Re: [Elecraft] K3 & Ham Radio Deluxe

[PKA]

I am using HRD 5.24 and remote access (using Teamviewer).
It works well enough for my use (100% CW)

For me, the problem with a few  buttons is just an annoyance.
But there are other shortcomings in old HRD versions. I don't know if they 
apply to the most recent versions.

1. Keying a Winkeyer is possible, but the buffer handling is very slow in 
starting up sending CW. I used it for several  years, but had a real 
"eyeopener" when I changed to using the WK Demo program. It is so much faster 
and works absolutely great.
Actually using HRD with its poor buffer handling for keying a Winkeyer may lead 
to the misunderstanding that the internet latency is an obstacle against using 
CW-over-IP. It generally is not.
2. RIT does not work (I just use split VFO)
3. There is no good reading of the K3 SWR. However the TX level in upper left 
corner does show the SWR well enough to let you know if you have to activate 
the ATU (also when operating on a long latency internet connection)
4. Some  buttons do not change colour when selected. Of the few I use, the 
following do not change colour: Split, Test, NR, ALT. But that's not a real 
problem.
5. The VFO-B frequency reading acts strange. It seems only to read the 
frequency when I change VFO-A value. So if I push A>B and then change VFO-A it 
will change to the old VFO-A value.  As I recall it, I did not have this 
problem  on earlier versions.

73 de OZ4UN
Paul

-Oprindelig meddelelse-
Fra: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] 
På vegne af Doug Basberg
Sendt: 2. september 2013 20:25
Til: Elecraft@mailman.qth.net
Emne: [Elecraft] K3 & Ham Radio Deluxe

Which buttons do not function correctly?  If I knew that, I would try it in my 
HRD 6 version and report back.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Bill]

noise reduction
automatic notch filter
manual notch filter
A/B VFO

These are features that I use - other features may also not work, but I 
am not sure.


Bill W2BLC K-line
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 & Ham Radio Deluxe

[Doug Basberg]

Which buttons do not function correctly?  If I knew that, I would try it in
my HRD 6 version and report back.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Mike Flowers]

I opened a Mantis bug about this issue on 19 JUNE 2013:

" I'm running HRD V6.0.0.132 and a K3. O/S is 64-bit Windows 7 Professional.

Some HRD buttons that toggle a function ON/OFF are not highlighted when
selected. Other buttons that toggle a function ON/OFF are operating
properly.

The function toggle buttons that do are not being highlighted here are:

ALT, ATU, COURSE, NR, VOX, NOTCH, RX ANT, TEST

Instead of highlighting, the buttons listed above give a high tone/low tone
beep when the function is selected/deselected."

Also, in v6.1, the NR button is mapped to ATU for some reason - I wrote an
HRD macro to toggle NR and use that instead.

K3 is just on rig of many that HRD supports, and many have issues.   All in
all, I'm quite pleased with both the K3 implementation and the level of tech
support I get from the HRD team.   They've help me resolve a number of
thorny issues with my HRD implementation and added real value to my
operations.

- 73 de Mike, K6MKF, W6NAG, 3D2C, NCDXC, IDXG, K3-P3-KPA500-KAT500 Addict,
Maui


-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Stephen Selberg
Sent: Monday, September 02, 2013 8:23 AM
To: Bill
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe

I'm running hrd v6.1. If there's any one in the San Jose Ca area with a K3 I
can plug the laptop into, maybe we can get an answer for you. What buttons
specifically are not working?

73,

Steve KS6PD

Kx3 #3604

On Sunday, September 1, 2013, Bill wrote:

> I use HRD about 95% of the time - an older free version. I have 
> noticed that some of the buttons do not work correctly - in particular 
> - they do not change color when pushed.
>
> I asked the current HRD folks if the problem had been corrected with 
> the 6.xxx commercial version of HRD and was told they were "very busy 
> with product development." I then asked on the HRD reflector and was 
> told by a couple of other users that the problem has not been corrected.
>
> If you find a means to correct the issue, I'd sure like to hear about it.
>
> Thanks,
>
> Bill W2BLC
> __**__**__
> Elecraft mailing list
> Home: 
> http://mailman.qth.net/**mailman/listinfo/elecraft<http://mailman.qth.
> net/mailman/listinfo/elecraft>
> Help: 
> http://mailman.qth.net/mmfaq.**htm<http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Stephen Selberg]

I'm running hrd v6.1. If there's any one in the San Jose Ca area with a K3
I can plug the laptop into, maybe we can get an answer for you. What
buttons specifically are not working?

73,

Steve KS6PD

Kx3 #3604

On Sunday, September 1, 2013, Bill wrote:

> I use HRD about 95% of the time - an older free version. I have noticed
> that some of the buttons do not work correctly - in particular - they do
> not change color when pushed.
>
> I asked the current HRD folks if the problem had been corrected with the
> 6.xxx commercial version of HRD and was told they were "very busy with
> product development." I then asked on the HRD reflector and was told by a
> couple of other users that the problem has not been corrected.
>
> If you find a means to correct the issue, I'd sure like to hear about it.
>
> Thanks,
>
> Bill W2BLC
> __**__**__
> Elecraft mailing list
> Home: 
> http://mailman.qth.net/**mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.**htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Bill]

I use HRD about 95% of the time - an older free version. I have noticed 
that some of the buttons do not work correctly - in particular - they do 
not change color when pushed.


I asked the current HRD folks if the problem had been corrected with the 
6.xxx commercial version of HRD and was told they were "very busy with 
product development." I then asked on the HRD reflector and was told by 
a couple of other users that the problem has not been corrected.


If you find a means to correct the issue, I'd sure like to hear about it.

Thanks,

Bill W2BLC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 & Ham Radio Deluxe

[Steven Bertsch]

Is anyone using Ham Radio Deluxe with a K3? There are a couple of buttons in 
HRD that are not mapped correctly. I can't figure out how to fix them.

73, Steve K6SAB


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Gerald Manthey]

That's great- the Best radio and Best software suite working together.
Makes it better for all of us.
Thanks Eric and Rick.
 On Sep 29, 2012 6:53 PM, "Rick Ruhl"  wrote:

> QSX will be in V 6.0.  Eric  sent me the K3 and Im fixing a lot of long
> term
> issues.. QSX works great.. been chasing down DX with it ;)
>
>
> Thanks to Eric as always... We'll have the K3 at Stone Mountain for the
> demo.
>
>
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of gold...@charter.net
> Sent: Saturday, September 08, 2012 2:17 PM
> To: Adrian; 'Ian Kahn'
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 & Ham Radio Deluxe
>
> But then split does not work.No free lunch, I changed mine back.
>
> KD8NNU
> Don
>
> Sent from my HTC on the Now Network from Sprint!
>
> ----- Reply message -
> From: "Adrian" 
> Date: Fri, Sep 7, 2012 11:40 pm
> Subject: [Elecraft] K3 & Ham Radio Deluxe
> To: "'Ian Kahn'" 
> Cc: 
>
>
> Yes changing to yes if you had no was the clue.
>
>
>
> From: Ian Kahn [mailto:km4ik@gmail.com]
> Sent: Saturday, 8 September 2012 12:56 PM
> To: vk4tux
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 & Ham Radio Deluxe
>
>
>
> My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my
> K3.
> I had the same problem in the latest version of HRD.  I found, on my rig,
> by
> changing that setting to "Yes", then the automatic band switching when
> selecting a spot on a different band works perfectly.
>
>
>
> 73,
>
>
>
> --Ian
>
> Ian Kahn, KM4IK
>
> Roswell, GA EM74ua
>
> km4ik@gmail.com
>
> K3 #281, P3 #688
>
> HRD v5.x/6.0 Test Team
>
> On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:
>
> CONFIG:VFO IND = No
>
>
>
> --
> View this message in context:
>
> http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.h
> tml
> Sent from the Elecraft mailing list archive at Nabble.com.
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
>
> --
>
>
>
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Rick Ruhl]

QSX will be in V 6.0.  Eric  sent me the K3 and Im fixing a lot of long term
issues.. QSX works great.. been chasing down DX with it ;)


Thanks to Eric as always... We'll have the K3 at Stone Mountain for the
demo.



-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of gold...@charter.net
Sent: Saturday, September 08, 2012 2:17 PM
To: Adrian; 'Ian Kahn'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe

But then split does not work.No free lunch, I changed mine back. 

KD8NNU
Don

Sent from my HTC on the Now Network from Sprint!

- Reply message -
From: "Adrian" 
Date: Fri, Sep 7, 2012 11:40 pm
Subject: [Elecraft] K3 & Ham Radio Deluxe
To: "'Ian Kahn'" 
Cc: 


Yes changing to yes if you had no was the clue.

 

From: Ian Kahn [mailto:km4ik@gmail.com]
Sent: Saturday, 8 September 2012 12:56 PM
To: vk4tux
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe

 

My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my K3.
I had the same problem in the latest version of HRD.  I found, on my rig, by
changing that setting to "Yes", then the automatic band switching when
selecting a spot on a different band works perfectly.

 

73,

 

--Ian

Ian Kahn, KM4IK

Roswell, GA EM74ua

km4ik@gmail.com

K3 #281, P3 #688

HRD v5.x/6.0 Test Team

On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:

CONFIG:VFO IND = No



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.h
tml
Sent from the Elecraft mailing list archive at Nabble.com.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




-- 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Jimmy Walker]

Yes, that's the answer. The problem developed for me today. I consulted the 
archives and found the same answer specified in this response. I had done some 
work on the memory settings earlier in the afternoon. I have no idea how that 
may have changed this setting but it doesn't matter. Changing the CONFIG: VFO 
IND to YES solved the problem for me.


Jimmy Walker
Macon, GA

WA4ILO.com
wa4...@aol.com





-Original Message-
From: Ian Kahn 
To: vk4tux 
Cc: elecraft 
Sent: Fri, Sep 7, 2012 11:23 pm
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe


My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my
K3.  I had the same problem in the latest version of HRD.  I found, on my
rig, by changing that setting to "Yes", then the automatic band switching
when selecting a spot on a different band works perfectly.

73,

--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team

On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:

> CONFIG:VFO IND = No
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Adrian]

Yes, but not difficult to set up a macro > PF to toggle it if so desired.

 

From: gold...@charter.net [mailto:gold...@charter.net] 
Sent: Sunday, 9 September 2012 4:17 AM
To: Adrian; 'Ian Kahn'
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe

 

But then split does not work.No free lunch, I changed mine back. 

KD8NNU
Don

Sent from my HTC on the Now Network from Sprint!

- Reply message -
From: "Adrian" 
Date: Fri, Sep 7, 2012 11:40 pm
Subject: [Elecraft] K3 & Ham Radio Deluxe
To: "'Ian Kahn'" 
Cc: 


Yes changing to yes if you had no was the clue.



From: Ian Kahn [mailto:km4ik@gmail.com] 
Sent: Saturday, 8 September 2012 12:56 PM
To: vk4tux
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe



My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my K3.
I had the same problem in the latest version of HRD.  I found, on my rig, by
changing that setting to "Yes", then the automatic band switching when
selecting a spot on a different band works perfectly.



73,



--Ian

Ian Kahn, KM4IK

Roswell, GA EM74ua

km4ik@gmail.com

K3 #281, P3 #688

HRD v5.x/6.0 Test Team

On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:

CONFIG:VFO IND = No



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.h
tml
Sent from the Elecraft mailing list archive at Nabble.com.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




-- 





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[gold...@charter.net]

But then split does not work.No free lunch, I changed mine back. 

KD8NNU
Don

Sent from my HTC on the Now Network from Sprint!

- Reply message -
From: "Adrian" 
Date: Fri, Sep 7, 2012 11:40 pm
Subject: [Elecraft] K3 & Ham Radio Deluxe
To: "'Ian Kahn'" 
Cc: 


Yes changing to yes if you had no was the clue.

 

From: Ian Kahn [mailto:km4ik@gmail.com] 
Sent: Saturday, 8 September 2012 12:56 PM
To: vk4tux
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe

 

My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my K3.
I had the same problem in the latest version of HRD.  I found, on my rig, by
changing that setting to "Yes", then the automatic band switching when
selecting a spot on a different band works perfectly.

 

73,

 

--Ian

Ian Kahn, KM4IK

Roswell, GA EM74ua

km4ik@gmail.com

K3 #281, P3 #688

HRD v5.x/6.0 Test Team

On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:

CONFIG:VFO IND = No



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.h
tml
Sent from the Elecraft mailing list archive at Nabble.com.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




-- 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Adrian]

Yes changing to yes if you had no was the clue.

 

From: Ian Kahn [mailto:km4ik@gmail.com] 
Sent: Saturday, 8 September 2012 12:56 PM
To: vk4tux
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 & Ham Radio Deluxe

 

My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my K3.
I had the same problem in the latest version of HRD.  I found, on my rig, by
changing that setting to "Yes", then the automatic band switching when
selecting a spot on a different band works perfectly.

 

73,

 

--Ian

Ian Kahn, KM4IK

Roswell, GA EM74ua

km4ik@gmail.com

K3 #281, P3 #688

HRD v5.x/6.0 Test Team

On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:

CONFIG:VFO IND = No



--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.h
tml
Sent from the Elecraft mailing list archive at Nabble.com.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




-- 

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[Ian Kahn]

My CONFIG: VFO IND had been set to "No" the entire 18 months I've had my
K3.  I had the same problem in the latest version of HRD.  I found, on my
rig, by changing that setting to "Yes", then the automatic band switching
when selecting a spot on a different band works perfectly.

73,

--Ian
Ian Kahn, KM4IK
Roswell, GA EM74ua
km4ik@gmail.com
K3 #281, P3 #688
HRD v5.x/6.0 Test Team

On Fri, Sep 7, 2012 at 1:39 AM, vk4tux  wrote:

> CONFIG:VFO IND = No
>
>
>
> --
> View this message in context:
> http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



--
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe

[vk4tux]

CONFIG:VFO IND = No



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-tp7562232p7562233.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 & Ham Radio Deluxe

[Michael Marx]

Hi All,

I am trying to get me K3 fully working with Ham Radio Deluxe and have run into 
a snag.  When using their DX cluster window, I can click on a spot within the 
band I'm on and it works ok.  But if I try to click on a spot in a different 
band, the radio momentarily switches to the new band and frequency and then 
quickly drops back to where I was.  I have tried changing the baud rate and it 
made no difference.  It works fine with my old IC746.  Any ideas??

73,
Mike WB0SND


Michael Marx
sndtu...@vacuumtubes.com

www.vacuumtubes.com
SND Tube Sales
105 N. Division St.
Bonne Terre, MO  63628



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 & Ham Radio Deluxe Ver. 5.1 Serial Communication Issues

[hb9brj]

Running HRD 5.1 build 3209 on Win7 x64, COM port on mainboard.
K3 Firmware: DSP 2.73 MCU 4.47 DVR 1.03 Front 1.15

HRD > Tools > Program Options > Comms:
- "Read timeout" 500ms (default)
- "Switch off" enabled
- "Polling" disabled
- "Display timeout warnings " enabled
- "Dual VFO tracking" disabled
- "Refresh interval" 200ms
These settings were probably inherited from HRD 5.0 when upgrading to HRD
5.1.

No issues at all (so far)...

73, Markus HB9BRJ

--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-Ver-5-1-Serial-Communication-Issues-tp7299071p7299098.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 & Ham Radio Deluxe Ver. 5.1 Serial Communication Issues

[David S. Mulvey]

I am having trouble with the new Ham Radio Deluxe Version 5.1 software
release. Since I upgraded to 5.1, my Windows 7 PC and HRD will communicate
using the Elecraft USB/Serial cable as evidenced by seeing the K3 frequency
in the HRD K3 emulation screen.  However, after a few minutes the K3
emulation locks up and stops communicating with the K3.   

I am using a K3, P3 and a KPA500 all with current firmware, at 38.4 Kbps on
USB emulation Comm 6, when the HRD K3 emulation locks up, the Elecraft
K-Line continues to communicate among themselves correctly. 

Has anyone on the forum made the HRD 5.1 upgrade and if so, how do you have
your Comm settings set? 

Thank you in advance for your ideas and help! 



-
David S. Mulvey
N3CAQ
K3 #3788
P3 #937
KPA500 #595
--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Ham-Radio-Deluxe-Ver-5-1-Serial-Communication-Issues-tp7299071p7299071.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3 & Ham Radio Deluxe

[Bob - W0GI]

I have Ham Radio Deluxe and DB780 working well at this point on the K3, but
maybe I am missing something on the HRD interface. Some of the buttons seem
to have incomplete functionality. For example the RIT button does turn RIT
on and off on the radio, but there is no slider to adjust it, so it seems
pointless? The are other buttons that are similar, so what am I missing? Or
is this just a work in progress?

I have the latest V5 2434 Kit.

I also got the remote to work over IP to the HRD IP server, but it is a bit
buggy and the meter and other functions don't work on an IP remote session,
that do work on the local HRD connected to the K3 serial port.

I will post this on the HRD forum, but maybe someone here has a suggestion.

Aside from all that, this K3 is the best CW radio I have ever used. Beyond
that, it is just too cool.  The features are mostly usable stuff, and not
just worthless bells and whistles.

And maybe it's just me, but the I don't think the ergonomics are bad
considering the limited panel space.

I like the Mark-V ergonomics better, but the K3 isn't bad at all.

Only 4 days after finishing the K3 build, I already know that I'll be buried
with this rig. :>)
-- 
View this message in context: 
http://n2.nabble.com/K3-Ham-Radio-Deluxe-tp4531288p4531288.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3-Ham Radio Deluxe question

[ww2r2]

Bill

The K3 reports correctly up to 24999.999MHz. I am currently using mine on
24048.2MHz. Whereas Writelog uses this information appropriately I also have
never managed to get hrd4.1 to display it sensibly

Dave

G4fre
--

Message: 33
Date: Tue, 15 Dec 2009 21:11:14 -0600
From: Bill Davis Jr 
Subject: [Elecraft] K3-Ham Radio Deluxe question
To: Elecraft Mailer 
Message-ID: 
Content-Type: text/plain; charset="iso-8859-1"


  Started using HRD 4.1 build 2321 and with my K3. When trying to use it
with the 10Ghz transverter the frequency display on HRD is "bogus" and freq
control fails. So does HRD have an upper feq limit. Worked ok on 1296Mhz,
one digit less.

  Thanks

Thanks  Bill  K0AWU  EN37ed



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3-Ham Radio Deluxe question

[Julian, G4ILO]

Bill Davis Jr wrote:
> 
> 
>   Started using HRD 4.1 build 2321 and with my K3. When trying to use it
> with the 10Ghz transverter the frequency display on HRD is "bogus" and
> freq control fails. So does HRD have an upper feq limit. Worked ok on
> 1296Mhz, one digit less.
> 
> 

I don't know the answer to that but it would be easy to check. Set the rig
to 10GHz then open the K3 Utility go to the Terminal page and send the
command FA;  This is the command HRD would use to get the rig's frequency.
You should get a response FA followed by an 11 digit number, the frequency
in Hz. If the frequency is correct, HRD is not displaying it correctly.

-
Julian, G4ILO. K2 #392  K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html

-- 
View this message in context: 
http://n2.nabble.com/K3-Ham-Radio-Deluxe-question-tp4173651p4174684.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3-Ham Radio Deluxe question

[Bill Davis Jr]

  Started using HRD 4.1 build 2321 and with my K3. When trying to use it with 
the 10Ghz transverter the frequency display on HRD is "bogus" and freq control 
fails. So does HRD have an upper feq limit. Worked ok on 1296Mhz, one digit 
less.

  Thanks

Thanks  Bill  K0AWU  EN37ed
  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Ham Radio Deluxe band switching

[Brendan Minish]

if you have VFO IND = NO the you will have this issue 

HRD sets both VFO's by default, even where split is not required. in
this case it puts vfoB 'back where it found it 

unless you have VFO IND on then both VFO's must be on the same band. 
Setting VFOA jumps to the new band.
setting VFOB causes VFO A to revert to the same band as VFOB is on. this
is normal. the K3 is behaving as it should for the way it is configured.
Many of us prefer VFO IND = NO as I always want my main and sub on the
same band.

I raised this with Simon and would expect that it will be fixed soon.

frankly I can't see why the software would need to 'touch' VFO B unless
it's actually setting split mode.  

73
Brendan EI6IZ   




On Tue, 2009-09-08 at 03:15 -0500, Julian, G4ILO wrote:
> 
> 
> boyscout wrote:
> > 
> > Sorry if I've missed this topic in my search for it.
> > 
> > A few versions ago, Ham Radio Deluxe (HRD) software developed a problem
> > with properly tuning my K3 when a DX Cluster report is selected.   The
> > radio is supposed to tune itself to the band and frequency of the selected
> > DX Cluster report, but if the reported contact is on a band different from
> > the one the K3 is tuned to, it now only momentarily goes to that band
> > before immediately returning to the band it was tuned to.
> > 
> > If the K3 is already on the band, then the frequency is tuned just fine.
> > 
> > Moderators in the Ham Radio Deluxe forum have pointed the finger at
> > Elecraft, saying that its code is responsible for the problem.  Odd,
> > because the K3 worked just fine with all versions of HRD until the HRD
> > software was changed, but since we're getting no satisfaction there can
> > folks here respond to this?  Is there something wrong with the K3's code
> > that has only been revealed by the latest versions of HRD?
> > 
> > Thanks for any input.
> > 
> > 
> 
> I would have thought that by definition the K3 was the definitive
> implementation of the K3 software commands. If they do not work in the way a
> software developer expects then it is the software developer's job to work
> around them.
> 
> -
> Julian, G4ILO. K2 #392  K3 #222.
> * G4ILO's Shack - http://www.g4ilo.com
> * KComm - http://www.g4ilo.com/kcomm.html
> * KTune - http://www.g4ilo.com/ktune.html

-- 
73
Brendan EI6IZ 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Ham Radio Deluxe band switching

[Julian, G4ILO]

boyscout wrote:
> 
> Sorry if I've missed this topic in my search for it.
> 
> A few versions ago, Ham Radio Deluxe (HRD) software developed a problem
> with properly tuning my K3 when a DX Cluster report is selected.   The
> radio is supposed to tune itself to the band and frequency of the selected
> DX Cluster report, but if the reported contact is on a band different from
> the one the K3 is tuned to, it now only momentarily goes to that band
> before immediately returning to the band it was tuned to.
> 
> If the K3 is already on the band, then the frequency is tuned just fine.
> 
> Moderators in the Ham Radio Deluxe forum have pointed the finger at
> Elecraft, saying that its code is responsible for the problem.  Odd,
> because the K3 worked just fine with all versions of HRD until the HRD
> software was changed, but since we're getting no satisfaction there can
> folks here respond to this?  Is there something wrong with the K3's code
> that has only been revealed by the latest versions of HRD?
> 
> Thanks for any input.
> 
> 

I would have thought that by definition the K3 was the definitive
implementation of the K3 software commands. If they do not work in the way a
software developer expects then it is the software developer's job to work
around them.

-
Julian, G4ILO. K2 #392  K3 #222.
* G4ILO's Shack - http://www.g4ilo.com
* KComm - http://www.g4ilo.com/kcomm.html
* KTune - http://www.g4ilo.com/ktune.html

-- 
View this message in context: 
http://n2.nabble.com/Ham-Radio-Deluxe-band-switching-tp3599335p3601813.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3, Ham Radio Deluxe, DM780

[Alan D. Wilcox]

Simon,
Checked again ... off the network to get this sorted out. I don't have 
any ports to open

if  I'm just on the same PC as the K3.

K3 serial to PC running Win2K Pro. I invoke HRD and "Connect" to the K3, 
get K3 display.


Click "Remote" and see that I've started the Remote Service (which does 
seem to work remotely).


Click DM780 button, then for Radio, click "Configure" ... and get error 
msg below.

(Interestingly, I see a waterfall, but the signal controls don't work.)

Alan

--
Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701 


Simon Brown (HB9DRV) wrote:
The 'Refused' message is from Windows - the HRD IP Server is either 
not started or there's a firewall in the way. DM780 can find the 
computer but cannot connect to the service.


My guess - you haven't opened up a port...

Simon Brown, HB9DRV

- Original Message - From: "Alan D. Wilcox" 
<[EMAIL PROTECTED]>


Getting same error message whether I'm at the radio end or the remote 
end:
Start DM780, select to configure radio, use the defaults (localhost, 
7809, ckbox). Error says "no connection could be made because the 
target machine actively refused it."


Sometimes I see an error msg saying to be sure the K3 is on (it is) 
and "not in memory mode." (What's that?) Perhaps that plays into the 
solution somehow?





___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3, Ham Radio Deluxe, DM780

[Simon Brown (HB9DRV)]

The 'Refused' message is from Windows - the HRD IP Server is either not 
started or there's a firewall in the way. DM780 can find the computer but 
cannot connect to the service.


My guess - you haven't opened up a port...

Simon Brown, HB9DRV

- Original Message - 
From: "Alan D. Wilcox" <[EMAIL PROTECTED]>


Getting same error message whether I'm at the radio end or the remote end:
Start DM780, select to configure radio, use the defaults (localhost, 7809, 
ckbox). Error says "no connection could be made because the target machine 
actively refused it."


Sometimes I see an error msg saying to be sure the K3 is on (it is) and 
"not in memory mode." (What's that?) Perhaps that plays into the solution 
somehow?



___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K3, Ham Radio Deluxe, DM780

[Alan D. Wilcox]

Hello,

K3 working now with audio and HRD over my LAN. So far, so good, but 
Digital Master 780 won't connect.


Getting same error message whether I'm at the radio end or the remote end:
Start DM780, select to configure radio, use the defaults (localhost, 
7809, ckbox). Error says "no connection could be made because the target 
machine actively refused it."


Sometimes I see an error msg saying to be sure the K3 is on (it is) and 
"not in memory mode." (What's that?) Perhaps that plays into the 
solution somehow?


Ideas?
Alan

Alan D. Wilcox, W3DVX
570-321-1516
http://WilcoxEngineering.com
Williamsport, PA 17701 


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 Ham Radio Deluxe - Tuner Macro

[John A. McCabe]

K9ZTV wrote:
Why in the world would you want to use an external tuner when the K3 
has an internal one?


Secondly, I own several LDGs and the ATU in the K3 is superior to all 
of them.



I like external tuners because I can use one tuner on a several 
different radios. I can use one external tuner with my K2, SDR-1000 and 
soon my K3, instead of having to purchase a separate internal tuner for 
each radio. I am sure that the K3 internal tuner is a better tuner, but 
it is a setup that works well for me, the LDG tunes the antennas that I 
have with no problem, and it saves me money that I can spend on other 
things.



73, John KD8K
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 Ham Radio Deluxe - Tuner Macro

[Robert Benedict]

Right Vic

As stated in my original message I am referring to the action you get 
when you hit "tune" not "ATU tune". I do not have the internal tuner. I 
have an amp I occasionally use, so my autotuner is external.


When I hit "ATU tune" the K3 politely informs me that I do not have an 
ATU installed and does nothing.


Again, the K3 behavior is different than the K2 and every other 
transceiver I have seen. I hope that this will one day be changed, but I 
think Elecraft has bigger fish to fry today. So - meanwhile Simon's 
excellent software provides an easy way to shape actions to suit my needs.


   Bob
KD8CGH

For clarification, the K3's internal tuner *does* reduce the power 
when activated by the ATU button, (I think to 5 w). Bob is apparently 
talking about using an external tuner with the TUNE button, which does 
put out whatever power the radio is set to.



___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 Ham Radio Deluxe - Tuner Macro

[John A. McCabe]

For clarification, the K3's internal tuner *does* reduce the power 
when activated by the ATU button, (I think to 5 w). Bob is apparently 
talking about using an external tuner with the TUNE button, which does 
put out whatever power the radio is set to.


I hope that this can/will be fixed in a future firmware version for 
those of us using external tuners. I don't think it would be a good idea 
to send 100w to my LDG while it is tuning. In my opinion the K3 should 
follow the same behavior that the K2 does in that it should output at a 
selectable lower power when the tune button is selected even without the 
internal tuner.


73,

John, KD8K

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 Ham Radio Deluxe - Tuner Macro

[Vic K2VCO]

[EMAIL PROTECTED] wrote:

Great news about HRD support for the K3

My first macro is a "tuner" command to replace the unfortunate "tune"
behavior of the K3. Unlike the K2, which drops power to about 20
watts, the K3 will use whatever power you are set to. This isn't good
for the tuner or the K3.  I have already caused my K3 to instantly
thermal trip by forgetting to turn power down to tune and then back
up.


For clarification, the K3's internal tuner *does* reduce the power when 
activated by the ATU button, (I think to 5 w). Bob is apparently talking 
about using an external tuner with the TUNE button, which does put out 
whatever power the radio is set to.

--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 Ham Radio Deluxe - Tuner Macro

[Dave Martin]

FB, Bob.  That's plenty good enough to keep from arcing the relay
contacts on my SGC antenna coupler, not to mention reducing the QRM a
bit.  One thing I could say for the Icoms I have had is that they had
the ten watt tune function that they used with their external tuners.
That always worked fine for me.  Thanks.

Dave  W5DHM

On Dec 8, 2007 2:54 PM,  <[EMAIL PROTECTED]> wrote:
> Great news about HRD support for the K3
>
> My first macro is a "tuner" command to replace the unfortunate "tune" 
> behavior of the K3.
...
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K3 Ham Radio Deluxe - Tuner Macro

[rbenedic]

Great news about HRD support for the K3

My first macro is a "tuner" command to replace the unfortunate "tune" behavior 
of the K3. Unlike the K2, which drops power to about 20 watts, the K3 will use 
whatever power you are set to. This isn't good for the tuner or the K3.  I have 
already caused my K3 to instantly thermal trip by forgetting to turn power down 
to tune and then back up.

here is a short CAT command that I attached to a button I labeled "tuner"
PC020;
SWH16;
@ 1000;
SWH16;

You still need to remember to turn the power back up, but it will be gentle to 
your gear.

If anyone knows a more elegant solution I would like to hear it.

   Bob
 KD8CGH
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 - Ham Radio Deluxe available

[Gregg R. Lengling]

If it's that priceless then your next step should be this link:

http://hrd.ham-radio.ch/paypal/paypal.htm

Gotta get the plug in...Voluntary contributionshi hi.

Gregg R. Lengling, W9DHI
Administrator
http://www.milwaukeehdtv.org
http://forums.ham-radio.ch/

- Original Message - 
From: <[EMAIL PROTECTED]>

To: <[EMAIL PROTECTED]>; 
Sent: Saturday, December 08, 2007 12:45 PM
Subject: Re: [Elecraft] K3 - Ham Radio Deluxe available



In a message dated 12/8/2007 5:11:35 A.M.  Pacific Standard Time,
[EMAIL PROTECTED] writes:
For those with a K3 in the  shack, HRD is now available. There will be a 
lot

more support as Wayne adds  CAT-related features.

Folder:  http://www.ham-radio.ch/kits/beta/3.5/1686/

Kit:  http://www.ham-radio.ch/kits/beta/3.5/1686/HRDv035b1686_Full.exe

Simon  Brown, HB9DRV


+ fantastic +++

OK guys - is the K3 worth the wait???

1. Read Simons list-mail  10 seconds

2. Click on link and download 33.2MB file   33 seconds (OK so  I have High
Speed)

3. Install software while turning on the K3   17 seconds

4. Click finish "Open HRD"

5. K3 on screen60 seconds - Priceless!!~

Al  WA6VNN




___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 - Ham Radio Deluxe available

[AJSOENKE]

In a message dated 12/8/2007 5:11:35 A.M.  Pacific Standard Time, 
[EMAIL PROTECTED] writes:
For those with a K3 in the  shack, HRD is now available. There will be a lot 
more support as Wayne adds  CAT-related features.

Folder:  http://www.ham-radio.ch/kits/beta/3.5/1686/

Kit:  http://www.ham-radio.ch/kits/beta/3.5/1686/HRDv035b1686_Full.exe

Simon  Brown, HB9DRV 


+ fantastic +++
 
OK guys - is the K3 worth the wait???
 
1. Read Simons list-mail  10 seconds
 
2. Click on link and download 33.2MB file   33 seconds (OK so  I have High 
Speed)
 
3. Install software while turning on the K3   17 seconds
 
4. Click finish "Open HRD"
 
5. K3 on screen60 seconds - Priceless!!~
 
Al  WA6VNN



**Check out AOL's list of 2007's hottest 
products.
(http://money.aol.com/special/hot-products-2007?NCID=aoltop000301)
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

RE: [Elecraft] K3 - Ham Radio Deluxe available

[Craig Rairdin]

The program is supported by voluntary donations. I would think if a person
was using it and enjoying it, they'd consider making a reasonable donation.

Craig
NZ0R

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Don Rasmussen
Sent: Saturday, December 08, 2007 11:02 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 - Ham Radio Deluxe available


What's the only thing that can make Ham Radio Deluxe
more deluxe? Connect it to a K3!

Beyond that, who can complain of the cost?

I consider myself as much of a charitable organization
than a radio amateur. ;-)

"HRD is free for Radio Amateurs, Shortwave Listener
(SWLs) and charitable organisations."

Cool!

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K3 - Ham Radio Deluxe available

[Don Rasmussen]

What's the only thing that can make Ham Radio Deluxe
more deluxe? Connect it to a K3!

Beyond that, who can complain of the cost?

I consider myself as much of a charitable organization
than a radio amateur. ;-)

"HRD is free for Radio Amateurs, Shortwave Listener
(SWLs) and charitable organisations."

Cool!


[Elecraft] K3 - Ham Radio Deluxe available
Simon Brown (HB9DRV) simon at hb9drv.ch 
Sat Dec 8 08:10:38 EST 2007 

Previous message: [Elecraft] WTB: 2M transverter
and/or KX-1 
Next message: [Elecraft] K3 - Ham Radio Deluxe
available 

For those with a K3 in the shack, HRD is now
available. There will be a lot 
more support as Wayne adds CAT-related features.

Folder: http://www.ham-radio.ch/kits/beta/3.5/1686/

Kit:
http://www.ham-radio.ch/kits/beta/3.5/1686/HRDv035b1686_Full.exe

Simon Brown, HB9DRV 

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 - Ham Radio Deluxe available

[Tom Childers, N5GE]

On Sat, 08 Dec 2007 10:26:24 -0500, you wrote:

[snip]
>Simon, this is beyond cool. HRD took right off and ran.
>However, now it looks like I might have to buy another K3 for my remote 
>VHF site!
>
>Great program and thank you.
>
>73 de tom k8tb
[snip]

I don't have my K3 yet, but the install went great and all is working fine with
the Orion II.

Thanks Simon!

Tom, N5GE - SWOT 3537 - Grid EM12jq

They that can give up essential liberty
to obtain a little temporary safety
deserve neither liberty nor safety.

http://www.n5ge.com
http://www.eQSL.cc/Member.cfm?N5GE

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] K3 - Ham Radio Deluxe available

[K8TB]

Simon Brown (HB9DRV) wrote:
>For those with a K3 in the shack, HRD is now available.

   Simon, this is beyond cool. HRD took right off and ran.
However, now it looks like I might have to buy another K3 for my remote 
VHF site!


Great program and thank you.

73 de tom k8tb


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Elecraft] K3 - Ham Radio Deluxe available

[Simon Brown (HB9DRV)]

For those with a K3 in the shack, HRD is now available. There will be a lot 
more support as Wayne adds CAT-related features.


Folder: http://www.ham-radio.ch/kits/beta/3.5/1686/

Kit: http://www.ham-radio.ch/kits/beta/3.5/1686/HRDv035b1686_Full.exe

Simon Brown, HB9DRV 


___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft


Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com