[Elecraft] KSB2 Setup issue
Got my KSB2 to the point where I am running the BFO setup for LSB/USB, i get all the way thru setting the LSB/BF!t frequency, I hit band- to return to the BFO parameter display, but when i hit mode to change the mode I am getting an info 230 message, and they K2 kicks me out of the menu without saving the settings. Not sure where to go from here, guidance would be appreciated. Matt W8ESE Former KD8DAO http://blog.MattIsKichigai.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KSB2 Setup issue
Discovered my freq counter probe is intermittent, trying to fix, but ordered a new one from elecraft just in case, guess i'll have to shelve the k2 until the new one arrives. Matt W8ESE Former KD8DAO http://blog.MattIsKichigai.com On Sat, May 2, 2009 at 12:14 PM, Matt Palmer kd8...@gmail.com wrote: Got my KSB2 to the point where I am running the BFO setup for LSB/USB, i get all the way thru setting the LSB/BF!t frequency, I hit band- to return to the BFO parameter display, but when i hit mode to change the mode I am getting an info 230 message, and they K2 kicks me out of the menu without saving the settings. Not sure where to go from here, guidance would be appreciated. Matt W8ESE Former KD8DAO http://blog.MattIsKichigai.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KSB2 Setup issue
Matt, Check the crimp pins in the connector housing - that is the most common place for the probe to fail. The pins must be inserted correctly into the housing and the small tabs must lock into the rectangular holes in the side of the housing. If the wire has been inserted too far into the crimp pin, the contact will not work correctly and will be deformed the first time you plug it into the mating header. 73, Don W3FPR Matt Palmer wrote: Discovered my freq counter probe is intermittent, trying to fix, but ordered a new one from elecraft just in case, guess i'll have to shelve the k2 until the new one arrives. Matt W8ESE __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
