Re: [Elecraft] K-Pod Macros
As I sit and look at my station and my K-Pod, just remember Dayton is not that far away, and Wayne, Eric and the rest of the crew have been very very quiet. Remember they're very good at blowing people out of the water remember there was a radio that came out last year that caught everybody flat-footed .. esp the competition. Paul KB9AVO On Feb 16, 2017 3:28 PM, "Joe Stone (KF5WBO)"wrote: > According to the manual, through a future firmware upgrade, the K-Pod will > be > able to function as a USB HID (Human Interface Device) such as a keyboard > or > mouse. Conceivably, the eight K-Pod tap and hold switches could be mapped > to 16 P3 / PX3 macros. You could even implement three “banks” of 16 macros > for a total of 48 K-Pod macros. Of course, this assumes: 1. you have a P3 > equipped with the SVGA option or a PX3; 2. you’re not already using a > keyboard in conjunction with your P3 / PX3 (this would require USB hub > support); and 3. you haven’t already burned all 50 of your P3 / PX3 macros > (unlikely). > > In a nutshell, I’m assuming if the K-Pod is to function as a USB HID > keyboard, the tap and hold switches would correspond to standard keyboard > keys (including combinations of Ctrl, Alt and Shift modifiers). The keys > would be assigned to macros on the P3 / PX3. This wouldn’t require any > change to the P3 / PX3. The P3 / PX3 wouldn’t be able to differentiate the > K-Pod from a keyboard (which it already supports). > > With a P3, the K-Pod knob could continue to control the K3s/K3 via the data > connector. With the PX3, the K-Pod knob would present itself as a mouse. > Of course, this would require the beforementioned Mouse-n-Click QSY > support. > Alternatively, if you wanted the K-Pod knob to control the P3, the > Mouse-n-Click QSY support could be leveraged there as well. > > Joe > KF5WBO > > > > -- > View this message in context: http://elecraft.365791.n2. > nabble.com/Mouse-n-Click-QSY-tp7626984p7627007.html > Sent from the Elecraft mailing list archive at Nabble.com. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to pvandyke1...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-Pod Macros
According to the manual, through a future firmware upgrade, the K-Pod will be able to function as a USB HID (Human Interface Device) such as a keyboard or mouse. Conceivably, the eight K-Pod tap and hold switches could be mapped to 16 P3 / PX3 macros. You could even implement three “banks” of 16 macros for a total of 48 K-Pod macros. Of course, this assumes: 1. you have a P3 equipped with the SVGA option or a PX3; 2. you’re not already using a keyboard in conjunction with your P3 / PX3 (this would require USB hub support); and 3. you haven’t already burned all 50 of your P3 / PX3 macros (unlikely). In a nutshell, I’m assuming if the K-Pod is to function as a USB HID keyboard, the tap and hold switches would correspond to standard keyboard keys (including combinations of Ctrl, Alt and Shift modifiers). The keys would be assigned to macros on the P3 / PX3. This wouldn’t require any change to the P3 / PX3. The P3 / PX3 wouldn’t be able to differentiate the K-Pod from a keyboard (which it already supports). With a P3, the K-Pod knob could continue to control the K3s/K3 via the data connector. With the PX3, the K-Pod knob would present itself as a mouse. Of course, this would require the beforementioned Mouse-n-Click QSY support. Alternatively, if you wanted the K-Pod knob to control the P3, the Mouse-n-Click QSY support could be leveraged there as well. Joe KF5WBO -- View this message in context: http://elecraft.365791.n2.nabble.com/Mouse-n-Click-QSY-tp7626984p7627007.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-POD macros 9-16 on Mac or Linux
Short of running the windows version of the K3 utility in a VM, has anyone found a way to edit K-POD macro slots 9 through 16 on their MacOS or Linux system? Thanks, --mark __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
See the Owner's Manual (rev C) that I provided the link to: http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20Rev%20C.p df >From Page 7, "Operating the K-Pod": "Macros are launched at the K-Pod using tap and hold presses of switches F1 through F8 just as you tap and hold front panel switches on your K3S/K3: "Holding switches F1 through F8 for 1/2 second or more launches K3S/K3 macros 1 through 8. Tapping switches F1 through F8 (holding for less than 1/2 second) launches K3S/K3 macros 9 through 16." Of course, you choose which locations where you want to store each macro in the K3 in the Utility program just as in the past, and locations 1 through 16 are automatically assigned to the K-Pod switches (buttons) as described above. The owner's manual is growing as more information is added. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith Sent: Wednesday, September 28, 2016 9:23 PM To: Jim McDonald Cc: Elecraft@mailman.qth.net Subject: Re: [Elecraft] K-Pod macros Around? Beautiful! That's the Rosetta Stone I needed; From 9 on down to 16 in the Command Tester in the Utility: 9 = F1 10 = F2 11 = F3 And so on to 16 - F8 Maybe they will mention that in the next Rev of the owner's manual. Thank you all, now I'll have to figure out the more complex macros and how I might want to use them but that will come. And thanks to those who provided links to help me out as well, I will certainly check them out. 73, Gary KA1J > > Gary, > > Here are mine as of now: > > > > 11 and 12 do what you want. 11 is F3 (tap), and 12 is F4 > (tap). > > 73, Jim N7US > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
Gary and all, The K-Pod buttons activate macros 1 thru 16. For instance, a hold of the F1 button activates Macro 1 and a tap activates Macro 9. So you create a Macro for those macro numbers. It is a subtle point, but you do not assign the K-Pod buttons to any random macro, that is pre-assigned. Place the desired macro into the proper numbered slot in the K3. 73, Don W3FPR On 9/28/2016 11:41 PM, Gary Smith wrote: But how do I ascribe a button on the K-Pod top a specific desired macro? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
On Wed, 2016-09-28 at 20:53 -0700, Nick Garner wrote: > Hi Gary, > A few weeks ago I made this website to help with the creation of > macros. > > http://pignology.net/emm/ > > 73, > Nick > N3WG That is a pretty cool page Nick... :) -- 73's, and thanks, Dave (NK7Z) For software/hardware reviews see: http://www.nk7z.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
Beautiful! That's the Rosetta Stone I needed; From 9 on down to 16 in the Command Tester in the Utility: 9 = F1 10 = F2 11 = F3 And so on to 16 - F8 Maybe they will mention that in the next Rev of the owner's manual. Thank you all, now I'll have to figure out the more complex macros and how I might want to use them but that will come. And thanks to those who provided links to help me out as well, I will certainly check them out. 73, Gary KA1J > > Gary, > > Here are mine as of now: > > > > 11 and 12 do what you want. 11 is F3 (tap), and 12 is F4 > (tap). > > 73, Jim N7US > > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On > Behalf Of Gary Smith > Sent: September 28, 2016 22:41 > To: Elecraft@mailman.qth.net > Subject: Re: [Elecraft] K-Pod macros Around? > > I've been trying to find the info I am > looking for but I must be dumber than a box of New England > boulders. > > With the immediate goal of tapping the > K-Pod buttons to do the following: > > F3 = M3 (macro SWT35) > F4 = M4 (macro SWT39) > F7 = M1 (macro SWT21) > F8 = M2 (macro SWT31) > > I haven't found out how to make the F > buttons fire a specific macro. Some of the info below was > very helpful, such as SWT21 and that helped me figure out > more. > > But how do I ascribe a button on the K-Pod top a specific > desired macro? > > > Well thanks! I got the K-Pod a bit ago but it's been > unused because of > > other projects. My owner's manual only has 11 pages to it > so there > > have been a lot of revisions in a short time. > > > > Thanks & 73, > > > > Gary > > KA1J > > > > > I believe what you want is in the Rev C K-Pod Owner's > Manual on page > > > 16. IF you have an older version, you can download the > Rev C manual > > > here: > > > > > > > http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Ma > nual%20R > > > ev %20C.p df > > > > > > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" > M2 > > and so on. > > > > > > 73, Ron AC7AC > > > > -Original > Message- > > From: Elecraft > [mailto:elecraft-boun...@mailman.qth.net] On Behalf > > Of Gary > Smith Sent: Wednesday, September 28, 2016 3:43 PM To: > > > elecraft@mailman.qth.net Subject: [Elecraft] K-Pod macros Around? > > > > > It's time to finally start using the K-Pod. I had hoped it > might > > control the P3 as well as the K3s but apparently A P3 > function not > > happening yet. > > > > I would though like to > assign the > > functions of the K3s memories M1-M4 to the K-Pod > and if someone > > knows of a page with macros for this & maybe > even other nifty Macro > > treasures, I'd appreciate a link > > > > > Thanks & 73, > > > > Gary > > KA1J > > > __ > > > Elecraft mailing list > > Home: > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: > http://mailman.qth.net/mmfaq.htm > > Post: > mailto:Elecraft@mailman.qth.net > > > > This list hosted by: > http://www.qsl.net Please help support this > > email list: > http://www.qsl.net/donate.html Message delivered to > > > r...@elecraft.com > > > > > > > > > __ > > Elecraft mailing list > Home: > http://mailman.qth.net/mailman/listinfo/elecraft > Help: > http://mailman.qth.net/mmfaq.htm > Post: > mailto:Elecraft@mailman.qth.net > > This list hosted by: > http://www.qsl.net Please help support this email > list: > http://www.qsl.net/donate.html Message delivered to > > g...@ka1j.com > > __ > Elecraft mailing list Home: > http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: > mailto:Elecraft@mailman.qth.net This list hosted by: > http://www.qsl.net Please help support this email list: > http://www.qsl.net/donate.html Message delivered to j...@n7us.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
Hi Gary, A few weeks ago I made this website to help with the creation of macros. http://pignology.net/emm/ 73, Nick N3WG On Wed, Sep 28, 2016 at 3:42 PM, Gary Smithwrote: > It's time to finally start using the > K-Pod. I had hoped it might control the P3 > as well as the K3s but apparently A P3 > function not happening yet. > > I would though like to assign the > functions of the K3s memories M1-M4 to the > K-Pod and if someone knows of a page with > macros for this & maybe even other nifty > Macro treasures, I'd appreciate a link > > Thanks & 73, > > Gary > KA1J > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to nwgar...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
I've been trying to find the info I am looking for but I must be dumber than a box of New England boulders. With the immediate goal of tapping the K-Pod buttons to do the following: F3 = M3 (macro SWT35) F4 = M4 (macro SWT39) F7 = M1 (macro SWT21) F8 = M2 (macro SWT31) I haven't found out how to make the F buttons fire a specific macro. Some of the info below was very helpful, such as SWT21 and that helped me figure out more. But how do I ascribe a button on the K-Pod top a specific desired macro? > Well thanks! I got the K-Pod a bit ago but > it's been unused because of other > projects. My owner's manual only has 11 > pages to it so there have been a lot of > revisions in a short time. > > Thanks & 73, > > Gary > KA1J > > > I believe what you want is in the Rev C K-Pod Owner's Manual on page > > 16. IF you have an older version, you can download the Rev C manual > > here: > > > > http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20R > > ev %20C.p df > > > > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" M2 > > and so on. > > > > > > 73, Ron AC7AC > > > > -Original Message- > > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf > > Of Gary Smith Sent: Wednesday, September 28, 2016 3:43 PM To: > > elecraft@mailman.qth.net Subject: [Elecraft] K-Pod macros Around? > > > > It's time to finally start using the > > K-Pod. I had hoped it might control the P3 as well as the K3s but > > apparently A P3 function not happening yet. > > > > I would though like to assign the > > functions of the K3s memories M1-M4 to the K-Pod and if someone > > knows of a page with macros for this & maybe even other nifty Macro > > treasures, I'd appreciate a link > > > > Thanks & 73, > > > > Gary > > KA1J > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to r...@elecraft.com > > > > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to g...@ka1j.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
Well thanks! I got the K-Pod a bit ago but it's been unused because of other projects. My owner's manual only has 11 pages to it so there have been a lot of revisions in a short time. Thanks & 73, Gary KA1J > I believe what you want is in the Rev C K-Pod Owner's Manual on page > 16. IF you have an older version, you can download the Rev C manual > here: > > http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20Rev > %20C.p df > > For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" M2 and > so on. > > > 73, Ron AC7AC > > -Original Message- > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of > Gary Smith Sent: Wednesday, September 28, 2016 3:43 PM To: > elecraft@mailman.qth.net Subject: [Elecraft] K-Pod macros Around? > > It's time to finally start using the > K-Pod. I had hoped it might control the P3 as well as the K3s but > apparently A P3 function not happening yet. > > I would though like to assign the > functions of the K3s memories M1-M4 to the K-Pod and if someone knows > of a page with macros for this & maybe even other nifty Macro > treasures, I'd appreciate a link > > Thanks & 73, > > Gary > KA1J > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@elecraft.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K-Pod macros Around?
I believe what you want is in the Rev C K-Pod Owner's Manual on page 16. IF you have an older version, you can download the Rev C manual here: http://www.elecraft.com/manual/E740285%20KPOD%20Owner's%20Manual%20Rev%20C.p df For example, SWT21; will "tap" M1 on the K3, SWT32; will "tap" M2 and so on. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith Sent: Wednesday, September 28, 2016 3:43 PM To: elecraft@mailman.qth.net Subject: [Elecraft] K-Pod macros Around? It's time to finally start using the K-Pod. I had hoped it might control the P3 as well as the K3s but apparently A P3 function not happening yet. I would though like to assign the functions of the K3s memories M1-M4 to the K-Pod and if someone knows of a page with macros for this & maybe even other nifty Macro treasures, I'd appreciate a link Thanks & 73, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-Pod macros Around?
It's time to finally start using the K-Pod. I had hoped it might control the P3 as well as the K3s but apparently A P3 function not happening yet. I would though like to assign the functions of the K3s memories M1-M4 to the K-Pod and if someone knows of a page with macros for this & maybe even other nifty Macro treasures, I'd appreciate a link Thanks & 73, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K-POD Macros
After seeing that the LED programming functionality for the K-POD was available, I received the beta for the utility and the firmware for the POD. Very cool. I'm not sure what others are doing, but here is how I have my K-POD programmed: F1 - tap turns on D1, puts radio in split, turns on sub rx and moves xmtr up 2. Hold clears all and turns D1 off F2 - tap turns on D2 and does the same as above but up 5. Hold clears F3 - tap is Mon on, hold is Mon off F6 - tap turns on XIT and lights D3; hold turns XIT off and turns off D3 F7 - tap clears RIT F8 - tap turns on RIT and lights D4; hold turns off RIT and D4. It's all pretty convenient (for me, at least!)... 73, Ed K6CTA Sent from my iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com