[Elecraft] K1 RIT Mod!!!
Hi again, I just soldered a bit. Changing C7 is not to my satisfaction as it also increased the tuning range considerably. So C2 or L1 would have to be adjusted too. After a more thorough search in the web I found out that changing R4 and R5 on the FPB has the same effect on the RIT range but leaves the tuning (VFO) range as is. I changed the 10k resistors to 56k which gives me about +/- 700Hz RIT. I wonder why this simple method is not described in the manual... And I wonder why the side effect of changing C7 is not mentioned either. It would be nice to decide the RIT range during build time like the VFO range. Keep on building! Gerhard Schwanz DH3FAW mailto:[EMAIL PROTECTED] http://www.gs-personal.de ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K1 RIT Mod???
Hi there, I want my RIT to be +/-600Hz like in the K2. C7 has to be changed, to be smaller, says the manual. But how much smaller? Any idea or do I have to try? Thanks Gerhard Schwanz DH3FAW mailto:[EMAIL PROTECTED] http://www.gs-personal.de __ Gesendet von Yahoo! Mail - http://mail.yahoo.de Mit Yahoo! Suche finden Sie alles: http://suche.yahoo.de ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
