Re: [Flexradio] S Meter minimum
Left vs right hand hydrospanner . If I recall the class I took at Chanute Field in the winter of 1963-64 correctly the determining factor is which hemisphere you are in, north or south as it is related to coriolis effect. Patrick NJ5G -Original Message- From: Paul Playford Sent: Monday, January 06, 2014 7:00 PM To: apbid...@mailaps.org ; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum Left hand or right hand? Paul -Original Message- From: Alan Sent: Monday, January 06, 2014 5:36 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum A hydrospanner also works well. 73s, Alan WA4SCA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Wouldn't it be better to use a Software Defined Wrench? That way there's no problems with no compatibility at least until the next software revision... Bill AD5OL On Tuesday, January 7, 2014 11:16 AM, Patrick Greenlee patric...@windstream.net wrote: Left vs right hand hydrospanner . If I recall the class I took at Chanute Field in the winter of 1963-64 correctly the determining factor is which hemisphere you are in, north or south as it is related to coriolis effect. Patrick NJ5G -Original Message- From: Paul Playford Sent: Monday, January 06, 2014 7:00 PM To: apbid...@mailaps.org ; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum Left hand or right hand? Paul -Original Message- From: Alan Sent: Monday, January 06, 2014 5:36 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum A hydrospanner also works well. 73s, Alan WA4SCA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] S Meter minimum
Hi Matthew and Steve, KJ4TN’s message about the S3 noise level minimum on the Flex 3K describes my experience as well. While it varies from band to band a bit, my S Meter never approaches zero, including when the antennas are disconnected or when I am connected directly to the dummy load. Noise level runs around 100. Preamps have a small effect. Sent back to the factory last year for new preamps plus complete checkout and was given assurances every thing was A-OK at that time. Everything else runs perfect! Using PowerSDR v2.7.2. Maybe a calibration or adjustment issue?? Not overly concerned but curious just the same. Thanks! Bill, KI4B ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
There is a small plastic screw near the bottom of the meter, make sure that it is adjusted to zero with the power off. 73 Ross K9COX -Original Message- From: Bill Feldkamp Sent: Monday, January 06, 2014 10:06 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] S Meter minimum Hi Matthew and Steve, KJ4TN’s message about the S3 noise level minimum on the Flex 3K describes my experience as well. While it varies from band to band a bit, my S Meter never approaches zero, including when the antennas are disconnected or when I am connected directly to the dummy load. Noise level runs around 100. Preamps have a small effect. Sent back to the factory last year for new preamps plus complete checkout and was given assurances every thing was A-OK at that time. Everything else runs perfect! Using PowerSDR v2.7.2. Maybe a calibration or adjustment issue?? Not overly concerned but curious just the same. Thanks! Bill, KI4B ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Ross K9COX, I assume you are joking, on a flex there are no hard meters it is all software and no screw to adjust. Dale KB5VE -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ross Stenberg Sent: Monday, January 06, 2014 12:10 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum There is a small plastic screw near the bottom of the meter, make sure that it is adjusted to zero with the power off. 73 Ross K9COX -Original Message- From: Bill Feldkamp Sent: Monday, January 06, 2014 10:06 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] S Meter minimum Hi Matthew and Steve, KJ4TN’s message about the S3 noise level minimum on the Flex 3K describes my experience as well. While it varies from band to band a bit, my S Meter never approaches zero, including when the antennas are disconnected or when I am connected directly to the dummy load. Noise level runs around 100. Preamps have a small effect. Sent back to the factory last year for new preamps plus complete checkout and was given assurances every thing was A-OK at that time. Everything else runs perfect! Using PowerSDR v2.7.2. Maybe a calibration or adjustment issue?? Not overly concerned but curious just the same. Thanks! Bill, KI4B ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Make sure none of the tubes inside glow bluish, except for the voltage regulators. 73 - Mike WA8BXN ---Original Message--- From: Dale Hankins Date: 1/6/2014 1:21:53 PM To: 'Ross Stenberg'; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum Ross K9COX, I assume you are joking, on a flex there are no hard meters it is all software and no screw to adjust. Dale KB5VE ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
I don't see small stuff like I did when I was younger. Is the screw head straight slot, Phillips, torx, star, or what? Patrick NJ5G -Original Message- From: Ross Stenberg Sent: Monday, January 06, 2014 12:09 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum There is a small plastic screw near the bottom of the meter, make sure that it is adjusted to zero with the power off. 73 Ross K9COX -Original Message- From: Bill Feldkamp Sent: Monday, January 06, 2014 10:06 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] S Meter minimum Hi Matthew and Steve, KJ4TN???s message about the S3 noise level minimum on the Flex 3K describes my experience as well. While it varies from band to band a bit, my S Meter never approaches zero, including when the antennas are disconnected or when I am connected directly to the dummy load. Noise level runs around 100. Preamps have a small effect. Sent back to the factory last year for new preamps plus complete checkout and was given assurances every thing was A-OK at that time. Everything else runs perfect! Using PowerSDR v2.7.2. Maybe a calibration or adjustment issue?? Not overly concerned but curious just the same. Thanks! Bill, KI4B ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Is it a phillips head are straight screw? Thanks for your good humor. Matthew-KJ4TN ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
No, it's a pot that you need to adjust. BobAC8O Do THIS before eating carbs #40;every time#41; 1 EASY tip to increase fat-burning, lower blood sugar decrease fat storage http://thirdpartyoffers.juno.com/TGL3131/52cb0b56d2711b564d80st02vuc ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Is that a standard or metric Phillips head? On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com wrote: Is it a phillips head are straight screw? Thanks for your good humor. Matthew-KJ4TN ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Ross, The present temperature is 8 below zero and at 7 this morning it was minus 17 and in a few moments I will have to take care of outdoor chores so when I saw your comment on adjusting the PowerSDR S meter screw I did choke a little and then did feel warmer! 73 Lee K9WRU - Original Message - From: Ross Stenberg ross.stenb...@charter.net To: FlexRadio@flex-radio.biz Sent: Monday, January 06, 2014 12:09 PM Subject: Re: [Flexradio] S Meter minimum There is a small plastic screw near the bottom of the meter, make sure that it is adjusted to zero with the power off. 73 Ross K9COX ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
According to old man Rhee, You know him right? The old guy with just one tooth. Anyway old one tooth rhee says it is a Whitworth style head. Patrick NJ5G -Original Message- From: Jerry Falletta Sent: Monday, January 06, 2014 2:07 PM Cc: FlexRadio Reflector Subject: Re: [Flexradio] S Meter minimum Is that a standard or metric Phillips head? On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com wrote: Is it a phillips head are straight screw? Thanks for your good humor. Matthew-KJ4TN ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ No infections found in this incoming message Scanned by iolo System Shield http://www.iolo.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Ross I tried to follow your directions, but my S meter disappears when I turn the power off. :-) Terry On 06/01/2014 13:09, Ross Stenberg wrote: There is a small plastic screw near the bottom of the meter, make sure that it is adjusted to zero with the power off. 73 Ross K9COX -Original Message- From: Bill Feldkamp Sent: Monday, January 06, 2014 10:06 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] S Meter minimum Hi Matthew and Steve, KJ4TN’s message about the S3 noise level minimum on the Flex 3K describes my experience as well. While it varies from band to band a bit, my S Meter never approaches zero, including when the antennas are disconnected or when I am connected directly to the dummy load. Noise level runs around 100. Preamps have a small effect. Sent back to the factory last year for new preamps plus complete checkout and was given assurances every thing was A-OK at that time. Everything else runs perfect! Using PowerSDR v2.7.2. Maybe a calibration or adjustment issue?? Not overly concerned but curious just the same. Thanks! Bill, KI4B ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- *VE3XTM* EN93un May the propagation be with you. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
But surely on anything as hi-tech as a FlexRadio the S-meter screw would have at least a security Torx adjuster. 73 Alan NV8A On 01/06/14 03:24 pm, Patrick Greenlee wrote: According to old man Rhee, You know him right? The old guy with just one tooth. Anyway old one tooth rhee says it is a Whitworth style head. Patrick NJ5G -Original Message- From: Jerry Falletta Sent: Monday, January 06, 2014 2:07 PM Cc: FlexRadio Reflector Subject: Re: [Flexradio] S Meter minimum Is that a standard or metric Phillips head? On Jan 6, 2014 2:42 PM, hmattc...@juno.com hmattc...@juno.com wrote: Is it a phillips head are straight screw? Thanks for your good humor. Matthew-KJ4TN ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
In repairing screw driver scratches on a monitor, it is best to use a belt sander or palm sander? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
An electric drill works best :) de Paul, W8AEF -Original Message- From: Randy Hall Sent: Monday, January 06, 2014 3:02 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum In repairing screw driver scratches on a monitor, it is best to use a belt sander or palm sander? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
I have been able to zero my meter by using a metric adjustable wrench. Gedas, W8BYA Gallery at http://w8bya.com Light travels faster than sound This is why some people appear bright until you hear them speak. - Original Message - From: Paul Playford w8...@q.com To: Randy Hall randyh...@charter.net; FlexRadio@flex-radio.biz Sent: Monday, January 06, 2014 7:14 PM Subject: Re: [Flexradio] S Meter minimum An electric drill works best :) de Paul, W8AEF -Original Message- From: Randy Hall Sent: Monday, January 06, 2014 3:02 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum In repairing screw driver scratches on a monitor, it is best to use a belt sander or palm sander? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
A hydrospanner also works well. 73s, Alan WA4SCA -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Gedas Sent: Monday, January 06, 2014 6:20 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum I have been able to zero my meter by using a metric adjustable wrench. Gedas, W8BYA Gallery at http://w8bya.com Light travels faster than sound This is why some people appear bright until you hear them speak. - Original Message - From: Paul Playford w8...@q.com To: Randy Hall randyh...@charter.net; FlexRadio@flex-radio.biz Sent: Monday, January 06, 2014 7:14 PM Subject: Re: [Flexradio] S Meter minimum An electric drill works best :) de Paul, W8AEF -Original Message- From: Randy Hall Sent: Monday, January 06, 2014 3:02 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum In repairing screw driver scratches on a monitor, it is best to use a belt sander or palm sander? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Left hand or right hand? Paul -Original Message- From: Alan Sent: Monday, January 06, 2014 5:36 PM To: FlexRadio@flex-radio.biz Subject: Re: [Flexradio] S Meter minimum A hydrospanner also works well. 73s, Alan WA4SCA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] S Meter minimum
Andit never will. The s-meter shows the integrated power at the antenna port within the RX filter. Make the RX filter smaller and the s-meter reading will decrease. Tim Ellison, W4TME Customer Experience Manager FlexRadio Systems™ 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo On 1/6/2014 11:06 AM, Bill Feldkamp wrote: While it varies from band to band a bit, my S Meter never approaches zero, including when the antennas are disconnected or when I am connected directly to the dummy load. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
