

This is after just listening, not transmitting. If I place my hand on 
the right side, near the front of my K3, (where the screw is for the 
heat sink), it's very warm. One of those infrared thermometers says 106 
degrees F. Is this normal? I am running the K3 on 12.8v


TIA
--
GB & 73
K5OAI
Sam Morgan
John 3:16  Ephesians 2:8-9  1 Peter 2:24  Acts 2:38
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Bill Steffey NY9H]

ORDER IN


as they say on "hawaii 50" SHIP IT WAYNO.errr   ah Danno

guess I'll have to wait till Dayton to try out my new acquisition.

bill  H/3 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Robert Nobis]

Fantastic. I have been waiting for something like this. I pre-ordered the 
morning.

73,


Bob Nobis - N7RJN
n7...@nobis.net


> 
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n7...@nobis.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] AFSK-A with K3s

[Gary Smith]

Mike,

This was a very timely thread for me in 
that I have been trying to get MMTTY 
working with the K3s and missed any 
contacts with the FT4 on RTTY and only 
made a RTTY Q with the VK0 because I used 
the memories in the K3s to send RTTY via 
FSK, not MMTTY. In fact, what I was 
transmitting was just a key down and not 
the RTTY I thought I was putting out and I 
was inadvertently QRMing every time I 
transmitted.

I asked on the MMTTY yahoo group about how 
to sync the K3s properly and a very 
helpful ham from VK finally helped me 
figure out what I was doing wrong.

The info in this thread is also very 
helpful. I did find that for some reason 
when I would select AFSK A, it was still 
set at FSK D and I must not have properly 
saved the AFSK setting. Now I have it 
correctly set and its working beautifully.

I am so satisfied with the K3s, it is just 
a magnificent piece of electronics and 
makes my day better.

73,

Gary
KA1J
> OK, I think I have it straight now. Thanks to all, and especially to 
> Gene, N9TF who emailed me off-list.
> 
> For the benefit of all, here is what I learned today:
> 
> I _do_ need to turn on VOX if I want to use a logging program that grabs 
> the USB control port (COM5 in my case). I had MMTTY set up to key the 
> rig on COM5, but it occurred to me that I didn't have my logging 
> software open at that time. So PTT via COM5 is out, VOX is in.
> 
> I don't normally use VOX, so my MENU: VOX gain was set to 0. Once I 
> turned it up to 8 or higher, the MMTTY tones keyed the rig just fine.
> 
> MENU: MIC SEL is automatically set to LINE IN when data mode AFSK-A is 
> selected. This automatically reverts to my normal FP mic selection when 
> I switch back to a voice mode.
> 
> The mic gain must be set for 5 bars on the ALC meter. On my K3s, this is 
> a MIC setting of only 2, and the fifth bar doesn't flicker as it does 
> with voice, because a steady tone is being transmitted.
> 
> The MIC gain control sets the LINE IN gain. This automatically reverts 
> to my normal mic gain when I switch back to a voice mode.
> 
> How convenient is that! THANK YOU, Elecraft.
> 
> Bottom line (on my K3s, at least):
> 
> * DATA MD = AFSK-A
> * VOX on
> * MENU: VOX GN = 8 - 10
> * MENU: MIC SEL = LINE IN (automatic with AFSK-A)
> * MIC gain = 2
> * PITCH = Mark frequency and shift to match those set in MMTTY
> 
> MMTTY:
> * Setup, Sound card = USB audio CODEC
> * Setup, Misc device identifiers = RX 0, TX 1 (TX 0 is the PC's speakers)
> * Setup, TX, radio command, port = NONE if using logging software that 
> needs the COM port
> 
> I think that about covers it. Thanks again to all who offered suggestions.
> 
> -- 
> 73, Mike N4CF
> Louisa County, VA USA
> Elecraft K3s/100
> Carolina Windom up 45'
> http://n4cf.mdodd.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to g...@ka1j.com
> 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Martin Sole]

It looks a bit heavy!
I'll wait for the K-Pod air!


Martin, HS0ZED


On 14/04/2016 15:10, Barry wrote:

Is this the forerunner to the K-Watch?  :-)

Barry W2UP



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616305.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hs0...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3Sand K3 Transceivers

[Doug Turnbull]

Dear OM Wayne,
  Thank you for producing a control pod!It is one accessory I have
wanted since first purchasing a K3.   The Orion II had a more basic version
of what you are about to produce.

   For me the most important function is the ability to access the eight
messages stored CW and Voice memory.   No longer do I have to pose my finger
over M2 button blocking the view of the P3 and most of the other switches.
This was always uncomfortable.As my aunt use to say you are a brick;
this is a complement.

   Some people may now sit back in their Lazy-Boy reclining chairs
listening to the mail.   Life is good and Elecraft is dedicating itself to
real improvements in its product line.   I do not need a K4; Elecraft meets
all my needs as is.Mucho gracias my friends in Elecraft.   Plan for a
good production run; I am ordering two.  Life is good!

&3 Doug EI2CN


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Burdick
Sent: 14 April 2016 03:35
To: M Cresap
Cc: Elecraft Reflector
Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3Sand
K3 Transceivers

Short answer: yes. We have a bit more firmware to write, but this is the
plan. 

Wayne
N6KR


http://www.elecraft.com

> On Apr 13, 2016, at 8:21 PM, M Cresap  wrote:
> 
> Hi Wayne
> 
> Will the K-pod work with the K3-0?
> 
> 73, Mike, W3IP
> 
> 
> From: Wayne Burdick 
> To: Elecraft Reflector  
> Cc: "elecraft...@yahoogroups.com" ;
"elecr...@yahoogroups.com" 
> Sent: Wednesday, April 13, 2016 11:04 PM
> Subject: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and
K3  Transceivers
> 
> Hi all,
> 
> We've had many requests for a small control panel (or pod) as an extension
to the K3 and K3S transceivers. We finally got around to it! 
> 
> Our new K-Pod is a very compact unit, featuring a precision tuning knob,
VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches.
Switch feedback is provided by activation messages on the radio's LCD, as
well as the pod's own 4 indicator LEDs and audio tone generator. This
multi-modal information can help maximize operating efficiency and reduce
fatigue during extended operating periods.
> 
> Typically the K-Pod would be placed next to a computer keyboard, allowing
the operator to quickly QSY, clear RIT, enter diversity mode, change menu
settings, etc., without that long stretch to reach the radio's front panel. 
> 
> But the K-Pod's flexible interface goes beyond substitution of the radio's
knobs and switches. In effect, you can design your own customized controls
for the radio.
> 
> Each of the 8 programmable switches has tap and hold functions. When a
switch function is used, it activates one of up to 16 user-defined command
sequences that are actually stored in the radio itself, as macros. A single
macro can accomplish many tasks at once, such as setting up custom splits,
configuring the receiver or subreceiver for specific situations, sending
transmit messages at differing code speeds, etc. Macros can be easily
created or edited using K3 Utility, which runs on PC, Mac, or Linux
platforms.
> 
> The K-Pod has the following features:
> 
> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
> * adjustable knob friction
> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
> * 8 programmable function switches, each with tap/hold functions
> * simple switch programming using K3 Utility (many examples in K-Pod
manual)
> * four user-definable LEDs (three of them show knob assignment by default)
> * audio tone generator for switch feedback (can be easily turned off)
> * USB port for firmware loading and future equipment/computer control
applications
> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the
front panel
> * flexible power source: rear 12-V jack on the radio, DC barrel jack, 
>   USB port, or even through the 6-pin data cable, with minor radio
modification
>   (the latter method results in a single cable to the K-Pod for data and
power)
> * 3 utility outputs for miscellaneous equipment control applications 
>   (outputs provide a low resistance to ground when turned on, usable with
relays, etc.)
> 
> The K-Pod's all-steel enclosure weighs a full pound for excellent
stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable
folding tilt stand is included to angle the panel for optimal access.
There's also a 2-hole RAM mount pattern on the bottom for easy attachment to
any surface.
> 
> For photos and further information, please visit our K-Pod web page:
> 
>   http://www.elecraft.com/k-pod/k-pod.htm
> 
> 73,
> Wayne, N6KR
> Eric, WA6HHQ
> 
> 
> 
> 
> 

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Barry]

Is this the forerunner to the K-Watch?  :-)

Barry W2UP



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616305.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Irwin Darack]

Wayne,

Can you use the K-Pod function keys to key the CW, RTTY & DVK SSB memories
stored in the K3S?

Thanks, Irwin KD3TB

On Wednesday, April 13, 2016, Wayne Burdick  wrote:

> Hi all,
>
> We've had many requests for a small control panel (or pod) as an extension
> to the K3 and K3S transceivers. We finally got around to it!
>
> Our new K-Pod is a very compact unit, featuring a precision tuning knob,
> VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches.
> Switch feedback is provided by activation messages on the radio's LCD, as
> well as the pod's own 4 indicator LEDs and audio tone generator. This
> multi-modal information can help maximize operating efficiency and reduce
> fatigue during extended operating periods.
>
> Typically the K-Pod would be placed next to a computer keyboard, allowing
> the operator to quickly QSY, clear RIT, enter diversity mode, change menu
> settings, etc., without that long stretch to reach the radio's front panel.
>
> But the K-Pod's flexible interface goes beyond substitution of the radio's
> knobs and switches. In effect, you can design your own customized controls
> for the radio.
>
> Each of the 8 programmable switches has tap and hold functions. When a
> switch function is used, it activates one of up to 16 user-defined command
> sequences that are actually stored in the radio itself, as macros. A single
> macro can accomplish many tasks at once, such as setting up custom splits,
> configuring the receiver or subreceiver for specific situations, sending
> transmit messages at differing code speeds, etc. Macros can be easily
> created or edited using K3 Utility, which runs on PC, Mac, or Linux
> platforms.
>
> The K-Pod has the following features:
>
> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
> * adjustable knob friction
> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
> * 8 programmable function switches, each with tap/hold functions
> * simple switch programming using K3 Utility (many examples in K-Pod
> manual)
> * four user-definable LEDs (three of them show knob assignment by default)
> * audio tone generator for switch feedback (can be easily turned off)
> * USB port for firmware loading and future equipment/computer control
> applications
> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the
> front panel
> * flexible power source: rear 12-V jack on the radio, DC barrel jack,
>   USB port, or even through the 6-pin data cable, with minor radio
> modification
>   (the latter method results in a single cable to the K-Pod for data and
> power)
> * 3 utility outputs for miscellaneous equipment control applications
>   (outputs provide a low resistance to ground when turned on, usable with
> relays, etc.)
>
> The K-Pod's all-steel enclosure weighs a full pound for excellent
> stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable
> folding tilt stand is included to angle the panel for optimal access.
> There's also a 2-hole RAM mount pattern on the bottom for easy attachment
> to any surface.
>
> For photos and further information, please visit our K-Pod web page:
>
>   http://www.elecraft.com/k-pod/k-pod.htm
>
> 73,
> Wayne, N6KR
> Eric, WA6HHQ
>
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net 
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to idar...@gmail.com 
>


-- 
Irwin KD3TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Arie Kleingeld PA3A]

K-pod:

Interesting feature. Could be the first part to connect to the K4.

73
Arie PA3A

---
Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
https://www.avast.com/antivirus

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Bill]

This is right up there with sliced bread. Gets control of the K3 to the 
edge of the desk - no longer have to reach across the desk.


Come on June 15th!!!

Bill W2BLC K-Line


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com