[Elecraft] K3/100 TX problem on 20m

2024-03-07 Thread Paul Kent


Thanks again, Mike.
My K3 has the bipolar 100w PA.

I also have a properly-functioning K3S/100 with the CMOS PA. Just for 
comparison I ran the HP TX gain calibration on the K3S and it produced these 
numbers:

160m/19
80m/08
60m/10
40m/12
30m/13
20m/08
17m/08
15m/05
12m/10
10m/10
6m/06

The numbers are significantly different from those of the K3 but that probably 
doesn’t mean much. I even thought about swapping the PA modules between the K3 
and K3S as a test but they are not compatible for a direct swap.

Paul, K0PK

Sent from Mail for Windows

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] K3/100 TX problem on 20m

2024-03-06 Thread Paul Kent



Sent from Mail for Windows
Thanks, Mike.

The 50w TX gain numbers are: 160m/32, 80m/36, 60m/48, 40m/40, 30m/32, 20m/18, 
17m/11, 15m/08, 12m/05, 10m/05, 6m/02

Paul, K0PK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] K3/100 TX problem on 20m

2024-03-05 Thread Paul Kent


My K3/100 gives a high DC current warning when transmitting on 20m with power 
settings above 75 watts. Maximum output is about 80 watts and is unstable. All 
other bands perform normally with full 100w output and normal current draw. (50 
ohm dummy load) I have done the TX gain and wattmeter calibrations, finding no 
issues and with no change in symptoms. The output LPF is shared with 30m and I 
replaced all the capacitors in that circuit, also with no change in symptoms. 
Any ideas on what may be causing this problem?
Paul, K0PK
Sent from Mail for Windows

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com