[Fink-users] fontconfig2-dev-2.4.1-104
Hi $ fink update-all Information about 7480 packages read in 1 seconds. Can't resolve dependency system-xfree86-dev (= 2:7.2-1) for package fontconfig2-dev-2.4.1-104 (no matching packages/versions found) Exiting with failure. What is wrong? I tried the recipe in the previous mail attached. But it did not work well. sudo dpkg --remove --force-depends xorg xorg- shlibs It said no such xorg* were installed and having disregarded such instruction. Although I disregarded such notice and reinstalled the said packages, the same error message appeared. Sincerely, Akio On 2008/10/20, at 7:38, Alexander Hansen wrote: On Oct 19, 2008, at 5:33 PM, Ralf Höling wrote: fink-virtual-pkgs --debug.txt.zip Ah. Here's the problem: - skipping X11 virtuals, existing X11 packages installed - xorg is installed - xorg-shlibs is installed Since fink still thinks that its xorg package is installed, the system- xfree86 packages aren't getting created. You'll need to run sudo dpkg --remove --force-depends xorg xorg- shlibs and then reinstall X11 2.3.1 as well as the X11 SDK from Xcode. - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] fontconfig2-dev-2.4.1-104
Akio Sakai wrote: Hi $ fink update-all Information about 7480 packages read in 1 seconds. Can't resolve dependency system-xfree86-dev (= 2:7.2-1) for package fontconfig2-dev-2.4.1-104 (no matching packages/versions found) Exiting with failure. What is wrong? Hard to say without further information about your situation. For starters, tell us 1. Which version of MacOSX you are running 2. Which X11 do you have installed 3. What does fink list xfree86 show? -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] fontconfig2-dev-2.4.1-104
On Nov 29, 2008, at 6:30 AM, Martin Costabel wrote: Akio Sakai wrote: Hi $ fink update-all Information about 7480 packages read in 1 seconds. Can't resolve dependency system-xfree86-dev (= 2:7.2-1) for package fontconfig2-dev-2.4.1-104 (no matching packages/versions found) Exiting with failure. What is wrong? Hard to say without further information about your situation. For starters, tell us 1. Which version of MacOSX you are running 2. Which X11 do you have installed 3. What does fink list xfree86 show? -- Martin Also; if you run fink-virtual-pkgs --debug that will display what fink is looking for and not finding--look in the output for - checking for library libX11.6.dylib... found in /usr/X11R6/lib to see where the block of output related to X11 begins. - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] libpng12.0.dylib not loaded
Hello, (Mac 10.5.5, Xcode 3.1.2 on my MacBook Pro) I updated my system to 10.5.5 and I now have X11 2.1.5. Unfortunately, when I try and update-all I get the following message. It seems that there's a problem finding usr/X11/lib/libfontconfig.la I checked the directory and all I have is /usr/X11/lib/libfontconfig.1.1.0.dylib /usr/X11/lib/libfontconfig. 1.3.0.dylib /usr/X11/lib/libfontconfig.1.dylib /usr/X11/lib/ libfontconfig.dylib I noticed there were other -emails about fontconfig. Are these issues related maybe? Cheers, Francis Setting runtime build-lock... dpkg-deb -b /sw/src/fink.build/root-fink-buildlock-fontconfig2- dev-2.4.1-104 /sw/src/fink.build dpkg-deb: building package `fink-buildlock-fontconfig2-dev-2.4.1-104' in `/sw/src/fink.build/fink-buildlock-fontconfig2- dev-2.4.1-104_2008.11.29-09.42.44_darwin-i386.deb'. Installing build-lock package... /sw/bin/dpkg-lockwait -i /sw/src/fink.build/fink-buildlock-fontconfig2- dev-2.4.1-104_2008.11.29-09.42.44_darwin-i386.deb Selecting previously deselected package fink-buildlock-fontconfig2- dev-2.4.1-104. (Reading database ... 21895 files and directories currently installed.) Unpacking fink-buildlock-fontconfig2-dev-2.4.1-104 (from .../fink- buildlock-fontconfig2-dev-2.4.1-104_2008.11.29-09.42.44_darwin- i386.deb) ... Setting up fink-buildlock-fontconfig2-dev-2.4.1-104 (2008.11.29-09.42.44) ... echo no compilation necessary no compilation necessary /bin/rm -rf /sw/src/fink.build/root-fontconfig2-dev-2.4.1-104 /bin/mkdir -p /sw/src/fink.build/root-fontconfig2-dev-2.4.1-104/sw /bin/mkdir -p /sw/src/fink.build/root-fontconfig2-dev-2.4.1-104/DEBIAN /usr/sbin/chown -R root:admin /sw/src/fink.build/root-fontconfig2- dev-2.4.1-104 /var/tmp/tmp.1.GOXHMh #!/bin/sh -ev FC_ROOT=/sw/src/fink.build/root-fontconfig2-dev-2.4.1-104/sw/lib/ fontconfig2 FC_LIB=/sw/lib/fontconfig2/lib FT_LIB=/sw/lib/freetype219/lib X11_ROOT=/usr/X11 declare -a bad_files bad_file() { bad_files[${#bad_files[*]}]=$1 } install -d -m 755 $FC_ROOT/{bin,include,lib,lib/pkgconfig} for file in \ fcfreetype.h \ fcprivate.h \ fontconfig.h \ ; do [ -e $X11_ROOT/include/fontconfig/$file ] || bad_file $X11_ROOT/ include/fontconfig/$file done for file in \ include/fontconfig \ lib/libfontconfig.1.dylib \ lib/libfontconfig.dylib \ bin/fc-cache \ bin/fc-cat \ bin/fc-list \ bin/fc-match \ ; do [ -e $X11_ROOT/$file ] || bad_file $X11_ROOT/$file /bin/ln -sfh $X11_ROOT/$file $FC_ROOT/$file done # Use fink's freetype219 and expat1 sed -e s|-L$X11_ROOT/lib||g \ -e s|$X11_ROOT/lib/libfreetype.la|-L$FT_LIB $FT_LIB/ libfreetype.la| \ -e s|/usr/lib/libexpat.la|-L/sw/lib /sw/lib/libexpat.la| \ -e s|libdir=$X11_ROOT/lib|libdir=$FC_LIB| \ $X11_ROOT/lib/libfontconfig.la $FC_ROOT/lib/libfontconfig.fink.la sed: can't read /usr/X11/lib/libfontconfig.la: No such file or directory ### execution of /var/tmp/tmp.1.GOXHMh failed, exit code 2 Removing runtime build-lock... Removing build-lock package... /sw/bin/dpkg-lockwait -r fink-buildlock-fontconfig2-dev-2.4.1-104 (Reading database ... 21896 files and directories currently installed.) Removing fink-buildlock-fontconfig2-dev-2.4.1-104 ... Failed: phase installing: fontconfig2-dev-2.4.1-104 failed On 28-Nov-08, at 4:57 PM, Alexander Hansen wrote: On Nov 28, 2008, at 12:11 PM, Francis Poulin wrote: Hello, I am running OS 10.5 on my MacBook Pro with XCode 3.1.2. I recently had to install everything from scratch because of a dead hard drive. When I try running gnuplot I get the following errors. This also comes up when I try any plotting with octave. Any suggestions? Thanks, Francis dyld: Library not loaded: /usr/X11/lib/libpng12.0.dylib Referenced from: /sw/lib/libgd.2.dylib Reason: Incompatible library version: libgd.2.dylib requires version 25.0.0 or later, but libpng12.0.dylib provides version 1.0.0 /sw/bin/gnuplot: line 6: 26403 Trace/BPT trap /sw/bin/ gnuplotx $@ There are two problems here. The first is that libgd really needs to ensure that it links to fink's libpng3. The other is that it looks like your X11 stuff is older than what your gd2 was built with (if you got it from the binary distribution this would be the case). The X11 update from 10.5.2 should suffice. Also: I don't think we're quite ready to support Xcode 3.1.2--you may encounter difficulties in building packages. - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications
Re: [Fink-users] libpng12.0.dylib not loaded
Francis Poulin wrote: Hello, (Mac 10.5.5, Xcode 3.1.2 on my MacBook Pro) I updated my system to 10.5.5 and I now have X11 2.1.5. Unfortunately, when I try and update-all I get the following message. It seems that there's a problem finding usr/X11/lib/libfontconfig.la The problem is that the X11SDK.pkg from xcode-3.1.2 does no longer provide these *.la files which the libtool build system - and therefore Fink - relies on. Until Fink finds a strategy to deal with this situation, you have to use one of the following workarounds: 1. Either install one of the older X11SDK.pkg's from an earlier xcode version, 3.0 or 3.1.1. Then reinstall the X11SDK.pkg from xcode-3.1.2 on top of it. In this way, you will get to keep the *.la files from the older X11SDK.pkg. These have various bugs, depending on which xcode version they come from (this is the reason Apple nuked them - they didn't seem capable of fixing the bugs definitively, because the guys who prepare the X11User.pkg and the ones who prepare the X11SDK.pkg are not in sync.) 2. Or switch to the latest of the xquartz updates from the macosforge site. Until now, these still have the *.la files (they also come in a single package, the artificial split into X11User.pkg and X11SDK.pkg hasn't happened there.) They have threatened, though, that one of the next versions will come without *.la files, too. Currently, the workaround 2 is more bug-free, but you have to be aware of the fact that if you switch to the xquartz update, you will be pretty much unable to switch back to stock Leopard X11. -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] fontconfig2-dev-2.4.1-104
Dear Martin, 1. Mac OSX 10.5.5 2. X11-2.31 2.1. Xcode311-2517 3. fink list xfree86 *i* xfree86 4.5.0-1045 Free X11 implementation *i* xfree86-shlibs 4.5.0-1045 Free X11 implementation 4. fink-virtual-pkgs --debuglist_x11 list_x11.gz Description: GNU Zip compressed data regards, Akio On 2008/11/29, at 20:30, Martin Costabel wrote: Akio Sakai wrote: Hi $ fink update-all Information about 7480 packages read in 1 seconds. Can't resolve dependency system-xfree86-dev (= 2:7.2-1) for package fontconfig2-dev-2.4.1-104 (no matching packages/versions found) Exiting with failure. What is wrong? Hard to say without further information about your situation. For starters, tell us 1. Which version of MacOSX you are running 2. Which X11 do you have installed 3. What does fink list xfree86 show? -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] fontconfig2-dev-2.4.1-104
Akio Sakai wrote: Dear Martin, 1. Mac OSX 10.5.5 2. X11-2.31 2.1. Xcode311-2517 3. fink list xfree86 *i* xfree86 4.5.0-1045 Free X11 implementation *i* xfree86-shlibs 4.5.0-1045 Free X11 implementation You have an old X11 package for MacOSX 10.4 from Fink installed. Remove it: sudo -r --force-depends xfree86 xfree86-shlibs Then reinstall whatever X11 installation you had (either X11User.pkg from a system DVD or from a combo update dmg + X11SDK.pkg from xcode dev tools, or xquartz from the macosforge site. The latter is the easiest: download and install http://xquartz.macosforge.org/downloads/X11-2.3.1.pkg -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Cannot switch to unstable tree
Hi, I'm starting over with a new Fink installation after having completely uninstalled the old one. Everything seems to work fine until I try to configure Fink to use the unstable tree. I simply run fink configure, leaving all options at the default except the one about unstable, then I run fink selfupdate. I've tried several times, but it never works. The cause seems to be File not found errors while running selfupdate. I've attached a console log; can anyone diagnose it? Thanks, Trevor ~/Desktop$ fink selfupdate curl --connect-timeout 30 -f -L -A 'fink/0.27.13' -O http://www.finkproject.org/CURRENT-FINK-10.5 % Total% Received % Xferd Average Speed TimeTime Time Current Dload Upload Total SpentLeft Speed 0130130 0 55 0 --:--:-- --:--:-- --:--:-- 0 I will now download the package descriptions for Fink 10.5-0.9.0.2 and update the core packages. After that, you should update the other packages using commands like 'fink update-all'. curl --connect-timeout 30 -f -L -A 'fink/0.27.13' -O http://west.dl.sourceforge.net/sourceforge/fink/dists-10.5-0.9.0.2.tar.gz curl: (7) couldn't connect to host ### execution of curl failed, exit code 7 Downloading the file dists-10.5-0.9.0.2.tar.gz failed. (1) Give up (2) Retry the same mirror (3) Retry another mirror from your country (4) Retry another mirror from your continent (5) Retry another mirror How do you want to proceed? [3] 5 curl --connect-timeout 30 -f -L -A 'fink/0.27.13' -O http://optusnet.dl.sourceforge.net/sourceforge/fink/dists-10.5-0.9.0.2.tar.gz % Total% Received % Xferd Average Speed TimeTime Time Current Dload Upload Total SpentLeft Speed 100 19750 100 197500 0 11708 0 0:00:01 0:00:01 --:--:-- 45652 tar -xzf dists-10.5-0.9.0.2.tar.gz ./inject.pl /sw -quiet /bin/mkdir -p -m755 /sw/fink/10.5 Copying... /bin/cp -f README /sw/fink/10.5/; /bin/chmod 644 /sw/fink/10.5/README /bin/cp -f VERSION /sw/fink/10.5/; /bin/chmod 644 /sw/fink/10.5/VERSION /bin/cp -f DISTRIBUTION /sw/fink/10.5/; /bin/chmod 644 /sw/fink/10.5/DISTRIBUTION mv /sw/fink/10.5/stamp-rel-0.9.0 /sw/fink/10.5/bak.stamp-rel-0.9.0 rm -f /sw/fink/10.5/stamp-* mv /sw/fink/10.5/bak.stamp-rel-0.9.0 /sw/fink/10.5/stamp-rel-0.9.0 cp stamp-* /sw/fink/10.5/ /bin/cp -f fink-10.5.info /sw/fink/10.5/stable/main/finkinfo/base/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/base/fink-10.5.info /bin/cp -f fink-mirrors.info /sw/fink/10.5/stable/main/finkinfo/base/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/base/fink-mirrors.info /bin/cp -f xinvaders.info /sw/fink/10.5/stable/main/finkinfo/games/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/games/xinvaders.info /bin/cp -f xinvaders.patch /sw/fink/10.5/stable/main/finkinfo/games/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/games/xinvaders.patch /bin/cp -f mc.info /sw/fink/10.5/stable/main/finkinfo/gnome/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/gnome/mc.info /bin/cp -f librsync.info /sw/fink/10.5/stable/main/finkinfo/libs/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/libs/librsync.info /bin/cp -f bash.info /sw/fink/10.5/stable/main/finkinfo/shells/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/shells/bash.info /bin/cp -f bash.patch /sw/fink/10.5/stable/main/finkinfo/shells/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/shells/bash.patch /bin/cp -f xpdf.info /sw/fink/10.5/stable/main/finkinfo/text/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/text/xpdf.info /bin/cp -f xpdf.patch /sw/fink/10.5/stable/main/finkinfo/text/; /bin/chmod 644 /sw/fink/10.5/stable/main/finkinfo/text/xpdf.patch Your Fink installation in '/sw' was updated with new package description files. Please update the package manager using 'fink update fink', then use appropriate commands to update the other packages, e.g. 'fink update-all'. Downloading the indexes of available packages in the binary distribution. /sw/bin/apt-get-lockwait -q update Err file: unstable/main Packages File not found Ign file: unstable/main Release Err file: unstable/crypto Packages File not found Ign file: unstable/crypto Release Hit http://bindist.finkmirrors.net 10.5/release/main Packages Hit http://bindist.finkmirrors.net 10.5/release/main Release Hit http://bindist.finkmirrors.net 10.5/release/crypto Packages Hit http://bindist.finkmirrors.net 10.5/release/crypto Release Get:1 http://bindist.finkmirrors.net 10.5/current/main Packages [2261B] Hit http://bindist.finkmirrors.net 10.5/current/main Release Get:2 http://bindist.finkmirrors.net 10.5/current/crypto Packages [20B] Hit http://bindist.finkmirrors.net 10.5/current/crypto Release Fetched 2281B in 0s (4454B/s) Failed to fetch file:/sw/fink/dists/unstable/main/binary-darwin-i386/Packages File not found Failed to fetch
Re: [Fink-users] Cannot switch to unstable tree
You need to run fink selfupdate-rsync rather than fink selfupdate. -- Dave On Nov 29, 2008, at 10:01 AM, Trevor Harmon wrote: Hi, I'm starting over with a new Fink installation after having completely uninstalled the old one. Everything seems to work fine until I try to configure Fink to use the unstable tree. I simply run fink configure, leaving all options at the default except the one about unstable, then I run fink selfupdate. I've tried several times, but it never works. The cause seems to be File not found errors while running selfupdate. I've attached a console log; can anyone diagnose it? Thanks, Trevor fink_selfupdate_failure.txt - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Cannot switch to unstable tree
On Nov 29, 2008, at 1:30 PM, David R. Morrison wrote: You need to run fink selfupdate-rsync rather than fink selfupdate. Thanks, but even with selfupdate-rsync, I'm still getting File Not Found errors and WARNING: Failure while updating indexes. Here's the exact sequence of steps I'm following: 1. Wipe out the previous Fink installation with sudo rm -rf /sw 2. Run Fink 0.9.0 Binary Installer for Intel (I'm on a MacBook Pro with OS X 10.5.5) 3. Run fink selfupdate 4. Run fink configure, leaving all options at the default except the one about unstable 5. Run fink selfupdate-rsync I've pasted below a log showing some of the errors I get in step 5. Am I still doing something wrong? Thanks, Trevor ~/Desktop$ fink selfupdate-rsync Please note: the command 'fink selfupdate' should be used for routine updating; you only need to use 'fink selfupdate-cvs' or 'fink selfupdate-rsync' if you are changing your update method. The current selfupdate method is point. Do you wish to change the default selfupdate method to rsync? [Y/n] rsync -az -q rsync://distfiles.master.finkmirrors.net/finkinfo// TIMESTAMP /sw/fink/TIMESTAMP.tmp I will now run the rsync command to retrieve the latest package descriptions. rsync -rtz --delete-after --delete -q --include='10.4/' -- include='10.4/stable/' --include='10.4/stable/main/' --include='10.4/ stable/main/finkinfo/' --include='10.4/stable/main/finkinfo/*/' -- include='10.4/stable/main/finkinfo/*' --include='10.4/stable/main/ finkinfo/**/*' --include='10.4/' --include='10.4/stable/' -- include='10.4/stable/crypto/' --include='10.4/stable/crypto/finkinfo/' --include='10.4/stable/crypto/finkinfo/*/' --include='10.4/stable/ crypto/finkinfo/*' --include='10.4/stable/crypto/finkinfo/**/*' -- include='10.4/' --include='10.4/unstable/' --include='10.4/unstable/ main/' --include='10.4/unstable/main/finkinfo/' --include='10.4/ unstable/main/finkinfo/*/' --include='10.4/unstable/main/finkinfo/*' -- include='10.4/unstable/main/finkinfo/**/*' --include='10.4/' -- include='10.4/unstable/' --include='10.4/unstable/crypto/' -- include='10.4/unstable/crypto/finkinfo/' --include='10.4/unstable/ crypto/finkinfo/*/' --include='10.4/unstable/crypto/finkinfo/*' -- include='10.4/unstable/crypto/finkinfo/**/*' --include='VERSION' -- include='DISTRIBUTION' --include='README' --exclude='**' 'rsync:// distfiles.master.finkmirrors.net/finkinfo' '/sw/fink/' /usr/bin/find '/sw/fink/10.4/stable/main' -name CVS -type d -print0 | xargs -0 /bin/rm -rf /usr/bin/find '/sw/fink/10.4/stable/crypto' -name CVS -type d -print0 | xargs -0 /bin/rm -rf /usr/bin/find '/sw/fink/10.4/unstable/main' -name CVS -type d -print0 | xargs -0 /bin/rm -rf /usr/bin/find '/sw/fink/10.4/unstable/crypto' -name CVS -type d - print0 | xargs -0 /bin/rm -rf Downloading the indexes of available packages in the binary distribution. /sw/bin/apt-get-lockwait -q update Err file: unstable/main Packages File not found Ign file: unstable/main Release Err file: unstable/crypto Packages File not found Ign file: unstable/crypto Release Hit http://bindist.finkmirrors.net 10.5/release/main Packages Hit http://bindist.finkmirrors.net 10.5/release/main Release Hit http://bindist.finkmirrors.net 10.5/release/crypto Packages Hit http://bindist.finkmirrors.net 10.5/release/crypto Release Hit http://bindist.finkmirrors.net 10.5/current/main Packages Hit http://bindist.finkmirrors.net 10.5/current/main Release Hit http://bindist.finkmirrors.net 10.5/current/crypto Packages Hit http://bindist.finkmirrors.net 10.5/current/crypto Release Failed to fetch file:/sw/fink/dists/unstable/main/binary-darwin-i386/ Packages File not found Failed to fetch file:/sw/fink/dists/unstable/crypto/binary-darwin-i386/ Packages File not found Reading Package Lists... Building Dependency Tree... W: Couldn't stat source package list file: unstable/main Packages (/sw/ var/lib/apt/lists/_sw_fink_dists_unstable_main_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list file: unstable/crypto Packages (/ sw/var/lib/apt/lists/_sw_fink_dists_unstable_crypto_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list file: unstable/main Packages (/sw/ var/lib/apt/lists/_sw_fink_dists_unstable_main_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list file: unstable/crypto Packages (/ sw/var/lib/apt/lists/_sw_fink_dists_unstable_crypto_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: You may want to run apt-get update to correct these problems E: Some index files failed to download, they have been ignored, or old ones used instead. ### execution of /sw/bin/apt-get-lockwait failed, exit code 100 WARNING: Failure while updating indexes. . . . - This SF.Net email is sponsored by the
Re: [Fink-users] fontconfig2-dev-2.4.1-104
Dear Martin, sudo -r --force-depends xfree86 xfree86-shlibs sudo: illegal option `-r' Instead, I ran sudo dpkg --remove --force-depends xorg xorg-shlibs Is it right? I received several error message(in Japanese). Regards, Akio On 2008/11/30, at 2:30, Martin Costabel wrote: Akio Sakai wrote: Dear Martin, 1. Mac OSX 10.5.5 2. X11-2.31 2.1. Xcode311-2517 3. fink list xfree86 *i* xfree86 4.5.0-1045 Free X11 implementation *i* xfree86-shlibs 4.5.0-1045 Free X11 implementation You have an old X11 package for MacOSX 10.4 from Fink installed. Remove it: sudo -r --force-depends xfree86 xfree86-shlibs Then reinstall whatever X11 installation you had (either X11User.pkg from a system DVD or from a combo update dmg + X11SDK.pkg from xcode dev tools, or xquartz from the macosforge site. The latter is the easiest: download and install http://xquartz.macosforge.org/downloads/X11-2.3.1.pkg -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Fwd: fontconfig2-dev-2.4.1-104
Erratum sudo dpkg --remove --force-depends xorg xorg-shlibs shall be read sudo dpkg --remove --force-depends xfree86 xfree86- shlibs Begin forwarded message: 差出人: Akio Sakai [EMAIL PROTECTED] 日時: 2008年11月30日 3:52:24:JST 宛先: Martin Costabel [EMAIL PROTECTED] Cc: Users Fink Fink-users@lists.sourceforge.net, Alexander Hansen [EMAIL PROTECTED] 件名: Re: [Fink-users] fontconfig2-dev-2.4.1-104 Dear Martin, sudo -r --force-depends xfree86 xfree86-shlibs sudo: illegal option `-r' Instead, I ran sudo dpkg --remove --force-depends xorg xorg-shlibs Is it right? I received several error message(in Japanese). Regards, Akio On 2008/11/30, at 2:30, Martin Costabel wrote: Akio Sakai wrote: Dear Martin, 1. Mac OSX 10.5.5 2. X11-2.31 2.1. Xcode311-2517 3. fink list xfree86 *i* xfree86 4.5.0-1045 Free X11 implementation *i* xfree86-shlibs 4.5.0-1045 Free X11 implementation You have an old X11 package for MacOSX 10.4 from Fink installed. Remove it: sudo -r --force-depends xfree86 xfree86-shlibs Then reinstall whatever X11 installation you had (either X11User.pkg from a system DVD or from a combo update dmg + X11SDK.pkg from xcode dev tools, or xquartz from the macosforge site. The latter is the easiest: download and install http://xquartz.macosforge.org/downloads/X11-2.3.1.pkg -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] Fwd: Fwd: fontconfig2-dev-2.4.1-104
Dear Martin, Error messages in english; sudo dpkg --remove --force-depends xfree86 xfree86-shlibs dpkg: xfree86-shlibs: dependencies have problems, but according to the requests it is being removed xfree86 is dependent on xfree86-shlibs (= 4.5.0-1045). qt3-shlibs is dependent on libgl-shlibs, but package libgl-shlibs is not installed. Package xfree86-shlibs provides libgl-shlibs and is being removed. qt3-shlibs is dependent on x11-shlibs, but x11-shlibs is not installed. etc. Summing up, x11-shlibs and x11 (or xfree86 and xfree86-shlibs) were not installed. Please refer to my first mail on it. regards, Akio Begin forwarded message: 差出人: Akio Sakai [EMAIL PROTECTED] 日時: 2008年11月30日 3:56:22:JST 宛先: Martin Costabel [EMAIL PROTECTED] Cc: Users Fink Fink-users@lists.sourceforge.net, Alexander Hansen [EMAIL PROTECTED] 件名: [Fink-users] Fwd: fontconfig2-dev-2.4.1-104 Erratum sudo dpkg --remove --force-depends xorg xorg-shlibs shall be read sudo dpkg --remove --force-depends xfree86 xfree86- shlibs Begin forwarded message: 差出人: Akio Sakai [EMAIL PROTECTED] 日時: 2008年11月30日 3:52:24:JST 宛先: Martin Costabel [EMAIL PROTECTED] Cc: Users Fink Fink-users@lists.sourceforge.net, Alexander Hansen [EMAIL PROTECTED] 件名: Re: [Fink-users] fontconfig2-dev-2.4.1-104 Dear Martin, sudo -r --force-depends xfree86 xfree86-shlibs sudo: illegal option `-r' Instead, I ran sudo dpkg --remove --force-depends xorg xorg-shlibs Is it right? I received several error message(in Japanese). Regards, Akio On 2008/11/30, at 2:30, Martin Costabel wrote: Akio Sakai wrote: Dear Martin, 1. Mac OSX 10.5.5 2. X11-2.31 2.1. Xcode311-2517 3. fink list xfree86 *i* xfree86 4.5.0-1045 Free X11 implementation *i* xfree86-shlibs 4.5.0-1045 Free X11 implementation You have an old X11 package for MacOSX 10.4 from Fink installed. Remove it: sudo -r --force-depends xfree86 xfree86-shlibs Then reinstall whatever X11 installation you had (either X11User.pkg from a system DVD or from a combo update dmg + X11SDK.pkg from xcode dev tools, or xquartz from the macosforge site. The latter is the easiest: download and install http://xquartz.macosforge.org/downloads/X11-2.3.1.pkg -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Fwd: fontconfig2-dev-2.4.1-104
On Nov 29, 2008, at 2:12 PM, Akio Sakai wrote: Dear Martin, Error messages in english; sudo dpkg --remove --force-depends xfree86 xfree86-shlibs dpkg: xfree86-shlibs: dependencies have problems, but according to the requests it is being removed xfree86 is dependent on xfree86-shlibs (= 4.5.0-1045). qt3-shlibs is dependent on libgl-shlibs, but package libgl-shlibs is not installed. Package xfree86-shlibs provides libgl-shlibs and is being removed. qt3-shlibs is dependent on x11-shlibs, but x11-shlibs is not installed. etc. Summing up, x11-shlibs and x11 (or xfree86 and xfree86-shlibs) were not installed. Please refer to my first mail on it. regards, Akio On the contrary: the messages above indicate that the xfree86-shlibs and xfree86 packages *were* installed (as your 'fink list' indicated) but are not any longer. You should now be able to reinstall your Leopard X11. - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Cannot switch to unstable tree
On Nov 29, 2008, at 1:43 PM, Trevor Harmon wrote: On Nov 29, 2008, at 1:30 PM, David R. Morrison wrote: You need to run fink selfupdate-rsync rather than fink selfupdate. Thanks, but even with selfupdate-rsync, I'm still getting File Not Found errors and WARNING: Failure while updating indexes. Here's the exact sequence of steps I'm following: 1. Wipe out the previous Fink installation with sudo rm -rf /sw 2. Run Fink 0.9.0 Binary Installer for Intel (I'm on a MacBook Pro with OS X 10.5.5) 3. Run fink selfupdate 4. Run fink configure, leaving all options at the default except the one about unstable 5. Run fink selfupdate-rsync I've pasted below a log showing some of the errors I get in step 5. Am I still doing something wrong? Thanks, Trevor ~/Desktop$ fink selfupdate-rsync Please note: the command 'fink selfupdate' should be used for routine updating; you only need to use 'fink selfupdate-cvs' or 'fink selfupdate-rsync' if you are changing your update method. The current selfupdate method is point. Do you wish to change the default selfupdate method to rsync? [Y/n] rsync -az -q rsync://distfiles.master.finkmirrors.net/finkinfo// TIMESTAMP /sw/fink/TIMESTAMP.tmp I will now run the rsync command to retrieve the latest package descriptions. rsync -rtz --delete-after --delete -q --include='10.4/' -- include='10.4/stable/' --include='10.4/stable/main/' --include='10.4/ stable/main/finkinfo/' --include='10.4/stable/main/finkinfo/*/' -- include='10.4/stable/main/finkinfo/*' --include='10.4/stable/main/ finkinfo/**/*' --include='10.4/' --include='10.4/stable/' -- include='10.4/stable/crypto/' --include='10.4/stable/crypto/finkinfo/' --include='10.4/stable/crypto/finkinfo/*/' --include='10.4/stable/ crypto/finkinfo/*' --include='10.4/stable/crypto/finkinfo/**/*' -- include='10.4/' --include='10.4/unstable/' --include='10.4/unstable/ main/' --include='10.4/unstable/main/finkinfo/' --include='10.4/ unstable/main/finkinfo/*/' --include='10.4/unstable/main/finkinfo/*' -- include='10.4/unstable/main/finkinfo/**/*' --include='10.4/' -- include='10.4/unstable/' --include='10.4/unstable/crypto/' -- include='10.4/unstable/crypto/finkinfo/' --include='10.4/unstable/ crypto/finkinfo/*/' --include='10.4/unstable/crypto/finkinfo/*' -- include='10.4/unstable/crypto/finkinfo/**/*' --include='VERSION' -- include='DISTRIBUTION' --include='README' --exclude='**' 'rsync:// distfiles.master.finkmirrors.net/finkinfo' '/sw/fink/' /usr/bin/find '/sw/fink/10.4/stable/main' -name CVS -type d -print0 | xargs -0 /bin/rm -rf /usr/bin/find '/sw/fink/10.4/stable/crypto' -name CVS -type d -print0 | xargs -0 /bin/rm -rf /usr/bin/find '/sw/fink/10.4/unstable/main' -name CVS -type d -print0 | xargs -0 /bin/rm -rf /usr/bin/find '/sw/fink/10.4/unstable/crypto' -name CVS -type d - print0 | xargs -0 /bin/rm -rf Downloading the indexes of available packages in the binary distribution. /sw/bin/apt-get-lockwait -q update Err file: unstable/main Packages File not found Ign file: unstable/main Release Err file: unstable/crypto Packages File not found Ign file: unstable/crypto Release Hit http://bindist.finkmirrors.net 10.5/release/main Packages Hit http://bindist.finkmirrors.net 10.5/release/main Release Hit http://bindist.finkmirrors.net 10.5/release/crypto Packages Hit http://bindist.finkmirrors.net 10.5/release/crypto Release Hit http://bindist.finkmirrors.net 10.5/current/main Packages Hit http://bindist.finkmirrors.net 10.5/current/main Release Hit http://bindist.finkmirrors.net 10.5/current/crypto Packages Hit http://bindist.finkmirrors.net 10.5/current/crypto Release Failed to fetch file:/sw/fink/dists/unstable/main/binary-darwin-i386/ Packages File not found Failed to fetch file:/sw/fink/dists/unstable/crypto/binary-darwin- i386/ Packages File not found Reading Package Lists... Building Dependency Tree... W: Couldn't stat source package list file: unstable/main Packages (/ sw/ var/lib/apt/lists/_sw_fink_dists_unstable_main_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list file: unstable/crypto Packages (/ sw/var/lib/apt/lists/_sw_fink_dists_unstable_crypto_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list file: unstable/main Packages (/ sw/ var/lib/apt/lists/_sw_fink_dists_unstable_main_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: Couldn't stat source package list file: unstable/crypto Packages (/ sw/var/lib/apt/lists/_sw_fink_dists_unstable_crypto_binary-darwin- i386_Packages) - stat (2 No such file or directory) W: You may want to run apt-get update to correct these problems E: Some index files failed to download, they have been ignored, or old ones used instead. ### execution of /sw/bin/apt-get-lockwait failed, exit code 100 WARNING: Failure while updating indexes. . . . Solve this
Re: [Fink-users] Fwd: fontconfig2-dev-2.4.1-104
Akio Sakai wrote: Erratum sudo dpkg --remove --force-depends xorg xorg-shlibs shall be read sudo dpkg --remove --force-depends xfree86 xfree86-shlibs Yes, sorry, I forgot the dpkg. -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Fwd: fontconfig2-dev-2.4.1-104
Dear Alex, After reinstalling X11-2.31 and xcode311_2517, $ fink update-all Information about 7474 packages read in 1 seconds. Can't resolve dependency system-xfree86-dev (= 2:7.2-1) for package fontconfig2-dev-2.4.1-104 (no matching packages/versions found) Exiting with failure. (Actually the same reprocess had been done though the number of package seemed to be reduced now - refer to the first mail) Is it more specific to fontconfig2-dev-2.4.1-104 or more general? Regards, Akio On 2008/11/30, at 4:22, Alexander Hansen wrote: On Nov 29, 2008, at 2:12 PM, Akio Sakai wrote: Dear Martin, Error messages in english; sudo dpkg --remove --force-depends xfree86 xfree86-shlibs dpkg: xfree86-shlibs: dependencies have problems, but according to the requests it is being removed xfree86 is dependent on xfree86-shlibs (= 4.5.0-1045). qt3-shlibs is dependent on libgl-shlibs, but package libgl-shlibs is not installed. Package xfree86-shlibs provides libgl-shlibs and is being removed. qt3-shlibs is dependent on x11-shlibs, but x11-shlibs is not installed. etc. Summing up, x11-shlibs and x11 (or xfree86 and xfree86-shlibs) were not installed. Please refer to my first mail on it. regards, Akio On the contrary: the messages above indicate that the xfree86- shlibs and xfree86 packages *were* installed (as your 'fink list' indicated) but are not any longer. You should now be able to reinstall your Leopard X11. - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] Fwd: fontconfig2-dev-2.4.1-104
Akio Sakai wrote: Dear Alex, After reinstalling X11-2.31 and xcode311_2517, Do you mean by this that you installed first X11-2.3.1 from macosforge/xquartz and then X11SDK.pkg from xcode-3.1.1? Don't do this. Install *either* X11User.pkg plus X11SDK.pkg *or* the xquartz update. $ fink update-all Information about 7474 packages read in 1 seconds. Can't resolve dependency system-xfree86-dev (= 2:7.2-1) for package fontconfig2-dev-2.4.1-104 (no matching packages/versions found) Exiting with failure. Same question as the first time: What does fink list xfree86 show? -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] gstreamer-0.10-0.10.21-1
Hello again, (Mac 10.5.5, Xcode 3.1.2, MacBook Pro) Thanks to Martin I fixed the X11 issue. However, when I do update-all it gets stuck on install gstream. Is this another problem with Xcode 3.1.2? If so then maybe I'll install an earlier version. Cheers, Francis Setting runtime build-lock... dpkg-deb -b /sw/src/fink.build/root-fink-buildlock- gstreamer-0.10-0.10.21-1 /sw/src/fink.build dpkg-deb: building package `fink-buildlock-gstreamer-0.10-0.10.21-1' in `/sw/src/fink.build/fink-buildlock- gstreamer-0.10-0.10.21-1_2008.11.29-17.14.14_darwin-i386.deb'. Installing build-lock package... /sw/bin/dpkg-lockwait -i /sw/src/fink.build/fink-buildlock- gstreamer-0.10-0.10.21-1_2008.11.29-17.14.14_darwin-i386.deb Selecting previously deselected package fink-buildlock- gstreamer-0.10-0.10.21-1. (Reading database ... 41181 files and directories currently installed.) Unpacking fink-buildlock-gstreamer-0.10-0.10.21-1 (from .../fink- buildlock-gstreamer-0.10-0.10.21-1_2008.11.29-17.14.14_darwin- i386.deb) ... Setting up fink-buildlock-gstreamer-0.10-0.10.21-1 (2008.11.29-17.14.14) ... bzip2 -dc /sw/src/gstreamer-0.10.21.tar.bz2 | /sw/bin/tar -xf - --no- same-owner --no-same-permissions [ -r /sw/fink/dists/unstable/main/finkinfo/gnome/gstreamer-0.10.patch ] patch -p1 /sw/fink/dists/unstable/main/finkinfo/gnome/ gstreamer-0.10.patch patching file docs/plugins/Makefile.am patching file gst/Makefile.am patching file gst/parse/Makefile.am patching file libs/gst/base/Makefile.am patching file libs/gst/check/Makefile.am patching file libs/gst/controller/Makefile.am patching file libs/gst/dataprotocol/Makefile.am patching file libs/gst/net/Makefile.am patching file plugins/elements/Makefile.am patching file plugins/indexers/Makefile.am patching file tests/benchmarks/Makefile.am patching file tests/check/Makefile.am patching file tests/examples/adapter/Makefile.am patching file tests/examples/controller/Makefile.am patching file tests/examples/helloworld/Makefile.am patching file tests/examples/launch/Makefile.am patching file tests/examples/metadata/Makefile.am patching file tests/examples/queue/Makefile.am patching file tests/examples/typefind/Makefile.am patching file tests/examples/xml/Makefile.am patching file tools/Makefile.am /var/tmp/tmp.1.7Mgx1C + export PATH=/sw/lib/flex/bin:/sw/var/lib/fink/path-prefix-g++-4.0:/ sw/bin:/sw/sbin:/bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin + PATH=/sw/lib/flex/bin:/sw/var/lib/fink/path-prefix-g++-4.0:/sw/bin:/ sw/sbin:/bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin + export ac_cv_path_PYTHON=/sw/bin/python2.5 + ac_cv_path_PYTHON=/sw/bin/python2.5 + automake aclocal.m4:16: warning: this file was generated for autoconf 2.61. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:12: version mismatch. This is Automake 1.10.2, configure.ac:12: but the definition used by this AM_INIT_AUTOMAKE configure.ac:12: comes from Automake 1.10.1. You should recreate configure.ac:12: aclocal.m4 with aclocal and run automake again. docs/faq/Makefile.am:11: notdir $(wildcard $(srcdir: non-POSIX variable name docs/faq/Makefile.am:11: (probably a GNU make extension) docs/faq/Makefile.am:17: notdir $(wildcard $(srcdir: non-POSIX variable name docs/faq/Makefile.am:17: (probably a GNU make extension) docs/faq/../manuals.mak:13: strip $(PNG_SRC: non-POSIX variable name docs/faq/../manuals.mak:13: (probably a GNU make extension) docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:15: strip $(FIG_SRC: non-POSIX variable name docs/faq/../manuals.mak:15: (probably a GNU make extension) docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:17: strip $(FIG_SRC: non-POSIX variable name docs/faq/../manuals.mak:17: (probably a GNU make extension) docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:21: foreach file, $(PNG: non-POSIX variable name docs/faq/../manuals.mak:21: (probably a GNU make extension) docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:22: foreach file, $(EPS: non-POSIX variable name docs/faq/../manuals.mak:22: (probably a GNU make extension) docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:23: foreach file, $(PDF: non-POSIX variable name docs/faq/../manuals.mak:23: (probably a GNU make extension) docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:138: `%'-style pattern rules are a GNU make extension docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included from here docs/faq/../manuals.mak:143: `%'-style pattern rules are a GNU make extension docs/faq/Makefile.am:25: `docs/faq/../manuals.mak' included
Re: [Fink-users] gstreamer-0.10-0.10.21-1
Francis Poulin wrote: Hello again, (Mac 10.5.5, Xcode 3.1.2, MacBook Pro) Thanks to Martin I fixed the X11 issue. However, when I do update-all it gets stuck on install gstream. Is this another problem with Xcode 3.1.2? If so then maybe I'll install an earlier version. [] + export ac_cv_path_PYTHON=/sw/bin/python2.5 + ac_cv_path_PYTHON=/sw/bin/python2.5 + automake aclocal.m4:16: warning: this file was generated for autoconf 2.61. You have another version of autoconf. It may work, but is not guaranteed to. If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'. configure.ac:12: version mismatch. This is Automake 1.10.2, configure.ac:12: but the definition used by this AM_INIT_AUTOMAKE configure.ac:12: comes from Automake 1.10.1. You should recreate configure.ac:12: aclocal.m4 with aclocal and run automake again. This was fixed in the gstreamer package a couple of hours ago. A selfupdate should bring it to you. -- Martin - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] control-center vs. gnome-settings-daemon
OS10.5.5, X11 2.3.1, XCode 3.1.1 control-center 2.24.0-1 and gnome-settings-daemon appear to be competing; so far, neither has won. . . . Reading build conflict for control-center-2.24.0.1-1... Reading build conflict for control-center2-shlibs-2.24.0.1-1... The package 'gnome-settings-daemon-dev' will be installed. Reading dependency for gnome-settings-daemon-dev-2.24.0-1... The following 2 packages will be installed or updated: control-center control-center2-shlibs The following additional package will be installed: gnome-settings-daemon-dev Do you want to continue? [Y/n] Reading buildlock packages... All buildlocks accounted for. /sw/bin/dpkg-lockwait -i /sw/fink/dists/unstable/main/binary-darwin- powerpc/gnome/gnome-settings-daemon-dev_2.24.0-1_darwin-powerpc.deb (Reading database ... 156743 files and directories currently installed.) Unpacking gnome-settings-daemon-dev (from .../gnome-settings-daemon- dev_2.24.0-1_darwin-powerpc.deb) ... /sw/bin/dpkg: error processing /sw/fink/dists/unstable/main/binary- darwin-powerpc/gnome/gnome-settings-daemon-dev_2.24.0-1_darwin- powerpc.deb (--install): trying to overwrite `/sw/lib/pkgconfig/gnome-settings-daemon.pc', which is also in package control-center Errors were encountered while processing: /sw/fink/dists/unstable/main/binary-darwin-powerpc/gnome/gnome- settings-daemon-dev_2.24.0-1_darwin-powerpc.deb ### execution of /sw/bin/dpkg-lockwait failed, exit code 1 Failed: can't install package gnome-settings-daemon-dev-2.24.0-1 Suppose I'm missing something basic... help, please? Stan - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] control-center vs. gnome-settings-daemon
David- Thank you. I followed your steps, except that I still had bundle-gnome installed and gnome-session was a dependency. So I 1. Removed bundle-gnome 2. Removed gnome-session 3. Removed control-center 4. Installed gnome-settings-daemon 5. Installed control-center (successfully) Gnome crashed on the first start but was happy on the second and subsequent restarts. Regards, Stan On Nov 29, 2008, at 8:33 PM, David Reiser wrote: gnome-settings-daemon used to be part of control-center. Gnome has split them into separate packages, so it's hard to make the upgrade smoothly. The way I got around the conflict was to remove the current version of control-center before trying to install the newer one. The only thing I had installed that depended on control-center was gnome- session, so I removed that first, then control-center. Then the new control-center installed after pulling in gnome-settings-daemon as a dependency. Dave On Nov 29, 2008, at 9:09 PM, Stan Sanderson wrote: OS10.5.5, X11 2.3.1, XCode 3.1.1 control-center 2.24.0-1 and gnome-settings-daemon appear to be competing; so far, neither has won. . . . Reading build conflict for control-center-2.24.0.1-1... Reading build conflict for control-center2-shlibs-2.24.0.1-1... The package 'gnome-settings-daemon-dev' will be installed. Reading dependency for gnome-settings-daemon-dev-2.24.0-1... The following 2 packages will be installed or updated: control-center control-center2-shlibs The following additional package will be installed: gnome-settings-daemon-dev Do you want to continue? [Y/n] Reading buildlock packages... All buildlocks accounted for. /sw/bin/dpkg-lockwait -i /sw/fink/dists/unstable/main/binary-darwin- powerpc/gnome/gnome-settings-daemon-dev_2.24.0-1_darwin-powerpc.deb (Reading database ... 156743 files and directories currently installed.) Unpacking gnome-settings-daemon-dev (from .../gnome-settings-daemon- dev_2.24.0-1_darwin-powerpc.deb) ... /sw/bin/dpkg: error processing /sw/fink/dists/unstable/main/binary- darwin-powerpc/gnome/gnome-settings-daemon-dev_2.24.0-1_darwin- powerpc.deb (--install): trying to overwrite `/sw/lib/pkgconfig/gnome-settings-daemon.pc', which is also in package control-center Errors were encountered while processing: /sw/fink/dists/unstable/main/binary-darwin-powerpc/gnome/gnome- settings-daemon-dev_2.24.0-1_darwin-powerpc.deb ### execution of /sw/bin/dpkg-lockwait failed, exit code 1 Failed: can't install package gnome-settings-daemon-dev-2.24.0-1 Suppose I'm missing something basic... help, please? Stan - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users -- David Reiser [EMAIL PROTECTED] - This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100url=/ ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users