Re: [Flexradio] [FlexEdge] V/U module at Dayton?
Tim responded No this is not a feature of the vu5k and the board is feature complete. -Tim Sent from my iPhone On May 16, 2010, at 4:18 PM, Peter Schellernh...@msn.commailto:nh...@msn.com wrote: Tim et al, Is the Flex 5K with V/U modules installed capable of supplying 12VDC to antenna mounted pre amps? If not, is this a future objective? 73, Peter, NH6VB It may not be included, but it would be trivial to add with a coax Bias Tee -- basically nothing more than a series capacitor and an RF Choke. Such a widget would need only a couple of dollars worth of parts inside a box with 2 coax connectors and a place to solder the desired DC wire. The hardest part of this DIY solution is to find a suitable box the appropriate coax connectors. Perhaps someone will make a cheap aftermarket a suitable bias tee :-X . 73, Tom, K3IO [A big :-D since I won the Flex 1500 at Dayton] ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] [FlexEdge] V/U module at Dayton?
Look here for idea's on a power inserter, http://www.hamuniverse.com/wx9dxmfj4712.html Even simpler and less expensive you can find a old UHF TV mast mount amplifier which come with a power inserter with 75 ohm connector, just dissemble it and install a BNC in place of the F connector and RG58 pig tale with connector in place of the 75 Ohm RG59. 73's Bret WX7Y -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tom Clark, K3IO Sent: Monday, May 17, 2010 8:05 PM To: Peter Scheller; flexra...@flex-radio. Biz Subject: Re: [Flexradio] [FlexEdge] V/U module at Dayton? Tim responded No this is not a feature of the vu5k and the board is feature complete. -Tim Sent from my iPhone On May 16, 2010, at 4:18 PM, Peter Schellernh...@msn.commailto:nh...@msn.com wrote: Tim et al, Is the Flex 5K with V/U modules installed capable of supplying 12VDC to antenna mounted pre amps? If not, is this a future objective? 73, Peter, NH6VB It may not be included, but it would be trivial to add with a coax Bias Tee -- basically nothing more than a series capacitor and an RF Choke. Such a widget would need only a couple of dollars worth of parts inside a box with 2 coax connectors and a place to solder the desired DC wire. The hardest part of this DIY solution is to find a suitable box the appropriate coax connectors. Perhaps someone will make a cheap aftermarket a suitable bias tee :-X . 73, Tom, K3IO [A big :-D since I won the Flex 1500 at Dayton] ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] [FlexEdge] V/U module at Dayton?
It was on display but not turned on. -Tim Sent from my iPhone On May 16, 2010, at 3:04 PM, Alan NV8A n...@charter.net wrote: A little bird told me that V/U modules for the 5K would be displayed at Dayton. Did it happen? Was there a 5K with the V/U module installed and operational? -- including a V/U-enabled version of PowerSDR? If so, what were people's impressions? 73 Alan NV8A ___ Flexedge mailing list flexe...@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] [FlexEdge] V/U module at Dayton?
The presentation on it by Ken at the banquet was very interesting, it looks like a killer design. Mostly a class A design with incredible linearity. Had to order one myself! Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sun, May 16, 2010 at 3:41 PM, Tim Ellison telli...@itsco.com wrote: It was on display but not turned on. -Tim Sent from my iPhone On May 16, 2010, at 3:04 PM, Alan NV8A n...@charter.net wrote: A little bird told me that V/U modules for the 5K would be displayed at Dayton. Did it happen? Was there a 5K with the V/U module installed and operational? -- including a V/U-enabled version of PowerSDR? If so, what were people's impressions? 73 Alan NV8A ___ Flexedge mailing list flexe...@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] [FlexEdge] V/U module at Dayton?
Tim et al, Is the Flex 5K with V/U modules installed capable of supplying 12VDC to antenna mounted pre amps? If not, is this a future objective? 73, Peter, NH6VB From: telli...@itsco.com To: n...@charter.net Date: Sun, 16 May 2010 15:41:54 -0400 CC: flexe...@flex-radio.biz; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] [FlexEdge] V/U module at Dayton? It was on display but not turned on. -Tim Sent from my iPhone On May 16, 2010, at 3:04 PM, Alan NV8A n...@charter.net wrote: A little bird told me that V/U modules for the 5K would be displayed at Dayton. Did it happen? Was there a 5K with the V/U module installed and operational? -- including a V/U-enabled version of PowerSDR? If so, what were people's impressions? 73 Alan NV8A ___ Flexedge mailing list flexe...@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ _ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
Re: [Flexradio] [FlexEdge] V/U module at Dayton?
No this is not a feature of the vu5k and the board is feature complete. -Tim Sent from my iPhone On May 16, 2010, at 4:18 PM, Peter Scheller nh...@msn.commailto:nh...@msn.com wrote: Tim et al, Is the Flex 5K with V/U modules installed capable of supplying 12VDC to antenna mounted pre amps? If not, is this a future objective? 73, Peter, NH6VB From: mailto:telli...@itsco.com telli...@itsco.commailto:telli...@itsco.com To: mailto:n...@charter.net n...@charter.netmailto:n...@charter.net Date: Sun, 16 May 2010 15:41:54 -0400 CC: flexe...@flex-radio.bizmailto:flexe...@flex-radio.biz; mailto:FlexRadio@flex-radio.biz FlexRadio@flex-radio.bizmailto:FlexRadio@flex-radio.biz Subject: Re: [Flexradio] [FlexEdge] V/U module at Dayton? It was on display but not turned on. -Tim Sent from my iPhone On May 16, 2010, at 3:04 PM, Alan NV8A n...@charter.netmailto:n...@charter.net wrote: A little bird told me that V/U modules for the 5K would be displayed at Dayton. Did it happen? Was there a 5K with the V/U module installed and operational? -- including a V/U-enabled version of PowerSDR? If so, what were people's impressions? 73 Alan NV8A ___ Flexedge mailing list mailto:flexe...@flex-radio.biz flexe...@flex-radio.bizmailto:flexe...@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. ___ FlexRadio Systems Mailing List mailto:FlexRadio@flex-radio.biz FlexRadio@flex-radio.bizmailto:FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ http://www.flex-radio.com/ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. See how.http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
