https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=276198
Bug ID: 276198
Summary: bsdconfig - can't setup network interface using
"default" option
Product: Base System
Version: 13.2-RELEASE
Hardware: Any
OS: Any
Status: New
Severity: Affects Only Me
Priority: ---
Component: bin
Assignee: b...@freebsd.org
Reporter: peter.chen.d...@gmail.com
Environment:
FreeBSD version: 13.2-RELEASE
hardware: Raspberry Pi 400
ethernet cable: cat 5e
Bug Description:
In bsdconfig(8), the "default" option in networking management can't setup
the network interface correctly if the previous state of the network link is
"no carrier" caused by unsupported option. Even using "#service netif restart"
won't help.
Steps to Reproduce Bug:
1. In bsdconfig(8) > Networking Management > Network Interfaces >
> options
2. Select "media 1000baseT mediaopt full-duplex,master instance 1" and bring
up interface during confirmation. This option is not supported by Raspberry Pi
400, so when you exit the bsdconfig(8) and type ifconfig(8), the status of
shows "no carrier".
3. Repeat step 1 but choose "default" option and bring up interface during
confirmation.
4. ifconfig(8) shows the status of to be "no carrier". The
setting in "/etc/rc.conf" file for is correct. Run "#service netif
restart" won't work.
5. Repeat step 1 but choose "media 100baseTX" option and bring up interface
during confirmation.
6. Exit the bsdconfig(8) and use ifconfig(8) to show network interface info,
the status of becomes "active". However, when you try to ping other
IP addresses (such as 192.168.0.1), it shows "no route to host". This bug is
described in bug#276197.
7. Use service(8) with command "#service netif restart" to restart netif, the
ifconfig(8) shows the link as "active", now you are able to ping other ip
addresses and connect to other hosts.
8. Now, open bsdconfig(8) again and choose "default" option. After that,
ifconfig(8) shows the status is "active" and you can successfully ping /
connect to other hosts.
Expected Result:
Changing option "media 1000baseT mediaopt full-duplex,master instance 1" ->
"default" should work, at least the network interface should work after running
"#service netif restart". However, it is only working by changing it following
"media 1000baseT mediaopt full-duplex,master instance 1" -> "media 100baseTX"
-> "default".
The issue of not setting up "media 100baseTX" after exiting bsdconfig(8) is
described by bug#276197.
--
You are receiving this mail because:
You are the assignee for the bug.
