Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On 9/12/05, Viv Kendon [EMAIL PROTECTED] wrote: On Tue, 13 Sep 2005, Martin Costabel wrote: Viv Kendon wrote: [] /sw/bin/dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerp c/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb (--install): trying to overwrite `/sw/lib/openoffice.org/presets/config/standard.sog', which is also in package openoffice.org If it's only this you want to get around, you can force the installation by using sudo dpkg -i --force-overwrite /sw/fink/dists/unstable/main/binary-darwin-powerpc/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb Thank you, that worked, and OOo runs fine so far as I've tested in five minutes. This is a good solution for now: I can't keep up with the rate of changes to OOo, so if I have a version that works for the things I'll use it for, I'll stick with it for a while. Though I do now (as of this afternoon) have a Dual G5 to play with, so maybe I'll see how much faster it compiles...once it has finished a few other basics. -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv No need to do that--you can share the debs from your other machine. -- Alexander K. Hansen Fink Documenter [Day Job] Levitated Dipole Experiment http://psfcwww2.psfc.mit.edu/ldx/ --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On Fri, 9 Sep 2005, Viv Kendon wrote: On Fri, 9 Sep 2005, Viv Kendon wrote: openoffice.org-1.9m121-60 has appeared: I have set it compiling and will 4 days of compiling later I'm not best pleased with the result: /sw/bin/dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerp c/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb (--install): trying to overwrite `/sw/lib/openoffice.org/presets/config/standard.sog', which is also in package openoffice.org /sw/bin/dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /sw/fink/dists/unstable/main/binary-darwin-powerpc/x11/openoffice.org-en-gb_1.9 m121-60_darwin-powerpc.deb ### execution of /sw/bin/dpkg-lockwait failed, exit code 1 Failed: can't install package openoffice.org-en-gb-1.9m121-60 Meanwhile, openoffice.org-en-gb-1.9m121-61 has appeared...before I set it compiling again, could someone tell me if the new version has the same problem? Or whether there is another solution that doesn't involve 4 days of compiling? many thanks, -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
Viv Kendon wrote: [] /sw/bin/dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerp c/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb (--install): trying to overwrite `/sw/lib/openoffice.org/presets/config/standard.sog', which is also in package openoffice.org /sw/bin/dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /sw/fink/dists/unstable/main/binary-darwin-powerpc/x11/openoffice.org-en-gb_1.9 m121-60_darwin-powerpc.deb ### execution of /sw/bin/dpkg-lockwait failed, exit code 1 Failed: can't install package openoffice.org-en-gb-1.9m121-60 If it's only this you want to get around, you can force the installation by using sudo dpkg -i --force-overwrite /sw/fink/dists/unstable/main/binary-darwin-powerpc/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb The packe is built, it only refuses to be installed. There are perhaps more elegant options for dpkg to do this, but this brute-force method should get the package installed. I have no idea, though, what this standard.sog file is and why it is present in both packages. -- Martin --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On Tue, 13 Sep 2005, Martin Costabel wrote: Viv Kendon wrote: [] /sw/bin/dpkg: error processing /sw/fink/dists/unstable/main/binary-darwin-powerp c/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb (--install): trying to overwrite `/sw/lib/openoffice.org/presets/config/standard.sog', which is also in package openoffice.org If it's only this you want to get around, you can force the installation by using sudo dpkg -i --force-overwrite /sw/fink/dists/unstable/main/binary-darwin-powerpc/x11/openoffice.org-en-gb_1.9m121-60_darwin-powerpc.deb Thank you, that worked, and OOo runs fine so far as I've tested in five minutes. This is a good solution for now: I can't keep up with the rate of changes to OOo, so if I have a version that works for the things I'll use it for, I'll stick with it for a while. Though I do now (as of this afternoon) have a Dual G5 to play with, so maybe I'll see how much faster it compiles...once it has finished a few other basics. -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On Fri, 9 Sep 2005, Viv Kendon wrote: ERROR: Error 65280 occurred while making /sw/src/fink.build/ openoffice.org-1.9m121-59/jvmfwk/source openoffice.org-1.9m121-60 has appeared: I have set it compiling and will see what I have by the morning... So far so good: this attempt has proceeded beyond jvmfwk without error. Not finished yet, but fingers crossed... -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
[Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
openoffice compiled nicely for several hours until -- Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3 g++-3.3 -Wl,-multiply_defined,suppress -Wl -dynamiclib -single_module -install_name @executable_path/libjvmfwk.dylib.3 -L../unxmacxp.pro/lib -L/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib -L/usr/X11R6/lib -o ../unxmacxp.pro/lib/libjvmfwk.dylib.3 -dylib_file @executable_path/libuno_cppu.dylib:/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libuno_cppu.dylib -dylib_file @executable_path/libuno_sal.dylib.3:/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libuno_sal.dylib.3 -dylib_file @executable_path/libstlport_gcc.dylib:/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libstlport_gcc.dylib -dylib_file @executable_path/libuno_cppuhelpergcc3.dylib:/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libuno_cppuhelpergcc3.dylib -dylib_file @executable_path/libuno_cppu.dylib.3:/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libuno_cppu.dylib.3 -dylib_file @executable_path/libuno_salhelpergcc3.dylib:/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libuno_salhelpergcc3.dylib -luno_cppu -luno_cppuhelpergcc3 -luno_sal -luno_salhelpergcc3 -lxml2 -lpthread -lstdc++ -lm -lstlport_gcc -filelist ../unxmacxp.pro/misc/libjvmfwk.dylib.list ld: warning -dylib_install_name @executable_path/libjvmfwk.dylib.3 not found in segment address table LD_SEG_ADDR_TABLE /sw/var/lib/fink/prebound/seg_addr_table Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib create-bundle: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib successfully created /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh -L../unxmacxp.pro/lib -L/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib -L/usr/X11R6/lib ../unxmacxp.pro/lib/libjvmfwk.dylib.3 Checking DLL ../unxmacxp.pro/lib/libjvmfwk.dylib.3 ...dyld: NSAddImage() error dyld: Library not loaded: /sw/lib/libiconv.2.dylib Referenced from: /sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libxml2.2.dylib Reason: Incompatible library version: libxml2.2.dylib requires version 6.0.0 or later, but libiconv.2.dylib provides version 5.0.0 ../unxmacxp.pro/lib/libjvmfwk.dylib.3 /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh: line 67: 23085 Trace/BPT trap $checkdll $* dmake: Error code 1, while making '../unxmacxp.pro/lib/libjvmfwk.dylib.3' dmake: '../unxmacxp.pro/lib/libjvmfwk.dylib.3' removed. '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /sw/src/fink.build/openoffice.org-1.9m121-59/jvmfwk/source dmake: Error code 1, while making 'build_all' '---* tg_merge.mk *---' ### execution of /var/tmp/tmp.1.tWHj2W failed, exit code 255 libiconv has been changing fast: I already have three versions in my debs and I only installed this fink a week ago. So I definitely compiled the installed version against xorg, which was my first guess about the problem. Does anyone have another suggestion? My system: Package manager version: 0.24.10 Distribution version: 0.8.0.rsync TiBook G4 with MacOSX 10.4.2 xcode 2.2 preview HFS+ case sensitive xorg-6.8.2-35 and all else in fink up to date unstable except g77 and mozilla (binary installs). TIA -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On Thu, 8 Sep 2005, Alexander K. Hansen wrote: On 9/8/05, Viv Kendon [EMAIL PROTECTED] wrote: openoffice compiled nicely for several hours until -- snip Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib create-bundle: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib successfully created /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh -L../unxmacxp.pro/lib -L/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib -L/usr/X11R6/lib ../unxmacxp.pro/lib/libjvmfwk.dylib.3 Checking DLL ../unxmacxp.pro/lib/libjvmfwk.dylib.3 ...dyld: NSAddImage() error dyld: Library not loaded: /sw/lib/libiconv.2.dylib Referenced from: /sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libxml2.2.dylib Reason: Incompatible library version: libxml2.2.dylib requires version 6.0.0 or later, but libiconv.2.dylib provides version 5.0.0 ../unxmacxp.pro/lib/libjvmfwk.dylib.3 /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh: line 67: 23085 Trace/BPT trap $checkdll $* dmake: Error code 1, while making '../unxmacxp.pro/lib/libjvmfwk.dylib.3' dmake: '../unxmacxp.pro/lib/libjvmfwk.dylib.3' removed. '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /sw/src/fink.build/openoffice.org-1.9m121-59/jvmfwk/source dmake: Error code 1, while making 'build_all' '---* tg_merge.mk *---' ### execution of /var/tmp/tmp.1.tWHj2W failed, exit code 255 libiconv has been changing fast: I already have three versions in my debs and I only installed this fink a week ago. So I definitely compiled the installed version against xorg, which was my first guess about the problem. Does anyone have another suggestion? My system: Package manager version: 0.24.10 Distribution version: 0.8.0.rsync TiBook G4 with MacOSX 10.4.2 xcode 2.2 preview HFS+ case sensitive xorg-6.8.2-35 and all else in fink up to date unstable except g77 and mozilla (binary installs). TIA -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv In this case I shouldn't think the X11 flavor would matter--libiconv has no dependency on x11. What's your current version of libiconv? And if you run otool -L /sw/lib/libiconv.2.dylib what do you get? For purposes of comparison, I have libiconv-1.10-5, which gives me: $ otool -L /sw/lib/libiconv.2.dylib /sw/lib/libiconv.2.dylib: /sw/lib/libiconv.2.dylib (compatibility version 6.0.0, current version 6.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current version 92.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.0.0) fink list libiconv Information about 4853 packages read in 9 seconds. i libiconv 1.10-6 Character set conversion library i libiconv-bin 1.10-6 Executables for libiconv package i libiconv-dev 1.10-6 Developer files for libiconv package otool -L /sw/lib/libiconv.2.dylib /sw/lib/libiconv.2.dylib: /sw/lib/libiconv.2.dylib (compatibility version 6.0.0, current version 6.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current version 92.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.0.0) that looks pretty similar except for being one version newer than yours...and just to be sure: ls -l /sw/lib/libiconv.2.dylib 0 lrwxr-xr-x1 root admin 20 Sep 7 08:10 /sw/lib/libiconv.2.dylib - libiconv.2.3.0.dylib ls -l /sw/lib/libiconv.2.3.0.dylib 1220 -rw-r--r--1 root admin 1248052 Sep 7 08:09 /sw/lib/libiconv.2.3.0.dylib which is about 12 hours older than the ooo build I was running. I have the build dir intact, and the last 10,000 or so lines of the build log saved, so there is plenty to dig through if you can suggest what to look for. thanks... -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On 9/8/05, Viv Kendon [EMAIL PROTECTED] wrote: On Thu, 8 Sep 2005, Alexander K. Hansen wrote: On 9/8/05, Viv Kendon [EMAIL PROTECTED] wrote: openoffice compiled nicely for several hours until -- snip Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib create-bundle: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib successfully created /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh -L../unxmacxp.pro/lib -L/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib -L/usr/X11R6/lib ../unxmacxp.pro/lib/libjvmfwk.dylib.3 Checking DLL ../unxmacxp.pro/lib/libjvmfwk.dylib.3 ...dyld: NSAddImage() error dyld: Library not loaded: /sw/lib/libiconv.2.dylib Referenced from: /sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libxml2.2.dylib Reason: Incompatible library version: libxml2.2.dylib requires version 6.0.0 or later, but libiconv.2.dylib provides version 5.0.0 ../unxmacxp.pro/lib/libjvmfwk.dylib.3 /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh: line 67: 23085 Trace/BPT trap $checkdll $* dmake: Error code 1, while making '../unxmacxp.pro/lib/libjvmfwk.dylib.3' dmake: '../unxmacxp.pro/lib/libjvmfwk.dylib.3' removed. '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /sw/src/fink.build/openoffice.org-1.9m121-59/jvmfwk/source dmake: Error code 1, while making 'build_all' '---* tg_merge.mk *---' ### execution of /var/tmp/tmp.1.tWHj2W failed, exit code 255 libiconv has been changing fast: I already have three versions in my debs and I only installed this fink a week ago. So I definitely compiled the installed version against xorg, which was my first guess about the problem. Does anyone have another suggestion? My system: Package manager version: 0.24.10 Distribution version: 0.8.0.rsync TiBook G4 with MacOSX 10.4.2 xcode 2.2 preview HFS+ case sensitive xorg-6.8.2-35 and all else in fink up to date unstable except g77 and mozilla (binary installs). TIA -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv In this case I shouldn't think the X11 flavor would matter--libiconv has no dependency on x11. What's your current version of libiconv? And if you run otool -L /sw/lib/libiconv.2.dylib what do you get? For purposes of comparison, I have libiconv-1.10-5, which gives me: $ otool -L /sw/lib/libiconv.2.dylib /sw/lib/libiconv.2.dylib: /sw/lib/libiconv.2.dylib (compatibility version 6.0.0, current version 6.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current version 92.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.0.0) fink list libiconv Information about 4853 packages read in 9 seconds. i libiconv 1.10-6 Character set conversion library i libiconv-bin 1.10-6 Executables for libiconv package i libiconv-dev 1.10-6 Developer files for libiconv package otool -L /sw/lib/libiconv.2.dylib /sw/lib/libiconv.2.dylib: /sw/lib/libiconv.2.dylib (compatibility version 6.0.0, current version 6.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current version 92.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.0.0) that looks pretty similar except for being one version newer than yours...and just to be sure: ls -l /sw/lib/libiconv.2.dylib 0 lrwxr-xr-x1 root admin 20 Sep 7 08:10 /sw/lib/libiconv.2.dylib - libiconv.2.3.0.dylib ls -l /sw/lib/libiconv.2.3.0.dylib 1220 -rw-r--r--1 root admin 1248052 Sep 7 08:09 /sw/lib/libiconv.2.3.0.dylib which is about 12 hours older than the ooo build I was running. I have the build dir intact, and the last 10,000 or so lines of the build log saved, so there is plenty to dig through if you can suggest what to look for. thanks... -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv That's weirrd--you've got compatibility version 6.0.0 as was required. -- Alexander K. Hansen Fink Documenter [Day Job] Levitated Dipole Experiment http://psfcwww2.psfc.mit.edu/ldx/ --- SF.Net email is Sponsored by the Better Software Conference EXPO
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On 9/8/05, Viv Kendon [EMAIL PROTECTED] wrote: openoffice compiled nicely for several hours until -- snip Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib create-bundle: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib successfully created /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh -L../unxmacxp.pro/lib -L/sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib -L/usr/X11R6/lib ../unxmacxp.pro/lib/libjvmfwk.dylib.3 Checking DLL ../unxmacxp.pro/lib/libjvmfwk.dylib.3 ...dyld: NSAddImage() error dyld: Library not loaded: /sw/lib/libiconv.2.dylib Referenced from: /sw/src/fink.build/openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib/libxml2.2.dylib Reason: Incompatible library version: libxml2.2.dylib requires version 6.0.0 or later, but libiconv.2.dylib provides version 5.0.0 ../unxmacxp.pro/lib/libjvmfwk.dylib.3 /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh: line 67: 23085 Trace/BPT trap $checkdll $* dmake: Error code 1, while making '../unxmacxp.pro/lib/libjvmfwk.dylib.3' dmake: '../unxmacxp.pro/lib/libjvmfwk.dylib.3' removed. '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /sw/src/fink.build/openoffice.org-1.9m121-59/jvmfwk/source dmake: Error code 1, while making 'build_all' '---* tg_merge.mk *---' ### execution of /var/tmp/tmp.1.tWHj2W failed, exit code 255 libiconv has been changing fast: I already have three versions in my debs and I only installed this fink a week ago. So I definitely compiled the installed version against xorg, which was my first guess about the problem. Does anyone have another suggestion? My system: Package manager version: 0.24.10 Distribution version: 0.8.0.rsync TiBook G4 with MacOSX 10.4.2 xcode 2.2 preview HFS+ case sensitive xorg-6.8.2-35 and all else in fink up to date unstable except g77 and mozilla (binary installs). TIA -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv In this case I shouldn't think the X11 flavor would matter--libiconv has no dependency on x11. What's your current version of libiconv? And if you run otool -L /sw/lib/libiconv.2.dylib what do you get? For purposes of comparison, I have libiconv-1.10-5, which gives me: $ otool -L /sw/lib/libiconv.2.dylib /sw/lib/libiconv.2.dylib: /sw/lib/libiconv.2.dylib (compatibility version 6.0.0, current version 6.0.0) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/lib/libmx.A.dylib (compatibility version 1.0.0, current version 92.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.0.0) -- Alexander K. Hansen Fink Documenter [Day Job] Levitated Dipole Experiment http://psfcwww2.psfc.mit.edu/ldx/ --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On Sep 8, 2005, at 6:37 AM, Viv Kendon wrote: On Thu, 8 Sep 2005, Alexander K. Hansen wrote: On 9/8/05, Viv Kendon [EMAIL PROTECTED] wrote: openoffice compiled nicely for several hours until -- snip Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib create-bundle: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib successfully created /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/ checkdll.sh -L../unxmacxp.pro/lib -L/sw/src/fink.build/ openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib - L/usr/X11R6/lib ../unxmacxp.pro/lib/libjvmfwk.dylib.3 Checking DLL ../unxmacxp.pro/lib/libjvmfwk.dylib.3 ...dyld: NSAddImage() error dyld: Library not loaded: /sw/lib/libiconv.2.dylib Referenced from: /sw/src/fink.build/openoffice.org-1.9m121-59/ solver/680/unxmacxp.pro/lib/libxml2.2.dylib Reason: Incompatible library version: libxml2.2.dylib requires version 6.0.0 or later, but libiconv.2.dylib provides version 5.0.0 ../unxmacxp.pro/lib/libjvmfwk.dylib.3 /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/ checkdll.sh: line 67: 23085 Trace/BPT trap $checkdll $* dmake: Error code 1, while making '../unxmacxp.pro/lib/ libjvmfwk.dylib.3' dmake: '../unxmacxp.pro/lib/libjvmfwk.dylib.3' removed. '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /sw/src/fink.build/ openoffice.org-1.9m121-59/jvmfwk/source dmake: Error code 1, while making 'build_all' '---* tg_merge.mk *---' ### execution of /var/tmp/tmp.1.tWHj2W failed, exit code 255 The only thing I can imagine which might cause this is if the openoffice.org build system is setting DYLD_LIBRARY_PATH during building, so the /sw/lib/libiconv.2.dylib is not actually resolving to the right thing. I'm cc-ing the maintainer so that this can be investigated further. -- Dave --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
Re: [Fink-users] openoffice.org-1.9m121-59 and libiconv-1.10-6 problem
On Thu, 8 Sep 2005, David R. Morrison wrote: On Sep 8, 2005, at 6:37 AM, Viv Kendon wrote: On Thu, 8 Sep 2005, Alexander K. Hansen wrote: On 9/8/05, Viv Kendon [EMAIL PROTECTED] wrote: openoffice compiled nicely for several hours until -- snip Making: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib create-bundle: ../unxmacxp.pro/lib/libjvmfwk.dylib.3.jnilib successfully created /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh -L../unxmacxp.pro/lib -L/sw/src/fink.build/ openoffice.org-1.9m121-59/solver/680/unxmacxp.pro/lib -L/usr/lib - L/usr/X11R6/lib ../unxmacxp.pro/lib/libjvmfwk.dylib.3 Checking DLL ../unxmacxp.pro/lib/libjvmfwk.dylib.3 ...dyld: NSAddImage() error dyld: Library not loaded: /sw/lib/libiconv.2.dylib Referenced from: /sw/src/fink.build/openoffice.org-1.9m121-59/ solver/680/unxmacxp.pro/lib/libxml2.2.dylib Reason: Incompatible library version: libxml2.2.dylib requires version 6.0.0 or later, but libiconv.2.dylib provides version 5.0.0 ../unxmacxp.pro/lib/libjvmfwk.dylib.3 /sw/src/fink.build/openoffice.org-1.9m121-59/solenv/bin/checkdll.sh: line 67: 23085 Trace/BPT trap $checkdll $* dmake: Error code 1, while making '../unxmacxp.pro/lib/ libjvmfwk.dylib.3' dmake: '../unxmacxp.pro/lib/libjvmfwk.dylib.3' removed. '---* tg_merge.mk *---' ERROR: Error 65280 occurred while making /sw/src/fink.build/ openoffice.org-1.9m121-59/jvmfwk/source dmake: Error code 1, while making 'build_all' '---* tg_merge.mk *---' ### execution of /var/tmp/tmp.1.tWHj2W failed, exit code 255 The only thing I can imagine which might cause this is if the openoffice.org build system is setting DYLD_LIBRARY_PATH during building, so the /sw/lib/libiconv.2.dylib is not actually resolving to the right thing. I'm cc-ing the maintainer so that this can be investigated further. openoffice.org-1.9m121-60 has appeared: I have set it compiling and will see what I have by the morning... -- Viv Dr Viv Kendon [EMAIL PROTECTED] Quantum Information tel: 0113 343 3858 Physics Astronomy University of Leeds http://quantum.leeds.ac.uk/~viv --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Fink-users mailing list Fink-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/fink-users
