[Elecraft] [OT] Test

2017-04-22 Thread Kevin Stover, AC0H

Testing
--
R. Kevin StoverAC0H
FISTS #11993
SKCC #215
NAQCC #3441
ARRL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] [OT]Test

2015-03-03 Thread Kevin Stover

Testing.

--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com


[Elecraft] Ot-test message.

2011-08-07 Thread kf4clo
 This is a test message.
kf4clo-Frank

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Ot-test-message-tp6661770p6661770.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


[Elecraft] ot-test agn

2011-08-07 Thread kf4clo
  Maybe this time?
Frank

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/ot-test-agn-tp6661820p6661820.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


[Elecraft] OT: Test

2010-04-17 Thread Randy Moore
Please ignore.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


Re: [Elecraft] OT: Test Equipment

2009-01-23 Thread Phil Debbie Salas
Not sure what you plan on using it for, but you might just be happy with your 
antenna analyzer output.  Antenna analyzers I've looked at (MFJ-259B, AIM4170B, 
AA-200) have a pretty well regulated RF output level across their full range.  
The MFJ-259B and AA-200 have 2Vp-p output levels, and the AIM-4170B has about a 
20mVp-p output level.  The MFJ-259B drifts around a lot, and needs to be run 
from a fixed voltage external power supply for best frequency stability after 
warm-up.  The AIM4170B and AA-200 are synthesized and let you sweep as well.  
The AIM4170B even lets you zero its accuracy to WWV.  Then all you need are 
some step- and/or fixed-attenuators to get the level to where you want it.  I'm 
sure that the phase noise isn't HP-quality, but you can do a lot of normal 
ham-stuff.  I use the high level outputs with an oscilloscope for filter work.

Phil - AD5X___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] OT: Test Equipment

2009-01-22 Thread Lee Buller

If I were to buy a RF signal generator off of Ebaywhat is a good one to 
buy?  I don't want a WWII surplus RF signal generator and do not want the 
10,000 dollar one either.  I would like to have a transistor RF signal 
generator so that kind of leaves out the old Heaths and Eicos.

Does this august body of homebrew swamis have any suggestions?

Lee - K0WA


In our day and age it seems that Common Sense is in short supply.  If you don't 
have any Common Sense - get some Common Sense and use it.  If you can't find 
any Common Sense, ask for help from somebody who has some Common Sense.  Is 
Common Sense divine?___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] OT: Test Equipment

2009-01-22 Thread Jack Smith
HP8640B is the generator of choice for (a) low phase noise and (b) more 
or less affordable (in the $1K and less category.)

That being said, these generators are now well over 20 years old and are 
notorious for mechanical problems associated with switches and tuning 
gears. I would not purchase one unless you are prepared to do some work 
on it. If a switch or two isn't broken when you buy it, it soon will be. 
These are very complicated mechanically.

If your budget will stand it, I would purchase an HP8657B, or, as a 
somewhat less desirable unit, an HP8567A. Both are synthesized signal 
generators and are free of some of the problems that have been found 
with  their lower price brother generator, the HP8656. The phase noise 
and spurious outputs of these synthesized generators are much inferior 
to the 8640B. They are, however, fully synthesized, and can be remotely 
controlled over an HPIB interface, neither of which is the case for the 
8640B.

I have a pair of 8640Bs and a pair of 8657A's. Both 8640B's have 
mechanical problems that, fortunately, I can live with as I am not all 
that good at complicated mechanical repair work.

Jack K8ZOA


Lee Buller wrote:

 If I were to buy a RF signal generator off of Ebaywhat is a good 
 one to buy?  I don't want a WWII surplus RF signal generator and do 
 not want the 10,000 dollar one either.  I would like to have a 
 transistor RF signal generator so that kind of leaves out the old 
 Heaths and Eicos.

 Does this august body of homebrew swamis have any suggestions?

 Lee - K0WA


 In our day and age it seems that Common Sense is in short supply. If 
 you don't have any Common Sense - get some Common Sense and use it. If 
 you can't find any Common Sense, ask for help from somebody who has 
 some Common Sense. Is Common Sense divine?

 

 ___
 Elecraft mailing list
 Post to: Elecraft@mailman.qth.net
 You must be a subscriber to post to the list.
 Subscriber Info (Addr. Change, sub, unsub etc.):
  http://mailman.qth.net/mailman/listinfo/elecraft

 Help: http://mailman.qth.net/subscribers.htm
 Elecraft web page: http://www.elecraft.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


Re: [Elecraft] OT: Test Equipment

2009-01-22 Thread Brian Alsop
The K-3 uses direct digital synthesis to get its frequencies, why not you?

For those of you who want to do a little HBing .   There is a direct 
digital synthesis RF generator kit from the below for under $30.
Upper audio to 60MHz with at least 1 Hz resolution.  Fits in a tiny minibox.

http://www.amqrp.org/kits/dds60/

You need to be able to assemble SMT stuff.   You also need to provide an 
attenuator since it puts out several volts.
There is a free parallel port based program one may use to generate the 
programming word.   It can run for 10 hours on an eight pack of 
rechargable AA NIMH batteries  . 

Several alternative ways of providing the programming word are given in 
the documentation.   The alternative ways involve PIC's and some 
programming-- not for everyone.   I threw together an alternative using 
a BASIC STAMP, STAMP floating point processor, an LCD display and 
pushbuttons for input.   Works for me.   

The unit drifts initially about 50 Hz and settles down to be as stable 
as the K3 in about half an hour.

Recently used it ( + 80 db attenuation) and the FILTER tools program 
described in posts on this reflector to generate a bunch of filter 
plots.   Worked very nicely.  Held it's frequency within 1Hz for the 
whole series of filter runs.

I have no financial interest in AMQRP or the DDS-60 product.

73 de Brian/K3KO

Don Wilhelm wrote:

Lee,

Assuming you want quality without a lot of expense,  I would wait until 
an HP 8640B shows up.  500 kHz to 512 MHz CW or AM (some have FM 
capabilities).  They are well shielded and the output attenuator is 
calibrated - goes from +20 dBm to -130 on the fixed attenuator and can 
be reduced to -140 dBm.
There is some warmup drift  that lasts for as much as 2 hours, but they 
do settle down to a very stable frequency.

There may be newer signal generators that have the same performance 
specs, but this is an old favorite of many.  The only major problem I 
know about is reports of broken gears - mine does not suffer from that 
problem (yet).

73,
Don W3FPR

Lee Buller wrote:
  

If I were to buy a RF signal generator off of Ebaywhat is a good 
one to buy?  I don't want a WWII surplus RF signal generator and do 
not want the 10,000 dollar one either.  I would like to have a 
transistor RF signal generator so that kind of leaves out the old 
Heaths and Eicos.

Does this august body of homebrew swamis have any suggestions?

Lee - K0WA


In our day and age it seems that Common Sense is in short supply. If 
you don't have any Common Sense - get some Common Sense and use it. If 
you can't find any Common Sense, ask for help from somebody who has 
some Common Sense. Is Common Sense divine?



___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com



No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.176 / Virus Database: 270.10.12/1909 - Release Date: 1/22/2009 
7:08 AM

  


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

  


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


Re: [Elecraft] OT: Test Equipment

2009-01-22 Thread Joe Planisky
If you can get by with ham-band only frequency coverage, what about  
using the K3 + KXV3 + some attenuators as a signal generator?  You  
could even forgo the KXV3 if you have attenuators that can handle 100mW.

73
--
Joe KB8AP


On Jan 22, 2009, at 11:02 AM, Lee Buller wrote:


 If I were to buy a RF signal generator off of Ebaywhat is a good  
 one to buy?  I don't want a WWII surplus RF signal generator and do  
 not want the 10,000 dollar one either.  I would like to have a  
 transistor RF signal generator so that kind of leaves out the old  
 Heaths and Eicos.

 Does this august body of homebrew swamis have any suggestions?

 Lee - K0WA

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


Re: [Elecraft] OT: Test Equipment

2009-01-22 Thread w2bvh
You might want to check out the siggen in this months QEX. It has I/Q 
output up to 200MHz. Output level is settable and controllable. And if 
you need low phase noise, it has provision for an external low phase 
noise clock. It's also small and light; can be controlled by a pc or 
external microprocessor.

Lenny W2BVH

Lee Buller wrote:

 If I were to buy a RF signal generator off of Ebaywhat is a good 
 one to buy?  I don't want a WWII surplus RF signal generator and do 
 not want the 10,000 dollar one either.  I would like to have a 
 transistor RF signal generator so that kind of leaves out the old 
 Heaths and Eicos.

 Does this august body of homebrew swamis have any suggestions?

 Lee - K0WA


 In our day and age it seems that Common Sense is in short supply. If 
 you don't have any Common Sense - get some Common Sense and use it. If 
 you can't find any Common Sense, ask for help from somebody who has 
 some Common Sense. Is Common Sense divine?

 

 ___
 Elecraft mailing list
 Post to: Elecraft@mailman.qth.net
 You must be a subscriber to post to the list.
 Subscriber Info (Addr. Change, sub, unsub etc.):
  http://mailman.qth.net/mailman/listinfo/elecraft

 Help: http://mailman.qth.net/subscribers.htm
 Elecraft web page: http://www.elecraft.com

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


Re: [Elecraft] OT: Test Equipment

2009-01-22 Thread David Ferrington, M0XDF
There is one on eBay right now, with 14hr to go at $227
http://cgi.ebay.co.uk/HP-8640B-SIGNAL-GENERATOR_W0QQitemZ280304509503QQcmdZViewItemQQptZBI_Signal_Sources?hash=item280304509503_trksid=p3286.m63.l1177
 
 
73 de M0XDF, K3 #174

-- 
Why should I fear death? If I am, death is not. If death is, I am not.  
Why
should I fear that which cannot exist when I do?
-Epicurus, philosopher (c. 341-270 BCE)

On 22 Jan 2009, at 19:31, Don Wilhelm wrote:

 Assuming you want quality without a lot of expense,  I would wait  
 until
 an HP 8640B shows up.

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


[Elecraft] OT TEST - Cannot post to reflector

2008-10-17 Thread [EMAIL PROTECTED]
TEST for Tim at QTH Admin

Regards,

Vic

--
I am using the free version of SPAMfighter.
We are a community of 5.5 million users fighting spam.
SPAMfighter has removed 116 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] OT Test - Cannot post to reflector

2008-10-17 Thread [EMAIL PROTECTED]

Test plain text

--
I am using the free version of SPAMfighter.
We are a community of 5.5 million users fighting spam.
SPAMfighter has removed 116 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


[Elecraft] OT - Test

2006-04-03 Thread Geoffrey Mackenzie-Kennedy

Test de GM4ESD


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com