Mark,
The path through Q1 is only used in CW mode to make the path from the
BFO to the Transmit Mixer (on the RF Board) complete - that circuitry
replaces C167 which you removed from the RF board.
For SSB, the Balanced modulator signal goes 'backwards' through the
filter and is applied to Q2 where it should find its way back to the RF
board and on to the transmit mixer. Be certain the TXC signal is
operating correctly - it should be near 6 volts during CW transmit and
near zero during SSB transmit.
If you need more detailed info, please ask. I do not know of a document
with that level of detail other than the schematic.
73,
Don W3FPR
Beth Wenzel wrote:
Hi guys, i built my k2 about a year and a half ago, I've recently decided to add a
Ksb2, all wen together well, but... alas it doesn't work. I've checked all of the
signal voltages, everything is ok. I've traced (with an o-scope) a nice looking
modulated signal to the top of D3, then nothing. Checking D3 in circuit it looks
ok (.6 ohm forward, 100k reverse) I'm assuming the sig should pass through to
the base of Q3 (?).
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
