Re: [e-users] screen setup error
On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users said: > > On 4/5/23 12:43, Carsten Haitzler wrote: > > On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users > > said: > > > >> I'm just back to using E after a while, using 0.25.4 from Debian sid. > >> After first logging in, and every time after resuming from > >> screensaver/blanking, I get the pop-up error message: "You seem to have > >> no screens configured to be on the given outputs you have. This should > >> be fixed by going to: Settings-Screen-Screen Setup." > > is this a laptop? did you have the lid closed? > it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed this would imply the nvidia driver is unplugging all screens ever time the screen goes into dpms. check your logs as per previous email and see. all lines going RRR: will have to do with randr screen stuff. > >> When I do that, there is a list showing two DP-4 outputs where the > >> monitor is connected, and a third that lists the monitor. But the only > >> one that I can set the screen setup settings for is the first DP-4. What > >> do I need to do to setup the monitor to the output properly? > > what? multiple DP-4's - that shouldnt happen. you should have all outputs > > named differently. does xrandr (commandline) also list multiple dp-4's? > > only one DP-4 with xrandr. this is the output: > > $ xrandr > Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 > HDMI-0 disconnected primary (normal left inverted right x axis y axis) > DP-0 disconnected (normal left inverted right x axis y axis) > DP-1 disconnected (normal left inverted right x axis y axis) > DP-2 disconnected (normal left inverted right x axis y axis) > DP-3 disconnected (normal left inverted right x axis y axis) > DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) > 708mm x 399mm > 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 > 2560x1440 143.97 120.00 59.95 > 1920x1080 143.85 119.88 60.00 59.94 > 1680x1050 59.95 > 1440x900 59.89 > 1280x1024 75.02 60.02 > 1280x960 60.00 > 1280x720 119.88 60.00 59.94 50.00 > 1152x864 75.00 > 1024x768 75.03 70.07 60.00 > 800x600 75.00 72.19 60.32 56.25 > 720x576 50.00 > 720x480 59.94 > 640x480 75.00 72.81 59.94 59.93 > DP-5 disconnected (normal left inverted right x axis y axis) are you sure dp-4 is listed twice and it isn't just the hoversel showing the selected one at the top in addition to the set of possible selections below? > ___ > enlightenment-users mailing list > enlightenment-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- - Codito, ergo sum - "I code, therefore I am" -- Carsten Haitzler - ras...@rasterman.com ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] screen setup error
On 4/5/23 12:43, Carsten Haitzler wrote: On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users said: I'm just back to using E after a while, using 0.25.4 from Debian sid. After first logging in, and every time after resuming from screensaver/blanking, I get the pop-up error message: "You seem to have no screens configured to be on the given outputs you have. This should be fixed by going to: Settings-Screen-Screen Setup." is this a laptop? did you have the lid closed? it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed When I do that, there is a list showing two DP-4 outputs where the monitor is connected, and a third that lists the monitor. But the only one that I can set the screen setup settings for is the first DP-4. What do I need to do to setup the monitor to the output properly? what? multiple DP-4's - that shouldnt happen. you should have all outputs named differently. does xrandr (commandline) also list multiple dp-4's? only one DP-4 with xrandr. this is the output: $ xrandr Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 HDMI-0 disconnected primary (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis) DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 708mm x 399mm 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 2560x1440 143.97 120.00 59.95 1920x1080 143.85 119.88 60.00 59.94 1680x1050 59.95 1440x900 59.89 1280x1024 75.02 60.02 1280x960 60.00 1280x720 119.88 60.00 59.94 50.00 1152x864 75.00 1024x768 75.03 70.07 60.00 800x600 75.00 72.19 60.32 56.25 720x576 50.00 720x480 59.94 640x480 75.00 72.81 59.94 59.93 DP-5 disconnected (normal left inverted right x axis y axis) ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] Mouse does not always select window under pointer (xinerama)
On Sun, 2 Apr 2023 16:40:57 +0200 Benoît-Pierre Demaine said: > Hello. I am not going to stay subscribed to this ML after my issue is > solved. > > Using E17 since ... almost 17 or 18y ? and I had always set it to select > window under the pointer. Always worked fine, whatever the monitor count. > > Since my last installation (december 2021) there is an edge case where > it does not. When I have several monitors, windows belongs to right > monitor, extended to both, covers a windows on left monitor, and move > cursor from the pure left window, to the win that covers both monitor. > > In this specific case, the larg window is selected for an instant, then > loses focus. This is ennoying because to focus the win, I can't just > move the cursor 100 pixels, I have to move it to the other monitor ... > far far far away. This prevents me using small touchpad/trackpoint for > focus change. > > Is it a bug, or a configuration issue ? How to fix ? this smells like a bug but i'd like to see a video of it to be sure. > *** > > I also happen to loose the cursor from time to time; that bug had been > existing 15y ago for window placement and window move, and a specific > feature had been added to fix it "window recovery"; the feature had been > later removed because the core code became solid enough to never let the > issue happen again. But now, I have it with the cursor: > > when monitors don't have the same size, it may happen, a few times a > day, that moving the cursor from the bigger monitor, to the smaller one, > via the "step", traps the cursor into the black zone. Never could find a > good repro; and it's pretty hard to liberate the mouse out of the > prison. But sometimes, the cursor get trapped outside of the visible > space, in the VOID. this shouldn't happen - e does set screen boundaries/limits to stop this from happening. you could try disable pointer warping/moving in focus setting sin case its a pointer warp that does it? > -- > >o_/ DEMAINE Benoît-Pierre (aka DoubleHP) http://benoit.demaine.info/ > If computing were an exact science, IT engineers would'nt have work \_o< > > "So all that's left, Is the proof that love's not only blind but deaf." > (FAKE TALES OF SAN FRANCISCO, Arctic Monkeys) > > > > ___ > enlightenment-users mailing list > enlightenment-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- - Codito, ergo sum - "I code, therefore I am" -- Carsten Haitzler - ras...@rasterman.com ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] screen setup error
On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users said: > I'm just back to using E after a while, using 0.25.4 from Debian sid. > After first logging in, and every time after resuming from > screensaver/blanking, I get the pop-up error message: "You seem to have > no screens configured to be on the given outputs you have. This should > be fixed by going to: Settings-Screen-Screen Setup." is this a laptop? did you have the lid closed? > When I do that, there is a list showing two DP-4 outputs where the > monitor is connected, and a third that lists the monitor. But the only > one that I can set the screen setup settings for is the first DP-4. What > do I need to do to setup the monitor to the output properly? what? multiple DP-4's - that shouldnt happen. you should have all outputs named differently. does xrandr (commandline) also list multiple dp-4's? -- - Codito, ergo sum - "I code, therefore I am" -- Carsten Haitzler - ras...@rasterman.com ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
