[Elecraft] silent subreceiver on 14 MHz, need help
Just observed that the subreceiver of my K3 does not work on 14 MHz only. When I tune the sub it looks like that the VFO changes its frekvency as I hear spurr while tuning. No signal heard coming from antenna input. This phenomena is on 20m only the rest of the bands are fine. No difference between modes. Where shall I start the diagnosis? 73' István Szabó HA4ZD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] silent subreceiver on 14 MHz, need help
2012/3/4 István Szabó ha...@t-online.hu: Just observed that the subreceiver of my K3 does not work on 14 MHz only = Istvan, it could be something simple. Check to make sure that you haven't accidentally selected the Rx Ant or Ant 2 for the sub-RX on 20 meters. Tony KTØNY -- http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] silent subreceiver on 14 MHz, need help
Do you have the subRX AUX antenna selected for 20 meters? Enter BSET and tap ANT to switch between the main antenna and the AUX antenna. 73, Don W3FPR On 3/4/2012 9:27 AM, István Szabó wrote: Just observed that the subreceiver of my K3 does not work on 14 MHz only. When I tune the sub it looks like that the VFO changes its frekvency as I hear spurr while tuning. No signal heard coming from antenna input. This phenomena is on 20m only the rest of the bands are fine. No difference between modes. Where shall I start the diagnosis? 73' István Szabó HA4ZD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] silent subreceiver on 14 MHz, need help
Main ant vs. aux/other ant ant is saved separately by band and which RX, which might cause one the sub RX to seem off as that state is only displayed after BSET (hold on A/B button). Also true of ATT/PRE. This is also true of the NB and NR state and selection. If those are set to a hard quieting, the RX might seem off. 73, Guy 2012/3/4 István Szabó ha...@t-online.hu Just observed that the subreceiver of my K3 does not work on 14 MHz only. When I tune the sub it looks like that the VFO changes its frekvency as I hear spurr while tuning. No signal heard coming from antenna input. This phenomena is on 20m only the rest of the bands are fine. No difference between modes. Where shall I start the diagnosis? 73' István Szabó HA4ZD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] silent subreceiver on 14 MHz, need help
used KAF2 rev B 44$ shipped to us address. bill n...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] silent subreceiver on 14 MHz, need help
Yes, both of you were right. I use only ANT1 2 and I checked them before. Have not checked the AUX input and the sub was set to AUX. Slow mind on Sunday, thank you for the help. 73' István Szabó On 3/4/2012 4:00 PM, Guy Olinger K2AV wrote: Main ant vs. aux/other ant ant is saved separately by band and which RX, which might cause one the sub RX to seem off as that state is only displayed after BSET (hold on A/B button). Also true of ATT/PRE. This is also true of the NB and NR state and selection. If those are set to a hard quieting, the RX might seem off. 73, Guy 2012/3/4 István Szabó ha...@t-online.hu mailto:ha...@t-online.hu Just observed that the subreceiver of my K3 does not work on 14 MHz only. When I tune the sub it looks like that the VFO changes its frekvency as I hear spurr while tuning. No signal heard coming from antenna input. This phenomena is on 20m only the rest of the bands are fine. No difference between modes. Where shall I start the diagnosis? 73' István Szabó HA4ZD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
