Re: [ADMIN] Posting etiquette (was RE: Contact Information)
OK , You are absolutely right for the security purpose and to avoid misuse of information. Now I will unubscribe from this hotmail address and I am going to subscribe on my mail at company's ID. From: [EMAIL PROTECTED] Reply-To: Foxboro DCS Mail List [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [ADMIN] Posting etiquette (was RE: Contact Information) Date: Tue, 18 Sep 2001 11:45:34 -0400 Hi list, I appreciate Ted Jirik's concern about possible misuse of highly technical information that is freely exchanged on this list. After all, we operate on the basis that each one of us is who we say we are (or imply that we are). Identifying the subscribers is made much easier on this list since most (90%) of you subscribed to the list using your company-supplied e-mail address. Barring the possibility of somebody posting to the list with a forged From: address, it's fairly easy to decipher for whom the subscriber works. The problem arises when some subscribers, for any number of reasons, use the freely available webmail addresses (yahoo.com, hotmail.com, bigfoot.com, etc.) that effectively mask the real identity of the subscribers. Included in this category are those using regular ISPs (eg. aol.com) or home addresses. My personal e-mail, for example, is [EMAIL PROTECTED] which is my own virtual domain. This is easily deduced using whois data, but others are not so easily pinpointed. To allay this security concern, I strongly recommend that every poster include some identification data at the end of your posting so others have some knowledge of you and your company, especially if your e-mail address is not a company-provided one. This is, after all, basic etiquette for participating in a mailing list. As a list, we can tacitly enforce this by not responding to postings that lack this identifying information. Administratively, I'll try to do some off-line vetting with new subscribers also. Please let me know if you have any concern about this or any other issue. Regards, Duc M. Do list-mom -- The Cassandra Project http://www.thecassandraproject.org/ -Original Message- From: Ted Jirik [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 18, 2001 10:51 AM To: [EMAIL PROTECTED] Subject: Contact Information Hello All, In light of the recent events which underline the need for security I thought it might be a good idea to see how users of this list might feel about posting a description of themselves with contact information. This might allow us to refrain from supplying critical system information to those who would not identify themselves. I'll begin, My name is Ted Jirik, I worked for Foxboro for 15 years. I currently have my own business providing programming services to Foxboro customers in the northwest United States. My company is Real Time Solutions, Inc. and I may be contacted at (360) 253-1323. Ted Jirik Real Time Solutions, Inc. [EMAIL PROTECTED] (360) 253-1323 _ This message has been checked for all known viruses by the MessageLabs Virus Scanning Service. For further information visit http://www.messagelabs.com/stats.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Information
Hi Friends, I want to know the following .Just for information .Will you pl. help? (a).How to know among many AWs on the same LAN Which AW-Node is a HOST ? Is it possible to have on the same node there can be more than one HOST? i.e. One AW is a HOST for three AWs and another 2nd AW is HOST for another five AW ?And all are on the same LAN?How to define , where to define and where to define which is HOST? (b)..Command to know the MAC address of AW (c)..Command to know the MHz of AW (d)..Command to know the Memory of AW (e)..Command to know the Last Dump Date of AW (f)..Command to know the Current value of all the Analoge Tags on Perticular station (g)..Command to know the IP Address of AW (h)..Command , so that while rlogin it does not require password. (i)..Path ,Location for the password of Foxanalyst (j).Command to have default Display Manager /Foxview (k)..Path Location of all the Quick Fixes loaded. Thanks in Advance, _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Screen Saver
Hi! Is it possible to have screen saver on our AW...i.e. in UNIX environment? and in only DOS Based PC? Sauwly Hawl _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
RE: AW BOXES
Thanx a Lot. Our AW51B has crashed and we have to replace by new one. And We are not having AW51B But in our other plant AW51C is spare . 1.If some how we get same AW51B then also what is the procedure to replace sun box? As MAC Address will be changed of AW Box ,is it required to reboot the each CP? Can we just replace it or something is to be done? 2And we have to replace AW51B by AW51C which we can get immediatelly ,then also what is to be done? Is sysdef is to be changed? And same questions as above also? Thanx a lot in advance Shawly Hawl From: [EMAIL PROTECTED] Reply-To: Foxboro DCS Mail List [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: RE: AW BOXES Date: Fri, 31 Aug 2001 09:27:16 -0400 In addition to the information offered by Alex, check out the Cassandra FAQ page: http://www.thecassandraproject.org/hardware_faq.html#B2 Duc -- The Cassandra Project http://www.thecassandraproject.org/ -Original Message- From: Johnson, Alex (Foxboro) [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 30, 2001 10:15 PM To: Foxboro DCS Mail List Subject: RE: AW BOXES AW51B - SPARCstation 5 - Clock rates range are 85 MHz, 110 MHz, 175 MHz AW51C - SPARCstation 20 with dual 65 MHz microprocessors AW51E - UltraSPARC 30 with a 248 MHz processor Hope this helps. Regards, Alex Johnson 10707 Haddington Houston, TX 77043 713.722.2859 (office) 713.722.2700 (switchboard) 713.932.0222 (fax) [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -Original Message- From: dhawly hawpyt [SMTP:[EMAIL PROTECTED]] Sent: Thursday, August 30, 2001 5:53 PM To: [EMAIL PROTECTED] Subject:AW BOXES Hi Friends, can you help to know ..The differences between AW51B ,AW51C AW51E? Thanx in Advance Sawly hawl _ This message has been checked for all known viruses by the MessageLabs Virus Scanning Service. For further information visit http://www.messagelabs.com/stats.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
Re: Return Alarm
Actually we have used single bit for Pump Status.If status changed to 1 means pumps has started and if it has changed to 0 pump has stopped. We have used SAO = 1 means state change option true IVO = 0 Invert option false INVALM = 1 Invert Alarm Option false means it will give alarm only for state change from 1 to 0 means when pump is stoppped and it will give return alarm for 0 to 1 and RTN is not coming on CAD and also not giving horn. If INVALM =0 then it will give alarm for state change from 0 to 1 means when pumps is started and it will give return alarm for 1 to 0 and RTN is not coming on CAD and also not giving horn. I require for both state change from 0 to 1 from 1 to 0. Regards, Shawly Hawl From: Neil Martin [EMAIL PROTECTED] Reply-To: Foxboro DCS Mail List [EMAIL PROTECTED] To: Foxboro DCS Mail List [EMAIL PROTECTED] Subject: Re: Return Alarm Date: Fri, 31 Aug 2001 09:13:30 -0500 Have you tried SAO = TRUE and SCOPT = 1 (for all transitions)? dhawly hawpyt [EMAIL PROTECTED]To: [EMAIL PROTECTED] Sent by: cc: [EMAIL PROTECTED]Subject: Return Alarm oject.org 08/30/01 08:02 PM Please respond to Foxboro DCS Mail List Hi friends, ...Is it possible to have horn on announciator keyboard even if alarm returns back.It is coming while alarm comes but we require even when alarm returns back?If yes,then how? On curren alarm Display ,RTNReturn Alarm is ot appearing while it is comng on AHD ,Alarm History Display. Is it possible to get RTN even on CAD and how? Thanx in advance, Sawly hawl _ --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
AW BOXES
Hi Friends, can you help to know ..The differences between AW51B ,AW51C AW51E? Thanx in Advance Sawly hawl _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp --- This list is neither sponsored nor endorsed by the Foxboro Company. All postings from this list are the work of list subscribers and no warranty is made or implied as to the accuracy of any information disseminated through this medium. By subscribing to this list you agree to hold the list sponsor(s) blameless for any and all mishaps which might occur due to your application of information received from this mailing list. To be removed from this list, send mail to [EMAIL PROTECTED] with unsubscribe foxboro in the Subject. Or, send any mail to [EMAIL PROTECTED]
