Re: [Emc-developers] [Hosted Weblate] New comment in LinuxCNC/LinuxCNCDocumentation

2022-06-25 Thread gene heskett 

On 6/25/22 18:05, Steffen Möller via Emc-developers wrote:

I've been doing that for close to 20 years.

# Comment added

[ smoe](https://hosted.weblate.org/user/smoe/ "Steffen Möller"): [Hosted
Weblate](https://hosted.weblate.org) /
[LinuxCNC](https://hosted.weblate.org/projects/linuxcnc/) / [LinuxCNC
Documentation](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/) /
[English](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/)

## Source string

If you added backlash you need to increase the STEPGEN_MAXACCEL up to double
the MAX_ACCELERATION in the AXIS section of the INI file for each axis you
added backlash to. LinuxCNC uses "extra acceleration" at a reversal to take up
the backlash. Without backlash correction, step generator acceleration can be
just a few percent above the motion planner acceleration.

## Source string description

type: Plain text

## Comment

Please make this easier to understand.

[Edit this string](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?checksum=a3d0141560852a5a#comments)

## Source string location

[src/config/stepper-
diagnostics.adoc:68](https://github.com/LinuxCNC/linuxcnc/blob/master/docs/src/config/stepper-
diagnostics.adoc?plain=1#L68)

##  Translation Info

All strings|  [ 31,141
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-docs/en/) |
---|---|
Translated strings |  [ 31,141
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:>=translated) |  [ 100%
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:>=translated)
Untranslated strings   |  [ 0
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:empty)|  [ 0%
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:empty)
Unfinished strings |  [ 0
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:needs-editing)|  [ 0%
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?q=state:needs-editing)


[View](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/)

   
[Weblate, the libre continuous localization system.](https://weblate.org/)


Generated on June 26, 2022, 12:02 a.m..




___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers



Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] [Hosted Weblate] New comment in LinuxCNC/LinuxCNC Documentation

2022-06-25 Thread Steffen Möller via Emc-developers 


#  Comment added

[ smoe](https://hosted.weblate.org/user/smoe/ "Steffen Möller"): [Hosted
Weblate](https://hosted.weblate.org) /
[LinuxCNC](https://hosted.weblate.org/projects/linuxcnc/) / [LinuxCNC
Documentation](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/) /
[English](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/)

## Source string

If you added backlash you need to increase the STEPGEN_MAXACCEL up to double
the MAX_ACCELERATION in the AXIS section of the INI file for each axis you
added backlash to. LinuxCNC uses "extra acceleration" at a reversal to take up
the backlash. Without backlash correction, step generator acceleration can be
just a few percent above the motion planner acceleration.

## Source string description

type: Plain text

## Comment

Please make this easier to understand.

[Edit this string](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-
docs/en/?checksum=a3d0141560852a5a#comments)

## Source string location

[src/config/stepper-
diagnostics.adoc:68](https://github.com/LinuxCNC/linuxcnc/blob/master/docs/src/config/stepper-
diagnostics.adoc?plain=1#L68)

##  Translation Info

All strings|  [ 31,141 
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-docs/en/) |   
---|---|
Translated strings |  [ 31,141 
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:>=translated) |  [ 100%   
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:>=translated) 
Untranslated strings   |  [ 0  
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:empty)|  [ 0% 
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:empty)
Unfinished strings |  [ 0  
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:needs-editing)|  [ 0% 
](https://hosted.weblate.org/translate/linuxcnc/linuxcnc-  
docs/en/?q=state:needs-editing)


[View](https://hosted.weblate.org/projects/linuxcnc/linuxcnc-docs/en/)

  
[Weblate, the libre continuous localization system.](https://weblate.org/)

Generated on June 26, 2022, 12:02 a.m..

___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] I have a squawk

2022-06-25 Thread gene heskett 

On 6/25/22 13:58, andy pugh wrote:

On Sat, 25 Jun 2022 at 14:56, gene heskett  wrote:


And the text of the newest docs say it is the same format, but that is
a huge problem, as you have removed all references to the old tool.tbl
format from the docs.

I don't think that anything has actually changed.

The tool table is described here. I admit that it took some finding.
https://linuxcnc.org/docs/devel/html/gcode/tool-compensation.html#sec:tool-table


That was the page I was looking for, thanks Andy. It also confirms there's
no such critter as a ball nosed tool. Is my memory fading? ISTR the table
at one point back in the fog of about 2003 that it had a box for the tools
tip radius. To the next right of its diameter. Now apparently used for
front and rear angles of a lathe tool only.  Since I've never seen another
controller, if it wasn't in LinuxCNC, I sure don't recall where I did 
see it.

Thanks Andy.

Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] I have a squawk

2022-06-25 Thread gene heskett 

On 6/25/22 09:57, gene heskett wrote:

Greetings all;

The new tool table db might be a good way to expand the number of tools.

And the text of the newest docs say it is the same format, but that is
a huge problem, as you have removed all references to the old tool.tbl
format from the docs.

So where do I find a description, down to the last comma, of this format
now?

I did find out the old tool.tbl still works, but ack the wiki, its still 
incapable

of using  and displaying a BN tool.

Are there any plans to add that?

And I note while trying to get a grid in the viewport, that it doesn't 
work. Or

maybe it does but its nowhere near bright enough to see even with the lights
off. Maybe 5% as bright as the machine limits box. Suggestion, green is much
more visible, can that be fixed in an axisrc?

Thank you.

Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] I have a squawk

2022-06-25 Thread andy pugh 
On Sat, 25 Jun 2022 at 14:56, gene heskett  wrote:

> And the text of the newest docs say it is the same format, but that is
> a huge problem, as you have removed all references to the old tool.tbl
> format from the docs.

I don't think that anything has actually changed.

The tool table is described here. I admit that it took some finding.
https://linuxcnc.org/docs/devel/html/gcode/tool-compensation.html#sec:tool-table

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912


___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] I have a squawk

2022-06-25 Thread gene heskett 

Greetings all;

The new tool table db might be a good way to expand the number of tools.

And the text of the newest docs say it is the same format, but that is
a huge problem, as you have removed all references to the old tool.tbl
format from the docs.

So where do I find a description, down to the last comma, of this format
now?

Thanks.

Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis
Genes Web page 



___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Processed: Re: Bug#1012825: Removed symbol without major SONAME bump

2022-06-25 Thread Debian Bug Tracking System 
Processing control commands:

> tags 1012825 patch
Bug #1012825 [tiff] Removed symbol without major SONAME bump
Ignoring request to alter tags of bug #1012825 to the same tags previously set
> severity 1012825 normal
Bug #1012825 [tiff] Removed symbol without major SONAME bump
Severity set to 'normal' from 'critical'
> unblock 1012789 by 1012825
Bug #1012789 [linuxcnc-uspace] linuxcnc-uspace: Linux CNC will not start
1012789 was blocked by: 1012825
1012789 was not blocking any bugs.
Removed blocking bug(s) of 1012789: 1012825

-- 
1012789: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012789
1012825: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012825
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems


___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Processed: Re: Bug#1012825: Removed symbol without major SONAME bump

2022-06-25 Thread Debian Bug Tracking System 
Processing control commands:

> tags 1012825 patch
Bug #1012825 [tiff] Removed symbol without major SONAME bump
Ignoring request to alter tags of bug #1012825 to the same tags previously set
> severity 1012825 normal
Bug #1012825 [tiff] Removed symbol without major SONAME bump
Ignoring request to change severity of Bug 1012825 to the same value.
> unblock 1012789 by 1012825
Bug #1012789 [linuxcnc-uspace] linuxcnc-uspace: Linux CNC will not start
1012789 was not blocked by any bugs.
1012789 was not blocking any bugs.
Removed blocking bug(s) of 1012789: 1012825

-- 
1012789: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012789
1012825: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1012825
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems


___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers

[Emc-developers] Bug#1012789: Bug#1012825: Removed symbol without major SONAME bump

2022-06-25 Thread GCS 
Control: tags 1012825 patch
Control: severity 1012825 normal
Control: unblock 1012789 by 1012825

On Fri, Jun 24, 2022 at 11:57 AM Petter Reinholdtsen  wrote:
> Until upstream decide to reinsert the symbol or bump the SONAME, I
> suggest to carry this patch.  It should get the broken packages in
> Debian working again.
 As noted by libtiff upstream as well, this function was internal of
tiff and its declaration was in a header file that was not installed
publicly. They could change that without prior notice.
If linuxcnc-uspace still wants to use it, then copy that function[1]
and its details to their source tree. They already done copying with
the _TIFFsetString() function declaration.
Then I can add a break for its older versions for tiff.

Regards,
Laszlo/GCS
[1] https://gitlab.com/libtiff/libtiff/-/blob/master/libtiff/tif_dir.c#L43


___
Emc-developers mailing list
Emc-developers@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-developers