Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Eric Swartz - WA6HHQ, Elecraft
Folks - Let's officially close this thread. We have overloaded the list on this 
topic and need to give everyone a reprieve :-)


73m
Eric
/You tired list moderator heading to Visalia to get more tired tomorrow/ ;-)
/elecraft.com/

On 4/20/2017 9:24 PM, Richard Fjeld wrote:

I have always thought the best way to avoid a lightning strike is to bleed off 
any build up of energy that may be on the antenna.

Many have seen this video of the two guys climbing a 1768 foot TV antenna 
tower.  It clearly shows devices to dissipate energy.
There is one right at the very top when they get there, but not fully shown as 
the others are.

There is a short animation in the beginning.  This is not for weak hearts.
https://www.youtube.com/watch?v=7k4Xk1mEwmI
As you watch this, think about climbing back down.

Dick, n0ce


On 4/20/2017 2:13 PM, Terry Schieler wrote:

POOF!  Hey what happened to the ground rod through concrete thread?  ;o)

Terry, W0FM




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric.swa...@elecraft.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Additional KPA1500 amplifier information

2017-04-20 Thread Eric Swartz
Yes. 2 devices.

Eric
*elecraft.com *

On Thu, Apr 20, 2017 at 10:11 PM, James F. Boehner MD via Elecraft <
elecraft@mailman.qth.net> wrote:

> LDMOS technology?
>
>
> '73 de JIM N2ZZ
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> Wayne
> Burdick
> Sent: Friday, April 21, 2017 12:31 AM
> To: Elecraft Reflector
> Cc: elecraft...@yahoogroups.com; elecr...@yahoogroups.com
> Subject: [Elecraft] Additional KPA1500 amplifier information
>
> Updated FAQ on the KPA1500:
>
> http://www.elecraft.com/KPA1500/KPA1500%20FAQ%20rev%20A1b.pdf
>
> High-resolution front panel photo:
>
> http://www.elecraft.com/KPA1500/KPA1500_cropped_hi.jpg
>
> High-resolution rear panel photo:
>
> http://www.elecraft.com/KPA1500/KPA1500_back_rgb_hi.jpg
>
> KPA1500 web page:
>
> http://www.elecraft.com/KPA1500/KPA1500.htm
>
> * * *
>
> Wayne
> N6KR
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to jboehne...@yahoo.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swa...@elecraft.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] [Elecraft_K3] New from Elecraft: KPA1500 amplifier with built-in ATU, separate power supply

2017-04-20 Thread Wes Stewart

Not enough full power tuner range.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Additional KPA1500 amplifier information

2017-04-20 Thread Wayne Burdick
Yup. 50 volt devices with plenty of thermal margin. 

Wayne
N6KR


> On Apr 20, 2017, at 10:11 PM, James F. Boehner MD  
> wrote:
> 
> LDMOS technology?
> 
> 
> '73 de JIM N2ZZ


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Additional KPA1500 amplifier information

2017-04-20 Thread James F. Boehner MD via Elecraft
LDMOS technology?


'73 de JIM N2ZZ

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne
Burdick
Sent: Friday, April 21, 2017 12:31 AM
To: Elecraft Reflector
Cc: elecraft...@yahoogroups.com; elecr...@yahoogroups.com
Subject: [Elecraft] Additional KPA1500 amplifier information

Updated FAQ on the KPA1500:

http://www.elecraft.com/KPA1500/KPA1500%20FAQ%20rev%20A1b.pdf

High-resolution front panel photo:

http://www.elecraft.com/KPA1500/KPA1500_cropped_hi.jpg

High-resolution rear panel photo:

http://www.elecraft.com/KPA1500/KPA1500_back_rgb_hi.jpg

KPA1500 web page:

http://www.elecraft.com/KPA1500/KPA1500.htm

* * *

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to jboehne...@yahoo.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] [Elecraft_K3] New from Elecraft: KPA1500 amplifier with built-in ATU, separate power supply

2017-04-20 Thread Wayne Burdick
Ken K6MR  wrote:

> One interesting item in the rear panel photo: Tx Sample.  Output for “Pure 
> Signal” style IMD improvement using pre-distortion in an SDR radio?

Yes.

Wayne
N6KR



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Elecraft_K3] New from Elecraft: KPA1500 amplifier with built-in ATU, separate power supply

2017-04-20 Thread Ken K6MR
The Elecraft folks should be in charge of government secrets… nothing would 
ever leak  :^)

One interesting item in the rear panel photo: Tx Sample.  Output for “Pure 
Signal” style IMD improvement using pre-distortion in an SDR radio?

Ken K6MR

From: 'Stephen Bloom' sbl...@acsalaska.net 
[Elecraft_K3]
Sent: Thursday, April 20, 2017 9:40 PM
To: elecraft...@yahoogroups.com
Subject: RE: [Elecraft_K3] New from Elecraft: KPA1500 amplifier with built-in 
ATU, separate power supply


Wow …Wayne and Eric, you do realize, this is the closest thing ever to a 
unicorn turning real, right?

Congrats/73
Steve KL7SB who *will* own 1 or 2 of these puppies


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Additional KPA1500 amplifier information

2017-04-20 Thread Wayne Burdick
Updated FAQ on the KPA1500:

http://www.elecraft.com/KPA1500/KPA1500%20FAQ%20rev%20A1b.pdf

High-resolution front panel photo:

http://www.elecraft.com/KPA1500/KPA1500_cropped_hi.jpg

High-resolution rear panel photo:

http://www.elecraft.com/KPA1500/KPA1500_back_rgb_hi.jpg

KPA1500 web page:

http://www.elecraft.com/KPA1500/KPA1500.htm

* * *

Wayne
N6KR


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Richard Fjeld
I have always thought the best way to avoid a lightning strike is to bleed off 
any build up of energy that may be on the antenna.

Many have seen this video of the two guys climbing a 1768 foot TV antenna 
tower.  It clearly shows devices to dissipate energy.
There is one right at the very top when they get there, but not fully shown as 
the others are.

There is a short animation in the beginning.  This is not for weak hearts.
https://www.youtube.com/watch?v=7k4Xk1mEwmI
As you watch this, think about climbing back down.

Dick, n0ce


On 4/20/2017 2:13 PM, Terry Schieler wrote:

POOF!  Hey what happened to the ground rod through concrete thread?  ;o)

Terry, W0FM




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Matthew Cook
Right so if I book a ticket now I can get there Sunday... damn that's a
long drive.

73

Matthew
VK5ZM

On 21 April 2017 at 02:20, Wayne Burdick  wrote:

> http://www.elecraft.com/images/visalia1.jpg
>
> Watch this space for further details :)
>
> 73,
>
> Wayne, N6KR
> Eric, WA6HHQ
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk...@bistre.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Matthew Cook
Apparently he's here this weekend.

73

Matthew
VK5ZM

On 21 April 2017 at 08:22, Ron D'Eau Claire  wrote:

> Eric, you are better at that than White House spokesperson Mr. Spicer!
>
> 73, Ron AC7AC
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
> Swartz - WA6HHQ, Elecraft
> Sent: Thursday, April 20, 2017 3:08 PM
> To: KV5J; elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Another really good reason to come to the Visailia
> DX convention this weekend...
>
> The posting below is a little inaccurate.
>
> If we are going to announce something like everyone is talking about, we
> are
> not yet taking orders.
>
> That said, we can put people on a notification list for when we will have
> additional info and for when we will be taking orders for whatever we are
> talking about.
>
> 73,
>
> Eric
> /elecraft.com/
>
> On 4/20/2017 2:54 PM, KV5J via Elecraft wrote:
> > I just called and pre-ordered one.  I'm 3rd. on the list! Better hurry.
> >
> >
> >
> > --
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk...@bistre.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] New from Elecraft: KPA1500 amplifier with built-in ATU, separate power supply

2017-04-20 Thread Wayne Burdick
We’re pleased to announce our KPA1500 solid-state amplifier, covering 160 to 6 
meters. Max power output is 1500 Watts. Other important features include:

  - Small RF deck fits on nearly any desktop (~4.5 x 13 x 11.5”, HWD); weighs 
only ~22 pounds
  - Separate lightweight switching power supply weighs ~15 pounds (standard 
cable is 6 feet long)
  - Styling matches our other K-Line products
  - Built-in wide-range antenna tuner (ATU) with instant recall of 
per-band/per-segment settings
  - Dual antenna jacks
  - Rich I/O complement including Ethernet
  - Interfaces to nearly any transceiver; fully integrated with K3 and K3S
  - Extensive parametric monitoring ensures safe operation
  - Silent PIN-diode T/R switching (no QSK relays)

Introductory price: $5995.

For photos and additional information, use the links below:

   http://www.elecraft.com/KPA1500/KPA1500%20FAQ%20rev%20A1b.pdf


If you’d like to be notified when we begin taking orders, please contact 
Elecraft. Or add your name to the list at the Visalia DX convention this 
weekend. 

Required notification: "This device has not yet been authorized as required by 
FCC rules. It is not, and may not be
offered for sale, or lease, or sold or leased, until authorization is obtained."

73,
Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] [Amps] Fwd: Re: FYI Visalia Attendees

2017-04-20 Thread Vic Rosenthal 4X6GP

About time!

73,
Vic, 4X6GP
Rehovot, Israel
Formerly K2VCO
http://www.qsl.net/k2vco/

On 21 Apr 2017 00:03, Ed Muns wrote:


   Busted link.  Correction:
   [1]http://www.elecraft.com/images/visalia1.jpg
   73,
   Ed W0YK

References

   1. http://www.elecraft.com/images/visalia1.jpg

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Martin Sole
Check the SPE 2k and 1.3k prices for another near competitor. I would think 
they show the range if likely numbers.


Sent from my iPad

> On Apr 21, 2017, at 06:20, Brian Denley  wrote:
> 
> Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a 
> 1500 watt solid state amp, but the PowerGenius is $7000.  Prometheus is even 
> higher.
> 
> Brian 
> KB1VBF
> Sent from my iPad
> 
>> On Apr 20, 2017, at 8:54 PM, charlie carroll  wrote:
>> 
>> well, and then there's... has it completed FCC testing?
>> 
>> 73 charlie, k1xx
>> 
>>> On 4/20/2017 8:50 PM, Ken Widelitz wrote:
>>> And the only question that remains .
>>> 
>>> 
>>> drum roll 
>>> 
>>> 
>>> MSRP?
>>> 
>>> 
>>> 73,Ken, K6LA / VY2TT
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k...@k1xx.com
>>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to b.den...@comcast.net
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to hs0...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Brian Denley
Not sure my wife will fall for that.

Brian 
KB1VBF
Sent from my iPad

> On Apr 20, 2017, at 11:25 PM, Fred Jensen  wrote:
> 
> If it costs more, it must be better
> 
> 73,
> 
> Fred ("Skip") K6DGW
> Sparks NV USA
> Washoe County DM09dn
> 
> 
> 
>> On 4/20/2017 8:20 PM, Brian Denley wrote:
>> Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a 
>> 1500 watt solid state amp, but the PowerGenius is $7000.  Prometheus is even 
>> higher.
>> 
>> Brian
>> KB1VBF
>> Sent from my iPad
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to b.den...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Fred Jensen

If it costs more, it must be better

73,

Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn



On 4/20/2017 8:20 PM, Brian Denley wrote:

Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a 
1500 watt solid state amp, but the PowerGenius is $7000.  Prometheus is even 
higher.

Brian
KB1VBF
Sent from my iPad



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Brian Denley
Correcting myself:  the ALS-1306 is only 1200 watts.

Brian 
KB1VBF
Sent from my iPad

> On Apr 20, 2017, at 11:20 PM, Brian Denley  wrote:
> 
> Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a 
> 1500 watt solid state amp, but the PowerGenius is $7000.  Prometheus is even 
> higher.
> 
> Brian 
> KB1VBF
> Sent from my iPad
> 
>> On Apr 20, 2017, at 8:54 PM, charlie carroll  wrote:
>> 
>> well, and then there's... has it completed FCC testing?
>> 
>> 73 charlie, k1xx
>> 
>>> On 4/20/2017 8:50 PM, Ken Widelitz wrote:
>>> And the only question that remains .
>>> 
>>> 
>>> drum roll 
>>> 
>>> 
>>> MSRP?
>>> 
>>> 
>>> 73,Ken, K6LA / VY2TT
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to k...@k1xx.com
>>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to b.den...@comcast.net
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to b.den...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Brian Denley
Let's see: the ALS-1306 is $2800 without a tuner for price comparison for a 
1500 watt solid state amp, but the PowerGenius is $7000.  Prometheus is even 
higher.

Brian 
KB1VBF
Sent from my iPad

> On Apr 20, 2017, at 8:54 PM, charlie carroll  wrote:
> 
> well, and then there's... has it completed FCC testing?
> 
> 73 charlie, k1xx
> 
>> On 4/20/2017 8:50 PM, Ken Widelitz wrote:
>> And the only question that remains .
>> 
>> 
>> drum roll 
>> 
>> 
>> MSRP?
>> 
>> 
>> 73,Ken, K6LA / VY2TT
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to k...@k1xx.com
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to b.den...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] The K2 sure is a nice sounding radio

2017-04-20 Thread Harry Yingst via Elecraft
I built a k2 years ago and sold it off as I was moving to help with the care of 
my elderly father.
I had forgotten how nice the K2 sounds





  From: Eric J 
 To: "elecraft@mailman.qth.net"  
 Sent: Thursday, April 20, 2017 9:46 PM
 Subject: Re: [Elecraft] The K2 sure is a nice sounding radio
   
I only operate CW, but I've always thought the K2 was a very pleasant radio to 
listen to. I have one with DSP and one with the AF filter and I prefer the 
sound of the AF filter too. I've tried a couple of separate speakers, but still 
prefer the internal speaker for some reason. There aren't a lot of radios that 
have aged as well as the K2. It's the definition of "classic".  But then, what 
do I know? I still think my Drake 2B is a pleasure to listen to.

Eric

KE6US

On 4/20/2017 6:07 PM, Harry Yingst via Elecraft wrote:



A few months ago I was itching for a big kit build so I picked up a K2 (I 
needed a winter project)
I took my time building it and adding in as many options as I could fit along 
with some mods.

I'm sitting here listening to it and I was thinking it sure is a nice sounding 
radio; while it may

not sound as full as the K3 (the K3 has wider filters) but the K2's audio is 
nice and clear.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric_c...@hotmail.com
.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to hlyin...@yahoo.com


   
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] A little theory

2017-04-20 Thread Terry Schieler
Thanks.  My point exactly, Guy.

 

Terry, W0FM

 

From: Guy Olinger K2AV [mailto:k2av@gmail.com] 
Sent: Thursday, April 20, 2017 8:40 PM
To: Ron D'Eau Claire; Terry Schieler; elecraft@mailman.qth.net
Subject: Re: [Elecraft] A little theory

 

Kind of like the sea drawing out before a tsunami :>)

 

73, Guy K2AV 

 

On Thu, Apr 20, 2017 at 12:08 PM Terry Schieler  wrote:

Good point.  Here is my "theory" on this OT overload thing, Ron.  When the
Off Topic contents of the posts become so frequent and overbearing, there
appears to be a direct correlation with a void in new product announcements
from the boys at Elecraft, which normally incite On Topic comments that fill
this space.  Perhaps there is something looming on the horizon.  ;o)

73,  Terry  WØFM



-Original Message-
From: Ron D'Eau Claire [mailto:r...@cobi.biz]
Sent: Tuesday, April 18, 2017 9:45 PM
To: kev...@coho.net; elecraft@mailman.qth.net; 'QRP-L Mailing List'
Subject: Re: [Elecraft] A little theory

I forgot to add, if you have any comments, let us take them off the Elecraft
list. The OT Traffic here has been FIERCE  lately, Hi!

73, Ron AC7AC


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k2av@gmail.com

-- 

Sent via Gmail Mobile on my iPhone

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA 500 vs New 1500 watt amp

2017-04-20 Thread Scott Manthe
One S-unit in a pile-up or on a noisy band can be a big deal. If all you 
do is rag chew in low noise environments then maybe you wouldn't notice. 
In the noise on the low bands or if you're trying to break a pile up, 
that 4.5 dB means you're a lot louder than someone else. Whether that is 
worth the price is up to the op to decide, but the myth that the 1KW 
difference in power makes no difference is just that, a myth.


73,
Scott N9AA


On 4/20/17 9:12 PM, Terry Brown wrote:

If the new Elecraft amp is indeed 1500 watts it might be worth considering that 
going from 500 to 1500 watts is only about 4.5 Db or less than 1 S-unit in 
signal strength.  If I owned the KPA 500 it would be a hard sell to get me to 
move to ANY 1500 watt amp.

Respectfully,

Terry, N7TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to scott.man...@gmail.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] A little theory

2017-04-20 Thread Guy Olinger K2AV
Kind of like the sea drawing out before a tsunami :>)

73, Guy K2AV

On Thu, Apr 20, 2017 at 12:08 PM Terry Schieler  wrote:

> Good point.  Here is my "theory" on this OT overload thing, Ron.  When the
> Off Topic contents of the posts become so frequent and overbearing, there
> appears to be a direct correlation with a void in new product announcements
> from the boys at Elecraft, which normally incite On Topic comments that
> fill
> this space.  Perhaps there is something looming on the horizon.  ;o)
>
> 73,  Terry  WØFM
>
>
>
> -Original Message-
> From: Ron D'Eau Claire [mailto:r...@cobi.biz]
> Sent: Tuesday, April 18, 2017 9:45 PM
> To: kev...@coho.net; elecraft@mailman.qth.net; 'QRP-L Mailing List'
> Subject: Re: [Elecraft] A little theory
>
> I forgot to add, if you have any comments, let us take them off the
> Elecraft
> list. The OT Traffic here has been FIERCE  lately, Hi!
>
> 73, Ron AC7AC
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av@gmail.com
>
-- 
Sent via Gmail Mobile on my iPhone
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KPA 500 vs New 1500 watt amp

2017-04-20 Thread Dr. William J. Schmidt, II
Well you might consider this.  I do a lot of DXing from J6.  Typically the
pile-ups are hundreds if not more people calling once it gets going.  That 1
s-unit difference can mean the difference between working the DX or the band
going out before you do.   It's personal, right?  Kinda of reminds me of the
"I really don't need the horsepower of a corvette" argument.  Yep, maybe you
don't and we all can't be driving corvettes.  But having one SURE IS FUN! 


Dr. William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ 

Owner - Operator
Big Signal Ranch - K9ZC
Staunton, Illinois

Owner - Operator
Villa Grand Piton - J68HZ
Soufriere, St. Lucia W.I.
Rent it: www.VillaGrandPiton.com
Like us on Facebook! 


email:  b...@wjschmidt.com


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Terry
Brown
Sent: Thursday, April 20, 2017 8:12 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KPA 500 vs New 1500 watt amp

If the new Elecraft amp is indeed 1500 watts it might be worth considering
that going from 500 to 1500 watts is only about 4.5 Db or less than 1 S-unit
in signal strength.  If I owned the KPA 500 it would be a hard sell to get
me to move to ANY 1500 watt amp. 

Respectfully,

Terry, N7TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to b...@wjschmidt.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] The K2 sure is a nice sounding radio

2017-04-20 Thread Eric J
I only operate CW, but I've always thought the K2 was a very pleasant radio to 
listen to. I have one with DSP and one with the AF filter and I prefer the 
sound of the AF filter too. I've tried a couple of separate speakers, but still 
prefer the internal speaker for some reason. There aren't a lot of radios that 
have aged as well as the K2. It's the definition of "classic".  But then, what 
do I know? I still think my Drake 2B is a pleasure to listen to.

Eric

KE6US

On 4/20/2017 6:07 PM, Harry Yingst via Elecraft wrote:



A few months ago I was itching for a big kit build so I picked up a K2 (I 
needed a winter project)
I took my time building it and adding in as many options as I could fit along 
with some mods.

I'm sitting here listening to it and I was thinking it sure is a nice sounding 
radio; while it may

not sound as full as the K3 (the K3 has wider filters) but the K2's audio is 
nice and clear.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric_c...@hotmail.com
.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] If you're going to Visalia ...

2017-04-20 Thread john
You can see the antenna tuner buttons in the photo. The amp appears to be
the perfect size and weight to be carried as luggage.

John KK9A


>From charlie carroll k1xx
Thu Apr 20 19:19:24 EDT 2017

So, based on Wayne's last little snippet about weight, here's a few 
ideas for everyone to toss around.

1. It will have a separate power supply.  I'd estimate the weight for a 
good 3kw switcher in the 10-12 lb area.
2. The tuner will be another separate unit.  No idea on a weight for 
this one.

73 charlie, k1xx

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] KPA 500 vs New 1500 watt amp

2017-04-20 Thread Terry Brown
If the new Elecraft amp is indeed 1500 watts it might be worth considering that 
going from 500 to 1500 watts is only about 4.5 Db or less than 1 S-unit in 
signal strength.  If I owned the KPA 500 it would be a hard sell to get me to 
move to ANY 1500 watt amp. 

Respectfully,

Terry, N7TB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] The K2 sure is a nice sounding radio

2017-04-20 Thread Harry Yingst via Elecraft


A few months ago I was itching for a big kit build so I picked up a K2 (I 
needed a winter project)
I took my time building it and adding in as many options as I could fit along 
with some mods.

I'm sitting here listening to it and I was thinking it sure is a nice sounding 
radio; while it may

not sound as full as the K3 (the K3 has wider filters) but the K2's audio is 
nice and clear.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the

2017-04-20 Thread Bill Mader
I picked up my registration packages earlier this afternoon Eric where I saw
the poster (still with wet ink).  Please put me on that list!

73, Bill, K8TE

Message: 17
Date: Thu, 20 Apr 2017 15:07:33 -0700
From: "Eric Swartz - WA6HHQ, Elecraft" 
To: KV5J , elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the
Visalia DX convention this weekend...
Message-ID: 
Content-Type: text/plain; charset=utf-8; format=flowed

The posting below is a little inaccurate.

If we are going to announce something like everyone is talking about, we are
not yet taking orders.

That said, we can put people on a notification list for when we will have
additional info and for when we will be taking orders for whatever we are
talking about.

73,

Eric
/elecraft.com/

On 4/20/2017 2:54 PM, KV5J via Elecraft wrote:
> I just called and pre-ordered one.  I'm 3rd. on the list! Better hurry.
>
>
>
> --

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread charlie carroll

well, and then there's... has it completed FCC testing?

73 charlie, k1xx

On 4/20/2017 8:50 PM, Ken Widelitz wrote:

And the only question that remains .


drum roll 


MSRP?


73,Ken, K6LA / VY2TT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@k1xx.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Ken Widelitz
And the only question that remains .


drum roll 


MSRP?


73,Ken, K6LA / VY2TT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Nr4c
Start a new desk. 

Sent from my iPhone
...nr4c. bill


> On Apr 20, 2017, at 7:25 PM, Harry Yingst via Elecraft 
>  wrote:
> 
> Is it the same size as the KPA500
> The way my desk is built I cannot go taller then the K3 is
> 
> 
>  From: Wayne Burdick 
> To: Clay Autery  
> Cc: elecraft@mailman.qth.net
> Sent: Thursday, April 20, 2017 7:12 PM
> Subject: Re: [Elecraft] If you're going to Visalia ...
> 
> 
> 
> Clay Autery  wrote:
>> 
>> Just sew in some fiberglass reinforcement straps...  :)
> 
> No need for that. The RF deck weighs only 22 pounds. 
> 
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Wayne Burdick
Matching 50-V regulated switching supply comes with it. Just 15 pounds. Roughly 
6’ cable; could be longer.

Wayne


> On Apr 20, 2017, at 5:12 PM, Phil Wheeler  wrote:
> 
> So what are the PS requirements, voltage and Amps, Wayne?
> 
> And, I guess the next question will be, will there be a matching power supply?
> 
> Phil W7OX
> 
> On 4/20/17 5:04 PM, Wayne Burdick wrote:
>> Tuner is internal.
>> 
>> W
>> 
>> 
>>> On Apr 20, 2017, at 4:19 PM, charlie carroll  wrote:
>>> 
>>> So, based on Wayne's last little snippet about weight, here's a few ideas 
>>> for everyone to toss around.
>>> 
>>> 1. It will have a separate power supply.  I'd estimate the weight for a 
>>> good 3kw switcher in the 10-12 lb area.
>>> 2. The tuner will be another separate unit.  No idea on a weight for this 
>>> one.
>>> 
>>> 73 charlie, k1xx
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Phil Wheeler
So what are the PS requirements, voltage and Amps, 
Wayne?


And, I guess the next question will be, will there 
be a matching power supply?


Phil W7OX

On 4/20/17 5:04 PM, Wayne Burdick wrote:

Tuner is internal.

W



On Apr 20, 2017, at 4:19 PM, charlie carroll  wrote:

So, based on Wayne's last little snippet about weight, here's a few ideas for 
everyone to toss around.

1. It will have a separate power supply.  I'd estimate the weight for a good 
3kw switcher in the 10-12 lb area.
2. The tuner will be another separate unit.  No idea on a weight for this one.

73 charlie, k1xx


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Wayne Burdick
Tuner is internal.

W


> On Apr 20, 2017, at 4:19 PM, charlie carroll  wrote:
> 
> So, based on Wayne's last little snippet about weight, here's a few ideas for 
> everyone to toss around.
> 
> 1. It will have a separate power supply.  I'd estimate the weight for a good 
> 3kw switcher in the 10-12 lb area.
> 2. The tuner will be another separate unit.  No idea on a weight for this one.
> 
> 73 charlie, k1xx
> 


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Harry Yingst via Elecraft
Is it the same size as the KPA500
The way my desk is built I cannot go taller then the K3 is


  From: Wayne Burdick 
 To: Clay Autery  
Cc: elecraft@mailman.qth.net
 Sent: Thursday, April 20, 2017 7:12 PM
 Subject: Re: [Elecraft] If you're going to Visalia ...
   


Clay Autery  wrote:
> 
> Just sew in some fiberglass reinforcement straps...  :)

No need for that. The RF deck weighs only 22 pounds. 




   
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread charlie carroll
So, based on Wayne's last little snippet about weight, here's a few 
ideas for everyone to toss around.


1. It will have a separate power supply.  I'd estimate the weight for a 
good 3kw switcher in the 10-12 lb area.
2. The tuner will be another separate unit.  No idea on a weight for 
this one.


73 charlie, k1xx


On 4/20/2017 6:25 PM, Wayne Burdick wrote:

No need for that. The RF deck weighs only 22 pounds.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Chuck Chandler
I work at a university. One day I asked around the Physical Plant if any of
the electricians did side jobs. One stopped by that afternoon and I
explained what I wanted. He quoted me a great price and the next day after
work he and another guy showed up. Less than 45 minutes later I plugged in
the amp.

It is amazing how quickly a pro can do the job. Sometimes it's worth the
money.

73 de Chuck, WS1L
On Thu, Apr 20, 2017 at 16:08 Ronnie Hull  wrote:

> Ted, LOL.  Don't let the dragons breathe on ya! Lots of Engineer wannabe's
> out there!
>
> Sent from my iPhone
>
> > On Apr 20, 2017, at 2:18 PM, Kevin - K4VD  wrote:
> >
> > Ya. Which bank to rob.
> >
> > :)
> >
> > Kev K4VD
> >
> >> On Thu, Apr 20, 2017 at 3:01 PM, Dauer, Edward 
> wrote:
> >>
> >> Guess I have to get an electrician to come out and give me another quote
> >> on a dedicated 240 VAC line to the shack.
> >>
> >> And all new baluns.
> >>
> >> And I have to check if the remote antenna switch relays are rated for
> more
> >> than 600 watts; if not, then replace that.
> >>
> >> Several hundreds of feet of coax to replace all of the ’58, right?
> >>
> >> Ferrite chokes and bypass caps on the external lighting around the
> house,
> >> and on the outside motion detectors.
> >>
> >> Anything I’ve left out?
> >>
> >> Ted, KN1CBR
> >>
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to ke...@k4vd.net
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to w5...@comcast.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to chandler...@gmail.com

-- 
Chuck

Sent from my iPhone

Chuck Chandler
chandler...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DXconvention this weekend...

2017-04-20 Thread Kevin Stover

Whatever you can get on E-Bay


On 4/20/2017 1:36 PM, Terry wrote:

Wow! What is the trade-in deal for the KPA500?

Terry, KQ5U


On 4/20/2017 1:21 PM, doug49...@gmail.com wrote:

Red led  1900
Red led  1700
Yellow led  1500
Green led  1300
Green led  1100
Green led  900

Doug  WD8Z

Sent from Mail for Windows 10

From: Wes Stewart
Sent: Thursday, April 20, 2017 2:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the 
Visailia DXconvention this weekend...


Sorry, you took too long.  I retired the previous QRO amp, bought a 
KPA500 and

ripped out the 240V service to the shack.

On 4/20/2017 9:50 AM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to doug49...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tmyers1...@sbcglobal.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to ksto...@ac0h.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Ron D'Eau Claire
Eric, you are better at that than White House spokesperson Mr. Spicer!

73, Ron AC7AC

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric
Swartz - WA6HHQ, Elecraft
Sent: Thursday, April 20, 2017 3:08 PM
To: KV5J; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia
DX convention this weekend...

The posting below is a little inaccurate.

If we are going to announce something like everyone is talking about, we are
not yet taking orders.

That said, we can put people on a notification list for when we will have
additional info and for when we will be taking orders for whatever we are
talking about.

73,

Eric
/elecraft.com/

On 4/20/2017 2:54 PM, KV5J via Elecraft wrote:
> I just called and pre-ordered one.  I'm 3rd. on the list! Better hurry.
>
>
>
> --


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Wayne Burdick


Clay Autery  wrote:
> 
> Just sew in some fiberglass reinforcement straps...  :)

No need for that. The RF deck weighs only 22 pounds. 




> __
> Clay Autery, KY5G
> 
>> On 4/20/2017 3:02 PM, Rose wrote:
>> I'd welcome some photos taken from all angles.
>> 
>> After all, many of you will want dust covers.  (;-)
>> 
>> Need a weight, though it's likely too heavy for a carrying case.
>> 
>> 73
>> 
>> Rose - N7HKW
>> elecraftcov...@gmail.com
>> 1-406-560-3738
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Eric Swartz - WA6HHQ, Elecraft

The posting below is a little inaccurate.

If we are going to announce something like everyone is talking about, we are not 
yet taking orders.


That said, we can put people on a notification list for when we will have 
additional info and for when we will be taking orders for whatever we are 
talking about.


73,

Eric
/elecraft.com/

On 4/20/2017 2:54 PM, KV5J via Elecraft wrote:

I just called and pre-ordered one.  I'm 3rd. on the list! Better hurry.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Another-really-good-reason-to-come-to-the-Visailia-DX-convention-this-weekend-tp7629555p7629631.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to eric.swa...@elecraft.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread KV5J via Elecraft
I just called and pre-ordered one.  I'm 3rd. on the list! Better hurry.



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Another-really-good-reason-to-come-to-the-Visailia-DX-convention-this-weekend-tp7629555p7629631.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Neil Zampella
OK ... I only have a KX3/KXPA100/PX3 setup, but I'm excited to see 
something like this .. and its 19 days after April 1st too !!


What I want to know is:

Will you LIVE STREAM (of any sort) the reveal, or will you keep the rest 
of us in the hinterland unable to attend in suspense because you can't 
email due to all the pre-orders you'll be taking ??



Neil Z.
KN3ILZ


On 4/20/2017 12:50 PM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] A little theory - speculation on new product?

2017-04-20 Thread Rick Stealey
  So let's all go

crazy and guess:

K4? KPA 1500?


Enhancements to the KX2.  Adding 160 and 6 meters.

Rick  K2XT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Bill Johnson
Eric, you are beginning to write like Wayne!  Here I thought you were the more 
serious of the two.

72 & 73,
Bill
K9YEQ, FT'er for K2, KX1, KX3, KXPA100,  KAT500, W2, etc. 
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Eric 
Swartz - WA6HHQ, Elecraft
Sent: Thursday, April 20, 2017 3:34 PM
To: Nr4c ; Terry Schieler 
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Ground rod through concrete thread?

We've found a new way to kill overdone threads /Visa//lia!/

Eric
/List Mooderator etc./
/elecraft.com/

On 4/20/2017 1:14 PM, Nr4c wrote:
> Maybe it "shorted" out!
>
>> On Apr 20, 2017, at 3:13 PM, Terry Schieler  wrote:
>>
>> POOF!  Hey what happened to the ground rod through concrete thread?  
>> ;o)
>>
>> Terry, W0FM
>>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to k9...@live.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Ronnie Hull
Ted, LOL.  Don't let the dragons breathe on ya! Lots of Engineer wannabe's out 
there!

Sent from my iPhone

> On Apr 20, 2017, at 2:18 PM, Kevin - K4VD  wrote:
> 
> Ya. Which bank to rob.
> 
> :)
> 
> Kev K4VD
> 
>> On Thu, Apr 20, 2017 at 3:01 PM, Dauer, Edward  wrote:
>> 
>> Guess I have to get an electrician to come out and give me another quote
>> on a dedicated 240 VAC line to the shack.
>> 
>> And all new baluns.
>> 
>> And I have to check if the remote antenna switch relays are rated for more
>> than 600 watts; if not, then replace that.
>> 
>> Several hundreds of feet of coax to replace all of the ’58, right?
>> 
>> Ferrite chokes and bypass caps on the external lighting around the house,
>> and on the outside motion detectors.
>> 
>> Anything I’ve left out?
>> 
>> Ted, KN1CBR
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ke...@k4vd.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w5...@comcast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Bruce Beford
 

That's excellent news Rose!

Enjoy each day as it comes!

73,

Bruce, N1RX

https://www.youtube.com/watch?v=OdvCqUguIh8

  _  

From: Rose [mailto:elecraftcov...@gmail.com] 
Sent: Thursday, April 20, 2017 4:58 PM
To: Bruce Beford; Elecraft Reflector
Subject: Re: [Elecraft] If you're going to Visalia ...

 

Hi Bruce!

 

Boy if I could be there you'd have a deal!

 

I was a regular in the Elecraft booth for a number of years, but both mine
and Ken's health keep us close to home these days.  The good news is that my
oncologist says I'm still "cancer-free".  (:-)

 

73!

 

Rose - N7HKW

 

On Apr 20, 2017 2:46 PM, "Bruce Beford"  wrote:

Be sure to wear some flowers in you hair.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Rose
Hi Bruce!

Boy if I could be there you'd have a deal!

I was a regular in the Elecraft booth for a number of years, but both mine
and Ken's health keep us close to home these days.  The good news is that
my oncologist says I'm still "cancer-free".  (:-)

73!

Rose - N7HKW

On Apr 20, 2017 2:46 PM, "Bruce Beford"  wrote:

> Be sure to wear some flowers in you hair.
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to elecraftcov...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Ron Wilcox
I was lucky when I put in my 240v for my kenwood 922 a couple of years ago,
a very good friend is a licensed electrician, would not let me pay him very
much, it always pays to be nice to everyone you know

Today is a good day to have a Great Day!
73   Ron Wilcox KF7ZN

On Thu, Apr 20, 2017 at 2:42 PM, Clay Autery  wrote:

> A 120VAC/20A circuit is appropriate for a lot of things  a 1500W HF
> amp is not one of them.
>
> Just do the 240 circuit...
>
> http://montac.com/images/shack_power/outlets.jpg
> https://www.dropbox.com/s/67hjpy126yr48sg/2016-08-28%2009.51.14.jpg?dl=0
> https://www.dropbox.com/s/16iflr76lvwe88c/2016-08-28%2018.19.38.jpg?dl=0
> https://www.dropbox.com/s/bkz0k60nzzsg1y0/2016-07-28%2018.29.45.jpg?dl=0
> https://www.dropbox.com/s/92jeckuevh9t8j2/2016-07-27%2015.28.52.jpg?dl=0
>
> Twisted pairs, steel conduit from service to sub, sub, to outlets,
> 240VAC/60A sub-panel, 8 x 120VAC/20A, 2 x 240VAC/15, 2 x 220VAC/20A
>
> Just find an electrician who will inspect/sign off on the work.
>
> __
> Clay Autery, KY5G
>
> On 4/20/2017 3:14 PM, Dauer, Edward wrote:
> > It might, but at typical efficiencies 1500W peak output would be a
> significant draw on the existing 117 VAC wiring – likely over 20 amps.
> With the K3/KPA500 as it is I get a just perceptible flicker in the room
> lights when keying.  With a dedicated 240 volt line I could also add a
> cooler for the drinks.
> >
> >
> >
> > Ted, KN1CBR
> >
> >
> > On 4/20/17, 1:53 PM, "Jeff"  wrote:
> >
> > Not so fast on the 240 VAC line Ted.  The single transistor SPE 1.3K
> will do
> > 1500 watts on 110v. It will be interesting to see if the Elecraft
> 1500w AMP
> > turns out to be a single transistor design...
> >
> > 73 Jeff kb2m
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rgloga...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Bruce Beford
Be sure to wear some flowers in you hair.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Clay Autery
A 120VAC/20A circuit is appropriate for a lot of things  a 1500W HF
amp is not one of them.

Just do the 240 circuit...

http://montac.com/images/shack_power/outlets.jpg
https://www.dropbox.com/s/67hjpy126yr48sg/2016-08-28%2009.51.14.jpg?dl=0
https://www.dropbox.com/s/16iflr76lvwe88c/2016-08-28%2018.19.38.jpg?dl=0
https://www.dropbox.com/s/bkz0k60nzzsg1y0/2016-07-28%2018.29.45.jpg?dl=0
https://www.dropbox.com/s/92jeckuevh9t8j2/2016-07-27%2015.28.52.jpg?dl=0

Twisted pairs, steel conduit from service to sub, sub, to outlets,
240VAC/60A sub-panel, 8 x 120VAC/20A, 2 x 240VAC/15, 2 x 220VAC/20A

Just find an electrician who will inspect/sign off on the work.

__
Clay Autery, KY5G

On 4/20/2017 3:14 PM, Dauer, Edward wrote:
> It might, but at typical efficiencies 1500W peak output would be a 
> significant draw on the existing 117 VAC wiring – likely over 20 amps.  With 
> the K3/KPA500 as it is I get a just perceptible flicker in the room lights 
> when keying.  With a dedicated 240 volt line I could also add a cooler for 
> the drinks.
>
>
>
> Ted, KN1CBR
>
>
> On 4/20/17, 1:53 PM, "Jeff"  wrote:
>
> Not so fast on the 240 VAC line Ted.  The single transistor SPE 1.3K will 
> do 
> 1500 watts on 110v. It will be interesting to see if the Elecraft 1500w 
> AMP 
> turns out to be a single transistor design...
> 
> 73 Jeff kb2m
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Jim Kutsch
No, it's not times that have changed; it's the sunspot cycle that has
changed. QRP for sunspot cycle peaks and QRO for all-time minimums.

73, Jim, KY2D


-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Kevin
Cozens
Sent: Thursday, April 20, 2017 4:01 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia
DX convention this weekend...

The K line started with QRP levels and now they may be up to a 1500W amp? 
How times have changed.

--
Cheers!

Kevin.

http://www.ve3syb.ca/   |"Nerds make the shiny things that distract
Owner of Elecraft K2 #2172  | the mouth-breathers, and that's why we're
 | powerful!"
#include  | --Chris Hardwick
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to jim.kut...@ky2d.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Eric Swartz - WA6HHQ, Elecraft

We've found a new way to kill overdone threads /Visa//lia!/

Eric
/List Mooderator etc./
/elecraft.com/

On 4/20/2017 1:14 PM, Nr4c wrote:

Maybe it "shorted" out!


On Apr 20, 2017, at 3:13 PM, Terry Schieler  wrote:

POOF!  Hey what happened to the ground rod through concrete thread?  ;o)

Terry, W0FM



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] K3 for Sale

2017-04-20 Thread Jim Vohland
I’ve like  to try something new for awhile and decided to sell my K3. Serial 
number #4354 and has the following options:
KPA3 100, KAT3 internal tuner, KDVR3 recorder, KFL3A 2.7 filter, KFL3A 6k 
filter, KIO3B board, power cable, Owners Manual and Assembly Manual and a bound 
copy of the owners manual.

Rig was back to Elecraft and checkup and had the gold pin updates. Also had the 
updated vfo know grip.  Clean bill of health and it works like it should. No 
issues at all and looks great. Giving first shot to the reflector before going 
on qth.

$2000 shipped to US only.

Sent from Mail for Windows 10

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Phil Hystad
I agree, changinging my mind, the numbers read out:  …, 900, 1100, 1300, 1500, 
1700, 1900.
> On Apr 20, 2017, at 1:14 PM, Phil Hystad  wrote:
> 
> The last four numbers that are clipped by the top region of the photo are all 
> four-digit numbers or so it appears.  But, I really looks like the first of 
> those four digit numbers is 1100 but the second of them looks most like 1000. 
>  However, the far right number does look like 1500 more than anything else 
> but the 3rd number (from the left) in the list could be 1300.  But, the 
> mystery is why does the first number look like 1100 when the second one looks 
> like 1000.
> 
> To read these, I blew up the photo image about a 4 or 5 time zoom level.
> 
> 73, phil, K7PEH
> 
>> On Apr 20, 2017, at 10:46 AM, Rick WA6NHC  wrote:
>> 
>> Well YOU designed it Wayne...  :-) What I'm seeing is a questionable 1700 as 
>> the second from the right, a vertical number on the right most (implies a 
>> 1), with an unclosed loop on the second digit on the right most that looks 
>> like the bottom half of a 5
>> 
>> 
>> Then add that the model number carefully only shows the xxx500, it appears 
>> to be a legal limit amp if pushed hard.
>> 
>> Rick nhc
>> 
>> (won't be in Visalia, packing to leave CA).
>> 
>> 
>> On 4/20/2017 10:22 AM, Wayne Burdick wrote:
>>> Isn’t that second red LED from the left labeled “1700”?
>>> 
>>> 
>>> 
 On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:
 
 Look closer, it clearly shows an output of 1 KW with a max red line at 
 1500 watts.
 
 Rick nhc
>>> 
>> On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:
>> 
>> http://www.elecraft.com/images/visalia1.jpg
>> 
>> Watch this space for further details :)
>> 
>> 73,
>> 
>> Wayne, N6KR
>> Eric, WA6HHQ
>> 
>> __
>>> 
>>> 
>>> 
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to phys...@mac.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to phys...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Paul Van Dyke
Hey Rose

Wait till you see the belt clip that is on it
Glad you are better .. miss seeing you doing backflips

Paul  KB9AVO

On Thu, Apr 20, 2017 at 4:02 PM, Rose  wrote:

> I'd welcome some photos taken from all angles.
>
> After all, many of you will want dust covers.  (;-)
>
> Need a weight, though it's likely too heavy for a carrying case.
>
> 73
>
> Rose - N7HKW
> elecraftcov...@gmail.com
> 1-406-560-3738
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pvandyke1...@gmail.com
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] If you're going to Visalia ...

2017-04-20 Thread Clay Autery
Just sew in some fiberglass reinforcement straps...  :)

__
Clay Autery, KY5G

On 4/20/2017 3:02 PM, Rose wrote:
> I'd welcome some photos taken from all angles.
>
> After all, many of you will want dust covers.  (;-)
>
> Need a weight, though it's likely too heavy for a carrying case.
>
> 73
>
> Rose - N7HKW
> elecraftcov...@gmail.com
> 1-406-560-3738

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Clay Autery
Without a doubt

__
Clay Autery, KY5G

On 4/20/2017 2:51 PM, Chris Tate - N6WM wrote:
> Im here..  with my checkbook.  I'm gonna get in trouble this weekend me 
> thinks ;-)
>
> Thanks
> ~C.
>
>> On Apr 20, 2017, at 9:51 AM, Wayne Burdick  wrote:
>>
>> http://www.elecraft.com/images/visalia1.jpg
>>
>> Watch this space for further details :)
>>
>> 73,
>>
>> Wayne, N6KR
>> Eric, WA6HHQ
>>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Phil Hystad
The last four numbers that are clipped by the top region of the photo are all 
four-digit numbers or so it appears.  But, I really looks like the first of 
those four digit numbers is 1100 but the second of them looks most like 1000.  
However, the far right number does look like 1500 more than anything else but 
the 3rd number (from the left) in the list could be 1300.  But, the mystery is 
why does the first number look like 1100 when the second one looks like 1000.

To read these, I blew up the photo image about a 4 or 5 time zoom level.

73, phil, K7PEH

> On Apr 20, 2017, at 10:46 AM, Rick WA6NHC  wrote:
> 
> Well YOU designed it Wayne...  :-) What I'm seeing is a questionable 1700 as 
> the second from the right, a vertical number on the right most (implies a 1), 
> with an unclosed loop on the second digit on the right most that looks like 
> the bottom half of a 5
> 
> 
> Then add that the model number carefully only shows the xxx500, it appears to 
> be a legal limit amp if pushed hard.
> 
> Rick nhc
> 
> (won't be in Visalia, packing to leave CA).
> 
> 
> On 4/20/2017 10:22 AM, Wayne Burdick wrote:
>> Isn’t that second red LED from the left labeled “1700”?
>> 
>> 
>> 
>>> On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:
>>> 
>>> Look closer, it clearly shows an output of 1 KW with a max red line at 1500 
>>> watts.
>>> 
>>> Rick nhc
>> 
> On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:
> 
> http://www.elecraft.com/images/visalia1.jpg
> 
> Watch this space for further details :)
> 
> 73,
> 
> Wayne, N6KR
> Eric, WA6HHQ
> 
> __
>> 
>> 
>> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to phys...@mac.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Nr4c
Maybe it "shorted" out!

Sent from my iPhone
...nr4c. bill


> On Apr 20, 2017, at 3:13 PM, Terry Schieler  wrote:
> 
> POOF!  Hey what happened to the ground rod through concrete thread?  ;o)
> 
> Terry, W0FM
> 
> 
> -Original Message-
> From: brian [mailto:als...@comcast.net] 
> Sent: Thursday, April 20, 2017 1:35 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Another really good reason to come to the Visailia
> DXconvention this weekend...
> 
> Nobody is speculating about price.
> 2.5X KPA500 ?
> 3X KPA500 ?
> 3X KPA500 + .75 KAT500?
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Dauer, Edward
It might, but at typical efficiencies 1500W peak output would be a significant 
draw on the existing 117 VAC wiring – likely over 20 amps.  With the K3/KPA500 
as it is I get a just perceptible flicker in the room lights when keying.  With 
a dedicated 240 volt line I could also add a cooler for the drinks.



Ted, KN1CBR


On 4/20/17, 1:53 PM, "Jeff"  wrote:

Not so fast on the 240 VAC line Ted.  The single transistor SPE 1.3K will 
do 
1500 watts on 110v. It will be interesting to see if the Elecraft 1500w AMP 
turns out to be a single transistor design...

73 Jeff kb2m

-Original Message- 
From: Dauer, Edward
Sent: Thursday, April 20, 2017 3:01 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Another really good reason to come to the Visailia DX 
convention this weekend...

Guess I have to get an electrician to come out and give me another quote on 
a dedicated 240 VAC line to the shack.

And all new baluns.

And I have to check if the remote antenna switch relays are rated for more 
than 600 watts; if not, then replace that.

Several hundreds of feet of coax to replace all of the ’58, right?

Ferrite chokes and bypass caps on the external lighting around the house, 
and on the outside motion detectors.

Anything I’ve left out?

Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@arrl.net 


---
This email has been checked for viruses by AVG.
http://www.avg.com



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Wes Stewart

So has propagation.

On 4/20/2017 1:00 PM, Kevin Cozens wrote:
The K line started with QRP levels and now they may be up to a 1500W amp? How 
times have changed.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Fred Jensen
Does anyone [except Wayne, Eric, and a few engineers] actually know 
that, or are we just kicking around "alternative facts?"


73,

Fred ("Skip") K6DGW
Sparks NV USA
Washoe County DM09dn

On 4/20/2017 1:00 PM, Kevin Cozens wrote:
The K line started with QRP levels and now they may be up to a 1500W 
amp? How times have changed.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread efortner
If you have to ask, you probably can't afford it.

Earl, K4KAY

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Terry
Schieler
Sent: Thursday, April 20, 2017 3:14 PM
To: 'brian'; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Ground rod through concrete thread?

POOF!  Hey what happened to the ground rod through concrete thread?  ;o)

Terry, W0FM


-Original Message-
From: brian [mailto:als...@comcast.net] 
Sent: Thursday, April 20, 2017 1:35 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia
DXconvention this weekend...

Nobody is speculating about price.
2.5X KPA500 ?
3X KPA500 ?
3X KPA500 + .75 KAT500?


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to efort...@ctc.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] If you're going to Visalia ...

2017-04-20 Thread Rose
I'd welcome some photos taken from all angles.

After all, many of you will want dust covers.  (;-)

Need a weight, though it's likely too heavy for a carrying case.

73

Rose - N7HKW
elecraftcov...@gmail.com
1-406-560-3738
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Jim Miller
Credit card cleaned, lubed, locked and loaded!!

Woot!!!

Jim ab3cv

On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to j...@jtmiller.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Kevin Cozens
The K line started with QRP levels and now they may be up to a 1500W amp? 
How times have changed.


--
Cheers!

Kevin.

http://www.ve3syb.ca/   |"Nerds make the shiny things that distract
Owner of Elecraft K2 #2172  | the mouth-breathers, and that's why we're
| powerful!"
#include  | --Chris Hardwick
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] I think Doug WD8Z is correct

2017-04-20 Thread Rob Monsipapa via Elecraft
Dam..  I just bought the KPA500, now it's going to drop like a rock and the 
move up to the 1500 is going to cost, well, I still have the right n#t to sell 
off.  

Rob AK7RM

Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Jeff
Not so fast on the 240 VAC line Ted.  The single transistor SPE 1.3K will do 
1500 watts on 110v. It will be interesting to see if the Elecraft 1500w AMP 
turns out to be a single transistor design...


73 Jeff kb2m

-Original Message- 
From: Dauer, Edward

Sent: Thursday, April 20, 2017 3:01 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Another really good reason to come to the Visailia DX 
convention this weekend...


Guess I have to get an electrician to come out and give me another quote on 
a dedicated 240 VAC line to the shack.


And all new baluns.

And I have to check if the remote antenna switch relays are rated for more 
than 600 watts; if not, then replace that.


Several hundreds of feet of coax to replace all of the ’58, right?

Ferrite chokes and bypass caps on the external lighting around the house, 
and on the outside motion detectors.


Anything I’ve left out?

Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@arrl.net 



---
This email has been checked for viruses by AVG.
http://www.avg.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Chris Tate - N6WM
Im here..  with my checkbook.  I'm gonna get in trouble this weekend me thinks 
;-)

Thanks
~C.

> On Apr 20, 2017, at 9:51 AM, Wayne Burdick  wrote:
> 
> http://www.elecraft.com/images/visalia1.jpg
> 
> Watch this space for further details :)
> 
> 73,
> 
> Wayne, N6KR
> Eric, WA6HHQ
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ct...@ewnetinc.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Matt Zilmer

100% of everyone's attention units were diverted.

73,

matt W6NIA


On 4/20/2017 12:13 PM, Terry Schieler wrote:

POOF!  Hey what happened to the ground rod through concrete thread?  ;o)

Terry, W0FM


-Original Message-
From: brian [mailto:als...@comcast.net]
Sent: Thursday, April 20, 2017 1:35 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia
DXconvention this weekend...

Nobody is speculating about price.
2.5X KPA500 ?
3X KPA500 ?
3X KPA500 + .75 KAT500?


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to mzil...@roadrunner.com


--
"A delay is better than a disaster."
-- unknonwn

Matt Zilmer, W6NIA
[Shiraz]

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Clay Autery
Just so you know  you CAN do all the work yourself, save a bundle,
AND get it constructed precisely the way YOU want it.

All the rest of that just gives you some fun stuff to do

There is ALWAYS one more thing you can do...  ;)

73,

__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 4/20/2017 2:01 PM, Dauer, Edward wrote:
> Guess I have to get an electrician to come out and give me another quote on a 
> dedicated 240 VAC line to the shack.
>
> And all new baluns.
>
> And I have to check if the remote antenna switch relays are rated for more 
> than 600 watts; if not, then replace that.
>
> Several hundreds of feet of coax to replace all of the ’58, right?
>
> Ferrite chokes and bypass caps on the external lighting around the house, and 
> on the outside motion detectors.
>
> Anything I’ve left out?
>
> Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Mark Bayern
hmmm ... saw (and laid hands on) something like this in 2006. Maybe
Elecraft will actually sell it this time?

Mark  AD5SS





On Thu, Apr 20, 2017 at 11:50 AM, Wayne Burdick  wrote:
> http://www.elecraft.com/images/visalia1.jpg
>
> Watch this space for further details :)
>
> 73,
>
> Wayne, N6KR
> Eric, WA6HHQ
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to plcm...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Clay Autery
I stand corrected...  :)

Still legal limit with headroom only way Elecraft would do it.

__
Clay Autery, KY5G

On 4/20/2017 1:42 PM, Mike Harris wrote:
> Decreasing by 200 each second led to the left. Makes 100W per led
> starting at 100.
>
> Regards,
>
> Mike VP8NO
>
> On 20/04/2017 15:29, Clay Autery wrote:
>> Yep...  top LED 1900, decreasing by 200 each LED descending to the left
>> of the photo.
> __

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DXconvention this weekend...

2017-04-20 Thread Clay Autery
Don't really care...  Just hope we are allowed to assemble them.

While investigating the construction of an amp and power supply that
would do legal limit and integrate adequately with a K3s, et al., I
discovered that it probably could not be done for less than $6K+
assuming no need to buy tooling, etc.  Likely some bit more to do it
"right".

__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 4/20/2017 1:34 PM, brian wrote:
> Nobody is speculating about price.
> 2.5X KPA500 ?
> 3X KPA500 ?
> 3X KPA500 + .75 KAT500?
>
> Alternatively, zero and it is an April Fools Joke.
> Brian/K3KO

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Another really good reason to come to the Visailia DX conve ntion this weekend...

2017-04-20 Thread John AE5X
What will a KX2 drive it to (pardon the grammar)?

John AE5X
http://ae5x.blogspot.com/
 
 


Actress Maggie Q Shocks With Her Solution To Tummy Troubles
activatedyou.com
http://thirdpartyoffers.juno.com/TGL3131/58f90bf3c552bf27015st04vuc
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread James Wilson
Wayne,

Clever !

You're a genius.

Jim - W4RKS
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Ian Kahn
Eric/Wayne,

I think this constitutes cruel and unusual punishment! 

73 de,

Ian, KM4IK


On Apr 20, 2017 12:52 PM, "Wayne Burdick"  wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to km4ik@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Brian & Cyndi

If WAYNE is promoting this, it must be a keyer, and 1500 is the dit rate.

73,

Brian, W6FVI


On 4/20/2017 9:50 AM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w6...@sbcglobal.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Kevin - K4VD
Ya. Which bank to rob.

:)

Kev K4VD

On Thu, Apr 20, 2017 at 3:01 PM, Dauer, Edward  wrote:

> Guess I have to get an electrician to come out and give me another quote
> on a dedicated 240 VAC line to the shack.
>
> And all new baluns.
>
> And I have to check if the remote antenna switch relays are rated for more
> than 600 watts; if not, then replace that.
>
> Several hundreds of feet of coax to replace all of the ’58, right?
>
> Ferrite chokes and bypass caps on the external lighting around the house,
> and on the outside motion detectors.
>
> Anything I’ve left out?
>
> Ted, KN1CBR
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ke...@k4vd.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Ground rod through concrete thread?

2017-04-20 Thread Terry Schieler
POOF!  Hey what happened to the ground rod through concrete thread?  ;o)

Terry, W0FM


-Original Message-
From: brian [mailto:als...@comcast.net] 
Sent: Thursday, April 20, 2017 1:35 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia
DXconvention this weekend...

Nobody is speculating about price.
2.5X KPA500 ?
3X KPA500 ?
3X KPA500 + .75 KAT500?


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DXconvention this weekend...

2017-04-20 Thread AJ8MH-Radio.Joe.Hutchens

Should have a contest...get the price correct and you win one.

$5995.00 for 1KW + $1000 for tuner

$8995.00 for 1.5KW + $1.5K for tuner

These are show disconnected prices.

73,
Joe ( AJ8MH-Radio )

On 4/20/2017 2:34 PM, brian wrote:

Nobody is speculating about price.
2.5X KPA500 ?
3X KPA500 ?
3X KPA500 + .75 KAT500?



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Dauer, Edward
Guess I have to get an electrician to come out and give me another quote on a 
dedicated 240 VAC line to the shack.

And all new baluns.

And I have to check if the remote antenna switch relays are rated for more than 
600 watts; if not, then replace that.

Several hundreds of feet of coax to replace all of the ’58, right?

Ferrite chokes and bypass caps on the external lighting around the house, and 
on the outside motion detectors.

Anything I’ve left out?

Ted, KN1CBR

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Mike Harris
Decreasing by 200 each second led to the left. Makes 100W per led 
starting at 100.


Regards,

Mike VP8NO

On 20/04/2017 15:29, Clay Autery wrote:

Yep...  top LED 1900, decreasing by 200 each LED descending to the left
of the photo.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Another really good reason to come to the Visailia DXconvention this weekend...

2017-04-20 Thread Terry

Wow!  What is the trade-in deal for the KPA500?

Terry, KQ5U


On 4/20/2017 1:21 PM, doug49...@gmail.com wrote:

Red led  1900
Red led  1700
Yellow led  1500
Green led  1300
Green led  1100
Green led  900

Doug  WD8Z

Sent from Mail for Windows 10

From: Wes Stewart
Sent: Thursday, April 20, 2017 2:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia 
DXconvention this weekend...

Sorry, you took too long.  I retired the previous QRO amp, bought a KPA500 and
ripped out the 240V service to the shack.

On 4/20/2017 9:50 AM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to doug49...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to tmyers1...@sbcglobal.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DXconvention this weekend...

2017-04-20 Thread brian

Nobody is speculating about price.
2.5X KPA500 ?
3X KPA500 ?
3X KPA500 + .75 KAT500?

Alternatively, zero and it is an April Fools Joke.
Brian/K3KO
On 4/20/2017 18:21 PM, doug49...@gmail.com wrote:

Red led  1900
Red led  1700
Yellow led  1500
Green led  1300
Green led  1100
Green led  900

Doug  WD8Z

Sent from Mail for Windows 10

From: Wes Stewart
Sent: Thursday, April 20, 2017 2:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia 
DXconvention this weekend...

Sorry, you took too long.  I retired the previous QRO amp, bought a KPA500 and
ripped out the 240V service to the shack.

On 4/20/2017 9:50 AM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to doug49...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to als...@comcast.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Clay Autery
Yep...  top LED 1900, decreasing by 200 each LED descending to the left
of the photo.

__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 4/20/2017 1:26 PM, Ed Muns wrote:
> Or, 1900.
>
> 73,
> Ed W0YK
> On Apr 20, 2017 10:42 AM, Rick WA6NHC  wrote:
>> It can't be... the curl on the second digit, right most number, implies 
>> 1500.
>>
>> On 4/20/2017 10:22 AM, Wayne Burdick wrote:
>>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Clay Autery
I REALLY, REALLY hope that it does NOT contain an internal power supply,
but I fear that it will.

It doesn't matter...  not a deal killer.

Just take my money  I'm so glad I delayed a little building my own
(though I'll still be building my own).

73,

__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 4/20/2017 1:09 PM, M0VFC wrote:
> But how much is the table bending under the weight? Switch-mode PSU, I hope?
>
> Fingers crossed :-)
>
> 73,
> Rob, M0VFC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Ed Muns
Or, 1900.

73,
Ed W0YK
On Apr 20, 2017 10:42 AM, Rick WA6NHC  wrote:
>
> It can't be... the curl on the second digit, right most number, implies 
> 1500.
>
> On 4/20/2017 10:22 AM, Wayne Burdick wrote:
> > Isn’t that second red LED from the left labeled “1700”?
> >
> >
> >
> >> On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:
> >>
> >> Look closer, it clearly shows an output of 1 KW with a max red line at 
> >> 1500 watts.
> >>
> >> Rick nhc
> >
>  On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:
> 
>  http://www.elecraft.com/images/visalia1.jpg
> 
>  Watch this space for further details :)
> 
>  73,
> 
>  Wayne, N6KR
>  Eric, WA6HHQ
> 
>  __
> >
> >
> >
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to e...@w0yk.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DXconvention this weekend...

2017-04-20 Thread doug49707
Red led  1900
Red led  1700
Yellow led  1500
Green led  1300
Green led  1100
Green led  900

Doug  WD8Z

Sent from Mail for Windows 10

From: Wes Stewart
Sent: Thursday, April 20, 2017 2:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia 
DXconvention this weekend...

Sorry, you took too long.  I retired the previous QRO amp, bought a KPA500 and 
ripped out the 240V service to the shack.

On 4/20/2017 9:50 AM, Wayne Burdick wrote:
> http://www.elecraft.com/images/visalia1.jpg
>
> Watch this space for further details :)
>
> 73,
>
> Wayne, N6KR
> Eric, WA6HHQ
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wes_n...@triconet.org
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to doug49...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] A little theory - speculation on new product?

2017-04-20 Thread Buck
I was thinking the same thing yesterday.  Something is brewing in the 
Elecraft skunk works and they're getting it ready for Dayton.  That is 
keeping Wayne and Eric too busy to play moderator.  So let's all go 
crazy and guess:


K4? KPA 1500?

Buck, k4ia
Honor Roll
8BDXCC
EasyWayHamBooks.com

On 4/20/2017 12:06 PM, Terry Schieler wrote:

Good point.  Here is my "theory" on this OT overload thing, Ron.  When the
Off Topic contents of the posts become so frequent and overbearing, there
appears to be a direct correlation with a void in new product announcements
from the boys at Elecraft, which normally incite On Topic comments that fill
this space.  Perhaps there is something looming on the horizon.  ;o)

73,  Terry  WØFM



-Original Message-
From: Ron D'Eau Claire [mailto:r...@cobi.biz]
Sent: Tuesday, April 18, 2017 9:45 PM
To: kev...@coho.net; elecraft@mailman.qth.net; 'QRP-L Mailing List'
Subject: Re: [Elecraft] A little theory

I forgot to add, if you have any comments, let us take them off the Elecraft
list. The OT Traffic here has been FIERCE  lately, Hi!

73, Ron AC7AC


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to radiok...@gmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Wes Stewart
Sorry, you took too long.  I retired the previous QRO amp, bought a KPA500 and 
ripped out the 240V service to the shack.


On 4/20/2017 9:50 AM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread M0VFC
But how much is the table bending under the weight? Switch-mode PSU, I hope?

Fingers crossed :-)

73,
Rob, M0VFC



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Another-really-good-reason-to-come-to-the-Visailia-DX-convention-this-weekend-tp7629555p7629580.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Bill Johnson
Rick, but logic would indicate this is a 1500 watter.  Otherwise, the 500 would 
only be 000

73,
Bill
K9YEQ

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rick 
WA6NHC
Sent: Thursday, April 20, 2017 12:11 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Another really good reason to come to the Visailia DX 
convention this weekend...

Look closer, it clearly shows an output of 1 KW with a max red line at
1500 watts.

Rick nhc


On 4/20/2017 9:52 AM, Buddy Brannan wrote:
> How totally unfair! A picture is worth 0 words!
>
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: 814-860-3194
> Mobile: 814-431-0962
> Email: bu...@brannan.name
>
>
>
>
>> On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:
>>
>> http://www.elecraft.com/images/visalia1.jpg
>>
>> Watch this space for further details :)
>>
>> 73,
>>
>> Wayne, N6KR
>> Eric, WA6HHQ
>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> bu...@brannan.name
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> wa6...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to k9...@live.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Rick WA6NHC

So now the standard questions are:

Matching KAT1500 (internal) tuner?   With the same 10:1 range as the 
KAT500?


Price(s)?

Availability?

Very cleverly done Wayne, kudos.  No I don't have to be concerned with 
mixing/matching amps to the K line.  Nice!


Rick nhc



On 4/20/2017 10:22 AM, Wayne Burdick wrote:

Isn’t that second red LED from the left labeled “1700”?




On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:

Look closer, it clearly shows an output of 1 KW with a max red line at 1500 
watts.

Rick nhc



On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Bill Johnson
And note the different TX button than on the 500! At the top of the photo note 
that the last 5 parts of numbers visible are all 4 digit labels so my guess is 
that here comes the 1500 watt amp for viewing.  Note the feet are not bail 
type.  Either a working prototype or a new release.  

73,
Bill
K9YEQ

-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wayne 
Burdick
Sent: Thursday, April 20, 2017 12:23 PM
To: Rick WA6NHC 
Cc: Elecraft Reflector 
Subject: Re: [Elecraft] Another really good reason to come to the Visailia DX 
convention this weekend...

Isn’t that second red LED from the left labeled “1700”?



> On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:
> 
> Look closer, it clearly shows an output of 1 KW with a max red line at 1500 
> watts.
> 
> Rick nhc
>> 


>>> On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:
>>> 
>>> http://www.elecraft.com/images/visalia1.jpg
>>> 
>>> Watch this space for further details :)
>>> 
>>> 73,
>>> 
>>> Wayne, N6KR
>>> Eric, WA6HHQ
>>> 
>>> __




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message 
delivered to k9...@live.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Bob

Nice cropping on the JPG

Cut off maybe a 1 and some output values.

While waiting I'll check my checking account balance.

73,
Bob
K2TK ex KN2TKR (1956) & K2TKR


On 4/20/2017 12:50 PM, Wayne Burdick wrote:

http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Rick WA6NHC
I could see that, it depends on the font (none of the exiting K line 
displays a 9) it lets the other numbers that are ALMOST shown 
(clever) make more sense.  If that is the case, it's showing full legal 
(US) limit output with room to spare.



Woohoo!  An Elecraft legal limit amp!  The KPA1500 lives again! I still 
hope for a matching (if not internal but doubtful) tuner with the same 
range as the KAT500, but on the other hand, if one is running THAT much 
energy, a resonant antenna is a little more critical need.


Rick


On 4/20/2017 10:46 AM, Ross Primrose wrote:

No, more like 1900...

73, Ross N4RP

On 4/20/2017 1:42 PM, Rick WA6NHC wrote:
It can't be... the curl on the second digit, right most number, 
implies 1500.



On 4/20/2017 10:22 AM, Wayne Burdick wrote:

Isn’t that second red LED from the left labeled “1700”?




On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:

Look closer, it clearly shows an output of 1 KW with a max red line 
at 1500 watts.


Rick nhc


On Apr 20, 2017, at 12:50 PM, Wayne Burdick  
wrote:


http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n4rp.com





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Nr4c
Da!  They've done it again!

Sent from my iPhone
...nr4c. bill


> On Apr 20, 2017, at 12:50 PM, Wayne Burdick  wrote:
> 
> http://www.elecraft.com/images/visalia1.jpg
> 
> Watch this space for further details :)
> 
> 73,
> 
> Wayne, N6KR
> Eric, WA6HHQ
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


Re: [Elecraft] Another really good reason to come to the Visailia DX convention this weekend...

2017-04-20 Thread Ross Primrose

No, more like 1900...

73, Ross N4RP

On 4/20/2017 1:42 PM, Rick WA6NHC wrote:
It can't be... the curl on the second digit, right most number, 
implies 1500.



On 4/20/2017 10:22 AM, Wayne Burdick wrote:

Isn’t that second red LED from the left labeled “1700”?




On Apr 20, 2017, at 10:11 AM, Rick WA6NHC  wrote:

Look closer, it clearly shows an output of 1 KW with a max red line 
at 1500 watts.


Rick nhc


On Apr 20, 2017, at 12:50 PM, Wayne Burdick  
wrote:


http://www.elecraft.com/images/visalia1.jpg

Watch this space for further details :)

73,

Wayne, N6KR
Eric, WA6HHQ

__






__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@n4rp.com



--
FCC Section 97.313(a) “At all times, an amateur station must use the minimum 
transmitter power necessary to carry out the desired communications.”

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

  1   2   >