[gentoo-user] webcam on Gentoo Logitech C270
I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y lsusb ... Bus 008 Device 006: ID 046d:0825 Logitech, Inc. Webcam C270 When I plug the USB cam I get an error: xhci_hcd :02:00.0: ERROR: unexpected command completion code 0x11. usb 8-1: Not enough bandwidth for altsetting 4 6:3:4: usb_set_interface failed (-22) -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y lsusb ... Bus 008 Device 006: ID 046d:0825 Logitech, Inc. Webcam C270 When I plug the USB cam I get an error: xhci_hcd :02:00.0: ERROR: unexpected command completion code 0x11. usb 8-1: Not enough bandwidth for altsetting 4 6:3:4: usb_set_interface failed (-22) I have plug the webcam to standard USB-2 port and it is recognized I think: [ 3321.717170] usb 3-2: usb_probe_device [ 3321.717173] usb 3-2: configuration #1 chosen from 1 choice [ 3321.717337] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 3321.717369] usb 3-2: adding 3-2:1.1 (config #1, interface 1) [ 3321.717387] usb 3-2: adding 3-2:1.2 (config #1, interface 2) [ 3321.717406] snd-usb-audio 3-2:1.2: usb_probe_interface [ 3321.717409] snd-usb-audio 3-2:1.2: usb_probe_interface - got id [ 3323.136617] set resolution quirk: cval-res = 384 [ 3323.137048] usb 3-2: adding 3-2:1.3 (config #1, interface 3) But I can not see it in skype setting. -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER ... Regards wabe
Re: [gentoo-user] webcam on Gentoo Logitech C270
waben...@gmail.com waben...@gmail.com [14-12-21 18:36]: Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER ... Regards wabe You need UVC-Support: CONFIG_USB_F_UVC=y Best Meino
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/14 18:56, meino.cra...@gmx.de wrote: waben...@gmail.com waben...@gmail.com [14-12-21 18:36]: Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER ... Regards wabe You need UVC-Support: CONFIG_USB_F_UVC=y I'm using kernle: linux-3.10.7 but there is no CONFIG_USB_F_UVC setting, I can not find anything for UVC grep UVC .config I get empty line. -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/14 18:32, waben...@gmail.com wrote: Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER I have enable CONFIG_MEDIA_USB_SUPPORT and CONFIG_MEDIA_CAMERA_SUPPORT but skype still is not recogizing it. grep MEDIA .config CONFIG_MEDIA_SUPPORT=y CONFIG_MEDIA_CAMERA_SUPPORT=y # CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set # CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set # CONFIG_MEDIA_RADIO_SUPPORT is not set # CONFIG_MEDIA_RC_SUPPORT is not set # CONFIG_MEDIA_CONTROLLER is not set CONFIG_MEDIA_USB_SUPPORT=y # CONFIG_MEDIA_PCI_SUPPORT is not set CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_SND_HDA_CODEC_CMEDIA=y # CONFIG_STAGING_MEDIA is not set What other setting did I miss? -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
Joseph syscon...@gmail.com [14-12-21 19:24]: On 12/21/14 18:56, meino.cra...@gmx.de wrote: waben...@gmail.com waben...@gmail.com [14-12-21 18:36]: Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER ... Regards wabe You need UVC-Support: CONFIG_USB_F_UVC=y I'm using kernle: linux-3.10.7 but there is no CONFIG_USB_F_UVC setting, I can not find anything for UVC grep UVC .config I get empty line. -- Joseph Hi Joseph, Ooops...I am using 3.18.1 vanilla here. Derek Molloy runs this camera on a beaglebone black (an ambedded Linux system)... Forget the part regarding the Beaglebone Black, but Linux is Linux is Linux is Linux :) Therefore the hints on kernel configuration items should be hopefully usable for you. His webpage is here: http://derekmolloy.ie/tag/c920/ May be this is of interest for you too: http://www.oz9aec.net/index.php/gstreamer/473-using-the-logitech-c920-webcam-with-gstreamer http://forum.ubuntuusers.de/topic/logitech-c920-webcam/ *** This links were presented to you by Google *** ;) HTH! Best Meino
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/14 11:22, Joseph wrote: On 12/21/14 18:56, meino.cra...@gmx.de wrote: waben...@gmail.com waben...@gmail.com [14-12-21 18:36]: Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER ... Regards wabe You need UVC-Support: CONFIG_USB_F_UVC=y I'm using kernle: linux-3.10.7 but there is no CONFIG_USB_F_UVC setting, I can not find anything for UVC grep UVC .config I get empty line. I have fond setting in kernel 3.10 for UVC grep USB_VIDEO_CLASS .config CONFIG_USB_VIDEO_CLASS=y (USB Video Class (UVC)) but I still don't see the USB camera in skype. -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
On Sun, Dec 21, 2014 at 8:49 PM, Joseph syscon...@gmail.com wrote: On 12/21/14 11:22, Joseph wrote: On 12/21/14 18:56, meino.cra...@gmx.de wrote: waben...@gmail.com waben...@gmail.com [14-12-21 18:36]: Am Sonntag, 21.12.2014 um 10:00 schrieb Joseph syscon...@gmail.com: On 12/21/14 09:51, Joseph wrote: I have a Logitech C270 webcam but I can not make it to work with linux/skype USB sound in kernel is ON: CONFIG_SND_USB_AUDIO=y I guess you should also take a look at Device Drivers Multimedia support Media USB Adapters e.g. MEDIA_USB_SUPPORT MEDIA_CAMERA_SUPPORT MEDIA_CONTROLLER ... Regards wabe You need UVC-Support: CONFIG_USB_F_UVC=y I'm using kernle: linux-3.10.7 but there is no CONFIG_USB_F_UVC setting, I can not find anything for UVC grep UVC .config I get empty line. I have fond setting in kernel 3.10 for UVC grep USB_VIDEO_CLASS .config CONFIG_USB_VIDEO_CLASS=y (USB Video Class (UVC)) but I still don't see the USB camera in skype. -- Joseph Do you have these enabled and set? grep '^CONFIG.*V4L' /usr/src/linux/.config CONFIG_VIDEO_V4L2=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_SUPPORT=m CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_MEDIA_PCI_SUPPORT=y grep -s ^LD_PRELOAD .* .bash_profile:LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so Also, you may want to try plugging you webcam into a USB2 port, if available, instead of a USB3 one, as suggested here, http://linux-kernel.2935.n7.nabble.com/3-15-8-USB-issue-with-uvc-cam-td920378.html . Hope this helps.
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/14 22:08, Alexander Kapshuk wrote: Do you have these enabled and set? grep '^CONFIG.*V4L' /usr/src/linux/.config CONFIG_VIDEO_V4L2=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_SUPPORT=m CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_MEDIA_PCI_SUPPORT=y grep -s ^LD_PRELOAD .* .bash_profile:LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so Also, you may want to try plugging you webcam into a USB2 port, if available, instead of a USB3 one, as suggested here, [6]http://linux-kernel.2935.n7.nabble.com/3-15-8-USB-issue-with-uvc-cam -td920378.html. Hope this helps. References 1. mailto:syscon...@gmail.com 2. mailto:meino.cra...@gmx.de 3. mailto:waben...@gmail.com 4. mailto:waben...@gmail.com 5. mailto:syscon...@gmail.com 6. http://linux-kernel.2935.n7.nabble.com/3-15-8-USB-issue-with-uvc-cam-td920378.html I just did: grep '^CONFIG.*V4L' /usr/src/linux/.config CONFIG_VIDEO_V4L2=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_SUPPORT=y CONFIG_USB_VIDEO_CLASS=y CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m I think there is no need to enable the above: CONFIG_USB_GSPCA=m since nome of the dirvr are enabled as module. CONFIG_MEDIA_PCI_SUPPORT=y I run as user: LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so Yes, USB web-cam is plugged to USB2 But still skype does not recogines it :-( -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/14 22:08, Alexander Kapshuk wrote: grep '^CONFIG.*V4L' /usr/src/linux/.config CONFIG_VIDEO_V4L2=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_SUPPORT=m CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_MEDIA_PCI_SUPPORT=y grep -s ^LD_PRELOAD .* .bash_profile:LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so Also, you may want to try plugging you webcam into a USB2 port, if available, instead of a USB3 one, as suggested here, [6]http://linux-kernel.2935.n7.nabble.com/3-15-8-USB-issue-with-uvc-cam -td920378.html. Hope this helps. When I try to run: guvcview I get: guvcview 1.6.1 ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm_route.c:947:(find_matching_chmap) Found no matching channel map video device: /dev/video0 ERROR opening V4L2 interface for /dev/video0 unable to detect video devices on your system (0) ERROR opening V4L interface: Permission denied Init video returned -1 VIDIOC_REQBUFS - Failed to delete buffers: Inappropriate ioctl for device (errno 25) cleaned allocations - 100% Closing portaudio ...OK -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
Joseph syscon...@gmail.com [14-12-22 03:52]: On 12/21/14 22:08, Alexander Kapshuk wrote: grep '^CONFIG.*V4L' /usr/src/linux/.config CONFIG_VIDEO_V4L2=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_SUPPORT=m CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_MEDIA_PCI_SUPPORT=y grep -s ^LD_PRELOAD .* .bash_profile:LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so Also, you may want to try plugging you webcam into a USB2 port, if available, instead of a USB3 one, as suggested here, [6]http://linux-kernel.2935.n7.nabble.com/3-15-8-USB-issue-with-uvc-cam -td920378.html. Hope this helps. When I try to run: guvcview I get: guvcview 1.6.1 ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm_route.c:947:(find_matching_chmap) Found no matching channel map video device: /dev/video0 ERROR opening V4L2 interface for /dev/video0 unable to detect video devices on your system (0) ERROR opening V4L interface: Permission denied Init video returned -1 VIDIOC_REQBUFS - Failed to delete buffers: Inappropriate ioctl for device (errno 25) cleaned allocations - 100% Closing portaudio ...OK -- Joseph Hi Joseph, in conjucntion with the C920 I found that guvcview does not plai well with it. First try to get anything from your webcam, before trying Skype or such - so you have to fight against too many open ends or failure sources. Do you have gstreamer installed? Try this command/shell script: You have to adopt the device options to you setup. It will record and display the video stream. #! /bin/zsh td=`date +%Y-%m-%d-%Hh%Mh%Ss` fn=c920-$td.mp4 gst-launch-1.0 v4l2src device=/dev/video1 ! video/x-h264,width=1920,height=1080,framerate=30/1 ! h264parse ! muxout. alsasrc device=hw:3,0 ! queue ! audioconvert ! lamemp3enc ! muxout. matroskamux name=muxout streamable=true ! filesink location=$fn mplayer $fn HTH! Best regards, Meino
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/22/14 04:00, meino.cra...@gmx.de wrote: Joseph syscon...@gmail.com [14-12-22 03:52]: On 12/21/14 22:08, Alexander Kapshuk wrote: grep '^CONFIG.*V4L' /usr/src/linux/.config CONFIG_VIDEO_V4L2=m CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_MEDIA_SUPPORT=m CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m CONFIG_MEDIA_PCI_SUPPORT=y grep -s ^LD_PRELOAD .* .bash_profile:LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so Also, you may want to try plugging you webcam into a USB2 port, if available, instead of a USB3 one, as suggested here, [6]http://linux-kernel.2935.n7.nabble.com/3-15-8-USB-issue-with-uvc-cam -td920378.html. Hope this helps. When I try to run: guvcview I get: guvcview 1.6.1 ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib /var/tmp/portage/media-libs/alsa-lib-1.0.28/work/alsa-lib-1.0.28/src/pcm/pcm_route.c:947:(find_matching_chmap) Found no matching channel map video device: /dev/video0 ERROR opening V4L2 interface for /dev/video0 unable to detect video devices on your system (0) ERROR opening V4L interface: Permission denied Init video returned -1 VIDIOC_REQBUFS - Failed to delete buffers: Inappropriate ioctl for device (errno 25) cleaned allocations - 100% Closing portaudio ...OK -- Joseph Hi Joseph, in conjucntion with the C920 I found that guvcview does not plai well with it. First try to get anything from your webcam, before trying Skype or such - so you have to fight against too many open ends or failure sources. Do you have gstreamer installed? Try this command/shell script: You have to adopt the device options to you setup. It will record and display the video stream. #! /bin/zsh td=`date +%Y-%m-%d-%Hh%Mh%Ss` fn=c920-$td.mp4 gst-launch-1.0 v4l2src device=/dev/video1 ! video/x-h264,width=1920,height=1080,framerate=30/1 ! h264parse ! muxout. alsasrc device=hw:3,0 ! queue ! audioconvert ! lamemp3enc ! muxout. matroskamux name=muxout streamable=true ! filesink location=$fn mplayer $fn HTH! Best regards, Meino I can get a video when I run guvcview with banch of errors: vid:046d pid:0825 driver:uvcvideo mapping control for Pan (relative) UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Tilt (relative) UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Pan Reset UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Tilt Reset UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Focus (absolute) UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for LED1 Mode UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for LED1 Frequency UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Disable video processing UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Raw bits per pixel UVCIOC_CTRL_MAP - Error: No such file or directory mapping control for Off UVCIOC_CTRL_MAP - Error: Inappropriate ioctl for device checking format: 1196444237 VIDIOC_G_COMP:: Inappropriate ioctl for device fps is set to 1/25 drawing controls Checking video mode 640x480@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable When I try to record anything bunch of errors messages popping up in command line: (guvcview:5004): GConf-WARNING **: error creating revert set: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. I don't think this web-cam is Linux friendly :-/ Are there any alternative, web-cam that support Linux 100% -- Joseph
Re: [gentoo-user] webcam on Gentoo Logitech C270
On 12/21/2014 06:49 PM, Joseph wrote: When I try to run: guvcview video device: /dev/video0 ERROR opening V4L2 interface for /dev/video0 unable to detect video devices on your system (0) ERROR opening V4L interface: Permission denied It can't open the device. You probably aren't in the right group for access. I suspect it'd be the video group, just do: ls -lhd /dev/video0 ...and see what the permissions are, it's probably going to be root:video. For my mythtv card, I know for sure it's root:video. If that's all it is, use gpasswd and add yourself to the group then log out and in again. Dan
Re: [gentoo-user] webcam on Gentoo Logitech C270 - almost there.
On 12/21/14 19:58, Daniel Frey wrote: On 12/21/2014 06:49 PM, Joseph wrote: When I try to run: guvcview video device: /dev/video0 ERROR opening V4L2 interface for /dev/video0 unable to detect video devices on your system (0) ERROR opening V4L interface: Permission denied It can't open the device. You probably aren't in the right group for access. I suspect it'd be the video group, just do: ls -lhd /dev/video0 ...and see what the permissions are, it's probably going to be root:video. For my mythtv card, I know for sure it's root:video. If that's all it is, use gpasswd and add yourself to the group then log out and in again. Dan YES, that was it. I was fighting with it all afternoon and it was so simple :-/ Though, the video and voice work with guvcview and can record it and save it but with skype only video works. I think the problem is pulse audio, skype only show pulse audio option; guvcview allow me to switch to: USB Device 0x46d:0x825 Audio. How to force skype to USB Device Audio? -- Joseph
Re: [gentoo-user] webcam software
On Tue, Jan 21 2014, Canek Peláez Valdés wrote: On Tue, Jan 21, 2014 at 9:30 PM, gottl...@nyu.edu wrote: On Sat, Jan 18 2014, Canek Peláez Valdés wrote: On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. Thank you canek (and walt, james, and eroen) but I didn't make clear the level of my ignorance. I have never used a webcam, but I recently became a grandfather so figured I should learn. I must need a driver for the camera. According to lsusb I have Bus 001 Device 004: ID 0c45:646b Microdia (the 400 line verbose output is at the end of this msg). [snip] But, as I mentioned, I am a complete novice with webcams and wonder if I am way off base here. Is the above the right path to follow? [Humongous snip] Ah, you need first the drivers then. Don't bother with out-of-tree drivers. Try (directly in your kernel) USB_VIDEO_CLASS (a.k.a. UVC), CONFIG_USB_GSPCA, and if that doesn't work enable all of CONFIG_USB_GSPCA_*. Mine works only with CONFIG_USB_GSPCA. After loading the modules, or booting with the new kernel, see if you have /dev/v4l (it's a dir). Then any modern software (e.g., Cheese or google-talkplugin) will autodetect the camera. Regards. Sounds like a plan. thanks, allan
Re: [gentoo-user] webcam software
On Wednesday 22 Jan 2014 12:52:25 gottl...@nyu.edu wrote: On Tue, Jan 21 2014, Canek Peláez Valdés wrote: On Tue, Jan 21, 2014 at 9:30 PM, gottl...@nyu.edu wrote: On Sat, Jan 18 2014, Canek Peláez Valdés wrote: On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. Thank you canek (and walt, james, and eroen) but I didn't make clear the level of my ignorance. I have never used a webcam, but I recently became a grandfather so figured I should learn. I must need a driver for the camera. According to lsusb I have Bus 001 Device 004: ID 0c45:646b Microdia (the 400 line verbose output is at the end of this msg). [snip] But, as I mentioned, I am a complete novice with webcams and wonder if I am way off base here. Is the above the right path to follow? [Humongous snip] Ah, you need first the drivers then. Don't bother with out-of-tree drivers. Try (directly in your kernel) USB_VIDEO_CLASS (a.k.a. UVC), CONFIG_USB_GSPCA, and if that doesn't work enable all of CONFIG_USB_GSPCA_*. Mine works only with CONFIG_USB_GSPCA. After loading the modules, or booting with the new kernel, see if you have /dev/v4l (it's a dir). Then any modern software (e.g., Cheese or google-talkplugin) will autodetect the camera. Regards. Sounds like a plan. thanks, allan I have a similar camera (from lsusb): idVendor 0x0c45 Microdia idProduct 0x640e bcdDevice 95.06 iManufacturer 2 M092S-J00-9C14-SC1NT iProduct1 Laptop_Integrated_Webcam_2M These are modules enabled in the kernel: $ egrep -i GSPCA /usr/src/linux/.config CONFIG_USB_GSPCA=m # CONFIG_USB_GSPCA_BENQ is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_CPIA1 is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_JEILINJ is not set # CONFIG_USB_GSPCA_JL2005BCD is not set # CONFIG_USB_GSPCA_KINECT is not set # CONFIG_USB_GSPCA_KONICA is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_MR97310A is not set # CONFIG_USB_GSPCA_NW80X is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_OV534_9 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7302 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SE401 is not set # CONFIG_USB_GSPCA_SN9C2028 is not set CONFIG_USB_GSPCA_SN9C20X=m CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m # CONFIG_USB_GSPCA_SPCA500 is not set # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set # CONFIG_USB_GSPCA_SPCA561 is not set # CONFIG_USB_GSPCA_SPCA1528 is not set # CONFIG_USB_GSPCA_SQ905 is not set # CONFIG_USB_GSPCA_SQ905C is not set # CONFIG_USB_GSPCA_SQ930X is not set # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_STV0680 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TOPRO is not set # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_VICAM is not set # CONFIG_USB_GSPCA_XIRLINK_CIT is not set # CONFIG_USB_GSPCA_ZC3XX is not set I can't recall how I arrived at these, but probably Google helped me at the time. -- Regards, Mick signature.asc Description: This is a digitally signed message part.
Re: [gentoo-user] webcam software
On Wed, Jan 22 2014, Mick wrote: On Wednesday 22 Jan 2014 12:52:25 gottl...@nyu.edu wrote: On Tue, Jan 21 2014, Canek Peláez Valdés wrote: On Tue, Jan 21, 2014 at 9:30 PM, gottl...@nyu.edu wrote: On Sat, Jan 18 2014, Canek Peláez Valdés wrote: On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. Thank you canek (and walt, james, and eroen) but I didn't make clear the level of my ignorance. I have never used a webcam, but I recently became a grandfather so figured I should learn. I must need a driver for the camera. According to lsusb I have Bus 001 Device 004: ID 0c45:646b Microdia (the 400 line verbose output is at the end of this msg). [snip] But, as I mentioned, I am a complete novice with webcams and wonder if I am way off base here. Is the above the right path to follow? [Humongous snip] Ah, you need first the drivers then. Don't bother with out-of-tree drivers. Try (directly in your kernel) USB_VIDEO_CLASS (a.k.a. UVC), CONFIG_USB_GSPCA, and if that doesn't work enable all of CONFIG_USB_GSPCA_*. Mine works only with CONFIG_USB_GSPCA. After loading the modules, or booting with the new kernel, see if you have /dev/v4l (it's a dir). Then any modern software (e.g., Cheese or google-talkplugin) will autodetect the camera. Regards. Sounds like a plan. thanks, allan I have a similar camera (from lsusb): idVendor 0x0c45 Microdia idProduct 0x640e bcdDevice 95.06 iManufacturer 2 M092S-J00-9C14-SC1NT iProduct1 Laptop_Integrated_Webcam_2M These are modules enabled in the kernel: $ egrep -i GSPCA /usr/src/linux/.config CONFIG_USB_GSPCA=m # CONFIG_USB_GSPCA_BENQ is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_CPIA1 is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_JEILINJ is not set # CONFIG_USB_GSPCA_JL2005BCD is not set # CONFIG_USB_GSPCA_KINECT is not set # CONFIG_USB_GSPCA_KONICA is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_MR97310A is not set # CONFIG_USB_GSPCA_NW80X is not set # CONFIG_USB_GSPCA_OV519 is not set # CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_OV534_9 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7302 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SE401 is not set # CONFIG_USB_GSPCA_SN9C2028 is not set CONFIG_USB_GSPCA_SN9C20X=m CONFIG_USB_GSPCA_SONIXB=m CONFIG_USB_GSPCA_SONIXJ=m # CONFIG_USB_GSPCA_SPCA500 is not set # CONFIG_USB_GSPCA_SPCA501 is not set # CONFIG_USB_GSPCA_SPCA505 is not set # CONFIG_USB_GSPCA_SPCA506 is not set # CONFIG_USB_GSPCA_SPCA508 is not set # CONFIG_USB_GSPCA_SPCA561 is not set # CONFIG_USB_GSPCA_SPCA1528 is not set # CONFIG_USB_GSPCA_SQ905 is not set # CONFIG_USB_GSPCA_SQ905C is not set # CONFIG_USB_GSPCA_SQ930X is not set # CONFIG_USB_GSPCA_STK014 is not set # CONFIG_USB_GSPCA_STV0680 is not set # CONFIG_USB_GSPCA_SUNPLUS is not set # CONFIG_USB_GSPCA_T613 is not set # CONFIG_USB_GSPCA_TOPRO is not set # CONFIG_USB_GSPCA_TV8532 is not set # CONFIG_USB_GSPCA_VC032X is not set # CONFIG_USB_GSPCA_VICAM is not set # CONFIG_USB_GSPCA_XIRLINK_CIT is not set # CONFIG_USB_GSPCA_ZC3XX is not set I can't recall how I arrived at these, but probably Google helped me at the time. Thank you Mick. allan
Re: [gentoo-user] webcam software
On Sat, Jan 18 2014, Canek Peláez Valdés wrote: On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what qqq should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. For video conferencing, and if you and your interlocutors have already sold your souls to Google, Google Hangouts works remarkably well; I have use it for doing joint research remotely a couple of times, and it works great. You only need to emerge google-talkplugin. Regards.
Re: [gentoo-user] webcam software
On Sat, Jan 18 2014, Canek Peláez Valdés wrote: On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. For video conferencing, and if you and your interlocutors have already sold your souls to Google, Google Hangouts works remarkably well; I have use it for doing joint research remotely a couple of times, and it works great. You only need to emerge google-talkplugin. Regards. Thank you canek (and walt, james, and eroen) but I didn't make clear the level of my ignorance. I have never used a webcam, but I recently became a grandfather so figured I should learn. I must need a driver for the camera. According to lsusb I have Bus 001 Device 004: ID 0c45:646b Microdia (the 400 line verbose output is at the end of this msg). But I get no hits on google for that number (there are some close) gentoo-wiki.info lists several webcams but not mine then ends with Other If you can't identify the make or model or your webcam, try these drivers: media-video/gspcav1: supports many webcams based on various chipsets. List of supported devices at http://mxhaard.free.fr/spca5xx.html media-video/linux-uvc: supports many webcams following the UVC specification. List of supported devices at http://linux-uvc.berlios.de. A specific viewer luvcview is available. From the list at linux-uvc.berlios.de I see that 0c45 is Sonix Technology and the model number closest to mine 6409 is for a (different) dell laptop so I am guessing I should try media-video/linux-uvc. But, as I mentioned, I am a complete novice with webcams and wonder if I am way off base here. Is the above the right path to follow? thanks, allan PS Here is the verbose output for the webcam entry in lsusb Bus 001 Device 004: ID 0c45:646b Microdia Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize064 idVendor 0x0c45 Microdia idProduct 0x646b bcdDevice 24.16 iManufacturer 2 CN0RDHHF7248724LH7RYA00 iProduct1 Laptop_Integrated_Webcam_1.3M iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 695 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA ** UNRECOGNIZED: 28 ff 42 49 53 54 00 01 06 01 10 00 00 00 00 00 d1 10 f4 01 d2 11 f4 01 d3 12 f4 01 d4 13 f4 01 d5 14 f4 01 d6 15 f4 01 Interface Association: bLength 8 bDescriptorType11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 14 Video bFunctionSubClass 3 Video Interface Collection bFunctionProtocol 0 iFunction 5 Integrated Webcam Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass14 Video bInterfaceSubClass 1 Video Control bInterfaceProtocol 0 iInterface 5 Integrated Webcam VideoControl Interface Descriptor: bLength13 bDescriptorType36 bDescriptorSubtype 1 (HEADER) bcdUVC 1.00 wTotalLength 103 dwClockFrequency 15.00MHz bInCollection 1 baInterfaceNr( 0) 1 VideoControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 3 (OUTPUT_TERMINAL) bTerminalID 5 wTerminalType 0x0101 USB Streaming bAssocTerminal 0 bSourceID 4 iTerminal 0 VideoControl Interface Descriptor: bLength26 bDescriptorType36 bDescriptorSubtype 6 (EXTENSION_UNIT) bUnitID 3 guidExtensionCode {7033f028-1163-2e4a-ba2c-6890eb334016} bNumControl 8 bNrPins 1 baSourceID( 0) 2 bControlSize1 bmControls( 0) 0x1f iExtension 0 VideoControl Interface Descriptor: bLength
Re: [gentoo-user] webcam software
On Tue, Jan 21, 2014 at 9:30 PM, gottl...@nyu.edu wrote: On Sat, Jan 18 2014, Canek Peláez Valdés wrote: On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. For video conferencing, and if you and your interlocutors have already sold your souls to Google, Google Hangouts works remarkably well; I have use it for doing joint research remotely a couple of times, and it works great. You only need to emerge google-talkplugin. Regards. Thank you canek (and walt, james, and eroen) but I didn't make clear the level of my ignorance. I have never used a webcam, but I recently became a grandfather so figured I should learn. I must need a driver for the camera. According to lsusb I have Bus 001 Device 004: ID 0c45:646b Microdia (the 400 line verbose output is at the end of this msg). But I get no hits on google for that number (there are some close) gentoo-wiki.info lists several webcams but not mine then ends with Other If you can't identify the make or model or your webcam, try these drivers: media-video/gspcav1: supports many webcams based on various chipsets. List of supported devices at http://mxhaard.free.fr/spca5xx.html media-video/linux-uvc: supports many webcams following the UVC specification. List of supported devices at http://linux-uvc.berlios.de. A specific viewer luvcview is available. From the list at linux-uvc.berlios.de I see that 0c45 is Sonix Technology and the model number closest to mine 6409 is for a (different) dell laptop so I am guessing I should try media-video/linux-uvc. But, as I mentioned, I am a complete novice with webcams and wonder if I am way off base here. Is the above the right path to follow? [Humongous snip] Ah, you need first the drivers then. Don't bother with out-of-tree drivers. Try (directly in your kernel) USB_VIDEO_CLASS (a.k.a. UVC), CONFIG_USB_GSPCA, and if that doesn't work enable all of CONFIG_USB_GSPCA_*. Mine works only with CONFIG_USB_GSPCA. After loading the modules, or booting with the new kernel, see if you have /dev/v4l (it's a dir). Then any modern software (e.g., Cheese or google-talkplugin) will autodetect the camera. Regards. -- Canek Peláez Valdés Posgrado en Ciencia e Ingeniería de la Computación Universidad Nacional Autónoma de México
[gentoo-user] webcam software
My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. thanks, allan
Re: [gentoo-user] webcam software
On Jan 18, 2014 4:02 PM, gottl...@nyu.edu wrote: My main system is a dell latitude E6430s. I am embarrassed to say that, although I have had this system for a while, I just now realized that it has a build in webcam. What software do you recommend and what should I start reading to learn how to use it. To play with it, and of you already use GNOME, I recommend Cheese. It's actually fun to use. For video conferencing, and if you and your interlocutors have already sold your souls to Google, Google Hangouts works remarkably well; I have use it for doing joint research remotely a couple of times, and it works great. You only need to emerge google-talkplugin. Regards.
[gentoo-user] Webcam under linux-2.6.34.00
Hi, Recently I installed linux-2.6.34.00 (vanilla). I adopted the config file where (I thought) it need to. The previouse kernel I used was linux-2.6.32.13 (vanilla). With the old kernel I was able to use my Web Cam (Sony Playstation Eye/Omnivision ov534 according to usbview -- see below) via VLC media player 1.0.6 Goldeneye and via guvcview (I use a svn snapshot of this application). With the old kernel guvcview does not show any image control sliders but works fine so far. Using the new kernel, things are going wrong somehow When accessing the cam for the first time after a boot, there is often a video stream, but the image is much too bright. But guvcview offers image control sliders now even for my cam. But: Using that sliders or accessing the cam a second time after restarting as vlc as guvcview results in *nothing*: no stream, no picture. The real incarnation of a black whole. When starting guvcview from the command line it prints device temporarily not accessible/available or something like that. I haven't figured out whether the cam hangs or the driver goes nuts or... Powercycling of the Cam via usb unplugging/replugging does not help, though. I recompiled libv4l, guvcview and vlc when the new kernel was booted (and the /usr/src/linux symlink was set accordinglingly) but the result was the same. What can I do to access and use my webcam under linux-2.6.34.00 successfully? Below I included information about my system according the webcam: usbview -v: Bus 001 Device 003: ID 1415:2000 Nam Tai EE Products Ltd. or OmniVision Technologies, Inc. Sony Playstation Eye Device Descriptor: bLength18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize064 idVendor 0x1415 Nam Tai EE Products Ltd. or OmniVision Technologies, Inc. idProduct 0x2000 Sony Playstation Eye bcdDevice1.00 iManufacturer 1 OmniVision Technologies, Inc. iProduct2 USB Camera-B4.04.27.1 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 142 bNumInterfaces 3 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes2 Transfer TypeBulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes3 Transfer TypeInterrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber1 bAlternateSetting 0 bNumEndpoints 0 bInterfaceClass 1 Audio bInterfaceSubClass 1 Control Device bInterfaceProtocol 0 iInterface 0 AudioControl Interface Descriptor: bLength 9 bDescriptorType36 bDescriptorSubtype 1 (HEADER) bcdADC 1.00 wTotalLength 42 bInCollection 1 baInterfaceNr( 0) 2 AudioControl Interface Descriptor: bLength12 bDescriptorType36 bDescriptorSubtype 2 (INPUT_TERMINAL) bTerminalID 1 wTerminalType 0x0201 Microphone bAssocTerminal 2 bNrChannels 4 wChannelConfig 0x iChannelNames 0
[gentoo-user] Webcam ? Help me please...
Hi, To watch some birds I have bought a Logitech QuickCam Pro For Notebooks WebCam. I have configurted the kernel for UVC and compiled a driver as modulem which is stated to support my Cam. ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I found zoneminder which is masked due to security issues and which neeed A LOT more things to support features I wont use (PHP, MySQL...). I qsearched for web cam (not match) and other keywords without success. A hint, what to install would be very helpful and heartly welcome! Have a nice weekend! Kind regards, Meino Cramer -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] Webcam ? Help me please...
2009/7/25 meino.cra...@gmx.de: ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I use cheese, which let you take photos and videos. Under the menu Edit/Preferences I can customize the resolution. Manuel Fiorelli
Re: [gentoo-user] Webcam ? Help me please...
meino.cra...@gmx.de ha scritto: Hi, To watch some birds I have bought a Logitech QuickCam Pro For Notebooks WebCam. I have configurted the kernel for UVC and compiled a driver as modulem which is stated to support my Cam. ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I found zoneminder which is masked due to security issues and which neeed A LOT more things to support features I wont use (PHP, MySQL...). I qsearched for web cam (not match) and other keywords without success. camorama ?
Re: [gentoo-user] Webcam ? Help me please...
Manuel Fiorelli manuel.fiore...@gmail.com [09-07-25 12:16]: 2009/7/25 meino.cra...@gmx.de: ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I use cheese, which let you take photos and videos. Under the menu Edit/Preferences I can customize the resolution. Manuel Fiorelli Hi Manuel. sounds good! Thanks for the hint. But, I installed cheese without complains of the compile process. But starting cheese produces: solfire:/home/mccramercheese cheese: error while loading shared libraries: libplc4.so.7: cannot open shared object file: No such file or directory And ldd /usr/bin/cheese produces beside other things: libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found Further investigations shows, that instead the *7* version of that libs the *8* versions are installed on my box? qsearch libplc or qsearch plc doesnt produce anything meaningful. /usr/lib/nspr, where libplc is located, is in /etc/ld.so.conf. Lost? mcc -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] Webcam ? Help me please...
bn brullonu...@gmail.com [09-07-25 12:21]: meino.cra...@gmx.de ha scritto: Hi, To watch some birds I have bought a Logitech QuickCam Pro For Notebooks WebCam. I have configurted the kernel for UVC and compiled a driver as modulem which is stated to support my Cam. ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I found zoneminder which is masked due to security issues and which neeed A LOT more things to support features I wont use (PHP, MySQL...). I qsearched for web cam (not match) and other keywords without success. camorama ? Hi, Thank you for the hint. The programm says unable to capture image. Executing it as root does the same. ffmpeg could capture a video stream from my webcam, so the cam is not the problem... Lost? -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] Webcam ? Help me please...
On Samstag 25 Juli 2009, meino.cra...@gmx.de wrote: Manuel Fiorelli manuel.fiore...@gmail.com [09-07-25 12:16]: 2009/7/25 meino.cra...@gmx.de: ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I use cheese, which let you take photos and videos. Under the menu Edit/Preferences I can customize the resolution. Manuel Fiorelli Hi Manuel. sounds good! Thanks for the hint. But, I installed cheese without complains of the compile process. But starting cheese produces: solfire:/home/mccramercheese cheese: error while loading shared libraries: libplc4.so.7: cannot open shared object file: No such file or directory And ldd /usr/bin/cheese produces beside other things: libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found Further investigations shows, that instead the *7* version of that libs the *8* versions are installed on my box? qsearch libplc or qsearch plc doesnt produce anything meaningful. /usr/lib/nspr, where libplc is located, is in /etc/ld.so.conf. Lost? mcc you updated firefox and xulrunner, correct? rebuild nss and nspr ;)
Re: [gentoo-user] Webcam ? Help me please...
2009/7/25 meino.cra...@gmx.de: I installed cheese without complains of the compile process. But starting cheese produces: solfire:/home/mccramercheese cheese: error while loading shared libraries: libplc4.so.7: cannot open shared object file: No such file or directory And ldd /usr/bin/cheese produces beside other things: libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found Further investigations shows, that instead the *7* version of that libs the *8* versions are installed on my box? It's really strangemay be that revdep-rebuild can help you. http://www.gentoo.org/doc/en/gentoolkit.xml#doc_chap4 Try to execute it in pretend mode (with the flag --pretend) and see if it discovers some broken packages. Manuel Fiorelli
Re: [gentoo-user] Webcam ? Help me please...
Manuel Fiorelli manuel.fiore...@gmail.com [09-07-25 13:51]: 2009/7/25 meino.cra...@gmx.de: I installed cheese without complains of the compile process. But starting cheese produces: solfire:/home/mccramercheese cheese: error while loading shared libraries: libplc4.so.7: cannot open shared object file: No such file or directory And ldd /usr/bin/cheese produces beside other things: libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found libplc4.so.7 = not found libplds4.so.7 = not found libnspr4.so.7 = not found Further investigations shows, that instead the *7* version of that libs the *8* versions are installed on my box? It's really strangemay be that revdep-rebuild can help you. http://www.gentoo.org/doc/en/gentoolkit.xml#doc_chap4 Try to execute it in pretend mode (with the flag --pretend) and see if it discovers some broken packages. Manuel Fiorelli Hi, ok, revdep-rebuild and re-emerge of nss/nspr does the thing...now I can see through my webcam. BUT: Max. resolution is 176x144 in vido mode (nothing more offered via preferences) Is it all I can exspect from a Logitech Quickcam Pro for Notebooks? Furthermore: The autofocus seems to be off - the image is blurry... Is there any other trick I should know? Thanks again for any help in advance! Meino -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] Webcam ? Help me please...
meino.cra...@gmx.de ha scritto: Thank you for the hint. The programm says unable to capture image. Executing it as root does the same. Very strange. ffmpeg could capture a video stream from my webcam, so the cam is not the problem... Have you tried good old mplayer ? It can play the stream from your webcam just fine and it's very configurable. See: http://brainwagon.org/2007/01/16/viewing-a-v4l-webcam-with-mplayer/ (first google hit) m.
Re: [gentoo-user] Webcam ? Help me please...
bn brullonu...@gmail.com [09-07-25 15:46]: meino.cra...@gmx.de ha scritto: Thank you for the hint. The programm says unable to capture image. Executing it as root does the same. Very strange. ffmpeg could capture a video stream from my webcam, so the cam is not the problem... Have you tried good old mplayer ? It can play the stream from your webcam just fine and it's very configurable. See: http://brainwagon.org/2007/01/16/viewing-a-v4l-webcam-with-mplayer/ (first google hit) m. H...tried that, but cannot tweak the resolution above 176x144... That is VERY small... The resolution given in the commandline is for the output device (software scaled)... Nay idea how to do this with mplayer? M. (also :) -- Please don't send me any Word- or Powerpoint-Attachments unless it's absolutely neccessary. - Send simply Text. See http://www.gnu.org/philosophy/no-word-attachments.html In a world without fences and walls nobody needs gates and windows.
Re: [gentoo-user] Webcam ? Help me please...
Hi, To watch some birds I have bought a Logitech QuickCam Pro For Notebooks WebCam. I have configurted the kernel for UVC and compiled a driver as modulem which is stated to support my Cam. ...the only thing I need is an application to make the video visible and which allows me to save the video and an application to control the cameras features. I found zoneminder which is masked due to security issues and which neeed A LOT more things to support features I wont use (PHP, MySQL...). I qsearched for web cam (not match) and other keywords without success. A hint, what to install would be very helpful and heartly welcome! Have a nice weekend! Kind regards, Meino Cramer Hi 2 more to try guvcview luvcview both work with uvc web cams and can take snapshots and video Also, motion motiontrack are motion detection and recording apps Al
[gentoo-user] webcam
Hi It's nearly there I get 'lsmod Module Size Used by uvcvideo 40580 0 compat_ioctl32 1536 1 uvcvideo videodev 27520 1 uvcvideo v4l1_compat12036 2 uvcvideo,videodev extreme video # lsusb Bus 005 Device 001: ID 1d6b:0001 Bus 001 Device 006: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External) Bus 001 Device 005: ID 13fd:1650 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 046d:08ce Logitech, Inc. QuickCam Pro 5000 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 006 Device 001: ID 1d6b:0001 Bus 008 Device 001: ID 1d6b:0001 Bus 004 Device 002: ID 046d:0a02 Logitech, Inc. Bus 004 Device 001: ID 1d6b:0001 Bus 007 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0001' the camera is detected. But, lsmod doesn't see my quickcam as I think it should. Can anyone help pls? g -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
Hi, That doesn't sound too bad. How you test the cam? cu Max On Sat, 2008-05-03 at 11:43 +0100, Gavin Seddon wrote: Hi It's nearly there I get 'lsmod Module Size Used by uvcvideo 40580 0 compat_ioctl32 1536 1 uvcvideo videodev 27520 1 uvcvideo v4l1_compat12036 2 uvcvideo,videodev extreme video # lsusb Bus 005 Device 001: ID 1d6b:0001 Bus 001 Device 006: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External) Bus 001 Device 005: ID 13fd:1650 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 046d:08ce Logitech, Inc. QuickCam Pro 5000 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 006 Device 001: ID 1d6b:0001 Bus 008 Device 001: ID 1d6b:0001 Bus 004 Device 002: ID 046d:0a02 Logitech, Inc. Bus 004 Device 001: ID 1d6b:0001 Bus 007 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0001' the camera is detected. But, lsmod doesn't see my quickcam as I think it should. Can anyone help pls? g -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
Max wrote: Hi, That doesn't sound too bad. How you test the cam? cu Max On Sat, 2008-05-03 at 11:43 +0100, Gavin Seddon wrote: Hi It's nearly there I get 'lsmod Module Size Used by uvcvideo 40580 0 compat_ioctl32 1536 1 uvcvideo videodev 27520 1 uvcvideo v4l1_compat12036 2 uvcvideo,videodev extreme video # lsusb Bus 005 Device 001: ID 1d6b:0001 Bus 001 Device 006: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External) Bus 001 Device 005: ID 13fd:1650 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 046d:08ce Logitech, Inc. QuickCam Pro 5000 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 006 Device 001: ID 1d6b:0001 Bus 008 Device 001: ID 1d6b:0001 Bus 004 Device 002: ID 046d:0a02 Logitech, Inc. Bus 004 Device 001: ID 1d6b:0001 Bus 007 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0001' the camera is detected. But, lsmod doesn't see my quickcam as I think it should. Can anyone help pls? g Hi The cam's not lit and gqcam starts then crashes. Cheers. g -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
Gavin Seddon wrote: Max wrote: Hi, That doesn't sound too bad. How you test the cam? cu Max On Sat, 2008-05-03 at 11:43 +0100, Gavin Seddon wrote: Hi It's nearly there I get 'lsmod Module Size Used by uvcvideo 40580 0 compat_ioctl32 1536 1 uvcvideo videodev 27520 1 uvcvideo v4l1_compat12036 2 uvcvideo,videodev extreme video # lsusb Bus 005 Device 001: ID 1d6b:0001 Bus 001 Device 006: ID 058f:6362 Alcor Micro Corp. Hi-Speed 21-in-1 Flash Card Reader/Writer (Internal/External) Bus 001 Device 005: ID 13fd:1650 Bus 001 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 046d:08ce Logitech, Inc. QuickCam Pro 5000 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 006 Device 001: ID 1d6b:0001 Bus 008 Device 001: ID 1d6b:0001 Bus 004 Device 002: ID 046d:0a02 Logitech, Inc. Bus 004 Device 001: ID 1d6b:0001 Bus 007 Device 001: ID 1d6b:0001 Bus 003 Device 001: ID 1d6b:0001' the camera is detected. But, lsmod doesn't see my quickcam as I think it should. Can anyone help pls? g Hi The cam's not lit and gqcam starts then crashes. Cheers. g To test I try to use gqcam but it starts then crashes with 'qcam Error reading image... ioctl (VIDIOCSPICT): Invalid argument Error reading image... Segmentation fault ' thanks g -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] webcam
Hi Sorry about this. lsusb sees my logptech 5000 webcam. I've configured according to http://gentoo-wiki.com/HOWTO_Install_a_webcam but there's no light on. Can anypne help pls? g -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
Hi, If you mean a logitech 5000, this page may helps you: http://linux-uvc.berlios.de/ I don't know the cam, but had no problem with old quickcams or spca5xx chipset based ones on gentoo. Just make sure you have V4L enables in your kernel config. cu Max On Fri, 2008-05-02 at 16:03 +0100, Gavin Seddon wrote: Hi Sorry about this. lsusb sees my logptech 5000 webcam. I've configured according to http://gentoo-wiki.com/HOWTO_Install_a_webcam but there's no light on. Can anypne help pls? g -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
Gavin Seddon wrote: b.n. wrote: Gavin Seddon ha scritto: Hi, Can anyone recommend a easy-to-install and decent wc for conferencing? Depends on what you mean with decent. I have a cheap Logitech and it works m. Logitech Quickcam Pro 5000 Webcam looks good? For what it's worth I have a Quickcam Pro 9000. It's the best I've seen by miles. Works well under the new uvc framework as well. I use it with AMSN, and it didn't require any hassle - emerge driver, modprobe, go. Paul -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] webcam
Hi, Can anyone recommend a easy-to-install and decent wc for conferencing? Gav -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
Gavin Seddon ha scritto: Hi, Can anyone recommend a easy-to-install and decent wc for conferencing? Depends on what you mean with decent. I have a cheap Logitech and it works fine. m. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
b.n. wrote: Gavin Seddon ha scritto: Hi, Can anyone recommend a easy-to-install and decent wc for conferencing? Depends on what you mean with decent. I have a cheap Logitech and it works fine. m. Decent, images clear and sound good. Looks nice on top of monitor. Easy to install! -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] webcam
b.n. wrote: Gavin Seddon ha scritto: Hi, Can anyone recommend a easy-to-install and decent wc for conferencing? Depends on what you mean with decent. I have a cheap Logitech and it works m. Logitech Quickcam Pro 5000 Webcam looks good? -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Webcam recommendation
On Saturday 26 January 2008 09:28:23 pm forgottenwizard wrote: On 16:13 Sat 26 Jan , Mike Diehl wrote: Hi all. I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. Any recommendations? TIA, -- Mike Diehl -- gentoo-user@lists.gentoo.org mailing list I think the Logitech Quickcam is the general answer to that question. I think the cheap one is around 30-40US, though. Yup, works like a champ. Had to go get the driver, but once I did, it just stood up. And it doesn't look TOO bad, either. It's not TV quality, but it is good enough. Thanx, -- Mike Diehl -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Webcam recommendation
On Tue, 2008-01-29 at 21:52 -0700, Mike Diehl wrote: On Saturday 26 January 2008 09:28:23 pm forgottenwizard wrote: On 16:13 Sat 26 Jan , Mike Diehl wrote: I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. I think the Logitech Quickcam is the general answer to that question. I think the cheap one is around 30-40US, though. Yup, works like a champ. Had to go get the driver, but once I did, it just stood up. And it doesn't look TOO bad, either. It's not TV quality, but it is good enough. I just gotten a very inexpensive webcam to work. It's a no-brand USD15 webcam using the gspcav1 driver. I think this is the one. http://farm3.static.flickr.com/2023/2182061881_b3f5174065_o.jpg
Re: [gentoo-user] Webcam recommendation
On Jan 30, 2008 2:28 AM, Ow Mun Heng [EMAIL PROTECTED] wrote: On Tue, 2008-01-29 at 21:52 -0700, Mike Diehl wrote: On Saturday 26 January 2008 09:28:23 pm forgottenwizard wrote: On 16:13 Sat 26 Jan , Mike Diehl wrote: I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. I think the Logitech Quickcam is the general answer to that question. I think the cheap one is around 30-40US, though. Yup, works like a champ. Had to go get the driver, but once I did, it just stood up. And it doesn't look TOO bad, either. It's not TV quality, but it is good enough. I just gotten a very inexpensive webcam to work. It's a no-brand USD15 webcam using the gspcav1 driver. I think this is the one. http://farm3.static.flickr.com/2023/2182061881_b3f5174065_o.jpg Since you guys are talking about webcams on Linux, I'd like to know if anyone has ever tried the Creative Live! Cam Voice on Linux, or at least knows if it's possible to use it. I'd like to be able to use it at least on Linux, since it doesn't have stable drivers for Win Vista and I'm not willing to install the beta version yet (too much data I can't afford to lose right now). Since I bought my new laptop, my cam is sitting in my desk drawer, and it was way too expensive to remain this way. Thanks! Naiani -- gentoo-user@lists.gentoo.org mailing list
[gentoo-user] Webcam recommendation
Hi all. I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. Any recommendations? TIA, -- Mike Diehl -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Webcam recommendation
On 16:13 Sat 26 Jan , Mike Diehl wrote: Hi all. I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. Any recommendations? TIA, -- Mike Diehl -- gentoo-user@lists.gentoo.org mailing list I think the Logitech Quickcam is the general answer to that question. I think the cheap one is around 30-40US, though. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Webcam recommendation
On Saturday 26 January 2008 09:28:23 pm forgottenwizard wrote: On 16:13 Sat 26 Jan , Mike Diehl wrote: Hi all. I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. Any recommendations? TIA, -- Mike Diehl I think the Logitech Quickcam is the general answer to that question. I think the cheap one is around 30-40US, though. Cool. I'm anxious to try it out. Thanx again. -- Mike Diehl -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Webcam recommendation
Mike Diehl ha scritto: I'm looking for an inexpensive USB webcam that works with both Linux and Windoze. Something that I can pick up at Walmart or Circuit City would be best. Any recommendations? TIA, -- Mike Diehl I think the Logitech Quickcam is the general answer to that question. I think the cheap one is around 30-40US, though. I have a Logitech Quickcam and it is fully supported. I spent 20 € for it. I use it routinely with aMSN. Very cheap stuff however -the iSight on my Macbook Pro beats it hands down, however it is not so fully supported :( . m. -- gentoo-user@lists.gentoo.org mailing list
Re: [gentoo-user] Webcam on Pavilion Dv1000
CESAR GAVIDIA wrote: Greetings brothers, I have a laptop Hp Pavilion dv1000, this brings incorporated a webcam and a microphone, which have been able to fail to utilize. So what is the error you are encountering? -- Randy Barlow http://electronsweatshop.com But you are a chosen race, a royal priesthood, a holy nation, a people for his own possession, that you may proclaim the excellencies of him who called you out of darkness into his marvelous light. Once you were not a people, but now you are God's people; once you had not received mercy, but now you have received mercy. ~1 Peter 2:9-10 -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Webcam on Pavilion Dv1000
On 9/5/07, CESAR GAVIDIA [EMAIL PROTECTED] wrote: Greetings brothers, I have a laptop Hp Pavilion dv1000, this brings incorporated a webcam and a microphone, which have been able to fail to utilize. Sam Revich had a driver for the webcam on my HP dv9000t, which allowed me to get images. Something in the control data is different from the standard model however, so I can't really do anything with it without crashing the device, and I haven't been a good debugging partner. I'd be happy to use the thing but I don't have time to figure it out right now. I don't know if my device is the same as yours -- Sam has a listing of the USB device numbers on his blog, so you can see if his driver would work. If you have problems using it, he may be willing to work with you if you have time to help him with the data he needs for debugging. Here's the blog: http://lsb.blogdns.net/ry5u870/ -- [EMAIL PROTECTED] mailing list
[gentoo-user] Webcam on Pavilion Dv1000
Greetings brothers, I have a laptop Hp Pavilion dv1000, this brings incorporated a webcam and a microphone, which have been able to fail to utilize. If alquien can help would be thanked me it.. Cordial greetings... Sorru by my english :-) -- [EMAIL PROTECTED] mailing list
[gentoo-user] webcam problem
I use for my webcam the latest spca5xx driver. everything work well until i want to test my webcam. When i try this thing mplayer tv:// -tv driver=v4l:width=352:height=288:outfmt=rgb24:device=/dev/video0:noaudio -flip 91 audio 208 video codecs Playing tv://. Selected driver: v4l name: Video 4 Linux input author: Alex Beregszaszi comment: under development unable to open '/dev/video0': No space left on device Exiting... (End of file) I have connected several devices on the same root hub a mouse,printer and webcam. if i unplug the mouse and the printer and i try it my webcam work very well. I have GA-K8N Ultra 9 motherboard with Nforce4 Ultra Chipset. My kernel config is: # USB devices # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_USX2Y is not set # USB support CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set # Miscellaneous USB options CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # USB Host Controller Drivers CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # USB Device Class drivers # CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # may also be needed; see USB_STORAGE Help for more information CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_LIBUSUAL is not set # USB Input Devices CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDINPUT_POWERBOOK is not set # CONFIG_USB_HIDDEV is not set # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_MTOUCH is not set # CONFIG_USB_ITMTOUCH is not set # CONFIG_USB_EGALAX is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set # USB Imaging devices # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # USB Multimedia devices # CONFIG_USB_DABUSB is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_DSBR is not set # CONFIG_USB_ET61X251 is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_USB_STV680 is not set # CONFIG_USB_PWC is not set # USB Network Adapters # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # USB port drivers # USB Serial Converter support # CONFIG_USB_SERIAL is not set # USB Miscellaneous drivers # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set # USB DSL modem support # USB Gadget Support # CONFIG_USB_GADGET is not set Does somebody experience that error?if yes that can i do to make my webcam work -- gentoo-user@gentoo.org mailing list