[gentoo-user] gentoo wirelesss access point
Can someone point me to a document so I can set up a gentoo laptop with a built in ipw2200 wireless as an access point using wpa ??? I need to use it for a demo of some wireless 802.11 phones. Looking at the conf.d/net file doesnt show what I need to fill out to get a working access point. Or is this best done manually (iwconfig and wpa_supplicant) BillK -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
On 10/24/06, Les Henderson [EMAIL PROTECTED] wrote: !!! Couldn't download 'Blue-1.6.tar.bz2'. Aborting. I've removed this file from /usr/portage/distfiles/ and downloaded new copies from a couple different mirrors all with this same result. Any suggestions? Hmm, strange. What does the following output: # grep Blue-1.6.tar.bz2 /usr/portage/media-video/mplayer/Manifest # wget http://distfiles.gentoo.org/distfiles/Blue-1.6.tar.bz2 # ls -l Blue-1.6.tar.bz # sha256sum Blue-1.6.tar.bz2 In particular, see if the string printed by sha256sum matches the string after SHA256 in the Manifest, and that the sizes match. If so, try moving the archive you just downloaded manually to distfiles. BTW, I get 225883 bytes for this file, with the SHA256 sum of 394333a50184fc9ea78eba726204a5dbb653a07e30c94d335c52e2a4e1be0568, which matches the Manifest, although I haven't sync'd in a couple of days. -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Why has xmms been killed suddenly?
On Wed, 25 Oct 2006 13:43:03 +1000, Ric de France wrote: emerge --unmerge xmms (and xmms-plugins and accesoires) Can I slide in a emerge --depclean in here? No. emerge --newuse --deep world No, put it here. depclean's output recommends running it after emerge -uavDN world -- Neil Bothwick ATTENTION: Despite any other listing of product content found in this manual, you are advised that, in actuality, your computer consists of 99.9% empty space. signature.asc Description: PGP signature
Re: [gentoo-user] xmms alternative
On Tuesday 24 October 2006 22:29, Hemmann, Volker Armin wrote: On Tuesday 24 October 2006 22:59, Willie Wong wrote: I have one question about xmms alternatives: xmms has this remote control feature that I use a lot (I have keys on my multimedia keyboard bound to remote controls and also certain voice commands bound to playing and stopping of music), can someone point me to an alternative of xmms that also supports remote controls? Thanks in advance, amarok I was able to control amarok with my mobile phone and bluetooth... Cool! Have you a HOWTO? -- Regards, Mick pgp089yXl3A0D.pgp Description: PGP signature
Re: [gentoo-user] ATI drivers
On Wednesday 25 October 2006 01:55, Daniel D Jones wrote: Option MerdgedFB true Not sure, but could this have something to do with it? -- Regards, Mick pgpHpP5NGmjvm.pgp Description: PGP signature
Re: [gentoo-user] net.eth0 starting yet not starting
* Lord Sauron [EMAIL PROTECTED] [2006-10-24 11:18]: During boot it goes through the normal routine, it starts net.lo and everything, however, then it goes into runlevel 3 and then all my services fail (apache, sshd, ddclient, etc), complaining that net.eth0 isn't running. I log in and try to start net.eth0 and it tells me that it's already running! have you tried ifconfig? that command shows whether your eth0 is up, have IP assigned and other things, post result here if unsure what does dmesg say about your network card? Robert -- Robert Svoboda -- gentoo-user@gentoo.org mailing list
[gentoo-user] NVIDIA question
I upgraded nvidia-drivers from 1.0.8774 to 1.0.8776. Couldn't restart the X server. dmesg said the client and the kernel had unmatched versions (kernel with 1.0.8774). I did modprobe nvidia. I ended up rebooting, and it works now. So, what went wrong? (I mean, a reboot shouldn't be necessary...) What must be done to make the kernel use the new module? -- Jorge Almeida -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] NVIDIA question
You forgot to rmmod nvidia modprobe nvidia Previous nvidia kernel driver was in the memory, that is why dmesg reported the different versions. István Jorge Almeida írta: I upgraded nvidia-drivers from 1.0.8774 to 1.0.8776. Couldn't restart the X server. dmesg said the client and the kernel had unmatched versions (kernel with 1.0.8774). I did modprobe nvidia. I ended up rebooting, and it works now. So, what went wrong? (I mean, a reboot shouldn't be necessary...) What must be done to make the kernel use the new module? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] NVIDIA question
Jorge Almeida wrote: I upgraded nvidia-drivers from 1.0.8774 to 1.0.8776. Couldn't restart the X server. dmesg said the client and the kernel had unmatched versions (kernel with 1.0.8774). I did modprobe nvidia. I ended up rebooting, and it works now. So, what went wrong? (I mean, a reboot shouldn't be necessary...) What must be done to make the kernel use the new module? You may have needed to remove the old module first. I usually do this: rmmod nvidia # that removes the old one. modules-update # updates the modules, may not be needed though. modprobe nvidia # loads the new one back up Then restart X. That has always worked for me without needing to reboot. Your mileage may vary. Dale :-) :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Digest verification failed: qt-x11-opensource-src-4.1.4.tar.gz
On 10/25/06, Meino Christian Cramer [EMAIL PROTECTED] wrote: Hi, I got this: Downloading 'ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo/distfiles/qt-x11-opensource-src-4.1.4.tar.gz' --06:23:28-- ftp://sunsite.informatik.rwth-aachen.de/pub/Linux/gentoo/distfiles/qt-x11-opensource-src-4.1.4.tar.gz = `/usr/portage/distfiles/qt-x11-opensource-src-4.1.4.tar.gz' Resolving sunsite.informatik.rwth-aachen.de... 137.226.34.227 Connecting to sunsite.informatik.rwth-aachen.de|137.226.34.227|:21... connected. Logging in as anonymous ... Logged in! == SYST ... done.== PWD ... done. == TYPE I ... done. == CWD /pub/Linux/gentoo/distfiles ... done. == PASV ... done.== RETR qt-x11-opensource-src-4.1.4.tar.gz ... done. Length: 32,174,985 (31M) (unauthoritative) 100%[] 32,174,985 122.99K/sETA 00:00 06:27:46 (122.36 KB/s) - `/usr/portage/distfiles/qt-x11-opensource-src-4.1.4.tar.gz' saved [32174985] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums ;-) ...[ ok ] * checking qt-x11-opensource-src-4.1.4.tar.gz ;-) ...[ !! ] !!! Digest verification failed: !!! /usr/portage/distfiles/qt-x11-opensource-src-4.1.4.tar.gz !!! Reason: Filesize does not match recorded size !!! Got: 32174985 !!! Expected: 409784 Hello, From Trolltech: STORED: ftp://ftp.trolltech.com/qt/source/qt-x11-opensource-src-4.1.4.tar.gz 88f8c9c4622108baca2950baac3c02d6 qt-x11-opensource-src-4.1.4.tar.gz Size: 32174985 bytes So I'd say there is a problem in the ebuild. Maybe you should copy the ebuild in an overlay directory and regenerate it with ebuild qt-x11-opensource-src-4.1.4.ebuild digest -- Régis http://regis.decamps.info/blog/ -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Digest verification failed: qt-x11-opensource-src-4.1.4.tar.gz
On Wed, 25 Oct 2006 12:08:42 +0200, Régis Décamps wrote: So I'd say there is a problem in the ebuild. Maybe you should copy the ebuild in an overlay directory and regenerate it with ebuild qt-x11-opensource-src-4.1.4.ebuild digest You don;t need to copy an ebuild to an overlay to re-digest it, you can do it with the version i the portage tree. You can even do it when emerging, with emerge --digest, but be aware this will redigest all packages emerged, including dependencies. However you do it, think very carefully first. Package digests are a security measure, to ensure none of the files you are installing have been tampered with. By regdigesting a package, you're discarding this check. Before considering this, remove the file(s) from $DISTDIR, sync again and try to emerge the package normally. -- Neil Bothwick WinErr 01F: Reserved for future mistakes of our developers. signature.asc Description: PGP signature
[gentoo-user] [OT] Amorok and getting started.
Hi, As we all know XMMS was recently removed. I have a little CD collection that I want to put on my hard drive and I want to use Amarok to do this. I have postgresql installed and am trying to get it setup using the Gentoo wiki. This is what I have installed: [EMAIL PROTECTED] / # equery list postgresql [ Searching for package 'postgresql' in all categories among: ] * installed packages [I--] [ ] dev-db/postgresql-8.0.8 (0) [EMAIL PROTECTED] / # equery list amarok [ Searching for package 'amarok' in all categories among: ] * installed packages [I--] [ ] media-sound/amarok-1.4.3-r1 (0) [EMAIL PROTECTED] / # I have never done any of this before. Somehow, likely by mistake, I got one CD copied over and can play off the hard drive. I have no idea how I did this really. I need someone on or off list to teach me how to get the music off the CD, get it into Amarok so I get get this going. This looks really cool. If whoever can help me uses MySql instead, I would be willing to install it, especially if it is better. I only want to do CDs. I have a lousy dial-up connection here. Thanks much for any help you can provide. Dale :-) :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Digest verification failed: qt-x11-opensource-src-4.1.4.tar.gz
http://bugs.gentoo.org/show_bug.cgi?id=149809 Have a look at this, should help On 25/10/06, Neil Bothwick [EMAIL PROTECTED] wrote: On Wed, 25 Oct 2006 12:08:42 +0200, Régis Décamps wrote: So I'd say there is a problem in the ebuild. Maybe you should copy the ebuild in an overlay directory and regenerate it with ebuild qt-x11-opensource-src-4.1.4.ebuild digest You don;t need to copy an ebuild to an overlay to re-digest it, you can do it with the version i the portage tree. You can even do it when emerging, with emerge --digest, but be aware this will redigest all packages emerged, including dependencies. However you do it, think very carefully first. Package digests are a security measure, to ensure none of the files you are installing have been tampered with. By regdigesting a package, you're discarding this check. Before considering this, remove the file(s) from $DISTDIR, sync again and try to emerge the package normally. -- Neil Bothwick WinErr 01F: Reserved for future mistakes of our developers. -- There are 10 types of people in this world: those who understand binary, those who don't --Unknown -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge Tomcat Problem
On Tuesday 24 October 2006 17:19, Rafael Barrera Oro wrote: -L/usr/lib/nspr -L/usr/lib/nss [SNIP] ld: cannot find -lnss3 What is the output of: # ls -ld /usr/lib # ls -l /usr/lib/nss Also do: # java-check-environment report any errors? -- Bo Andresen pgpIeTA65tO9k.pgp Description: PGP signature
[gentoo-user] php-gtk-1.0.2 merge fails
Hi all, i'm trying to merge dev-php4/php-gtk-1.0.2 but it fails with these errors: first: when trying to build it from a Virtual terminal i got this error : /usr/lib/php4/bin/php -q /var/tmp/portage/dev-php4/php-gtk-1.0.2/work/php_gtk-1.0.2/generator/generator.php -o ext/gtk%2b/gdk.overrides -p Gdk ext/gtk%2b/gdk.defs ext/gtk+/gen_gdk.c make: *** [ext/gtk+/gen_gdk.c] Error 1 !!! ERROR: dev-php4/php-gtk-1.0.2 failed. Call stack: ebuild.sh, line 1568: Called dyn_compile ebuild.sh, line 937: Called src_compile php-gtk-1.0.2.ebuild, line 54: Called php-ext-source-r1_src_compile php-ext-source-r1.eclass, line 57: Called die when trying to build it from pesdo terminal like aterm xterm ...etc - inside working Xorg - i got this error: ext/gtk+/gen_gtk.c:1: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'not' make: *** [ext/gtk+/gen_gtk.lo] Error 1 !!! ERROR: dev-php4/php-gtk-1.0.2 failed. Call stack: ebuild.sh, line 1568: Called dyn_compile ebuild.sh, line 937: Called src_compile php-gtk-1.0.2.ebuild, line 54: Called php-ext-source-r1_src_compile php-ext-source-r1.eclass, line 57: Called die Important note: these errors appears after emerge --sync and i have already dev-php4/php-gtk-1.0.2 merged succesfully befor that emerge --sync emerge -e world so there's 2 changes in the system: 1- Portage tree updated 2- System full update and some world PKGs updated and sure php-4/5 update. that's exactly what have been changed in the system and there's no make.conf nor /etc/portage changes . any one have a soulution ? thanks all. -- Mohamed M. Hagag محمد محمود حجاج http://mohamedhagag.wordpress.com -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] IO Failure -- Failed 'touch .unpacked' in /var/tmp/portage/
On Wednesday 25 October 2006 02:51, Rafael Alfaro wrote: [SNIP] !!! IO Failure -- Failed 'touch .unpacked' in /var/tmp/portage/mesa- progs-6.5.1 [SNIP] Is /proc mounted correctly? http://bugs.gentoo.org/show_bug.cgi?id=126036 -- Bo Andresen pgpTndzw4xevh.pgp Description: PGP signature
Re: [gentoo-user] ATI drivers
On Wednesday 25 October 2006 02:58, Mick wrote: r On Wednesday 25 October 2006 01:55, Daniel D Jones wrote: Option MerdgedFB true Not sure, but could this have something to do with it? I believe it may have. From what I've read, merged frame buffers are to allow the use of 3D acceleration across multiple monitors by making it appear as one large monitor, which is what appears to be happening. When I right click the desktop and go to properties, it shows only a single monitor. Before, it showed two. As I said before, I don't really need 3D acceleration on this box. Additionally, I don't believe acceleration works on a display larger than 2048 in either dimension and my virtual desktop is 3360 x 1050. However, without the MergedFB setup, I get mirrored displays rather than a stretched display. The Dual Monitor Howto, which I linked to in my first post, says to use the MergedFB option, and it also says to turn on xinerama. If my understanding of MergedFB is correct and it's working as designed and presents a virtual single display, then xinerama isn't going to work because it can't distinguish between the two displays. So I don't know if my understanding of how this is supposed to work is incorrect, if the HowTo is simply FUBARed or what. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Digest verification failed: qt-x11-opensource-src-4.1.4.tar.gz
From: Stuart Howard [EMAIL PROTECTED] Subject: Re: [gentoo-user] Digest verification failed: qt-x11-opensource-src-4.1.4.tar.gz Date: Wed, 25 Oct 2006 11:55:50 +0100 Thanks a lot! qt is currently compiling! :) Keep hacking! mcc http://bugs.gentoo.org/show_bug.cgi?id=149809 Have a look at this, should help On 25/10/06, Neil Bothwick [EMAIL PROTECTED] wrote: On Wed, 25 Oct 2006 12:08:42 +0200, Régis Décamps wrote: So I'd say there is a problem in the ebuild. Maybe you should copy the ebuild in an overlay directory and regenerate it with ebuild qt-x11-opensource-src-4.1.4.ebuild digest You don;t need to copy an ebuild to an overlay to re-digest it, you can do it with the version i the portage tree. You can even do it when emerging, with emerge --digest, but be aware this will redigest all packages emerged, including dependencies. However you do it, think very carefully first. Package digests are a security measure, to ensure none of the files you are installing have been tampered with. By regdigesting a package, you're discarding this check. Before considering this, remove the file(s) from $DISTDIR, sync again and try to emerge the package normally. -- Neil Bothwick WinErr 01F: Reserved for future mistakes of our developers. -- There are 10 types of people in this world: those who understand binary, those who don't --Unknown -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] xmms alternative
On Wednesday 25 October 2006 13:49, Mick wrote: On Tuesday 24 October 2006 22:29, Hemmann, Volker Armin wrote: On Tuesday 24 October 2006 22:59, Willie Wong wrote: I have one question about xmms alternatives: xmms has this remote control feature that I use a lot (I have keys on my multimedia keyboard bound to remote controls and also certain voice commands bound to playing and stopping of music), can someone point me to an alternative of xmms that also supports remote controls? Thanks in advance, amarok I was able to control amarok with my mobile phone and bluetooth... Cool! Have you a HOWTO? There are AFAIK two apps, Bluemote and BlueAmarok out there, I have used both. But I think they have a fairly strong dependency on Sony Ericsson menu extensions. HTH -Robin. -- -- Robin Atwood, Bangkok, Thailand. tel/fax: +66 2252 1438 mobile: +66 8513 22487 -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On Wednesday 25 October 2006 17:49, Dale wrote: I have never done any of this before. Somehow, likely by mistake, I got one CD copied over and can play off the hard drive. I have no idea how I did this really. I need someone on or off list to teach me how to get the music off the CD, get it into Amarok so I get get this going. This looks really cool. If whoever can help me uses MySql instead, I would be willing to install it, especially if it is better. I only want to do CDs. I have a lousy dial-up connection here. By default amarok uses a built-in copy of SQlite, so you don't really need MySQL unless you use it for something else. Postgres is not supported. Rip your CDs with k3b. HTH -Robin. -- -- Robin Atwood, Bangkok, Thailand. tel/fax: +66 2252 1438 mobile: +66 8513 22487 -- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On Wednesday 25 October 2006 22:08, Robin Atwood wrote: On Wednesday 25 October 2006 17:49, Dale wrote: I have never done any of this before. Somehow, likely by mistake, I got one CD copied over and can play off the hard drive. I have no idea how I did this really. I need someone on or off list to teach me how to get the music off the CD, get it into Amarok so I get get this going. This looks really cool. If whoever can help me uses MySql instead, I would be willing to install it, especially if it is better. I only want to do CDs. I have a lousy dial-up connection here. By default amarok uses a built-in copy of SQlite, so you don't really need MySQL unless you use it for something else. Postgres is not supported. Rip your CDs with k3b. An easy way to rip cds is to go to 'audiocd://' in konqueror, then it will show some folders containing mp3s, oggs and flac files which you can then copy and paste to whereever you want and the cd ripping and encoding will be handled transparently for you. -- Raymond Lewis Rebbeck -- gentoo-user@gentoo.org mailing list
[gentoo-user] OOO and parallel compiling
Hi folks, I am compiling OOO 2.0.4 currently and am somehow surprised. Checking the ebuild shows that it still sets JOBS=1 but it *does* use distcc in my setup. At least parts of OOO are compiled on another box. It never did that before. Did I misread the ebuild? Anyway, a positive surprise. ;-) Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
Robin Atwood wrote: By default amarok uses a built-in copy of SQlite, so you don't really need MySQL unless you use it for something else. Postgres is not supported. Rip your CDs with k3b. HTH -Robin. Thanks for the info. I noticed the first time I started amarok that postgres was not even running but it didn't seem to notice it. I don't remember emergeing it either but I may have. I did figure out what I did earlier. Tell me if you think I am doing wrong here. When I insert a CD, the window pops up on what to do. I select 'extract and encode'. Then it saves it to ~/wav when I tell it to 'rip' them. I then move it to my music directory ~/music. After that, Amarok picks it right up and they play fine. The only thing that I do not like is this. I have to use the PCM slider to control my music volume which also controls the volume of the sound of notifications in KDE too. So when I turn up the music volume it seems to turn up everything else too. Any way around this? Thanks for the help. Sometimes I just need a little help getting started. I'm disabled so time is something I have to much of sometimes. I like to tinker with my rig. Now to move my OS to another drive without messing up anything. ;-) Wish me luck. Thanks Dale :-) :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
Les Henderson wrote: So, I need to recompile mplayer after getting rid of xmms. Unfortuneately I'm having problems and things keep on haning on the same file. here is what happens: # emerge -av mplayer These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] media-video/mplayer-1.0_pre8 USE=X alsa arts dvd encode gif gtk ipv6 jpeg mad matrox nvidia opengl oss png real sdl svga truetype vorbis win32codecs xv -3dfx -3dnow -3dnowext -aac -aalib (-altivec) -bidi -bindist -bl -cdparanoia -cpudetection -custom-cflags -debug -dga -directfb -doc -dts -dv -dvb -dvdread -esd -fbcon -ggi -i8x0 -jack -joystick -libcaca -lirc -live -livecd -lzo -mmx -mmxext -musepack -nas -openal -rtc -samba -speex -sse -sse2 -tga -theora -unicode -v4l -v4l2 -x264 -xanim -xinerama (-xmms*) -xvid -xvmc LINGUAS=-bg -cs -da -de -el -en -es -fr -hu -ja -ko -mk -nl -no -pl -pt_BR -ro -ru -sk -tr -uk -zh_CN -zh_TW 514 kB Total size of downloads: 514 kB Would you like to merge these packages? [Yes/No] y Emerging (1 of 1) media-video/mplayer-1.0_pre8 to / * font-arial-iso-8859-1.tar.bz2 MD5 ;-) ... [ ok ] * font-arial-iso-8859-1.tar.bz2 RMD160 ;-) ... [ ok ] * font-arial-iso-8859-1.tar.bz2 SHA1 ;-) ... [ ok ] * font-arial-iso-8859-1.tar.bz2 SHA256 ;-) ... [ ok ] * font-arial-iso-8859-1.tar.bz2 size ;-) ... [ ok ] * MPlayer-1.0pre8.tar.bz2 MD5 ;-) ...[ ok ] * MPlayer-1.0pre8.tar.bz2 RMD160 ;-) ... [ ok ] * MPlayer-1.0pre8.tar.bz2 SHA1 ;-) ... [ ok ] * MPlayer-1.0pre8.tar.bz2 SHA256 ;-) ... [ ok ] * MPlayer-1.0pre8.tar.bz2 size ;-) ... [ ok ] * svgalib_helper- 1.9.17-mplayer.tar.bz2 MD5 ;-) ... [ ok ] * svgalib_helper-1.9.17-mplayer.tar.bz2 RMD160 ;-) ... [ ok ] * svgalib_helper-1.9.17-mplayer.tar.bz2 SHA1 ;-) ... [ ok ] * svgalib_helper- 1.9.17-mplayer.tar.bz2 SHA256 ;-) ... [ ok ] * svgalib_helper-1.9.17-mplayer.tar.bz2 size ;-) ... [ ok ] Resuming download... Downloading ' http://distfiles.gentoo.org/distfiles/Blue-1.6.tar.bz2' --00:09:49-- http://distfiles.gentoo.org/distfiles/Blue-1.6.tar.bz2 = `/usr/portage/distfiles/Blue- 1.6.tar.bz2' Resolving distfiles.gentoo.org... 64.50.238.52 http://64.50.238.52, 64.50.236.52 http://64.50.236.52, 216.165.129.135 http://216.165.129.135, ... Connecting to distfiles.gentoo.org|64.50.238.52|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. Resuming download... Downloading 'http://distro.ibiblio.org/pub/linux/distributions/gentoo/distfiles/Blue-1.6.tar.bz2' --00:09:49-- http://distro.ibiblio.org/pub/linux/distributions/gentoo/distfiles/Blue-1.6.tar.bz2 = `/usr/portage/distfiles/Blue- 1.6.tar.bz2' Resolving distro.ibiblio.org... 152.46.7.109 http://152.46.7.109 Connecting to distro.ibiblio.org|152.46.7.109|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. Resuming download... Downloading 'http://www2.mplayerhq.hu/MPlayer/Skin/Blue-1.6.tar.bz2 http://www2.mplayerhq.hu/MPlayer/Skin/Blue-1.6.tar.bz2' --00:09:49-- http://www2.mplayerhq.hu/MPlayer/Skin/Blue-1.6.tar.bz2 = `/usr/portage/distfiles/Blue-1.6.tar.bz2' Resolving www2.mplayerhq.hu... 193.225.187.202 http://193.225.187.202 Connecting to www2.mplayerhq.hu|193.225.187.202|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. Resuming download... Downloading 'http://www1.mplayerhq.hu/MPlayer/Skin/Blue-1.6.tar.bz2 http://www1.mplayerhq.hu/MPlayer/Skin/Blue-1.6.tar.bz2' --00:09:50-- http://www1.mplayerhq.hu/MPlayer/Skin/Blue-1.6.tar.bz2 = `/usr/portage/distfiles/Blue-1.6.tar.bz2' Resolving www1.mplayerhq.hu... 213.144.138.186 http://213.144.138.186 Connecting to www1.mplayerhq.hu|213.144.138.186|:80... connected. HTTP request sent, awaiting response... 416 Requested Range Not Satisfiable The file is already fully retrieved; nothing to do. !!! Couldn't download 'Blue-1.6.tar.bz2'. Aborting. I've removed this file from /usr/portage/distfiles/ and downloaded new copies from a couple different mirrors all with this same result. Any suggestions? -- Les Henderson [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] try to unmerge the package and later compilit again emerge -C mplayer -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] [OT] Amorok and getting started.
By default amarok uses a built-in copy of SQlite, so you don't really need MySQL unless you use it for something else. Postgres is not supported. Rip your CDs with k3b. HTH -Robin. -- Postgres is supported, see http://amarok.kde.org/wiki/Postgresql_HowTo and the use flag postgres is present. My 2 cts Benjamin -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
On 10/25/06, Richard Fish [EMAIL PROTECTED] wrote: On 10/24/06, Les Henderson [EMAIL PROTECTED] wrote: !!! Couldn't download 'Blue-1.6.tar.bz2'. Aborting. I've removed this file from /usr/portage/distfiles/ and downloaded new copies from a couple different mirrors all with this same result.Any suggestions?Hmm, strange.What does the following output:# grep Blue-1.6.tar.bz2 /usr/portage/media-video/mplayer/Manifest # wget http://distfiles.gentoo.org/distfiles/Blue-1.6.tar.bz2# ls -l Blue-1.6.tar.bz# sha256sum Blue-1.6.tar.bz2 In particular, see if the string printed by sha256sum matches thestring after SHA256 in the Manifest, and that the sizes match.If so,try moving the archive you just downloaded manually to distfiles. well, there is the problem I guess.# grep Blue-1.6.tar.bz2 /usr/portage/media-video/mplayer/ManifestDIST Blue-1.6.tar.bz2 281056 RMD160 c16342d3131f01fbd294ff109b8ab31cef555d13 SHA1 2a082bdef2f5eebc403c234a036949f38683da06 SHA256 3a32b59bfc2c3c46acdead2ca65c592a696daaa42561dfcd45c10b8032de8c6d # ls -l Blue-1.6.tar.bz2-rw-r--r-- 1 root root 225883 Oct 24 19:07 Blue-1.6.tar.bz2# md5sum Blue-1.6.tar.bz21813f8537c8be56c1aa4946a2fd938a9 Blue-1.6.tar.bz2(Sorry, I'm not sure that I've got the package installed with sha256sum and I'm not sure which package that is off the top of my head). BTW, I get 225883 bytes for this file, with the SHA256 sum of394333a50184fc9ea78eba726204a5dbb653a07e30c94d335c52e2a4e1be0568, which matches the Manifest, although I haven't sync'd in a couple ofdays.-Richard--gentoo-user@gentoo.org mailing listSo the Manifest that I've got appears to be different. I've just sync'd and still have the same problem. I'm not really sure where to go from here. Other downloads from other mirrors give me the same result. -- Les Henderson[EMAIL PROTECTED]
Re: [gentoo-user] [OT] Amorok and getting started.
On Wed, 25 Oct 2006 08:00:18 -0500 Dale Dale wrote: I did figure out what I did earlier. Tell me if you think I am doing wrong here. When I insert a CD, the window pops up on what to do. I select 'extract and encode'. Then it saves it to ~/wav when I tell it to 'rip' them. I then move it to my music directory ~/music. After that, Amarok picks it right up and they play fine. Well, I'm not sure if I've understood you, but I simply put audiocd:// in konqueror and the copy ogg/mp3 folder to wherever I want... The only thing that I do not like is this. I have to use the PCM slider to control my music volume which also controls the volume of the sound of notifications in KDE too. So when I turn up the music volume it seems to turn up everything else too. Any way around this? amarok has its own volume control. Winkey and + or Winkey and - Now to move my OS to another drive without messing up anything. ;-) Wish me luck. good luck! Thanks Dale Cheers! -- Arnau Bria http://blog.emergetux.net Wiggum: Dispara a las ruedas Lou. Lou: eee, es un tanque jefe. Wiggum: Me tienes hartito con todas tus excusas. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
Conneries wearegeeks wrote: By default amarok uses a built-in copy of SQlite, so you don't really need MySQL unless you use it for something else. Postgres is not supported. Rip your CDs with k3b. HTH -Robin. -- Postgres is supported, see http://amarok.kde.org/wiki/Postgresql_HowTo and the use flag postgres is present. My 2 cts Benjamin You may be correct. It says support is compiled in. [EMAIL PROTECTED] / # emerge -pv amarok These are the packages that would be merged, in order: Calculating dependencies... done! [ebuild R ] media-sound/amarok-1.4.3-r1 USE=arts kde opengl postgres -aac -debug -ifp -ipod -mysql -njb -noamazon -real -visualization -xinerama (-xmms) LINGUAS=-az -bg -br -ca -cs -cy -da -de -el -en_GB -es -et -fi -fr -ga -gl -he -hi -hu -is -it -ja -ka -km -ko -lt -ms -nb -nl -nn -pa -pl -pt -pt_BR -ro -ru -rw -sl -sr [EMAIL PROTECTED] -sv -ta -tg -th -tr -uk -uz -zh_CN -zh_TW 0 kB Total size of downloads: 0 kB [EMAIL PROTECTED] / # I don't know how it works but it says it is there. Dale :-) :-) -- gentoo-user@gentoo.org mailing list
[gentoo-user] ipw2200 + Intel Pro Wireless 2915 a/b/g: ipw2200: Firmware error detected. Restarting.
I am having a very irritating problem with the wireless driver and card above. Sometimes, but not all the times, it gets into this phase where the wireless drops, comes back, drops, comes back (etc) and eventually I start seeing this in kernel logs: ipw2200: Firmware error detected. Restarting. Unloading and reloading the module does not stop the issue, when it has begun. I have done some searching, and the typical advice is to make sure hardware crypto is off, by loading it like so: modprobe -v ipw2200 hwcrypto=0 However this never stops it, or even causes it to calm down a bit. The most frustrating thing, is that this does not happen all the time. I use multiple wireless networks. All of them wide open, except for one, which was mine at home with WPA. That AP since bricked (warning: avoid LInksys WRT54G v5's, i'm not the only one this happened to) so I can no loner test. But when I used it, i saw the same things as I am describing here. Software and Hardware information: IBM Thinkpad T43 Intel Pro Wireless 2915 a/b/g Kernel 2.6.18.1-ifc (ifc is a very small intel fan control patch) ipw2200-1.2.0 ipw2200-firmware-3.0 wpa_supplicant-0.5.5 Any ideas out there? I have talked to others who have seen this, and none of them ever solved it... Gentoo Specific Information (some of this may be useful to others too) Portage 2.1.2_pre3-r3 (default-linux/x86/2006.1/desktop, gcc-4.1.1, glibc-2.4-r3, 2.6.18.1-ifc i686) = System uname: 2.6.18.1-ifc i686 Intel(R) Pentium(R) M processor 1.86GHz Gentoo Base System version 1.12.5 Last Sync: Tue, 24 Oct 2006 02:20:01 + distcc 2.18.3 i686-pc-linux-gnu (protocols 1 and 2) (default port 3632) [enabled] ccache version 2.3 [enabled] app-admin/eselect-compiler: [Not Present] dev-java/java-config: 1.3.7, 2.0.30 dev-lang/python: 2.4.3-r4 dev-python/pycrypto: 2.0.1-r5 dev-util/ccache: 2.3 dev-util/confcache: [Not Present] sys-apps/sandbox:1.2.18.1 sys-devel/autoconf: 2.13, 2.60 sys-devel/automake: 1.4_p6, 1.5, 1.6.3, 1.7.9-r1, 1.8.5-r3, 1.9.6-r2 sys-devel/binutils: 2.17 sys-devel/gcc-config: 1.3.13-r4 sys-devel/libtool: 1.5.22 virtual/os-headers: 2.6.17-r1 ACCEPT_KEYWORDS=x86 AUTOCLEAN=yes CBUILD=i686-pc-linux-gnu CFLAGS=-Os -march=pentium-m -fomit-frame-pointer -pipe CHOST=i686-pc-linux-gnu CONFIG_PROTECT=/etc /usr/NX/etc /usr/NX/home /usr/kde/3.5/env /usr/kde/3.5/share/config /usr/kde/3.5/shutdown /usr/share/X11/xkb /usr/share/config /usr/share/texmf/dvipdfm/config/ /usr/share/texmf/dvips/config/ /usr/share/texmf/tex/generic/config/ /usr/share/texmf/tex/platex/config/ /usr/share/texmf/xdvi/ CONFIG_PROTECT_MASK=/etc/env.d /etc/env.d/java/ /etc/gconf /etc/java-config/vms/ /etc/revdep-rebuild /etc/terminfo CXXFLAGS=-Os -march=pentium-m -fomit-frame-pointer -pipe DISTDIR=/usr/portage/distfiles FEATURES=autoconfig ccache distcc distlocks metadata-transfer sandbox sfperms strict GENTOO_MIRRORS=http://gentoo.chem.wisc.edu/gentoo/ ftp://gentoo.chem.wisc.edu/gentoo/ ftp://gentoo.mirrors.tds.net/gentoo http://mirror.datapipe.net/gentoo; LINGUAS=en MAKEOPTS=-j5 PKGDIR=/usr/portage/packages PORTAGE_RSYNC_OPTS=--recursive --links --safe-links --perms --times --compress --force --whole-file --delete --delete-after --stats --timeout=180 --exclude=/distfiles --exclude=/local --exclude=/packages PORTAGE_TMPDIR=/var/tmp PORTDIR=/usr/portage PORTDIR_OVERLAY=/usr/local/portage SYNC=rsync://rsync.namerica.gentoo.org/gentoo-portage USE=x86 3dnow X a52 alsa berkdb bitmap-fonts bzip2 cairo cdr chroot cli cracklib crypt dbus dlloader dri dv dvd dvdr dvdread eds elibc_glibc emboss encode fam ffmpeg firefox flac fortran gdbm gif gpm gstreamer gtk gtk2 hal input_devices_keyboard input_devices_mouse input_devices_synaptics isdnlog jpeg kde kdeenablefinal kernel_linux libg++ linguas_en mad mikmod mmx mp3 mpeg ncurses network nls nptl nptlonly ogg opengl oss pam pcre pdflib perl png ppds pppd pwdb python qt3 qt4 quicktime readline reflection sdl session spell spl sse ssl svg theora tiff truetype truetype-fonts type1-fonts udev unicode usb userland_GNU video_cards_ati video_cards_fglrx video_cards_radeon vorbis win32codecs xml xml2 xorg xv xvid zlib Unset: CTARGET, EMERGE_DEFAULT_OPTS, INSTALL_MASK, LANG, LC_ALL, LDFLAGS, PORTAGE_RSYNC_EXTRA_OPTS -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On 25 October 2006 15:00, Dale wrote: I did figure out what I did earlier. Tell me if you think I am doing wrong here. When I insert a CD, the window pops up on what to do. I select 'extract and encode'. Then it saves it to ~/wav when I tell it to 'rip' them. I then move it to my music directory ~/music. After that, Amarok picks it right up and they play fine. The only thing that I do not like is this. I have to use the PCM slider to control my music volume which also controls the volume of the sound of notifications in KDE too. So when I turn up the music volume it seems to turn up everything else too. Any way around this? Whether amaroK (or any other application) plays a sound file (your music) or the system plays a sound file (system notifications) doesn't matter, it *is* the same source. So the same volume settings apply. No way around that. You can, though, control amaroK's volume to a certain extent in amaroK itself. Try to put amaroK's internal control to 100% and drop PCM a bit lower. It might help though I doubt it will help much. (Don't know for sure because I don't use system notifications.) Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OOO and parallel compiling
Am Mittwoch, 25. Oktober 2006 14:24 schrieb ext Uwe Thiem: I am compiling OOO 2.0.4 currently and am somehow surprised. Checking the ebuild shows that it still sets JOBS=1 but it *does* use distcc in my setup. At least parts of OOO are compiled on another box. It never did that before. Did I misread the ebuild? So how is using distcc and jobs=1 contrary? If you have configured portage to use distcc and have distcc configured to only use the remote machine, no matter how many jobs yoou start, they will end up on the remote (unless distcc itself decides it's not worthwhile). Bye... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net pgpoHbokDsC7v.pgp Description: PGP signature
Re: [gentoo-user] Emerge Tomcat Problem
Bo Ørsted Andresen wrote: On Tuesday 24 October 2006 17:19, Rafael Barrera Oro wrote: -L/usr/lib/nspr -L/usr/lib/nss [SNIP] ld: cannot find -lnss3 What is the output of: # ls -ld /usr/lib # ls -l /usr/lib/nss Also do: # java-check-environment report any errors? # ls -ld /usr/lib gives the following output: drwxr-xr-x 17 root root 4096 Aug 18 22:54 /usr/lib # ls -l /usr/lib/nss gives no output at all as for # java-check-environment the output was: * === Java Environment Checker === * The purpose of this script is to check the sanity of your Java Environment. * We have significantly changed and improved the way Java is handled in many respects. * Please refer to http://www.gentoo.org/proj/en/java/java-upgrade.xml for details * Checking vm_environment_files ... [ ok ] * Checking user_settings ... * Generation-1 configurations found in ~/.gentoo * Please run the following to remove them: $ rm /home/elrafa/.gentoo/java /home/elrafa/.gentoo/java-env /home/elrafa/.gento o/java-env.csh /home/elrafa/.gentoo/java.csh * You may also need update your ~/.bash_profile * or ~/.bashrc if they reference these file * If you choose, you can select a new user VM. * Otherwise, the system-vm will be used. * Run 'java-config -L' to see a list of available VMs * Then run 'java-config -s VM choice' [ !! ] * Some problems were found. Please follow the instructions above, and rerun java-check-environment so i deleted the indicated files and i am trying again, i will keep you posted on how that turns out thanks for the tip Rafael -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Emerge Tomcat Problem
Rafael Barrera Oro wrote: Bo Ørsted Andresen wrote: On Tuesday 24 October 2006 17:19, Rafael Barrera Oro wrote: -L/usr/lib/nspr -L/usr/lib/nss [SNIP] ld: cannot find -lnss3 What is the output of: # ls -ld /usr/lib # ls -l /usr/lib/nss Also do: # java-check-environment report any errors? # ls -ld /usr/lib gives the following output: drwxr-xr-x 17 root root 4096 Aug 18 22:54 /usr/lib # ls -l /usr/lib/nss gives no output at all as for # java-check-environment the output was: * === Java Environment Checker === * The purpose of this script is to check the sanity of your Java Environment. * We have significantly changed and improved the way Java is handled in many respects. * Please refer to http://www.gentoo.org/proj/en/java/java-upgrade.xml for details * Checking vm_environment_files ... [ ok ] * Checking user_settings ... * Generation-1 configurations found in ~/.gentoo * Please run the following to remove them: $ rm /home/elrafa/.gentoo/java /home/elrafa/.gentoo/java-env /home/elrafa/.gento o/java-env.csh /home/elrafa/.gentoo/java.csh * You may also need update your ~/.bash_profile * or ~/.bashrc if they reference these file * If you choose, you can select a new user VM. * Otherwise, the system-vm will be used. * Run 'java-config -L' to see a list of available VMs * Then run 'java-config -s VM choice' [ !! ] * Some problems were found. Please follow the instructions above, and rerun java-check-environment so i deleted the indicated files and i am trying again, i will keep you posted on how that turns out thanks for the tip Rafael I am sorry to report that i tried to emerge again and it still does not work :( Rafael -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OOO and parallel compiling
On 25 October 2006 16:00, Dirk Heinrichs wrote: Am Mittwoch, 25. Oktober 2006 14:24 schrieb ext Uwe Thiem: I am compiling OOO 2.0.4 currently and am somehow surprised. Checking the ebuild shows that it still sets JOBS=1 but it *does* use distcc in my setup. At least parts of OOO are compiled on another box. It never did that before. Did I misread the ebuild? So how is using distcc and jobs=1 contrary? If you have configured portage to use distcc and have distcc configured to only use the remote machine, no matter how many jobs yoou start, they will end up on the remote (unless distcc itself decides it's not worthwhile). I compiles OOO on both boxes in parallel. Actually, it just finished without error while I was typing this. And yes, the compile run was much faster than any other before. Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On Wed, 25 Oct 2006 15:37:30 +0200, Uwe Thiem wrote: You can, though, control amaroK's volume to a certain extent in amaroK itself. Try to put amaroK's internal control to 100% and drop PCM a bit lower. It might help though I doubt it will help much. (Don't know for sure because I don't use system notifications.) You can also control the volume of system notifications, so it's probably best to set PCM fairly high then bring down the volume for notifications and various applications to their best levels. -- Neil Bothwick Multitasking?? But I only have one PC! signature.asc Description: PGP signature
Re: [gentoo-user] 320GB hard drive maxed at ~280GB?
I have a 320GB hard drive with a small swap partition, a small boot partition, and the remainder in the root partition. 'du -sh /' says 278G and a mkisofs command failed with no space left on device. What happened to the rest of the gigs? If you formatted with ext3/ext2, 5% is reserved for root, and will not appear in df output. This would account for about 15G. Another 7.3% (or about 23G) is lost due to the fact that linux and df count 1GB as 1073741824 bytes, while manufactures sell drives counting 1GB as 10 bytes. And just so I can talk to myself in cyberspace just like real life, I'll reply to my own posting... You can use tune2fs -m 0 to change the ext2/ext3 reserved blocks percentage to 0 to 'recover' some of that space. -Richard Thanks a lot, very informative. I ran 'tune2fs -m 1 /dev/sda3' to crank the reserved space down to 1%. Time to start re-authoring my DVD backups. - Grant -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
On Wednesday 25 October 2006 07:18, Les Henderson wrote: So, I need to recompile mplayer after getting rid of xmms. Unfortuneately I'm having problems and things keep on haning on the same file. here is what happens: # emerge -av mplayer These are the packages that would be merged, in order: [SNIP] The file is already fully retrieved; nothing to do. !!! Couldn't download 'Blue-1.6.tar.bz2'. Aborting. I've removed this file from /usr/portage/distfiles/ and downloaded new copies from a couple different mirrors all with this same result. Any suggestions? Apparently upstream changed the tar ball. Sync again in half an hour or so.. https://bugs.gentoo.org/show_bug.cgi?id=152694 -- Bo Andresen pgpYSs6OINGIc.pgp Description: PGP signature
Re: [gentoo-user] [OT] Amorok and getting started.
Neil Bothwick wrote: On Wed, 25 Oct 2006 15:37:30 +0200, Uwe Thiem wrote: You can, though, control amaroK's volume to a certain extent in amaroK itself. Try to put amaroK's internal control to 100% and drop PCM a bit lower. It might help though I doubt it will help much. (Don't know for sure because I don't use system notifications.) You can also control the volume of system notifications, so it's probably best to set PCM fairly high then bring down the volume for notifications and various applications to their best levels. WOW. That must be new. I never saw that before. Wooo Oo. That helped a lot. Now to go get all the sounds turned back on. ;-) Dale :-) :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] net.eth0 starting yet not starting
On 10/25/06, Robert Svoboda [EMAIL PROTECTED] wrote: * Lord Sauron [EMAIL PROTECTED] [2006-10-24 11:18]: During boot it goes through the normal routine, it starts net.lo and everything, however, then it goes into runlevel 3 and then all my services fail (apache, sshd, ddclient, etc), complaining that net.eth0 isn't running. I log in and try to start net.eth0 and it tells me that it's already running! have you tried ifconfig? that command shows whether your eth0 is up, have IP assigned and other things, post result here if unsure what does dmesg say about your network card? Alright, your original recompile of the kernel fix does work. I just automatically installed the wrong driver. I'm used to hacking my Athlon64 to death, so I installed the forcedeth driver. Wrong! I needed some PCI drivers for 3Com/Linksys PCI cards. My mistake. It works just fine now. -- == GCv3.12 == GCS d-(++) s+: a? C++ UL+ P+ L++ E--- W+(+++) N++ o? K? w--- O? M+ V? PS- PE+ Y-(--) PGP- t+++ 5? X R tv-- b+ DI+++ D+ G e* h- !r !y = END GCv3.12 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On 25 October 2006 17:51, Neil Bothwick wrote: On Wed, 25 Oct 2006 15:37:30 +0200, Uwe Thiem wrote: You can, though, control amaroK's volume to a certain extent in amaroK itself. Try to put amaroK's internal control to 100% and drop PCM a bit lower. It might help though I doubt it will help much. (Don't know for sure because I don't use system notifications.) You can also control the volume of system notifications, so it's probably best to set PCM fairly high then bring down the volume for notifications and various applications to their best levels. How? I am sitting here with KDE 3.5.5 and can't find any such control. Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Audiocd:// broken (was: Amarok and getting started)
Raymond Lewis Rebbeck ha scritto: An easy way to rip cds is to go to 'audiocd://' in konqueror, then it will show some folders containing mp3s, oggs and flac files which you can then copy and paste to whereever you want and the cd ripping and encoding will be handled transparently for you. When, months ago, kde 3.5 went stable and I switched, my audiocd:// seems horribly broken. Sad, because I did love that feature a lot. When I put the audiocd in and I click on the icon in media:/ window, KDE just says it can't recognize the cd at all (cannot mount, bad superblock blahblah). The cd's play just fine if I play them with, let's say, XMMS or Xine, so it's not hardware fault. Any hint? I tried emerging and re-emerging kdemultimedia etc. but nothing helped. m. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
On 10/25/06, Les Henderson [EMAIL PROTECTED] wrote: well, there is the problem I guess. Yep. emerge --sync should fix it. So the Manifest that I've got appears to be different. I've just sync'd and still have the same problem. I'm not really sure where to go from here. Other downloads from other mirrors give me the same result. Try again. It was re-digested 3h45m ago [1]. What is odd is that my local tree which is a few days old has the right digests. -Richard [1] http://sources.gentoo.org/viewcvs.py/gentoo-x86/media-video/mplayer/Manifest -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
El Miércoles, 25 de Octubre de 2006 19:43, Uwe Thiem escribió: On 25 October 2006 17:51, Neil Bothwick wrote: On Wed, 25 Oct 2006 15:37:30 +0200, Uwe Thiem wrote: You can, though, control amaroK's volume to a certain extent in amaroK itself. Try to put amaroK's internal control to 100% and drop PCM a bit lower. It might help though I doubt it will help much. (Don't know for sure because I don't use system notifications.) You can also control the volume of system notifications, so it's probably best to set PCM fairly high then bring down the volume for notifications and various applications to their best levels. How? I am sitting here with KDE 3.5.5 and can't find any such control. Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na Go to kcontrol - sounds multimedia - system notifications Then, press the prefferences button at the right bottom corner, there you can set the volume, but only if you are using the kde sound system (arts), if you use an external player, I supose you can still pass the volume parameter to it in the same line, not tested though. Jesús. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
On Wednesday 25 October 2006 19:59, Richard Fish wrote: What is odd is that my local tree which is a few days old has the right digests. [1] http://sources.gentoo.org/viewcvs.py/gentoo-x86/media-video/mplayer/Manifest Hmmm.. If you look at the diffs for the previous commits it seems that blubb is for some reason producing broken digests.. It has been fixed twice today. Once by lu_zero and once by beandog. So apparently it has nothing to do with upstream after all... -- Bo Andresen pgpZvYMqfkIOS.pgp Description: PGP signature
Re: [gentoo-user] problem emerging mplayer
On 10/25/06, Bo Ørsted Andresen [EMAIL PROTECTED] wrote: Hmmm.. If you look at the diffs for the previous commits it seems that blubb is for some reason producing broken digests.. It has been fixed twice today. Once by lu_zero and once by beandog. So apparently it has nothing to do with upstream after all... Hey, sounds like we got our first Devmatch!! :-D http://thread.gmane.org/gmane.linux.gentoo.devel/43534/focus=43534 -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problem emerging mplayer
On 10/25/06, Bo Ørsted Andresen [EMAIL PROTECTED] wrote: On Wednesday 25 October 2006 19:59, Richard Fish wrote: What is odd is that my local tree which is a few days old has the right digests. [1] http://sources.gentoo.org/viewcvs.py/gentoo-x86/media-video/mplayer/Manifest Hmmm.. If you look at the diffs for the previous commits it seems that blubb is for some reason producing broken digests.. It has been fixed twice today. Once by lu_zero and once by beandog. So apparently it has nothing to do with upstream after all... BTW, just spoke to blubb on IRC. He's aware he has a problem. -Richard -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Audiocd:// broken (was: Amarok and getting started)
On Wed, 25 Oct 2006 20:04:57 +, b.n. wrote: Raymond Lewis Rebbeck ha scritto: An easy way to rip cds is to go to 'audiocd://' in konqueror, then it will show some folders containing mp3s, oggs and flac files which you can then copy and paste to whereever you want and the cd ripping and encoding will be handled transparently for you. When, months ago, kde 3.5 went stable and I switched, my audiocd:// seems horribly broken. Sad, because I did love that feature a lot. Do you have kde-base/kdemultimedia-kioslaves installed? It's system:/media/cd now. -- Neil Bothwick Power corrupts. Absolute power is kind of neat. signature.asc Description: PGP signature
Re: [gentoo-user] xmms alternative
On Wednesday 25 October 2006 08:49, Mick wrote: On Tuesday 24 October 2006 22:29, Hemmann, Volker Armin wrote: On Tuesday 24 October 2006 22:59, Willie Wong wrote: I have one question about xmms alternatives: xmms has this remote control feature that I use a lot (I have keys on my multimedia keyboard bound to remote controls and also certain voice commands bound to playing and stopping of music), can someone point me to an alternative of xmms that also supports remote controls? Thanks in advance, amarok I was able to control amarok with my mobile phone and bluetooth... Cool! Have you a HOWTO? not anymore - I have a razr v3i now - and its bluetooth implementation is pretty crippled compared to my old SE -- gentoo-user@gentoo.org mailing list
[gentoo-user] OT - grep: The -P option is not supported
I have a script I wrote a couple of weeks ago. Part of the script scans email files and returns IP addresses found in them. I did this with this command: cat * | grep -Po \[\d+\.\d+\.\d+\.\d+\] It worked fine right up until this afternoon. Now I get this: [EMAIL PROTECTED] ~/spam $ cat * | grep -Po \[\d+\.\d+\.\d+\.\d+\] grep: The -P option is not supported [EMAIL PROTECTED] ~/spam $ AFAIK, the only thing I've done between when it worked this morning and when it didn't this afternoon is started an emerge -ND world on bullet. Has anyone experienced this? Should it go away on its own after the emerge finishes, or is this functionality that has been phased out? What can I do about it otherwise? -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On 25 October 2006 20:01, Jesús Guerrero wrote: Go to kcontrol - sounds multimedia - system notifications Then, press the prefferences button at the right bottom corner, there you can set the volume, but only if you are using the kde sound system (arts), if you use an external player, I supose you can still pass the volume parameter to it in the same line, not tested though. Thanks. I didn't notice the volume control because it was set to No audio output. :-( Uwe -- Mark Twain: I rather decline two drinks than a German adjective. http://www.SysEx.com.na -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT - grep: The -P option is not supported
Michael Sullivan wrote: I have a script I wrote a couple of weeks ago. Part of the script scans email files and returns IP addresses found in them. I did this with this command: cat * | grep -Po \[\d+\.\d+\.\d+\.\d+\] It worked fine right up until this afternoon. Now I get this: [EMAIL PROTECTED] ~/spam $ cat * | grep -Po \[\d+\.\d+\.\d+\.\d+\] grep: The -P option is not supported [EMAIL PROTECTED] ~/spam $ more /usr/portage/sys-apps/grep/ChangeLog *grep-2.5.1a-r1 (01 Aug 2006) 01 Aug 2006; Mike Frysinger [EMAIL PROTECTED] +grep-2.5.1a-r1.ebuild: Add back in pcre #141609. I suspect that's the issue, that your new grep is missing pcre, though it's hard to tell since you didn't mention which version of grep you have installed. Additionally pcre became a use flag in 2.5.1a-r1 kashani -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] OT - grep: The -P option is not supported
On Wednesday 25 October 2006 20:51, Michael Sullivan wrote: [SNIP] cat * | grep -Po \[\d+\.\d+\.\d+\.\d+\] ;) http://www.ruhr.de/home/smallo/award.html It worked fine right up until this afternoon. Now I get this: [EMAIL PROTECTED] ~/spam $ cat * | grep -Po \[\d+\.\d+\.\d+\.\d+\] grep: The -P option is not supported [EMAIL PROTECTED] ~/spam $ [SNIP] My guess would be that you need to enable a pcre use flag for sys-apps/grep. -- Bo Andresen pgpcgrLxQVMMC.pgp Description: PGP signature
[gentoo-user] Problems compiling cyrus-sasl
Have anyone had problems while compiling cyrus-sasl? I got this: /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/../../../../x86_64-pc-linux-gnu/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[2]: *** [libsasldb.la] Error 1 make[2]: Leaving directory `/var/tmp/portage/dev-libs/cyrus-sasl-2.1.22/work/cyrus-sasl-2.1.22/plugins' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/dev-libs/cyrus-sasl-2.1.22/work/cyrus-sasl-2.1.22' make: *** [all] Error 2 !!! ERROR: dev-libs/cyrus-sasl-2.1.22 failed. Call stack: ebuild.sh, line 1568: Called dyn_compile ebuild.sh, line 937: Called src_compile cyrus-sasl-2.1.22.ebuild, line 166: Called die Any hints? -- gentoo-user@gentoo.org mailing list
[gentoo-user] How to discover what is the package of a given file?
Hi list, How to discover what is the package of a given file? Should I use emerge command?Leandro
Re: [gentoo-user] How to discover what is the package of a given file?
On 18:58 Wed 25 Oct , Leandro Melo de Sales wrote: Hi list, How to discover what is the package of a given file? Should I use emerge command? Leandro if i've understood your question right then may be, # equery belongs file equery comes with gentoolkit. # emerge gentoolkit -- New crypt. See /usr/news/crypt. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How to discover what is the package of a given file?
On AD 2006 October 26 Thursday 03:44:29 AM +0530, Vikas Kumar wrote: # equery belongs file equery comes with gentoolkit. # emerge gentoolkit You can alternatively try qfile from portage-utils. # emerge portage-utils $ qfile $(which file) -- gentoo-user@gentoo.org mailing list
[gentoo-user] cyrus-sasl error.
Hi, I'm trying to update openldap and one of package dependency is cyrus-sasl, but when emerge compile cyrus-sasl package, it shows the following message:# emerge cyrus-saslCalculating dependencies... done! Emerging (1 of 1) dev-libs/cyrus-sasl-2.1.22 to /* cyrus-sasl-2.1.22.tar.gz MD5 ;-) ... ... ..x86_64-pc-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib64/libdb- 4.2.so -lresolv -march=athlon64 -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22/usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/../../../../x86_64-pc-linux-gnu/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad valuecollect2: ld returned 1 exit statusmake[2]: *** [libsasldb.la] Error 1make[2]: Leaving directory `/var/tmp/portage/cyrus- sasl-2.1.22/work/cyrus-sasl-2.1.22/plugins'make[1]: *** [all-recursive] Error 1make[1]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus-sasl-2.1.22'make: *** [all] Error 2!!! ERROR: dev-libs/cyrus- sasl-2.1.22 failed.Call stack: ebuild.sh, line 1546: Called dyn_compile ebuild.sh, line 937: Called src_compile cyrus-sasl-2.1.22.ebuild, line 166: Called dieAny clue/suggestion will be greatfully accepted. Thank you. Leandro
Re: [gentoo-user] cyrus-sasl error.
Best guess it that one of the files is currupted or has an update. Try and emerge --sync then try again. Hi, I'm trying to update openldap and one of package dependency is cyrus-sasl, but when emerge compile cyrus-sasl package, it shows the following message: # emerge cyrus-sasl Calculating dependencies... done! Emerging (1 of 1) dev-libs/cyrus-sasl-2.1.22 to / * cyrus-sasl-2.1.22.tar.gz MD5 ;-) ... ... ... ... x86_64-pc-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib64/libdb-4.2.so -lresolv -march=athlon64 -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22 /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/../../../../x86_64-pc-linux-gnu/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[2]: *** [libsasldb.la] Error 1 make[2]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus- sasl-2.1.22/plugins' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus- sasl-2.1.22' make: *** [all] Error 2 !!! ERROR: dev-libs/cyrus-sasl-2.1.22 failed. Call stack: ebuild.sh, line 1546: Called dyn_compile ebuild.sh, line 937: Called src_compile cyrus-sasl-2.1.22.ebuild, line 166: Called die Any clue/suggestion will be greatfully accepted. Thank you. Leandro -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cyrus-sasl error.
Can you do a emerge -upv dev-libs/cyrus-sasl and post? I'd like to see your use flags. Leandro Melo de Sales wrote: Hi, I'm trying to update openldap and one of package dependency is cyrus-sasl, but when emerge compile cyrus-sasl package, it shows the following message: # emerge cyrus-sasl Calculating dependencies... done! Emerging (1 of 1) dev-libs/cyrus-sasl-2.1.22 to / * cyrus-sasl-2.1.22.tar.gz MD5 ;-) ... ... ... ... x86_64-pc-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib64/libdb- 4.2.so http://4.2.so -lresolv -march=athlon64 -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22 /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/../../../../x86_64-pc-linux-gnu/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[2]: *** [libsasldb.la http://libsasldb.la] Error 1 make[2]: Leaving directory `/var/tmp/portage/cyrus- sasl-2.1.22/work/cyrus-sasl-2.1.22/plugins' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus-sasl-2.1.22' make: *** [all] Error 2 !!! ERROR: dev-libs/cyrus- sasl-2.1.22 failed. Call stack: ebuild.sh, line 1546: Called dyn_compile ebuild.sh, line 937: Called src_compile cyrus-sasl-2.1.22.ebuild, line 166: Called die Any clue/suggestion will be greatfully accepted. Thank you. Leandro -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How to discover what is the package of a given file?
Hello, Isn't qfile deprecated? - Neil On 16:35 Wed 25 Oct , Justin Findlay wrote: On AD 2006 October 26 Thursday 03:44:29 AM +0530, Vikas Kumar wrote: # equery belongs file equery comes with gentoolkit. # emerge gentoolkit You can alternatively try qfile from portage-utils. # emerge portage-utils $ qfile $(which file) -- gentoo-user@gentoo.org mailing list -- / / - |--|--| /-//-/ |\-|---- / /||-|-| - / / |\- \ \ -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How to discover what is the package of a given file?
Thank you Vikas and Justin. It works for me. Leandro 26 Oct 2006 03:44:29 +0530, Vikas Kumar [EMAIL PROTECTED]: On 18:58 Wed 25 Oct , Leandro Melo de Sales wrote: Hi list, How to discover what is the package of a given file? Should I use emerge command? Leandro if i've understood your question right then may be, # equery belongs file equery comes with gentoolkit. # emerge gentoolkit -- New crypt. See /usr/news/crypt. -- gentoo-user@gentoo.org mailing list -- Leandro Melo de Sales. Computer Science MSc Candidate Distributed System Lab - lsd.ufcg.edu.br Pervasive Computing Lab - embedded.ufcg.edu.br Federal University of Campina Grande - UFCG 083 33101404 (extension 208) O guerreiro é forte em lealdade, intensidade, determinação, iniciativa, persistência, coragem e força de vontade. O guerreiro é leve em sua calma, autoconfiança e compaixão. O guerreiro é freqüentemente chamado para tomar a frente quando outros covardemente dão um passo atrás. Guerreiros existem nos campos de batalha e na vida cotidiana. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cyrus-sasl error.
Please, for those one that has this same problem go to: http://bugs.gentoo.org/show_bug.cgi?id=152544 http://bugs.gentoo.org/show_bug.cgi?id=152665 Leandro. 2006/10/25, Jamie [EMAIL PROTECTED]: Best guess it that one of the files is currupted or has an update. Try and emerge --sync then try again. Hi, I'm trying to update openldap and one of package dependency is cyrus-sasl, but when emerge compile cyrus-sasl package, it shows the following message: # emerge cyrus-sasl Calculating dependencies... done! Emerging (1 of 1) dev-libs/cyrus-sasl-2.1.22 to / * cyrus-sasl-2.1.22.tar.gz MD5 ;-) ... ... ... ... x86_64-pc-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib64/libdb-4.2.so -lresolv -march=athlon64 -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22 /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/../../../../x86_64-pc-linux-gnu/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[2]: *** [libsasldb.la] Error 1 make[2]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus- sasl-2.1.22/plugins' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus- sasl-2.1.22' make: *** [all] Error 2 !!! ERROR: dev-libs/cyrus-sasl-2.1.22 failed. Call stack: ebuild.sh, line 1546: Called dyn_compile ebuild.sh, line 937: Called src_compile cyrus-sasl-2.1.22.ebuild, line 166: Called die Any clue/suggestion will be greatfully accepted. Thank you. Leandro -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cyrus-sasl error.
Yeah, the updates work. If you're really lazy, I have stuck this in my overlay since I had to do it on multiple systems: https://embassy.asylumware.com/projects/portage sincerely, joshua On 10/25/06, Leandro Melo de Sales [EMAIL PROTECTED] wrote: Please, for those one that has this same problem go to: http://bugs.gentoo.org/show_bug.cgi?id=152544 http://bugs.gentoo.org/show_bug.cgi?id=152665 Leandro. 2006/10/25, Jamie [EMAIL PROTECTED]: Best guess it that one of the files is currupted or has an update. Try and emerge --sync then try again. Hi, I'm trying to update openldap and one of package dependency is cyrus-sasl, but when emerge compile cyrus-sasl package, it shows the following message: # emerge cyrus-sasl Calculating dependencies... done! Emerging (1 of 1) dev-libs/cyrus-sasl-2.1.22 to / * cyrus-sasl-2.1.22.tar.gz MD5 ;-) ... ... ... ... x86_64-pc-linux-gnu-gcc -shared .libs/sasldb.o .libs/sasldb_init.o .libs/plugin_common.o -Wl,--whole-archive ../sasldb/.libs/libsasldb.a -Wl,--no-whole-archive /usr/lib64/libdb-4.2.so -lresolv -march=athlon64 -Wl,-soname -Wl,libsasldb.so.2 -o .libs/libsasldb.so.2.0.22 /usr/lib/gcc/x86_64-pc-linux-gnu/3.4.6/../../../../x86_64-pc-linux-gnu/bin/ld: ../sasldb/.libs/libsasldb.a(allockey.o): relocation R_X86_64_32S against `a local symbol' can not be used when making a shared object; recompile with -fPIC ../sasldb/.libs/libsasldb.a(allockey.o): could not read symbols: Bad value collect2: ld returned 1 exit status make[2]: *** [libsasldb.la] Error 1 make[2]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus- sasl-2.1.22/plugins' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/cyrus-sasl-2.1.22/work/cyrus- sasl-2.1.22' make: *** [all] Error 2 !!! ERROR: dev-libs/cyrus-sasl-2.1.22 failed. Call stack: ebuild.sh, line 1546: Called dyn_compile ebuild.sh, line 937: Called src_compile cyrus-sasl-2.1.22.ebuild, line 166: Called die Any clue/suggestion will be greatfully accepted. Thank you. Leandro -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] gentoo wirelesss access point
W.Kenworthy wrote: Can someone point me to a document so I can set up a gentoo laptop with a built in ipw2200 wireless as an access point using wpa ??? I need to use it for a demo of some wireless 802.11 phones. Looking at the conf.d/net file doesnt show what I need to fill out to get a working access point. Or is this best done manually (iwconfig and wpa_supplicant) BillK Look on www.gentoo-wiki.com, not sure if the IPW2200 card will act as an access point or not. i know I set up just want you are looking for at one point in time on a prisum2.5 card. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] gentoo wirelesss access point
On Wednesday 25 October 2006 14:48, W.Kenworthy wrote: Can someone point me to a document so I can set up a gentoo laptop with a built in ipw2200 wireless as an access point using wpa ??? I need to use it for a demo of some wireless 802.11 phones. Looking at the conf.d/net file doesnt show what I need to fill out to get a working access point. Or is this best done manually (iwconfig and wpa_supplicant) BillK The drivers in the kernel and the ipw2200 ebuild don't support master mode. This project: http://sourceforge.net/projects/ipw2200-ap adds master mode support for ipw2200 cards although I have no idea what state it is in. It's not in portage but there are probably ebuilds floating around somewhere for it. -- Raymond Lewis Rebbeck -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] [OT] Amorok and getting started.
On Wednesday 25 October 2006 16:31, Dale wrote: postgres postgres just works, i wont say is there any big difference compared with mysql. -- gentoo-user@gentoo.org mailing list
[gentoo-user] NSS + LDAP: My nscd daemon dies periodically
Hi my nscd daemon dies periodically and I don't know what is happening... any suggestion? (nss_ldap: failed to bind to LDAP server ldap://127.0.0.1: Can't contact LDAP server) []s Leandro. -- gentoo-user@gentoo.org mailing list
