Some time ago I installed the PN2222 amp mod to my KSB2 board to increase the
10 meter SSB output on my QRP K2. Later I added the KPA100. John (KI6WX) said
the KSB2 amp mod was no longer needed since adequate output is obtained on 10
meters. I have since removed this PN2222 amp mod.
However, at the time I had the mod installed I had to do another mod suggested
by Gary Surrency to keep the balanced modulator from overdriving the ALC when
using PTT. This KSB2 mod replaces R9 with a 1.5K resistor and a 1K resistor is
placed across a cut trace between Q1's base and pin 6 of P1 connector. I am
wondering if I should undo this mod since I no longer have the PN2222 amp mod.
I am not aware of any adverse effect on my SSB signal. Roy Morris W4WFB
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.10/419 - Release Date: 8/15/2006
_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com