[Elecraft] FS: K2/100 And Accessories
One more time, then it is on to e-Bay K2/100 160-10M Transceiver KDSP2 DSP KNB2 Noise Blanker KSB2 SSB adapter K160RX module KPA-100 power amplifier KAT100 Antenna Tuner MFJ 1279 Sound Card Interface Documentation and Interconnect Cabling This equipment can be viewed at http://bellsouth.net/p/PWP-W4ATK Contact me off-list please with your best offer at [EMAIL PROTECTED] or by phone at (205) 982-9466. Thank You, 73, Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: K2/1000 And Accessories (Corrected URL)
One more time, then it is on to e-Bay K2/100 160-10M Transceiver KDSP2 DSP KNB2 Noise Blanker KSB2 SSB adapter K160RX module KPA-100 power amplifier KAT100 Antenna Tuner MFJ 1279 Sound Card Interface Documentation and Interconnect Cabling This equipment can be viewed at http://www.home.bellsouth.net/p/PWP-W4ATK Contact me off-list please with your best offer at [EMAIL PROTECTED] or by phone at (205) 982-9466. Thank You, 73, Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] For Sale K2/100 and accessories
I have for sale the following items. K2/100 (s/n 4028 fully upgraded) with KNB2, KDSP2, KSB2, K160RX KAT100 K2 Top Cover with KIO2. EC2 enclosure with KAT100 panels MFJ 1279 sound card interface This equipment has been in continuous use since built. It is with mixed emotions that I part with my venerable K2 but living in a garden home does present issues of space and a happy XYL.G I got to buy a new computer and a new radio (SDR-1000)...Whe! $1400 shipped in CONUS. I will consider selling individual items as listed (excluding K2 modules). The equipment islocated in Hoover, AL near Birmingham. Please contact me off list if interested. E-mail [EMAIL PROTECTED] Phone (205) 982-9466. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: K2 for sale and accessories
Nosey Nick wrote: Didn't you start an international incident last time you tried to sell this? :-) Gee-mny Christmas Nick, I had hoped everyone had forgotten that! Maybe things will go better with our VE friends this time as I have not excluded sales to Canada FB on looking forward to SDR. I did a presentation to our local DX club and I think I sold myself on it more than anyone else. I think we will see a lot of vendors get on that bandwagon pretty quick. But for most of our fraternity, it is probably not plug and play yet, at least that is what I get from the reviews (QST etc.)and Flex-Radio. But, I like to be out front, on the cutting edge, and sometimes I have experienced injuries from sharp objects. 73 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ARCI Summer Sprint
Are the bands that dead? I know I live in the land of NO rf, but this is ridiculous. What time does the band show up so the crowds will come? Jim ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Spectran Vers 2
If you have not looked at this free program, you should. It gives you a conventional audio spectrum display and a nice waterfall to boot. Controls are easy, adjustable on the fly. Plus the site has a lot of nifty software for SDR applications. www.weaksignals.com Speaking of SDR, how about a neat Rx front end designed for SDR, 10KHz to 30MHz, uses the AD9951 DDS, IF output is 12KHz, just right for your sound card. Price is EU 250. www.sdradio.org 73 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2/100 no DSP Menu
When I fired up the K2 today, it was all confused and I had to do a 4-5-6 reset. After the reset I could get no DSP menu so I removed the KDSP and jumpered the audio lines in order to do the CAL FIL. At that time when I pressed the AFIL switch I got a not installed message as I should. After the CAL PLL, and CAL FIL operations, and putting everything back together I tapped DISPLAY to get the KDSP menu and no luck. Just Frequency and Voltage and Current. Activating the AFIL switch cycles me thru CF1 thru CF4 as expected. Ideas anyone? Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: FS K2-Twins
The twins are no longer for sale. Actually, I repented and decided that I really did not want that SuperBlooper 1 (actual brand and model withheld) with which I could not have near as much fun trying to get 10Watts out on 10 Meters(anybody else been there? A friend pointed out I just turn on the KPA100.) The SuperBlooper did however have a very high KPD factor. (For the un-initiated and ill-informed the KPD factor is calculated as absPrice/knobcount, sometimes referred to as knobs per dollar). I shall also apologize to the group for my post causing somewhat of an international incident. Really, the very nice VE gentleperson's comments were well intentioned I am sure, and I take no offense. I was, however, also honored to have a fellow country-man rise to my defense on the matter. With that I shall close 73 to all, Jim, W4ATK Still the proud owner of K2 #4028, lest any should doubt my loyalty. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: K2 Study
Oh good grief. I left that off Don. Thanks for bringing that to my attention. As per the K2 documentation (RF signal tracing) make your measurements at 2.0 watts requested power. Chalk that up as a senior moment. I seem to be having a lot of those lately. Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: Elecraft K - Twins
I have for sale the following: K2 s/n 4028 full power thru 12M, 8W on 10M into 50 ohm dummy load. latest revision software. KSB2 K160RX KIO2 KNB2 KDSP2 KPA100(w/upgrades)/KAT100 in EC2 enclosure(includes interconnecting cables). $1750 to Continental US only. Contact me off reflector if interested. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 BPF insertion losses.
Has anyone checked the K2 BPF insertion losses per band and perhaps made note of them? 73, Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Wish List and/or Modification
http://www.mouser.com/?handler=data.listcategoryNe=200terms=binding+posts; Ntt=*binding*%2b*posts*crc=falseNs=SFieldN=1620 Glad I could help. 73 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ATU/Tuner
Paul, I have had both the LDG and the Elecraft ATUs. For my money I would chose the Elecraft KAT100. The KAT100 in the standard casing is low profile and is a great unit. I used that setup here for quite a while and then opted to put the KPA100 and KAT100 in an EC2 case (know in the fraternity as K-Twins). Now I can split the two up and have a 10W rig for travel or the QRO rig here at home for those rare DX contacts.G 73 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] What antenna should I build?
Gee, I live in a restricted neighborhood and I could not be happier with my 40M off center fed dipole I have stapled to the ridgepole in my garden home. I mounted a 4:1 balun at the feed point and fed it with 1/2 wavelength of coax. It works 80 thru 10 meters and is easily tuned with my KAT100 to 1:1 on 40 thru 10 and 1.2:1 on 80M. Moving from band to band changes the radiation pattern and on 20M, it has a pipeline into Europe and the Middle East. Made some nice contacts on the K2 alone, I very seldom QRO up to the big gun, the KPA100. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Let me see
Where do I go next? I just finished a K2 for a friend. I am the proud owner of a K2 (4028) and I have had my eye on a KX1 for quite some time. I would be interested in hearing from other K2 owners that also own KX1s. I feel like it is going to be either a KX1 or another K2. I like the portability of the KX1, but boy I love the outstanding performance of my K2. What say guys? Help me out here. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:Let me see.....Revisited
Whoa Guys, I would never ever give up my K2. I am just trying to decide if I want another K2, or maybe this time a KX1. I love to build and the Elecraft kits certainly fill that bill (or should I say build. ouch, that's a bad pun indeed). You see, I also want a W7ZOI spec analyzer, a couple of KK7B's super recievers and the list goes on and on. What a delimna! So many things and being past 70, how can one get it all done? G And I promised the XYL I would get back to my art endeavors, do a few more landscapes and lighthouses. Oh! the pain of it all.. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Low power out on 10M
Yeah, I know this subject has been kicked around for a while, but none the less. When I built the K2, I had no trouble getting the 10W out on 10M. 1) I have rewound T2 and elevated it above the board 1/16 inch. 2) Band Power at W6 Measured output. 20 -33 DBM 2.0 WATTS 10 -29.3 DBM 2.0 WATTS From the above measurements it seems that at this level the drive at W6 and the power out of the Low Pass filter at the antenna connection are tracking fairly well. 3) Band Power at W6 Measured output. 20 -26.3 DBM 10W 10 -26.7 DBM 5W The drive is still up there, but whoa nellie! What happened to the output? This is where 10M flattens out. You can ask for more power, but it just isn't there. Back in the old days, I would start replacing empty state devicesG. I have checked the components around the 10/12M Low Pass Filter and all seem correct. Anybody seen this and got a suggestion.? Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] W2W
Anyone know the scoop on W2W? He doesn't show up on QRZ, but is attracting a lot of attention on 14026 this a.m. 73 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: W2W
Thanks for all the replies. Worked him this a.m. and just did not know what the event was. I should remember D-Day, I was about 9 at the time I believe. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] WB3AAL on the AT working TAC Sprint
Caught Ron up on 14059.9 a few minutes ago. Nice signal here in Alabama. 73 Jim ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 Mojo
I have worked YX0LIX on 10, 12, 17 meters on an attic off center fed 40M dipole. You just cannot beat the mojo! Now on to 20 and 40... and oh by the by, running 10 big watts here. Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Alabama QSO party
The Alabama QSO part is this weekend and I will be on, along with several of my fellow ops from the Birmingham Amateur Radio Club. Most of us will be running QRP. We will be lurking about the lower 40Khz of each band 160 thru 10M. If you are interested google Alabama QSO Party for the rules and schedule. I hope to see you there. Jim, W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] OT:DIGTRX
Anyone out there using this program. I am having trouble getting an picture to display. Don't have a clue what I am doing wrong. I can tune the signal in according to the directions, but no received picture is displayed. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Christmas wish
I wish for all the friends on the reflector, and the crew at Elecraft, Peace, and Love. Merry Christmas and a Happy and Prosperous New Year!!! Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-Twins, How sweet it is!!!
Got a package from Lisa yesterday, assembled the KIO2 and then moved the KAT100 and the KPA100 to the EC2 enclosure. All the parts were there except the higher current choke recommended. Wound that one on a spare toroid I had and the Twins are on the air. I have a few extra panels, but who knows what the future holds. Now on to the new M-Cubed power meter/frequency counter. Dang, probably wont get here 'til Friday because of the holiday! 73s Jim, W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K-Twins, How sweet it is!!
Paul, That is next on the agenda. One more K2 with the KAT2, KBT2, KSB2, KNB2, KDSP and gee, I think that covers it.G I wonder what the XYL will say? Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] KDSP2-settings for CW use
Karsten, I am no expert, but yes I have played with it a bit. I found everything greatly improved when I carefully aligned my filters (always with the KDSP2 in bypass) after getting tired of a 650hz sidetone( I moved it down to 500hz). Afterwards, I tweaked the KDSP2 to the filter alignment. I added quite a bit of gain (10db) and now the de-noiser is amazing. Before, when I would use the de-noiser, the signal would be degraded, but now it all seemed to come together. I now use the de-noiser quite often on weak signals. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] CW Keyboard Program - Freeware
I have just posted to my webpage a new program, K2Keyboard written by yours truly. This program was developed as an add-in for K2Comm, also by yours truly(also freeware), and will be included in the next release of K2Comm. Being only 7 days younger than dirt, I have some coordination problems with aged fingers and sometimes the paddles just get away from me. I am, by nature, a bit CW challenged anyway. I was using one of the more popular keyboard programs and discovered that when running on my machine, the noise level on 30M went up about 2 - 3 s-units. Ferrite chokes et al to no avail. This program uses no timing loops and runs much, much quieter in my shack. (This will tell your age: How many of you can recall loading a card deck into a computer, placing a portable radio on the cabinet, and listening to a tune emanating from the computer? I can hear it now, What is a card deck? G). Of course, BandScope, K2Comm, and the BasicStamp DDS controller are still out there for the pickin' http://webpages.charter.net/w4atkontheweb 73's Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Competition coming for Elecraft?
At $6K fully loaded I will take 4 K2/100s and have a bit left over for maybe a T1 or I don't think it will be competition for Elecraft. And did you look at all the surface mount, sure you can fix it, just buy a rework station. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:K2Comm
Just to let everyone know that are/were interested in K2Comm, a K2 control program by yours truly, the .zip install file and the VB6 source files are at: http://webpages.charter.net/w4atkontheweb I make no promises, but think it is pretty clean. I would appreciate any reports. You know the drill. Its all FREE, so NO WARRANTY GIVEN OR IMPLIED. USE AT YOUR OWN RISK. ( And any other caveats that would be appropriateG.) I am goin' back to my studio and paint a while, I am tired of programmin' Happy Hammin' Jim W4ATK P.S. BandScope source and .zip can be found on the same site. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: Bandscope
Ok, I finally got charter on the ball and they got my webpage back up. So now BandscopeV2.zip is now available via download from: http://webpages.charter.net/w4atkontheweb While there visting or just getting BandScopeV2 read the Welcome and Project messages for the latest goings on here at W4ATK. I know it ain't pretty, but the webpage is free or at least came with Charter high speed.G Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Testing
Found out the hard way, I can't send a picture thru the reflector. Now just trying to see if I am back to normal. Happy Hammin' Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Oh No!! Not another K2 Control Program!
What can I say. I wrote this one for me and BandScope fit real nicely into the options panel. If you want to see it take a look at http://webpages.charter.net/w4atkweb. Hey it ain't a fancy site, but it was free from my isp. Happy Hammin', Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] MicroHam microkeyer
Stewart wrote: Anyone using a MicroHam microkeyer with a K2 with an outboard KPA100 ? Stewart, As near as I can tell from the MicroHam MicroKeyer documentation, the device makes no connection to the K2 thru the K2's serial port, whether KPA100 or KI02. So I would suggest that answers your question. Your second statement does puzzle me a bit. You said, I'm interested in how the microkeyer copes with the non standard Elecraft RS232 implementation?. As a long time and very experienced datacomm engineer, I have to ask, what is non-standard about the K2 RS-232 implementation. I find it very straight forward, requiring no handshaking, simple and up to the task. Far simpler that some of the stuff (cleaned that up) that I have run into in my long and now retired career. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] MicroHam microkeyer
Stewart is absolutely correct in his reference to the reassigned pins on the K2 serial interface. I was not looking pas the rx/tx interface which is indeed simplicity in itself. I have apologized for my oversight to Stewart. Mea' Culpa! 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] KAT100 woes... Time to 'fess up...
Gee Tom, now I dont feel quite so bad.. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:Bandscope program for the K2
Bandscope is an application in Microsoft Visual Basic that gives a graphic representation of activity surrounding your operating frequency using the K2's serial interface. A KI02 or KPA100 is required. I think just about everyone has their copy by now so this will be the last time it will be offered on the reflector. It is offered completely free and without charge. No warranty given or implied. Use at your own risk. The zip file contains appropriate instructions. Again you may pass it to your friends, but please no download sites without the permission of the author, namely me. Again, please forward your requests off the reflector, direct to me, [EMAIL PROTECTED] or [EMAIL PROTECTED] and I will email you the zip file. You request is your registration as a user of the program. If your isp does not like zip files, please provide an alternate e-mail address. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:K2 Bandscope
If you requested the program tonight, 10/10/05 and upon trying the installation got the message insert disk1 or if you have not yet tried the install and your zip file is not 3714KB with a timestamp of 10/10/05 at 9:19PM and you have not received a correcting message and zip file, please contact me immediately. Thank you for your patience and I sincerely apologize for any inconvenience. I apologize for the bandwidth but want to make sure everyone is covered. Jim Rogers W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2/100, computer control and CW
The question was: So, are there any programs out that use the computer control facility to send CW? Actually yes, and one of them is N3FJP's amateur contact log. If you do the CW Setup, F12 is already labeled KEYBOARD, which if I am not mistaken will fill the need. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:K7C
I have wasted many hours trying to work them. The pileups are horrendous. The lids are out in tremendous force. I have been trying at 100W because of the horrible operating discipline being shown, including profanity et al. I would suggest you wait until next week when a lot of the rock-crushers will have exhausted themselves. It will really make you appreciate the discipline exhibited within the QRP ranks where Skill, Not Power is the byword. Jim, W4ATK K2/100, KAT100, F12 C3ss, 80M inv vee. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 Programmer's Reference
I am puzzled. Some time back I started a K2 control project customized just for my way of operation. I included a quick menu control utilizing the SW38; through SW69; single switch menu commands. Recently going back to the project to include some new functions, those commands no longer seem to function. I fired up hyperterminal and sure enough, everything works as expected except those commands. Have I missed something here? They are/were a really nice feature. Firmware: 2.04P 1.09 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:K2 Programmer's Reference
I have found the sw38 thru sw69 commands are presetting the menu position, but to see the menu information on the LCD display, I must follow those with a sw05, MENU, command. So, there is a workaround to my problem, but in checking my older version source code, that does not seem to be the case. Jim, W4ATk ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE:K2 Programmer's Reference
I found that the sw38 thru sw69 commands were indeed pre-positioning the menu, but needed to be followed by a Menu, sw05, command to display the quickmenu selection on the LCD and make the information available to the control program. Things are all better now. Thanks for the BW. 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] It's a fine addition to my K2.
Oh me, there is always that 10% that did not get the word and I am guilty. This sounds like something to which I should have paid attention. Can some kind soul fill me in on Rework Eliminators? Thanks es 73s Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 Filter Settings MS Access Database
The hotlinks on the Elecraft website for K2Z are no longer valid it appears. 73 Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KPA100 Hi Current on 30M
I am a bit mystified by the reports of low power on 30M. I have K2 #4028 and bought my KPA-100 at the time I purchased my K2. Barefoot on 30M, I have 15w out (measured) and QRO a good solid 100W (measured). If I choose to observe power out in TUNE, the K2 will cut the power to around 55W, but coming out of tune and closing the key will get me a good solid 100W. I have not experienced a problem with overcurrent. I wonder what has changed in the more recently delivered KPA100s to cause the problem? Just for grins, I switched in the dummy load and on 30M with the POWER control at full throttle, I can bump 3.5 amps according to the K2 current display. And as reported above, a rock solid 100W. Just curious. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] The Spirit of this reflector
I know this is a bit long but it so represents the spirit of this reflector, I just had to pass it along. Enjoy. As one of Jeff's Elmers I know I walk a little taller after reading this. 73s Jim, W4ATK Find the Golden Thread in BARC By Jeff Drew, N4JDU There is a value to club membership that every new member needs to use. There is no charge, but the end results can not be measured. I have only been a ham for about a year but I have discovered from the Elmers ( i.e. senior hams) a sincere dedication to the future of ham radio and to us, he younger hams. I used to ask, why all this attention to younger hams? There is plenty of literature available to all of us, but nothing is better than actual one on one contact by an Elmer. We are fortunate to have in our club a large number of Elmers. I strongly recommend that any new ham find three or more Elmers to share the fine points of ham radio with you. I guarantee they will do it! Heres why: These hams have seen the effects of time on our hobby. Some good, some bad. They know that if we dont use it, we lose it! They realize that the bands associated with Amateur Radio are constantly being sought after by commercial endeavors. Currently, the attack is with access to broadband power lines (BPL). There are many such quests for our band space. My point is that the band allocation to ham radio is always politically un-stable. Technology plays an important factor here for both interests. The Elmers want to se the art form preserved. Their theory is that a certain perpetuation plan be put in place. Heres what I think it is: · Be available to young hams for questions and answers. · Help them in their particular interests. (I.e. Phone, Rtty, PSK, CW, Satellite, EME etc.) · Encourage new hams to explore the broad characteristics of the amateur radio. · Share your experience with new hams that want to learn. There may be more un-published directives from the Elmers, but I have seen their determination to preserve the hobby. From my point of view, they see the future of ham radio in us! It is up to us to put forth the effort to locate an Elmer to counsel us as we embark upon this vast sea of radio. Nothing could be a better resource than having the knowledge of an Elmer. It is the golden thread in our organization. Let s use it before we lose it! Think about how powerful we would all be if we each had an Elmer who passed on his experience with us! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] if it were not for bad luck
I am sorry, I inadvertently deleted your posting. In searching my e-mails I do not believe any one has responded to that post. If you would be so kind as to re-post, I will do what I can to assist. I had a t/r problem while building my K2 and may be able to help. 73 Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Force12 - C3ss
This is off topic, but I recvd mine today and appear to be missing the assembly instructions. Michelle is mailing some but hate to wait on snail mail. So if there is a kindly soul out there that happens to be a C3ss user who has a scanner and could e-mail me the instruction, I would be eternally grateful. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] MFJ 1279 and K2
I will pass this along for what it is worth. First a bit of background. a) The MFJ breaks the audio path from the sound card to the mic unless PTT is activated. This is a good thing. b) The MFJ provides an optically isolated CW keying circuit. This too is a good thing. c) The K2's ptt and dot line are one in the same. This has caused some consternation for those who would like to use, of all things, a footswitch (and I have a circuit that remedies that if anyone should need it. I don't). With the MFJ then there exist two paths for CW keying, the optically isolated path and simply keying PTT on the mic connector of the K2 via the MFJ. Why this was a problem for me: I did not like to hear the relay chattering away when on CW and felt it was advantageous not to have sound card audio routed to the K2 during cw keying. It did not produce a problem, I just did not like it. My solution: I installed a spst toggle switch of the miniature variety just above the Footswitch jack on the MFJ and hard wired the switch to JMP5. NO to JMP5-3, C to JMP5-2, NC to JMP5-1, I placed labels on the front panel labeled K for keying and P for PTT. Now I do not hear the relay when I am in CW mode with MixW and with a simple flip of the switch when I change modes to PSK31 the MFJ PTT circuitry is activated and audio from the sound card is routed to the radio. Cool. I have also programmed PF2 to go directly to the INP menu for selecting Padl keying or Hand keying (for the confuser) and PF1 to go directly to the PA menu for turning the amp on/off. And I made a y cable for the CW out of the MFJ that ties the CW out from the MFJ to the dot side of the paddle. A switch here a press there and voila' It works for me! 73 Jim, W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 S meter
I have an XG-1 and have calibrated my K2 accordingly. Sometimes, I run without the PREamp and this morning decided to see what effect that has on S meter readings so I could give more reasonable reports. I know a bunch of you have already done this but for what its worth: difference/correction (s units) 50uv signal PREamp on: S9 0 50uv signal PREamp off: S5 4 50uv signal ATTen on: S27 As a good contributor to the reflectors has often said, OK back in my cave! 73s, Jim, W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Antenna Analyzer Opinions?
Howard asks: Does anyone have experience with the Micro 908 Antenna Analyzer kit? Howard, I have used the MFJ and like it a lot, however, for me the choice would be the Micro908. It does more than antenna analysis and has many more possibilities long run, plus you get to build it! Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Merry Christmas
And a great time to tell you all how much I have enjoyed the year since becoming a member of this august society of Elecraft users. Thanks to everyone for your help, encouragement and your contribution to the hobby. God Bless you and yours and God Bless America 73 Jim Rogers, W4ATK and XYL Nancy and K9 Dixie Belle ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Freebie CAD program
I need to produce a couple of quality schematics. Anyone know of a freebie CAD program to do this. Jim, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] THANKS FOR FREEBIE CAD PROGRAM REPLIES
THANKS TO ALL WHO REPLIED. I DOWNLOADED ONE OF THE SUGGESTED PROGRAMS AND HAVE COMPLETED THE TASK. 73 JIM, W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Anyone using a K2 for RX and another TX?
Just for fun I whipped up a little logic circuit which placed appropriately in the K2 and with an added DOW-KEY relay and a foot switch would allow the use of the K2 as a reciever with a free standing transmitter. This is untested and just a mental exercise but it is how I would attempt to resolve the problem. I believe you can do it without breaking a single trace. It ain't QSK but it is just one switch. e-mail me if you want the proposed circuit. WARNING: If you play around with the MCU |MUTE circuitry, it is very ESD sensitive and I am not the only one who has discoverd that. The only solution if you blow it is a new MCU if you want the audio mute. 73, Jim, W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
REL[Elecraft] PLL Reference Oscillator Range Test
Well, it is there on page 8 of Trouble Shooting. The last two bullets on the page. Just where it would be if I were looking for it, dead last place I looked! :-) That circuit is pretty rock solid, no pun intended, but there are some pointers to check out. 73, Jim, W4ATK K2 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] The WaterLog
Guys es Gals... I ran across this item on e-QSL, and thought some of the KX1 owners might be interested. http://www.sotabeams.co.uk/waterlog.htm 73, Jim, W4ATK K2 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] USB to RS232
I seem to remember an article on a neat little PIC project, a USB to RS232 converter. I know there are a bunch out there for around $30 but I like to tinker, OK? Anyone remember that one? I think it was in QST. 73, Jim, W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2/100 and PSK31
OK gurus.. I think I am doing this right. I have advanced requested power just about full scale I have the transmit audio gain set to about 20w out idling. I have made sure that I am just below the point where the alc comes on I get really nice reports The fan comes on shortly after I start a QSO The heat sink gets really warm! Does that sound about right? I am just wondering if I should put some additional air on the heat sink with a larger muffin fan I just happen to have. 73, Jim W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Digipan 2.0 question
I note Digipan has a setup for some of the Icom radios to use serial data to command TX and RX negating the need to use DTR of any of the port control signals. Does anyone know if any of these selections are compatible with the K2? 73, Jim W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Beware the low power out jinx!
Finished K2 #4028 in January and never had any problem with low power output, until it showed up on the reflector recently with all the discussion about T2 and the binocular transformer. That did it! I fired up the rig to call an IK2 and no power on 17M and above. 160 thru 40 were fine, 20 was lower than usual. OH me! Down to the bench and out with the scope and hook up everything and the power was back! Decided to take some measurements for future reference and when I touched the XMT buffer output pin, things began to happen. Turned the rig over and reheated everything around the buffer and we are back 100%. Moral of the story, sometimes it takes a while for a problem to show up 73 Jim, W4ATK PS the IK2 was gone by the time I got the rig back in the shack! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: LDG tuners
A few days ago I posted an inquiry re: LDG tuners. I recieved very favorable replies. I was delighted to find a like new AT-11MP at the Oxford, AL hamfest this weekend at a very reasonable price. It appears to working out quite well on my 80M inv vee fed with open wire line thru a 4:1 balun. Thanks again to everyone who submitted a comment. 73s Jim W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Birmingham Amateur Radio Club Build Day
This is a bit off topic for the Elecraft Reflector so please pardon the band width. The BARC will host its first build day to introduce our members to kit building tomorrow starting at 9:00am at the Bluff Park School Cafetorium in Hoover, AL. We will be building RockMites. Everyone is welcome. BYOR (Bring Your Own Rockmite). Hopefully we will glean a few future Elecrafters from the bunch. Share the joy of kit building! 73 Jim, W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Soap Box Comment
I have notice some traffic here of late where folks give as the reason they sold their K2 is, the multi push button operation. I use one of the K2 control programs, K24U, to great advantage. So much so and since it did not do everything the way I wanted it to, wrote one of my own that displays and accesses all the pertinent controls for my modes of operation in a very user friendly manner. No designs on profiting from it, it is custom for me. My point is, the K2, an exceptional rig on its own, can be enhanced by one of the many packages available or a roll your own. The K2 programming interface is very friendly and a pleasure to work with. Someday, considering my age, someone else will own K2 #4028, but until that day, it will remain right here, at my beck and call, providing me with the most fun I have ever experienced in ham radio in over 51 years as a ham, but then I really like to build and tinker. Next Elecraft kit, KAT100 for my 72nd b'day. 73 Jim, W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Rag Chewer's Award
Seems to me I saw a post where the Rag Chewer's award has be revived. Can someone help me with that information? 73 Jim W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] Control board resistance checks on K2, help a newbie please
Jason wrote: For Q1 collector, Q2 collector, U6 pin 13, U6 pin 14, U8 pin 15 and U8 pin 16, I get a reading of 0L on my BK Tool Kit model 2704B DMM. This is the value that's normally displayed when you turn the knob to measure resistance and have an open circuit (i.e. the test leads aren't connected to anything). Does this mean I have an open circuit somewhere, or is the 0L mean infinite resistance (which would be OK on the checks)? Jason, same difference, infinite resistance is open circuit. I have forgotten exactly what my resistance checks measured at this point, but I would say, keep on truckin'. The main thing you are looking for is something that would measure very low, and consequently you might let the smoke out of some part. Don't be concerned about your DMM not flashing. All DMMs behave somewhat differently from one another. The slow change you observed on P2 pin 1 is probably the 22ufd cap charging up. Again nothing to be concerned about. I would say you are doing great. 73 Jim, W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ECN
Anyone hear the ECN? If so what frequency. Can't seem to find them. 73 Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: SMT kits?
Now that Wayne Burdick has a great idea. An introductory kit to SMT devices. That is why I like Elecraft. Thinking folks. As the cordinator for a build day for our local radio club, I embarked upon a small inexpensive kit search that would give our novice builders the biggest bang for their buck ($27) and something that hopefully could be completed in a day. As a result 11 RockMites were ordered from Dave Benson at Small Wonder Labs. The RockMite has one surface mount device. That gets installed first and the rest of the kit then builds around it. I am anxiously awaiting the day when we have 11 builders of various expertise gluing that one in. Fortunately we have planned elmers into the project so there will be an experienced builder at every table to guide faltering hands. Jim, W4ATK K2/100 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] XG1 and K2 Signal Tracing
Tom wrote: The XG1 is not variable in its output, so would the voltages be more or less in the same proportion to those in the manuals which started with a signal of 0.14 Vrms? (I'll be honest I didn't check the XG1 to see what the Vrms output is on it.) Tom in a lot of cases, the answer would be yes, but you must take into consideration other contributing factors that may distort the result. For instance AGC applied to a reciever stage would reduce the gain of that stage. I have found a great thing to do is to using the equipment you have at hand, ie the XG1, make you own measurements at the points suggested and record them. Walk through the whole procedure doing this. Now you have a baseline for your rig using a specific array of test equipment. Once you have done this, then as you re-align, fix, repair you always will have a reference point utilizing your equipment. You will know whether the performance has been enhanced or degraded. A lot of time we will spin our wheels trying to get some reading in a published procedure that is given to us only as a guideline. You are on the right track. Get familiar with your equipment and keep a log of what you find. You will be rewarded for your efforts. Good Show OM! 73 and Have Fun. Jim W4ATK K2 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE:[Elecraft] D104 use with k2/100
OOPS! John, not Linda. Boy is my face red! I hope the next time I will read the signature line. My apologies John. Jim W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] email reflector headers glitch or feature
Well, I for one would never have noticed the change if my attention had not been directed to it. Can't see it makes a whole lot of difference. Jim W4ATK K2/100 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] ECN
Anyone hear the ECN. I don't hear anything on 7045 but a close in CW station in a rag chew. Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] RE: ECN
Found it! Jim W4ATK k2/100 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] OK Computer gurus, a little help
Is there a way to have the audio input (say K2 audio) to the sound card loop back to the output. In other words if I patch the audio from the K2 to the sound card input to use CWGet, I would like to use the audio output from the sound card to monitor the cw audio. The documentation on the sound card in my hp zu1175 seems a bit sketchy, and no doubt this may be something most people do not want to do. Hey if that isn't clear, give me a break, I am, after all, sound card challenged Thanks and 73, Jim W4ATK K2/100 4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] OK Computer gurus, a little help
Thanks guys, For all the input. I knew I could depend on you. It just seems my sound card setup on this laptop does not support that option. I built a little isolation unit to connect the rig and the pc/sound card and provided for an external speaker and a set of headphones. It is completely passive, but works quite well. I included a pot so I regulate the level to the sound card. 73s de W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Archive search.. HOW ?
Mike wrote: I'm trying to discover if the AuxBus is bi-directional, especially for the K60XV. Is there any info on the AuxBus ? Can't help you with the archive, Mike, but yes the AuxBus is Bi-directional. Go to the MicroChip web site and check out the PIC controller documentation. It is all there. 73, Jim W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: IC-7800
Julian wrote: I don't need to own one to know that I get far more pleasure using a radio I built myself than operating some ready-made box of tricks packed with unnecessary bells and whistles. That, for me, is the only comparison that really matters. Jim responds: AMEN, AMEN! Ham radio lives... 73 de Jim, W4ATK K2/100 #4028 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com