[Elecraft] K1-4 plus extras for sale
I have for sale a K1-4 (40,30,20,17) including a K1-2 board (80,15), internal antenna tuner, tilt stand, and K1 backlight. All in excellent condition both electrically and cosmetically. $475 shipped to lower 48 states. Thanks, MyronK4YA __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Now that the K-Pod is shipping, we could use your help with useful macros
Can someone tell me how long the supplied data cable is? 73MyronK4YA > From: r...@cobi.biz > To: als...@comcast.net; elecraft@mailman.qth.net > Date: Fri, 8 Jul 2016 10:06:37 -0700 > Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use > your help with useful macros > > They are the macros stored in locations 1 through 16 in the K3. > > 73, Ron AC7AC > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of brian > Sent: Friday, July 8, 2016 9:34 AM > To: elecraft@mailman.qth.net > Subject: Re: [Elecraft] Now that the K-Pod is shipping, we could use your > help with useful macros > > Are these 16 macros in addition to above those previously available in > firmware to be assigned to various K3 buttons? > > 73 de Brian/K3KO > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@live.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW reception with 3 peaks on PX3
My P3 does that when the NB is on and the level is too high. Myron On 8/5/2015 11:41 PM, Gerard Elijzen wrote: I was in contact with a CW station recently and his signal had 3 peaks on my PX3. Can anyone explain. The other station was using an ICOM 7410. Submitted this also on the KX3 Yahoo forum and had 1 reply. Thanks for that. Thought I might post it here in the hope to get an explanation. Have never seen this before and it does not happen on other CW stations. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@live.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] XV-222 Oscillation during TX
Mike, I've had the very same problems with both my 222 and 432 transverters just as you. With the top of the enclosure in place, it goes into oscillation. With the top removed, problem solved. I don't have the problem with my 144 transverter. Also, I have found that I can't stack anything metallic on top of either the 222 or 432 transverters with the top of the enclosure removed or oscillation becomes a problem again. I have replaced both top covers with plexiglass purchased from Lowes. Easy to cut on the bandsaw. All problems are now solved and it also looks cool. :-) 73MyronK4YA From: k...@flash.net To: elecraft@mailman.qth.net Date: Sat, 20 Aug 2011 13:29:16 -0500 Subject: [Elecraft] XV-222 Oscillation during TX Last night I was talking with a local on 222 SSB, and I noticed most of the lights on my XV-222 bar graph were staying on in TX, like it was in a peak-hold mode. At the same time I noticed Hi-RFI alarm coming up on the K3 display while transmitting. A quick check and everything seemed tight, SWR was good, and no other rigs were on (at least in TX). I did look at some of the reported RFI cases here on the reflector, but they seemed to be RFI into the XV-222 from other rigs. So, I popped it on my spectrum analyzer and, while transmitting, there it was, a strong osciilation at about 300 MHz. Now, with 222 present it swamps the oscillation so when you're sending CW, the oscillation is present between the character spaces, and on the watt meter all you see is around 15-20 watts output. Or like FSK with a 78 MHz shift. Next I popped off the XV-22 top cover and of course the problem was gone. I suspected that there was coupling from the PA output into the top cover and back into an earlier stage causing this instability. In fact, I can hold the cover in my hands, and covering just half of the XVTR PA and it starts oscillating. Has anyone seen their XV-222 unit oscillate during TX (sans an applied 222 signal)? Oh, yea, everything has been sanded and grounded per the instructions and as suggested by Wayne in the RFI emails. Has anyone seen this on their unit? Is there a tech note or app note out there on this? Thanks in advance. 73 Mike K9MK/5 Haslet TX. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html