RE: RELENG_5 problems with Intel 855 (RELENG_4 boots fine) (solved!)
At 01:29 PM 01/04/2005, Gray Lilley wrote: Can you try setting hw.pci.enable_io_modes=0 at the loader prompt then booting? Thanks! That did the trick!! OK set hw.pci.enable_io_modes=0 OK boot /boot/kernel/acpi.ko text=0x41520 data=0x1da4+0x112c syms=[0x4+0x7630+0x4+0x9c97] KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/nfs ACPI APIC Table: AOpen AWRDACPI Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class CPU) Origin = GenuineIntel Id = 0x695 Stepping = 5 Features=0xa7e9fbbfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE real memory = 534642688 (509 MB) avail memory = 513507328 (489 MB) ioapic0 Version 2.0 irqs 0-23 on motherboard npx0: math processor on motherboard npx0: INT 16 interface acpi0: AOpen AWRDACPI on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x4008-0x400b on acpi0 cpu0: ACPI CPU (3 Cx states) on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_button0: Power Button on acpi0 acpi_button1: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: base peripheral at device 0.1 (no driver attached) pci0: base peripheral at device 0.3 (no driver attached) pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 agp0: Intel 82855GME (855GME GMCH) SVGA controller port 0xe300-0xe307 mem 0xed00-0xed07,0xe000-0xe7ff irq 16 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pci0: display at device 2.1 (no driver attached) pcib2: ACPI PCI-PCI bridge at device 30.0 on pci0 pci2: ACPI PCI bus on pcib2 puc0: Lava Computers Quattro-PCI serial port port 0xd300-0xd307,0xd200-0xd207 irq 16 at device 4.0 on pci2 sio4: Lava Computers Quattro-PCI serial port on puc0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode sio5: Lava Computers Quattro-PCI serial port on puc0 sio5: type 16550A sio5: unable to activate interrupt in fast mode - using normal mode puc1: Lava Computers Quattro-PCI serial port port 0xd500-0xd507,0xd400-0xd407 irq 16 at device 4.1 on pci2 sio6: Lava Computers Quattro-PCI serial port on puc1 sio6: type 16550A sio6: unable to activate interrupt in fast mode - using normal mode sio7: Lava Computers Quattro-PCI serial port on puc1 sio7: type 16550A sio7: unable to activate interrupt in fast mode - using normal mode pci2: simple comms, UART at device 5.0 (no driver attached) twe0: 3ware Storage Controller. Driver version 1.50.01.002 port 0xd700-0xd70f mem 0xec00-0xec7f irq 18 at device 6.0 on pci2 twe0: 2 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048 isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH4 UDMA100 controller port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: serial bus, SMBus at device 31.3 (no driver attached) acpi_tz0: Thermal Zone on acpi0 fdc0: floppy drive controller port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: 16550A-compatible COM port port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 pmtimer0 on isa0 orm0: ISA Option ROM at iomem 0xd-0xd0fff on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 ppc0: parallel port not found. Timecounter TSC frequency 1500059900 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 3100 packets/entry by default ad0: 38166MB ST340014A/3.06 [77545/16/63] at ata0-master UDMA100 acd0: CDROM CD-ROM 48X/AKU/T31 at ata1-master PIO4 twed0: Unit 0, TwinStor, Normal on twe0 twed0: 76318MB (156299440 sectors) Mounting root from ufs:/dev/ad0s1a Pre-seeding PRNG: kickstart. Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart. kernel dumps on /dev/ad0s1b swapon: adding /dev/ad0s1b as swap device Starting file system checks: /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 331086 free (990 frags, 41262 blocks, 0.2% fragmentation) /dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1e: clean, 500291 free (203 frags, 62511 blocks, 0.0%
RE: RELENG_5 problems with Intel 855 (RELENG_4 boots fine)(solved!)
No Problems. Unfortunately, this will disable (at least one) other items of hardware. Sound Cards seem to be the devices which get killed when using this, but if your not needing sound, it doesn't seem to be much of a problem. I'm yet to find anyone who can actually explain what the problem is that causes this? Is there anyone out there who could suggest why this happens at all, and is there a fix, other than this? Thanks Gray -Original Message- From: Mike Tancsa [mailto:[EMAIL PROTECTED] Sent: 01 April 2005 20:00 To: Gray Lilley; freebsd-stable@freebsd.org Subject: RE: RELENG_5 problems with Intel 855 (RELENG_4 boots fine) (solved!) At 01:29 PM 01/04/2005, Gray Lilley wrote: Can you try setting hw.pci.enable_io_modes=0 at the loader prompt then booting? Thanks! That did the trick!! OK set hw.pci.enable_io_modes=0 OK boot /boot/kernel/acpi.ko text=0x41520 data=0x1da4+0x112c syms=[0x4+0x7630+0x4+0x9c97] KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/nfs ACPI APIC Table: AOpen AWRDACPI Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class CPU) Origin = GenuineIntel Id = 0x695 Stepping = 5 Features=0xa7e9fbbfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE real memory = 534642688 (509 MB) avail memory = 513507328 (489 MB) ioapic0 Version 2.0 irqs 0-23 on motherboard npx0: math processor on motherboard npx0: INT 16 interface acpi0: AOpen AWRDACPI on motherboard acpi0: Power Button (fixed) Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0x4008-0x400b on acpi0 cpu0: ACPI CPU (3 Cx states) on acpi0 acpi_throttle0: ACPI CPU Throttling on cpu0 acpi_button0: Power Button on acpi0 acpi_button1: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 pci0: ACPI PCI bus on pcib0 pci0: base peripheral at device 0.1 (no driver attached) pci0: base peripheral at device 0.3 (no driver attached) pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 agp0: Intel 82855GME (855GME GMCH) SVGA controller port 0xe300-0xe307 mem 0xed00-0xed07,0xe000-0xe7ff irq 16 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pci0: display at device 2.1 (no driver attached) pcib2: ACPI PCI-PCI bridge at device 30.0 on pci0 pci2: ACPI PCI bus on pcib2 puc0: Lava Computers Quattro-PCI serial port port 0xd300-0xd307,0xd200-0xd207 irq 16 at device 4.0 on pci2 sio4: Lava Computers Quattro-PCI serial port on puc0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode sio5: Lava Computers Quattro-PCI serial port on puc0 sio5: type 16550A sio5: unable to activate interrupt in fast mode - using normal mode puc1: Lava Computers Quattro-PCI serial port port 0xd500-0xd507,0xd400-0xd407 irq 16 at device 4.1 on pci2 sio6: Lava Computers Quattro-PCI serial port on puc1 sio6: type 16550A sio6: unable to activate interrupt in fast mode - using normal mode sio7: Lava Computers Quattro-PCI serial port on puc1 sio7: type 16550A sio7: unable to activate interrupt in fast mode - using normal mode pci2: simple comms, UART at device 5.0 (no driver attached) twe0: 3ware Storage Controller. Driver version 1.50.01.002 port 0xd700-0xd70f mem 0xec00-0xec7f irq 18 at device 6.0 on pci2 twe0: 2 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048 isab0: PCI-ISA bridge at device 31.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel ICH4 UDMA100 controller port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: serial bus, SMBus at device 31.3 (no driver attached) acpi_tz0: Thermal Zone on acpi0 fdc0: floppy drive controller port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: 16550A-compatible COM port port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: 16550A-compatible COM port port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 pmtimer0 on isa0 orm0: ISA Option ROM at iomem 0xd-0xd0fff on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 ppc0: parallel port not found. Timecounter TSC frequency 1500059900 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 3100 packets/entry by default ad0: 38166MB ST340014A
