Re: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle
Hi Tom - I was only using the K3 Utility to switch from one configuration to the other, then I close the port and close the program. But thanks for the heads up about not using them together. Bret/N4SRN > On November 25, 2017 at 3:17 PM tomb18 <tom...@videotron.ca> wrote: > > Hi > Actually what is happening is that both the p3 svga and the utility are > attempting to get access to the decoded text at the same time so when one > gets a character, the other misses it.. > If you wish to use the utility, just turn off text decoding display on > the svga. > 73 Tom > > > > Sent from my Samsung Galaxy smartphone. > > Original message > From: MaverickNH <cbjesse...@comcast.net> > Date: 2017-11-25 2:31 PM (GMT-05:00) > To: elecraft@mailman.qth.net > Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle > > I have always had problems using the K3 Utility to change configurations > from > another mode to CW, as I could see text decode on the K3S VFO B display > area > after a restore to my CW configuration but not on the P3-SVGA external > display without a lot of fiddling. I see now that simply turning the P3 > on/off is required after a configuration restore to get that text decode > to > display. > > I would make a note of that but would just forget where I put it. Now, > it's > right here for me to find! > > Bret/N4SRN > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to tom...@videotron.ca > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle
HiActually what is happening is that both the p3 svga and the utility are attempting to get access to the decoded text at the same time so when one gets a character, the other misses it.. If you wish to use the utility, just turn off text decoding display on the svga. 73 Tom Sent from my Samsung Galaxy smartphone. Original message From: MaverickNH <cbjesse...@comcast.net> Date: 2017-11-25 2:31 PM (GMT-05:00) To: elecraft@mailman.qth.net Subject: [Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle I have always had problems using the K3 Utility to change configurations from another mode to CW, as I could see text decode on the K3S VFO B display area after a restore to my CW configuration but not on the P3-SVGA external display without a lot of fiddling. I see now that simply turning the P3 on/off is required after a configuration restore to get that text decode to display. I would make a note of that but would just forget where I put it. Now, it's right here for me to find! Bret/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3S/P3-SVGA CW Decode - P3 Power Cycle
I have always had problems using the K3 Utility to change configurations from another mode to CW, as I could see text decode on the K3S VFO B display area after a restore to my CW configuration but not on the P3-SVGA external display without a lot of fiddling. I see now that simply turning the P3 on/off is required after a configuration restore to get that text decode to display. I would make a note of that but would just forget where I put it. Now, it's right here for me to find! Bret/N4SRN -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
