[Elecraft] K60XV - ADR
after reading the description i am still confused. can this value be programmed such that the output of J2(3,4,5) can be: band binary out - trn1 000 trn2 001 trn3 010 trn4 011 i already have a band decoder looking for these encoded values. tnx, Ed wa3drc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] k60xv - second opinion needed
All, I am about to bring up my k60xv, mainly for the purpose of transverter interface. i just uninstalled a downeast xverter interface from my k2. i saw that i had a small jumper installed near j13 between two holes labelled 8T and X. i removed this jumper for use with the k60xv. i don't recall why it was jumpered, but assume it should not be there when using the k60xv board. confirm/deny? tnx, ed wa3drc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] k60xv - second opinion needed
All, I am about to bring up my k60xv, mainly for the purpose of transverter interface. i just uninstalled a downeast xverter interface from my k2. i saw that i had a small jumper installed near j13 between two holes labelled 8T and X. i removed this jumper for use with the k60xv. i don't recall why it was jumpered, but assume it should not be there when using the k60xv board. confirm/deny? tnx, ed wa3drc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] k2 audio power
All, I am just returning from a mountaintop weekend running the June QSO party in a multi-op environment. The k2 I supplied for the 222 station worked great, but there were several complaints, and I will be attempting to fix these before it's next excursion into this environment. The main complaint from all operators was audio power. There are 2 stations in the truck, and it is noisy with all of the amplifier fans and other local qrm. The volume knob on the k2 was never set below 3/4 to full for the entire weekend. When we used a second op for logging and Y'ed the headphones it was definitely at full throttle. I will at least add an external audio amp, but an internal mod would be good because I think it would be usefull even at home. There were other complaints too, but minor in nature. Manual PTT for cw being one of the other problems. With all of the external sequencing required for transverters and preamps and power amps, it would really be nice if the k2 would switch to tx when I pounce on the footswitch in cw. Other than that we pulled out the weak ones! Also, the agc off function was used well to make a couple of meteor contacts on 222. Lots of nice pings overnight. Ed wa3drc ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net http://mailman.qth.net/mailman/listinfo/elecraft You must subscribe to post. Subscriber Info (Addr. Change, Unsub etc): http://mailman.qth.net/subscribers.htm Elecraft page: http://www.elecraft.com
