Re: [Elecraft] KX3 heatsink
Hi, This was over on the KX3 Yahoo group http://www.bigskyspaces.com/w7gj/KX3HeatSinks.htm Calvin KA7MAY On Nov 19, 2012, at 10:36 AM, Niel Skousen nskou...@talisman-intl.com wrote: I recall someone posting a heatsink that they'd done for the KX3, and were intending to provide an aftermarket heatsink to the group.Can anyone forward me a link or email address to follow up with ? Thanks Niel __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA 100 Test Question
Hi, 'S1 nr nt ' is the display from the DSP board when it is installed. I am in the process of building the KPA100 right now. Calvin KA7MAY K2# 7239 On Nov 10, 2012, at 8:12 PM, kevinemtid @tvcconnect.net kevinem...@tvcconnect.net wrote: Hi Folks, I am testing a newly built KPA 100 with my K2. Upon power up, I hit the Display key and get the following: Elecraft (normal message) then S1 nr nt. Can anyone tell me what this means? Is this supposed to be a trouble shooting code 51? I would like to know before I proceed any further in my testing. Thanks and 73, Kevin NZ1I K2 # 7362 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2: Modulation on CW signal
Hello, First time posting to the list. Completed K2 #7239 today. Made a contact with a station on cw, 10 watts, 7.1065 mhz. He reported back that my CW signal had a very heavy ripple on the signal. I connected the output to a Oscilloscope and was able to see a ripple on the waveform when keying a solid carrier at a few watts. Also listened to my signal on another receiver and could hear a very bad modulated CW tone. This is a barebones K2 with no options installed at this point. Every measurement in the testing was all within specs and the alignment of the radio had no problems. Power output on all bands was OK. Thanks for any help in correcting this problem. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
