Re: [Elecraft] K3 Remote Power On/Off
Doesn't the K3 automatically save settings every so often via a timer? So it would only revert to an earlier state if the power fails 'shortly' after making a change. Vic 4X6GP > On 1 Jun 2016, at 3:41 AM, Jim Brownwrote: > >> On Tue,5/31/2016 4:22 AM, j...@kk9a.com wrote: >> How do you save the current settings? I think most of us at some point in >> our lives have had a power failure while operating. > > Turn the K3 off with its power switch and turn it back on. You will, of > course, have to do that each time you change settings. :) > > 73, Jim > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k2vco@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Remote Power On/Off
I used to just cut power,, but the K3 really didnt like that but I got away with it always turn off before cutting power Bob K3DJC On Tue, 31 May 2016 22:37:02 -0400 Don Wilhelmwrites: > The K3 (K3S) can also be turned off safely (and store the current > settings) by using the PS0 command - see the Programmer's > Reference. > That command cannot be used to turn it on (there is no power to the > K3), > so the POWER_ON pin in the ACC connector can be pulled low by an > external device. > > If you simply pull power, the current settings will not be saved, > and > could result in having to reload the firmware to get it going > again. > > 73, > Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Remote Power On/Off
I forgot to add that if you permanently connect the ACC POWER_ON pin to ground, you will not be able to turn the K3 off with the PS0 command. It may glitch to a power off state, but will come back on almost immediately. 73, Don W3FPR -- The K3 (K3S) can also be turned off safely (and store the current settings) by using the PS0 command - see the Programmer's Reference. That command cannot be used to turn it on (there is no power to the K3), so the POWER_ON pin in the ACC connector can be pulled low by an external device. If you simply pull power, the current settings will not be saved, and could result in having to reload the firmware to get it going again. 73, Don W3FPR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Remote Power On/Off
On Tue,5/31/2016 7:09 PM, j...@kk9a.com wrote: I ask this because during my second contest ever with my new K3S and I had two power failures. So it goes back to the state that it was in when last properly shut off - That works for me! I run all the 12V gear in my shack from batteries, so the only time my K3 loses power is when I do something dumb. 73, Jim __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Remote Power On/Off
The K3 (K3S) can also be turned off safely (and store the current settings) by using the PS0 command - see the Programmer's Reference. That command cannot be used to turn it on (there is no power to the K3), so the POWER_ON pin in the ACC connector can be pulled low by an external device. If you simply pull power, the current settings will not be saved, and could result in having to reload the firmware to get it going again. 73, Don W3FPR On 5/31/2016 8:41 PM, Jim Brown wrote: On Tue,5/31/2016 4:22 AM, j...@kk9a.com wrote: How do you save the current settings? I think most of us at some point in our lives have had a power failure while operating. Turn the K3 off with its power switch and turn it back on. You will, of course, have to do that each time you change settings. :) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Remote Power On/Off
I ask this because during my second contest ever with my new K3S and I had two power failures. So it goes back to the state that it was in when last properly shut off - That works for me! John KK9A Jim Brown jim at audiosystemsgroup.com Tue May 31 20:41:39 EDT 2016 ] On Tue,5/31/2016 4:22 AM, john at kk9a.com wrote: > How do you save the current settings? I think most of us at some point in > our lives have had a power failure while operating. Turn the K3 off with its power switch and turn it back on. You will, of course, have to do that each time you change settings. :) 73, Jim __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Seeking more field testers for the new KX2 firmware release
Hi all, We could use a few more current KX2 owners to load the new code. Have to make sure I haven't fixed what wasn't broken. To load firmware, you'll need to install KX2 Utility on a PC, Mac, etc. Please contact me off-list. tnx Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Remote Power On/Off
On Tue,5/31/2016 4:22 AM, j...@kk9a.com wrote: How do you save the current settings? I think most of us at some point in our lives have had a power failure while operating. Turn the K3 off with its power switch and turn it back on. You will, of course, have to do that each time you change settings. :) 73, Jim __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Mount Bracket
Same here. It works quite well and has rear hole centers for the AMPS pattern (ball-mount). 73, matt W6NIA On 5/31/2016 5:29 PM, WD4SDC wrote: Larry, I used this to do a KX3 dash mount, but it may also work using a pole mount: http://www.gpscity.com/ram-mount-plastic-universal-finger-grip-clamping-cradle.html It "finger grips" the radio. I've had it in an out of the car on almost a daily basis (because I can't be without my KX3 ;) ) and it has worked great! 73's Steve WD4SDC. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Mount-Bracket-tp7618297p7618306.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to mzil...@roadrunner.com -- Always store beer in a dark place. - R. Heinlein __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
I use the aux out on my SignaLink USB to go to my powered speakers. I can hear simultaneously what I'm decoding using the built in sound card. I found this is the easiest to do and requires nothing other than invoking the digital software I use, no cable changes. Yes, you can use a "splitter" and amplified speakers to connect both the sound card and headphones while maintaining separate audio levels but that should not be necessary. Similarly, one can connect the microphone to the computer (sound card) and use the sound card's mute/select switches and analog monitor (if available) to switch between mic and line sources but again it should not be necessary. 73, ... Joe, W4TV On 5/31/2016 3:26 PM, Barry LaZar wrote: Joe, I use the aux out on my SignaLink USB to go to my powered speakers. I can hear simultaneously what I'm decoding using the built in sound card. I found this is the easiest to do and requires nothing other than invoking the digital software I use, no cable changes. There is one exception, the mic input is used for input from the SignaLink. This very same path is used for non-digital modes. If I go voice contesting I can switch over to my Heil Pro headset with mic and use a foot switch. I would do the same whether I used a KX2, KX3, or K3. In fact, I did the same when I used my Orion II. I use my KX3 for contesting, both as a base with the matching KXPA100 or QRP on Field Day. I find that the radio is as competitive and as any radio used for SOAB; the limitations in my scoring is operator and not radio. My experience in contesting, seriously, is not the KX3, but some of the really poor signals and poor operation of the other stations. For instance, the key clicks from Yeasu rigs are a real pain if the station is strong. And, our local power company is the other limitation. 73, Barry K3NDM -- Original Message -- From: "Joe Subich, W4TV"To: elecraft@mailman.qth.net Sent: 5/31/2016 2:41:28 PM Subject: Re: [Elecraft] KX-3 If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. Unfortunately, since the KX3 (and KX2) lack dedicated Line In/Ln Out jacks, interfacing headphones and a mic at the same time as a sound card for DVK and/or RTTY/PSK is nearly impossible. That significantly limits the suitability of the KX3 (and KX2) as a serious contest rig even if one discounts the 20 dB *higher* transmit phase noise of the KX3 (comparison of composite noise test data of K3/100 [Feb 2009 > 1 KHz.] vs. KX3 [Dec 2012]) or nearly double the keying bandwidth at 60 WPM of the KX3 vs. K3 (same two product reviews). The K3 is cleaner at 1 KW than the barefoot KX3. 73, ... Joe, W4TV On 5/31/2016 11:58 AM, Mike Dodd wrote: On 5/31/2016 11:40 AM, Mike Kasrich wrote: Has anyone put together a KX-3 kit. Is any more or less involved that putting together a K-3? I assembled both. The K3 is more involved than the KX3, but both were straightforward. The instructions and parts lists are top-notch for both rigs. Anyone use a KX-3 in a contest and interfaced with N1MM+? Any quirks/tips? Yes to both. Both play very well with N1MM+. I haven't noticed any quirks. On SSB contests with non-variable exchanges (i.e., no serial number), I recorded messages in the KX3's two DVR memories. This allowed me to operate in one mode (e.g., S or run), but I needed more DVR memories to record messages for the opposite mode. The K3s has more DVR memories, so I expect to be able to use four of them. I did NOT record .wav files and play them through the rig for total voice automation. I don't like the typical pause between spoken letters and numerals. W1AW FIVE NINE NUMBERTHREESEVENTWO If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. My KX3 currently is in storage, and is not for sale. Hope this helps. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k3...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Mount Bracket
Larry I will have one that works great in just a few weeks. look at some posting on my web site. GEMS Home Page | | | | | | | | | | | GEMS Home PageI am Scott AK6Q. | | | | View on www.gemsproducts... | Preview by Yahoo | | | | | Scott AK6Q On Tuesday, May 31, 2016 2:31 PM, Larry D. Warner [via Elecraft]wrote: Does anyone have a good mounting bracket for the KX3? I want to mount it to a pole in my 2006 Expedition so need a bracket from the KX3 to the pole. I don't have the pole yet so if you have a pole you like, please tell me what that is as well. Regards, Larry KG7ZSB You cannot live a perfect day without doing something for someone who will never be able to repay you. -- John Wooden __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [hidden email] If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/KX3-Mount-Bracket-tp7618297.html To unsubscribe from Elecraft, click here. NAML - K3 #348 KX3 #2499 -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Mount-Bracket-tp7618297p7618307.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
> We looked at this in independent reviews and our in-house plots. The > keying BW looks pretty much the same on all three rigs. The 100 W K3 > may be a tiny bit better, but there's nowhere near "twice" the > difference. While the graphs in QST are not the best in the world, I'm comparing the K3 and KX3 at -60 dB. At that level the "outside" of the K3 is, at most +/- 300 Hz while the KX3 is at least +/- 500 Hz. In any case, the published composite noise level of the K3 - even with the original synthesizer - is equal to the KX3 at 2 KHz while it is in some cases as much as 25 dB better in the 10 - 100 KHz range. While it might not be an issue at 10 - 15 Watts, that's a whole lot of phase noise when run into the KX3 into a KXPA100 to drive a "full gallon". 73, ... Joe, W4TV On 5/31/2016 4:12 PM, Wayne Burdick wrote: Joe, The KX3, KX2, and K3/K3S should have virtually the same keying bandwidth. They all use the same raised-cosine keying envelope shape, and this is by far the dominant factor unless the transmit final amplifier is being overdriven. We looked at this in independent reviews and our in-house plots. The keying BW looks pretty much the same on all three rigs. The 100 W K3 may be a tiny bit better, but there's nowhere near "twice" the difference. The K3S (or K3 with KSYN3A upgrade) does have the edge in composite, wide-band transmit phase noise. RMDR for the K3S (or K3+KSYNA) is roughly the same. Wayne __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 Mount Bracket
Larry, I used this to do a KX3 dash mount, but it may also work using a pole mount: http://www.gpscity.com/ram-mount-plastic-universal-finger-grip-clamping-cradle.html It "finger grips" the radio. I've had it in an out of the car on almost a daily basis (because I can't be without my KX3 ;) ) and it has worked great! 73's Steve WD4SDC. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Mount-Bracket-tp7618297p7618306.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 and Microham Digikeyer 2 and N1MM
I am setting up my K3 with N1MM, so far I have the K3 transmitting and receiving on RTTY, using the Microham. But my problem is The router and N1mm are not seeing the K3 to report the frequency etc. Can someone please let me know what settings in the router and N1MM will ensure that they talk to each other. Or just the settings in N1MM that will allow it to talk to the K3. Thanks Ross ZL1WN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Using MARS M110A with K3 + Microkeyer?
Have you configured the K3 for DATA A, MENU:MIC SEL=LINE IN and set up audio levels in microKEYER and your sound card as documented in "Setting Audio Levels" in the MK Users Manual? I have no experience with M110A but MK and the K3 should operate the same way for any audio based data mode. I know the audio set-up instructions work just fine for AFSK, PSK31/63/125, JT65/JT9, MFSK, DominoEX, Contestia, Olivia, etc. 73, ... Joe, W4TV On 5/31/2016 3:50 PM, Nathern Priddy via Elecraft wrote: Has anyone been able to get the MARS soundcard mode M110A working with their K3 and an original microKeyer? I tried to get the program working using DATA A, but I get almost no output power. With the K3 set to 50 watts, I get maybe 5 watts output as monitored with a Bird wattmeter. M110A is a wideband mode that is not allowed on the ham bands, but is widely used within MARS for digital traffic. M110A works great with my old TS-2000 and a homebrew, passive soundcard interface. Barry Priddy - K5VIP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod order status
what he said. Bob W3DK > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Tony > G6GLP > Sent: Tuesday, May 31, 2016 5:07 PM > To: elecraft@mailman.qth.net > Subject: [Elecraft] K-Pod order status > > Hi All, > > With all this talk about the KX2 and its order status the mention of the K-POD > seems to have lost focus in the list here. I hope the KX2 status will or is not > having an impact on the delivery status of the K-POD. The info I have is it will > start shipping around 13 June a short two weeks away. > > Due to postal delays etc I am wondering if it will be possible to collect it from > the Elecraft stand in FHN. Also will other items be available on the Stand, as last > year there was nothing for sale as I remember. > > > 73 de Tony G6GL:P > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to bob.no...@verizon.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
This is near the top of the firmware list for both radios. Wayne On May 31, 2016, at 4:47 PM, thelastdbwrote: > I'll second this request. > Myron WVØHPrinted on Recycled Data Original message From: > John Oppenheimer Date: 5/31/2016 2:15 PM (GMT-06:00) To: > elecraft@mailman.qth.net Subject: Re: [Elecraft] Suggested KX3 "upgrade" > My general operating style is to use a CW memory REPEAT for sending CQ, > both at home and during field operations. > > I sure would be nice to end the memory with a tap of the key and not > send an element. Both my new KX2 and KX3. > > John KN5L > > On 05/30/2016 06:27 PM, Jim Rodenkirch wrote: >> Could sumpin' be done, firmware wise, to let us hit the the key without >> sending the dit or dah? > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to thelas...@gmail.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
I'll second this request. Myron WVØHPrinted on Recycled Data Original message From: John OppenheimerDate: 5/31/2016 2:15 PM (GMT-06:00) To: elecraft@mailman.qth.net Subject: Re: [Elecraft] Suggested KX3 "upgrade" My general operating style is to use a CW memory REPEAT for sending CQ, both at home and during field operations. I sure would be nice to end the memory with a tap of the key and not send an element. Both my new KX2 and KX3. John KN5L On 05/30/2016 06:27 PM, Jim Rodenkirch wrote: > Could sumpin' be done, firmware wise, to let us hit the the key without > sending the dit or dah? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to thelas...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2/CO to UK Wire-n-Tree, 10W-17m SSB! (SFI=86 Spots=58)
Took a new ham & friend (who’s interested in learn code and using it in the filed) up Mt Herman this morning to experience his first SOTA activation! We were on 17/20m SSB. Stellar morning sunny 60s with a few white puffy clouds. I set up the KX2 on 17m, thru a wire up a tree and took the first shift ...then halted the pile and said "standby for a change of operators" Eric/W0RLY took over ...he was in the hot seat working over a dozen stations coast to coast in just minutes! Of course he couldn’t stop grinning the whole time! (Photo of log page is only half of his QSOs!) He did great!! Suddenly we hear a big roar of (5)-F16s (Thunderbirds) buzzing the mountain actually flying below us as they practiced for AFA graduation ceremony coming soon. (Red circle in center of the enlarged pic!) Then my MH3 mic developed a intermittent open-short so it was good to have my tiny back up mic! The little cell phone mic recently converted worked excellent! (also had KX2’s internal mic but prefer the "PTT" mic) ...Busy day! Grand finale! ...I then work SOTA friend in UK -- Phil/G4OBK in PICKERING England Wow! ...he was using 150w to a 3-el yagi to my little KX2 using a 29' wire in tree @ 25' w/10w SSB!!! Woohoo! ...made my day! Who says the bands are dead!? Steve/wGOAT Sound file of Phil (rough QRM!): https://soundcloud.com/goathiker/g4obk Photos: https://flic.kr/s/aHskAMQb5N __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 Mount Bracket
Does anyone have a good mounting bracket for the KX3? I want to mount it to a pole in my 2006 Expedition so need a bracket from the KX3 to the pole. I don't have the pole yet so if you have a pole you like, please tell me what that is as well. Regards, Larry KG7ZSB You cannot live a perfect day without doing something for someone who will never be able to repay you. -- John Wooden __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-Pod order status
Hi All, With all this talk about the KX2 and its order status the mention of the K-POD seems to have lost focus in the list here. I hope the KX2 status will or is not having an impact on the delivery status of the K-POD. The info I have is it will start shipping around 13 June a short two weeks away. Due to postal delays etc I am wondering if it will be possible to collect it from the Elecraft stand in FHN. Also will other items be available on the Stand, as last year there was nothing for sale as I remember. 73 de Tony G6GL:P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 & Loop Antennas
-Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of TFJM via Elecraft Sent: 30 May 2016 23:39 To: elecraft@mailman.qth.net Subject: [Elecraft] KX3 & Loop Antennas Has anyone had much success using either an Alex Loop or Chameleon P Loop antenna with their KX3? I have few antenna options in an apartment situation and throwing a 25 foot long wire into a nearby tree has not worked for me. Even tried loading up a 33 foot long aluminum balcony railing with no luck. Thanks, Tom W1PDI -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-Loop-Antennas-tp7618249.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to turnb...@net1.ie __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] KX2 accessibility improvements ready for review/test
This is on the wish-list. tnx Wayne N6KR On May 31, 2016, at 1:06 PM, Scott Dupuiewrote: > Wayne, > > Have you ever considered implementing an audible SWR indicator (lower tones > better SSR, higher tones worse SWR, or something like that)? I would find > this very handy for adjusting my AlexLoop in the field. Often times I cannot > easily see the KX3’s display from the antenna location while I’m adjusting > for resonance. > > Scott > AK5SD > >> On May 31, 2016, at 2:56 PM, Wayne Burdick n...@elecraft.com [KX3] >> wrote: >> >> We just completed the first phase of accessibility improvements for the KX2. >> The CW audio-tone interface now covers all front panel switches and knobs >> (except frequency memory store/recall), bringing the KX2 up to the same >> level as the KX3. Menu and frequency memory accessibility is also planned, >> but this is a complex upgrade and we can't put a date on it yet. >> >> If you have a KX2 and would like to try the new field-test firmware, or if >> you'd just like to review the KX2 Accessibility documentation, please >> contact me directly. >> >> 73, >> Wayne >> N6KR >> >> >> __._,_.___ >> Posted by: Wayne Burdick >> Reply via web post • Reply to sender • Reply to group >> • Start a New Topic • Messages in this topic (1) >> >> Have you tried the highest rated email app? >> With 4.5 stars in iTunes, the Yahoo Mail app is the highest rated email app >> on the market. What are you waiting for? Now you can access all your inboxes >> (Gmail, Outlook, AOL and more) in one place. Never delete an email again >> with 1000GB of free cloud storage. >> VISIT YOUR GROUP New Members 112 New Photos 1 >> • Privacy • Unsubscribe • Terms of Use >> >> . >> >> >> __,_._,___ > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Shipping Status requests on KX2 [corrected subj line]
Hi everyone, Its been a busy last couple of weeks at Elecraft! We are still recovering from Dayton and are working on entering all of the latest KX2 web orders . At the moment we are overloaded by all the email requests for KX2 order status (some just a couple of days after order.) This in turn is delaying our entry of the remaining KX2 orders. If at all possible, please hold off another week asking for order status unless its absolute necessary. That will help us get your KX2 out as quickly as possible. We will keep updating the status page with more detailed info as we have it. See: http://www.elecraft.com/elecraft_shipping_status.htm 73, Eric /elecraft.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
Joe, The KX3, KX2, and K3/K3S should have virtually the same keying bandwidth. They all use the same raised-cosine keying envelope shape, and this is by far the dominant factor unless the transmit final amplifier is being overdriven. We looked at this in independent reviews and our in-house plots. The keying BW looks pretty much the same on all three rigs. The 100 W K3 may be a tiny bit better, but there's nowhere near "twice" the difference. The K3S (or K3 with KSYN3A upgrade) does have the edge in composite, wide-band transmit phase noise. RMDR for the K3S (or K3+KSYNA) is roughly the same. Wayne __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Can't get KXPA100 to turn on when PX3 is attached after SOTA trip.
Hi Terry I never saw anyone answer your question and I just got home from work so I could not do it earlier. I just took my KX3, PX3 and PA3 camping this week end and had the exact same problem you describe. I had one cable in the wrong place so here is what you need to make sure you do. The cord From ACC1 on the KX3 must be connected to the ACC1-XCVR on the PX3. The cord from the black box of the control cord of the PX3 must be connected to the ACC1-PC on the PX3. All the other cords can be plugged in or left out and of course the PX3 will not work properly if they are left out but the PA3 will work just fine as long as those two cords are connected. I hope this helps you. I lost about 4 hours of operating time until I figured out just what I needed to connect to get it to work. 73 and good luck Ken. W0CZ w0cz at i29 dot net Sent from my iPad > On May 30, 2016, at 4:11 PM, Terry Brownwrote: > > I disconnected my PX3 and KX3 from my KXPA100 to take on a SOTA activation. > When I returned I connected everything as it was before, and when I try to > turn on the KXPA100 from the KX3 "PA Mode" to on, the amp will not turn on, > and after a few seconds the PA Mode goes to off. I disconnect the PX3 from > the circuit and connect the KX3 to the KXPA100 directly and everything works > as normal. I have checked the continuity of the connecting cables from the > PX3 and KX3 and there are no short or open circuits. > > > > I have triple checked my cable connections to make sure they are connected > properly and have pushed in on the plugs to make sure they are firmly > seated. The PX3 is showing properly one every band, and appears to be > working normally. The KX3 seems to be working fine as well, I just can't > turn on the KPXA100. > > > > Any suggestions would be really helpful. Thanks! > > > > 73's, > > > > Terry, N7TB > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w...@i29.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2 accessibility improvements ready for review/test
We just completed the first phase of accessibility improvements for the KX2. The CW audio-tone interface now covers all front panel switches and knobs (except frequency memory store/recall), bringing the KX2 up to the same level as the KX3. Menu and frequency memory accessibility is also planned, but this is a complex upgrade and we can't put a date on it yet. If you have a KX2 and would like to try the new field-test firmware, or if you'd just like to review the KX2 Accessibility documentation, please contact me directly. 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Using MARS M110A with K3 + Microkeyer?
Has anyone been able to get the MARS soundcard mode M110A working with their K3 and an original microKeyer? I tried to get the program working using DATA A, but I get almost no output power. With the K3 set to 50 watts, I get maybe 5 watts output as monitored with a Bird wattmeter. M110A is a wideband mode that is not allowed on the ham bands, but is widely used within MARS for digital traffic. M110A works great with my old TS-2000 and a homebrew, passive soundcard interface. Barry Priddy - K5VIP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Shipping Status requests on KX3
Hi everyone, Its been a busy last couple of weeks at Elecraft! We are still recovering from Dayton and are working on entering all of the latest KX2 web orders . At the moment we are overloaded by all the email requests for KX2 order status (some just a couple of days after order.) This in turn is delaying our entry of the remaining KX2 orders. If at all possible, please hold off another week asking for order status unless its absolute necessary. That will help us get your KX2 out as quickly as possible. We will keep updating the status page with more detailed info as we have it. See: http://www.elecraft.com/elecraft_shipping_status.htm 73, Eric /elecraft.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
Joe, I use the aux out on my SignaLink USB to go to my powered speakers. I can hear simultaneously what I'm decoding using the built in sound card. I found this is the easiest to do and requires nothing other than invoking the digital software I use, no cable changes. There is one exception, the mic input is used for input from the SignaLink. This very same path is used for non-digital modes. If I go voice contesting I can switch over to my Heil Pro headset with mic and use a foot switch. I would do the same whether I used a KX2, KX3, or K3. In fact, I did the same when I used my Orion II. I use my KX3 for contesting, both as a base with the matching KXPA100 or QRP on Field Day. I find that the radio is as competitive and as any radio used for SOAB; the limitations in my scoring is operator and not radio. My experience in contesting, seriously, is not the KX3, but some of the really poor signals and poor operation of the other stations. For instance, the key clicks from Yeasu rigs are a real pain if the station is strong. And, our local power company is the other limitation. 73, Barry K3NDM -- Original Message -- From: "Joe Subich, W4TV"To: elecraft@mailman.qth.net Sent: 5/31/2016 2:41:28 PM Subject: Re: [Elecraft] KX-3 If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. Unfortunately, since the KX3 (and KX2) lack dedicated Line In/Ln Out jacks, interfacing headphones and a mic at the same time as a sound card for DVK and/or RTTY/PSK is nearly impossible. That significantly limits the suitability of the KX3 (and KX2) as a serious contest rig even if one discounts the 20 dB *higher* transmit phase noise of the KX3 (comparison of composite noise test data of K3/100 [Feb 2009 > 1 KHz.] vs. KX3 [Dec 2012]) or nearly double the keying bandwidth at 60 WPM of the KX3 vs. K3 (same two product reviews). The K3 is cleaner at 1 KW than the barefoot KX3. 73, ... Joe, W4TV On 5/31/2016 11:58 AM, Mike Dodd wrote: On 5/31/2016 11:40 AM, Mike Kasrich wrote: Has anyone put together a KX-3 kit. Is any more or less involved that putting together a K-3? I assembled both. The K3 is more involved than the KX3, but both were straightforward. The instructions and parts lists are top-notch for both rigs. Anyone use a KX-3 in a contest and interfaced with N1MM+? Any quirks/tips? Yes to both. Both play very well with N1MM+. I haven't noticed any quirks. On SSB contests with non-variable exchanges (i.e., no serial number), I recorded messages in the KX3's two DVR memories. This allowed me to operate in one mode (e.g., S or run), but I needed more DVR memories to record messages for the opposite mode. The K3s has more DVR memories, so I expect to be able to use four of them. I did NOT record .wav files and play them through the rig for total voice automation. I don't like the typical pause between spoken letters and numerals. W1AW FIVE NINE NUMBERTHREESEVENTWO If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. My KX3 currently is in storage, and is not for sale. Hope this helps. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k3...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
My general operating style is to use a CW memory REPEAT for sending CQ, both at home and during field operations. I sure would be nice to end the memory with a tap of the key and not send an element. Both my new KX2 and KX3. John KN5L On 05/30/2016 06:27 PM, Jim Rodenkirch wrote: > Could sumpin' be done, firmware wise, to let us hit the the key without > sending the dit or dah? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] The P3 has been sold
The P3 has been sold. Thanks to everyone who inquired. Dick, N5XRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] For P3 sale
I don't know if this is the proper place to offer things for sale, however, I have a P3, with the P3SVGA-F video adapter installed for sale. I operate PSK f rom my apartment on a small antenna and don't need or use the P3. If interested eMail me at: rhemi...@sbcglobal.net Thanks Dick N5XRD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. Unfortunately, since the KX3 (and KX2) lack dedicated Line In/Ln Out jacks, interfacing headphones and a mic at the same time as a sound card for DVK and/or RTTY/PSK is nearly impossible. That significantly limits the suitability of the KX3 (and KX2) as a serious contest rig even if one discounts the 20 dB *higher* transmit phase noise of the KX3 (comparison of composite noise test data of K3/100 [Feb 2009 > 1 KHz.] vs. KX3 [Dec 2012]) or nearly double the keying bandwidth at 60 WPM of the KX3 vs. K3 (same two product reviews). The K3 is cleaner at 1 KW than the barefoot KX3. 73, ... Joe, W4TV On 5/31/2016 11:58 AM, Mike Dodd wrote: On 5/31/2016 11:40 AM, Mike Kasrich wrote: Has anyone put together a KX-3 kit. Is any more or less involved that putting together a K-3? I assembled both. The K3 is more involved than the KX3, but both were straightforward. The instructions and parts lists are top-notch for both rigs. Anyone use a KX-3 in a contest and interfaced with N1MM+? Any quirks/tips? Yes to both. Both play very well with N1MM+. I haven't noticed any quirks. On SSB contests with non-variable exchanges (i.e., no serial number), I recorded messages in the KX3's two DVR memories. This allowed me to operate in one mode (e.g., S or run), but I needed more DVR memories to record messages for the opposite mode. The K3s has more DVR memories, so I expect to be able to use four of them. I did NOT record .wav files and play them through the rig for total voice automation. I don't like the typical pause between spoken letters and numerals. W1AW FIVE NINE NUMBERTHREESEVENTWO If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. My KX3 currently is in storage, and is not for sale. Hope this helps. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: K3 transceiver w/ options
Selling my K3. Serial # 6625. Includes the following options: KPA3 100 watt amp module KAT3 Antenna Tuner module KXV3 RX Antenna, XVRTR interface, IF Tap board PR6 6 meter preamp 400Hz 8 pole CW Filter 2.8 kHz 8 pole SSB filter 13 kHz AM/FM 8 pole filter MH2 Hand Mic Power cable Computer interface cable All manuals plus Fred Cady KE7X manual Radio is in perfect cosmetic & operating condition. Always used indoors and I’m a non-smoker. Didn’t see a lot of use as I have several radios and am only at this QTH half the year. You’ll be pleased. $ 2395 includes FedEx Ground shipping CONUS. Friends & family PayPal OK too. If you’d prefer to demo & pick up the radio at my suburban Cleveland, OH QTH that’s fine too. I’m also willing to remove some of the options (mic,filters & preamp) to reduce your cost. Brian K3USC (since 1962) home phone 216-848-0211 cell phone 814-866-2585 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
The KX3 (no "-") requires a lot less assembly than a k3. And it connects almost like K3 to computer. Major missing items are no DTR-RTS available on serial connector and no dedicated Lin In/Out. Sent from my iPhone ...nr4c. bill > On May 31, 2016, at 11:40 AM, Mike Kasrichwrote: > > Has anyone put together a KX-3 kit. Is any more or less involved that putting > together a K-3? Anyone use a KX-3 in a contest and interfaced with N1MM+? Any > quirks/tips? and finally I am looking for a KX-3 trying to decide between new > and used. Anyone have a KX-3 they are looking to part with? Please reply > direct to aj9c at indy.rr.com so as not to clutter the list. > > 73 > > Mike/aj9c > > p.s. this would be mainly a back up/travel rig. Looking at the IC-7300 too > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
On 5/31/2016 11:40 AM, Mike Kasrich wrote: Has anyone put together a KX-3 kit. Is any more or less involved that putting together a K-3? I assembled both. The K3 is more involved than the KX3, but both were straightforward. The instructions and parts lists are top-notch for both rigs. Anyone use a KX-3 in a contest and interfaced with N1MM+? Any quirks/tips? Yes to both. Both play very well with N1MM+. I haven't noticed any quirks. On SSB contests with non-variable exchanges (i.e., no serial number), I recorded messages in the KX3's two DVR memories. This allowed me to operate in one mode (e.g., S or run), but I needed more DVR memories to record messages for the opposite mode. The K3s has more DVR memories, so I expect to be able to use four of them. I did NOT record .wav files and play them through the rig for total voice automation. I don't like the typical pause between spoken letters and numerals. W1AW FIVE NINE NUMBERTHREESEVENTWO If I could get rid of the pauses, I could use the K3s built-in USB sound card. The KX3 doesn't have one, so I'd need an external audio interface or sound card if I wanted total voice automation with that rig. My KX3 currently is in storage, and is not for sale. Hope this helps. -- 73, Mike N4CF Louisa County, VA USA Elecraft K3s/100 Carolina Windom up 45' http://n4cf.mdodd.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
True, NR4C...BUTwhy should one have to push a button on the radiothat places more stress on whichever button is employedI'd much rather see, hopefully, some sort of fix via firmware mod, where one can use the key to do that without adding a "wear and tear" element to expensive radios!!! I see support from W0EB for this and hope others chime in if they share our view72 de Jim R. K9JWV -- View this message in context: http://elecraft.365791.n2.nabble.com/Suggested-KX3-upgrade-tp7618248p7618279.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX-3
KX3 is a bunch easier to build and takes much less time than the K3/K3s. Depending on your options there are some small connectors to deal with but not too bad. Compared to working on a cell phone it is a piece of cake. You can download the manual(s) from the Elecraft website and check it out. 73, Jim Jim Finan AB4AC Sent from my BlackBerry 10 smartphone. Original Message From: Mike Kasrich Sent: Tuesday, May 31, 2016 11:41 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KX-3 Has anyone put together a KX-3 kit. Is any more or less involved that putting together a K-3? Anyone use a KX-3 in a contest and interfaced with N1MM+? Any quirks/tips? and finally I am looking for a KX-3 trying to decide between new and used. Anyone have a KX-3 they are looking to part with? Please reply direct to aj9c at indy.rr.com so as not to clutter the list. 73 Mike/aj9c p.s. this would be mainly a back up/travel rig. Looking at the IC-7300 too __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to jimfi...@att.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX-3
Has anyone put together a KX-3 kit. Is any more or less involved that putting together a K-3? Anyone use a KX-3 in a contest and interfaced with N1MM+? Any quirks/tips? and finally I am looking for a KX-3 trying to decide between new and used. Anyone have a KX-3 they are looking to part with? Please reply direct to aj9c at indy.rr.com so as not to clutter the list. 73 Mike/aj9c p.s. this would be mainly a back up/travel rig. Looking at the IC-7300 too __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: KX1 with all of the options 80/40/30/20 - SOLD
KX1 has been sold. Hi All, After getting my KX3 I no longer use my KX1 and am selling it. I built my KX1 kit in 2011 and am a very experienced builder, the radio works perfectly. The KX1 has been always kept in my non-smoking home. Selling the KX1 with the KXAT1 internal antenna tuner. The KX1 has the KXB3080 option giving the radio coverage on 80,40,30, and 20 meters. It also comes with the KXPD1 plug in paddle. The radio is powered with 6 UltraFire Li-ion AA sized batteries giving it plenty of capacity. I will include two UltraFire rapid chargers with the KX1. Also include is the original documentation, a BNC to binding post adaptor, and a cigarette lighter plug adaptor. Im asking $500 for the complete KX1 radio and accessories. I will ship within the continental US and cover shipping and insurance. I can accept payment by PayPal or a US Postal Service money order. If you are interested please contact me directly at: len at ka7ftp dot com Pictures: http://ka7ftp.com/KX1/ 73 KA7FTP Len __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to l...@ka7ftp.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [K2} Wanted KSB2 module
Hi Anyone got a spare KSB2, built or unbuilt kit , they want to get rid of? E mail me off reflector please. 73 Bob G3PJT PS repeat post as subject format error __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
Any button will definitely stop it, but (and this includes the K3, K3S, KX3 and possibly the KX2 as well) oft times you will get a partial (dot or dash) sent even when pressing a button. Even when calling CQ looking for a general QSO this can be annoying and confusing to both the sending station and any station listening/planning on answering the CQ. It definitely is not exclusive to "running" in a contest. It bugs me as well and I am not a contester. The original poster's request is certainly reasonable and I suspect this has bugged a lot of people (myself included) for a long time but most of us didn't want to endure the "use N1MM" and other similar replies having no real bearing on the original request. Jim - W0EB -- Original Message -- From: "Nr4c"To: "Jim Rodenkirch" Cc: elecraft@mailman.qth.net Sent: 5/31/2016 9:40:32 AM Subject: Re: [Elecraft] Suggested KX3 "upgrade" I think pressing any button the KX3 will terminate the msg repeat. Sent from my iPhone ...nr4c. bill On May 31, 2016, at 10:17 AM, Jim Rodenkirch wrote: My apologies for NOT stipulating my range of operations when I submitted the original postI feel like others have posted a request for this sort of "improvement" earlierJim R. K9JWV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
I think pressing any button the KX3 will terminate the msg repeat. Sent from my iPhone ...nr4c. bill > On May 31, 2016, at 10:17 AM, Jim Rodenkirchwrote: > > My apologies for NOT stipulating my range of operations when I submitted the > original postI feel like others have posted a request for this sort of > "improvement" earlierJim R. K9JWV > > > > -- > View this message in context: > http://elecraft.365791.n2.nabble.com/Suggested-KX3-upgrade-tp7618248p7618272.html > Sent from the Elecraft mailing list archive at Nabble.com. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
My apologies for NOT stipulating my range of operations when I submitted the original postI feel like others have posted a request for this sort of "improvement" earlierJim R. K9JWV -- View this message in context: http://elecraft.365791.n2.nabble.com/Suggested-KX3-upgrade-tp7618248p7618272.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 - Wanted KSB2 module
Hi Anyone got a spare KSB2, built or unbuilt kit , they want to get rid of? E mail me off reflector please. 73 Bob G3PJT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Another cool KX2 video from the "Goat"
Perfect, thanks! On Tue, May 31, 2016, 02:46 Peter Paulywrote: > I think it's this one: > > http://www.amazon.com/dp/B002EQ6E9E > > On Tue, May 31, 2016 at 1:06 AM, Bruce Nourish wrote: > >> Does anyone know what model microphone Frank is using for SSB around the >> 0:30 mark? >> >> On Mon, May 30, 2016 at 3:49 PM Peter Pauly wrote: >> >>> https://www.youtube.com/watch?v=0ORBxLV72n4 >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to w0...@w0mbt.net >>> >> > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Suggested KX3 "upgrade"
I KNEW someone wud introduce N1MM as the answer to my "problem"/request and, without knowing my operating "style"/focus and making an assumption, the suggestion of using a contesting program is sorta expected. I didn't mention "full blown contests" as a supporting argument for my "needy requirement" but, you are correct..N1MM s/w wud remove the need for using the "beacon mode." BUT - you are assuming - that's a bad thing - all of my operating time is not spent in "full blown contests." Approximately 10% of my time is in "full blown events" -- the other 90% is focused on: - NPOTA - SOTA - 2 hour sprints where taking the time to use N1MM isn't worth it - in fact, there are other s/w programs that work mo betta than N1MM ("gasp," total heresy, I suspect we'll hear from the contesting "bubbas") - last, but not least.I enjoy a QSO, for the simple act/pleasure of meeting new and previously met hams. Believe it, or not, that task involves, more often than not, calling CQa lot!! OK? My "request" remaing salient and germane...72 de Jim R. K9JWV -- View this message in context: http://elecraft.365791.n2.nabble.com/Suggested-KX3-upgrade-tp7618248p7618269.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Remote Power On/Off
How do you save the current settings? I think most of us at some point in our lives have had a power failure while operating. John KK9A Jim Brown jim at audiosystemsgroup.com Mon May 30 21:56:46 EDT 2016 Yes. When you turn the K3 off with its power switch, it writes current conditions to its RAM. When you turn it back on, it loads those settings. When you drop power to the K3, that write doesn't happen, so it comes up with whatever was last saved. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Another cool KX2 video from the "Goat"
I think it's this one: http://www.amazon.com/dp/B002EQ6E9E On Tue, May 31, 2016 at 1:06 AM, Bruce Nourishwrote: > Does anyone know what model microphone Frank is using for SSB around the > 0:30 mark? > > On Mon, May 30, 2016 at 3:49 PM Peter Pauly wrote: > >> https://www.youtube.com/watch?v=0ORBxLV72n4 >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to w0...@w0mbt.net >> > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com