Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
On Tue, 2006-01-03 at 06:53 +, Rumen Yotov wrote: On (02/01/06 15:29), Michael Sullivan wrote: On Mon, 2006-01-02 at 21:55 +, Rumen Yotov wrote: Hi, On (02/01/06 13:21), Michael Sullivan wrote: On Mon, 2006-01-02 at 21:01 +, Rumen Yotov wrote: Hi, On (02/01/06 12:30), Michael Sullivan wrote: On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: ...SKIP... ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. ...SKIP... 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller ==^ camille ~ # lspci | grep -i video 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) ...SKIP... So seems you have an Intel-910/915 video controler (i don't have Intel). So switch CONFIG_AGP=ON and afterwards enable Intel-910 ot similar video controler. Could do a: genkernel --menuconfig --install all - this will use your old config display a text-driven menu for kernel config and after exiting will compileinstall (in /boot) your new kernelmodules. If you wish backup the old one before that. HTH.Rumen Earlier this afternoon I compiled and booted a new kernel with CONFIG_AGP=y, but now when I run genkernel --menuconfig all I can't find anything that even hints at being Intel-=910 or video controller. Where would it be at? -- gentoo-user@gentoo.org mailing list Hi, The chipset support is right below CONFIG_AGP setting. ... Character devices --- /dev/agpgart (AGP support) Inter chipset ... ... There's only one option for Intel chipset support (from 810-I915). If made as modules put the appropriate entries in /etc/modules.autoload.d/kernel-2.6 PS:could check the genkernel guide too. HTH.Rumen The only entry for Intel immediately below /dev/agpgart on mine is: Intel 440LX/BX/GX, I8xx and E7x05 chipset support. Is this correct? It doesn't sound like what you've described... -- gentoo-user@gentoo.org mailing list
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: The reason it was giving me the error was because mythbackend was shutting down. I ran mythbackend in a screen, detached the screen and ran mythfrontend. I did this twice. Both times once mythfrontend loaded I selected the Watch Live TV option and it showed me about a second and a half of live TV and then froze. Both times I had to Cntrl +Alt+Backspace to get out of it. I have a 1.33GHz P4 processor, so that shouldn't be the problem. Amazingly mythbackend is still running in the screen. Here's the output so far: It seems that something is not stable with the X server or with the card drivers. For now, perhaps forget MythTV and just see if you can get a stable input running with something like tvtime - [ N] media-tv/tvtime (0.9.12): High quality television application for use with video capture cards. Perhaps some tweaking to /etc/X11/xorg.conf is needed or different params to the video card driver to change some options. If the system won't play live tv, without issue, messing with MythTV won't fix it. There are some suggestions here - http://gentoo-wiki.com/HOWTO_Setup_MythTV#Video Bob I looked at the link you sent me. Most of it didn't make sense to me. One part that did make sense was the http://gentoo-wiki.com/HOWTO_Setup_MythTV#X_Setup I created a test user (to avoid screwing up my personal account) and copied to listed .xinitrc and .xsession information into testuser's counterparts of those files. I started kdm and attempted to log in to a Custom session with testuser. It kept spitting me back out at the login screen. I asked to go back to the console and looked at /var/log/kdm.log. There's a bunch of this: X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.14-gentoo-r5 i686 [ELF] Current Operating System: Linux camille 2.6.14-gentoo-r5 #1 SMP Sun Jan 1 22:29:29 CST 2006 i686 Build Date: 26 December 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon Jan 2 10:58:02 2006 (==) Using config file: /etc/X11/xorg.conf (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) Holly said something about my kernel not being set up correctly when I was having this problem with gdm, but gdm works just fine. Just kdm and the custom session. How do I compile apg into my kernel to fix this? Here's my kernel config, created by genkernel: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-gentoo-r5 # Sun Jan 1 22:22:04 2006 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set CONFIG_MWAVE=m CONFIG_RAW_DRIVER=m # CONFIG_HPET is not set CONFIG_MAX_RAW_DEVS=256 # CONFIG_HANGCHECK_TIMER is not set ...SKIP... -- gentoo-user@gentoo.org mailing list Assume you using genkernel without any modifications to kernel config? Got interested why this doesn't work with KDM so here it is: ...BEGIN... #emerge kdm -pv These are the packages that I would merge, in order: Calculating dependencies ...done! [ebuild N] kde-base/kdebase-pam-6 0 kB [ebuild N] kde-base/khotkeys-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 22,688 kB [ebuild N] kde-base/libkonq-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 0 kB [ebuild N] kde-base/kdebase-data-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 0 kB [ebuild N] kde-base/kicker-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 0 kB [ebuild N] kde-base/kdesu-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 0 kB [ebuild N] kde-base/khelpcenter-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 0 kB [ebuild N] kde-base/kcminit-3.5.0 USE=kdexdeltas -arts -debug -kdeenablefinal -xinerama 0 kB [ebuild N] kde-base/kcontrol-3.5.0 USE=kdexdeltas opengl ssl -arts -debug -ieee1394 -kdeenablefinal -logitech-mouse -xinerama 0 kB [ebuild N] kde-base/kdm-3.5.0 USE=kdexdeltas pam
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: The reason it was giving me the error was because mythbackend was shutting down. I ran mythbackend in a screen, detached the screen and ran mythfrontend. I did this twice. Both times once mythfrontend loaded I selected the Watch Live TV option and it showed me about a second and a half of live TV and then froze. Both times I had to Cntrl +Alt+Backspace to get out of it. I have a 1.33GHz P4 processor, so that shouldn't be the problem. Amazingly mythbackend is still running in the screen. Here's the output so far: It seems that something is not stable with the X server or with the card drivers. For now, perhaps forget MythTV and just see if you can get a stable input running with something like tvtime - [ N] media-tv/tvtime (0.9.12): High quality television application for use with video capture cards. Perhaps some tweaking to /etc/X11/xorg.conf is needed or different params to the video card driver to change some options. If the system won't play live tv, without issue, messing with MythTV won't fix it. There are some suggestions here - http://gentoo-wiki.com/HOWTO_Setup_MythTV#Video Bob I looked at the link you sent me. Most of it didn't make sense to me. One part that did make sense was the http://gentoo-wiki.com/HOWTO_Setup_MythTV#X_Setup I created a test user (to avoid screwing up my personal account) and copied to listed .xinitrc and .xsession information into testuser's counterparts of those files. I started kdm and attempted to log in to a Custom session with testuser. It kept spitting me back out at the login screen. I asked to go back to the console and looked at /var/log/kdm.log. There's a bunch of this: X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.6.14-gentoo-r5 i686 [ELF] Current Operating System: Linux camille 2.6.14-gentoo-r5 #1 SMP Sun Jan 1 22:29:29 CST 2006 i686 Build Date: 26 December 2005 Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Mon Jan 2 10:58:02 2006 (==) Using config file: /etc/X11/xorg.conf (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) Holly said something about my kernel not being set up correctly when I was having this problem with gdm, but gdm works just fine. Just kdm and the custom session. How do I compile apg into my kernel to fix this? Here's my kernel config, created by genkernel: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-gentoo-r5 # Sun Jan 1 22:22:04 2006 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
Hi, On (02/01/06 12:30), Michael Sullivan wrote: On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: ...SKIP... (==) Log file: /var/log/Xorg.0.log, Time: Mon Jan 2 10:58:02 2006 (==) Using config file: /etc/X11/xorg.conf (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) Holly said something about my kernel not being set up correctly when I was having this problem with gdm, but gdm works just fine. Just kdm and the custom session. How do I compile apg into my kernel to fix this? Here's my kernel config, created by genkernel: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-gentoo-r5 # Sun Jan 1 22:22:04 2006 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list Use lspci or lshw (emerge if not available), use -v -vv -vvv for a more verbose output. Tuning your kernel *requires* you to at least know what your basic hardware is. Manual ? Try: #lspci | grep -i VGA or lspci | grep -i video Or post the output here. PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) Rumen pgpT8fBQNaZfZ.pgp Description: PGP signature
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
Rumen Yotov wrote: How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list Use lspci or lshw (emerge if not available), use -v -vv -vvv for a more verbose output. Tuning your kernel *requires* you to at least know what your basic hardware is. Manual ? Try: #lspci | grep -i VGA or lspci | grep -i video Or post the output here. PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) Rumen As for your cpu type you can get that info with: cat /proc/cpuinfo Cheers. -- Ted Ozolins(VE7TVO) Westbank, B. C -- gentoo-user@gentoo.org mailing list
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
On Mon, 2006-01-02 at 11:12 -0800, Ted Ozolins wrote: Rumen Yotov wrote: How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list Use lspci or lshw (emerge if not available), use -v -vv -vvv for a more verbose output. Tuning your kernel *requires* you to at least know what your basic hardware is. Manual ? Try: #lspci | grep -i VGA or lspci | grep -i video Or post the output here. PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) Rumen As for your cpu type you can get that info with: cat /proc/cpuinfo Cheers. -- Ted Ozolins(VE7TVO) Westbank, B. C camille ~ # cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Celeron(R) CPU 2.66GHz stepping: 1 cpu MHz : 2667.191 cache size : 256 KB fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx pni monitor ds_cpl tm2 cid xtpr bogomips: 5342.53 I guess it isn't a Pentium IV... -- gentoo-user@gentoo.org mailing list
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
On Mon, 2006-01-02 at 21:01 +, Rumen Yotov wrote: Hi, On (02/01/06 12:30), Michael Sullivan wrote: On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: ...SKIP... (==) Log file: /var/log/Xorg.0.log, Time: Mon Jan 2 10:58:02 2006 (==) Using config file: /etc/X11/xorg.conf (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) Holly said something about my kernel not being set up correctly when I was having this problem with gdm, but gdm works just fine. Just kdm and the custom session. How do I compile apg into my kernel to fix this? Here's my kernel config, created by genkernel: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-gentoo-r5 # Sun Jan 1 22:22:04 2006 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list Use lspci or lshw (emerge if not available), use -v -vv -vvv for a more verbose output. Tuning your kernel *requires* you to at least know what your basic hardware is. Manual ? Try: #lspci | grep -i VGA or lspci | grep -i video Or post the output here. PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) Rumen Here's the lscpi output: camille ~ # lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller camille ~ # lspci | grep -i video 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Here's my full lspci output; I don't know if you need it: camille ~ # lspci 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 05:01.0 Communication controller: U.S. Robotics Unknown device 2f00 (rev 01) 05:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 01) -- gentoo-user@gentoo.org mailing list
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
Hi, On (02/01/06 13:21), Michael Sullivan wrote: On Mon, 2006-01-02 at 21:01 +, Rumen Yotov wrote: Hi, On (02/01/06 12:30), Michael Sullivan wrote: On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: ...SKIP... (==) Log file: /var/log/Xorg.0.log, Time: Mon Jan 2 10:58:02 2006 (==) Using config file: /etc/X11/xorg.conf (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) Holly said something about my kernel not being set up correctly when I was having this problem with gdm, but gdm works just fine. Just kdm and the custom session. How do I compile apg into my kernel to fix this? Here's my kernel config, created by genkernel: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-gentoo-r5 # Sun Jan 1 22:22:04 2006 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list Use lspci or lshw (emerge if not available), use -v -vv -vvv for a more verbose output. Tuning your kernel *requires* you to at least know what your basic hardware is. Manual ? Try: #lspci | grep -i VGA or lspci | grep -i video Or post the output here. PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) Rumen Here's the lscpi output: camille ~ # lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller ==^ camille ~ # lspci | grep -i video 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Here's my full lspci output; I don't know if you need it: camille ~ # lspci 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 05:01.0 Communication controller: U.S. Robotics Unknown device 2f00 (rev 01) 05:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 01) -- gentoo-user@gentoo.org mailing list So seems you have an Intel-910/915 video controler (i don't have Intel). So switch CONFIG_AGP=ON and afterwards enable Intel-910 ot similar video controler. Could do a: genkernel --menuconfig --install all - this will use your old config display a text-driven menu for kernel config and after exiting will compileinstall (in /boot) your new kernelmodules. If you wish
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
On Mon, 2006-01-02 at 21:55 +, Rumen Yotov wrote: Hi, On (02/01/06 13:21), Michael Sullivan wrote: On Mon, 2006-01-02 at 21:01 +, Rumen Yotov wrote: Hi, On (02/01/06 12:30), Michael Sullivan wrote: On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: ...SKIP... (==) Log file: /var/log/Xorg.0.log, Time: Mon Jan 2 10:58:02 2006 (==) Using config file: /etc/X11/xorg.conf (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) Holly said something about my kernel not being set up correctly when I was having this problem with gdm, but gdm works just fine. Just kdm and the custom session. How do I compile apg into my kernel to fix this? Here's my kernel config, created by genkernel: # # Automatically generated make config: don't edit # Linux kernel version: 2.6.14-gentoo-r5 # Sun Jan 1 22:22:04 2006 # CONFIG_X86=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. How do I find out what the entry for my motherboard chips (-set I assume) is? Is there a software way to determine this? All I know is that it's SUPPOSED to be a Pentium IV, but it might not be... -- gentoo-user@gentoo.org mailing list Use lspci or lshw (emerge if not available), use -v -vv -vvv for a more verbose output. Tuning your kernel *requires* you to at least know what your basic hardware is. Manual ? Try: #lspci | grep -i VGA or lspci | grep -i video Or post the output here. PS:could also be done using a LiveCD (gentoo-install-CD, Knoppix etc.) Rumen Here's the lscpi output: camille ~ # lspci | grep -i VGA 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller ==^ camille ~ # lspci | grep -i video 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) Here's my full lspci output; I don't know if you need it: camille ~ # lspci 00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 4 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) 05:01.0 Communication controller: U.S. Robotics Unknown device 2f00 (rev 01) 05:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller (rev 01) -- gentoo-user@gentoo.org mailing list So seems you have an Intel-910/915 video controler (i don't have Intel). So switch CONFIG_AGP=ON and afterwards enable Intel-910 ot similar video controler. Could do a:
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
Michael Sullivan wrote: model : 4 model name : Intel(R) Celeron(R) CPU 2.66GHz I guess it isn't a Pentium IV... As you can see from the model, its a p4 -- Ted Ozolins(VE7TVO) Westbank, B. C -- gentoo-user@gentoo.org mailing list
Re: GARTInit: WAS (Re: [gentoo-user] Re: OT - Need MythTV setup help (resend))
On (02/01/06 15:29), Michael Sullivan wrote: On Mon, 2006-01-02 at 21:55 +, Rumen Yotov wrote: Hi, On (02/01/06 13:21), Michael Sullivan wrote: On Mon, 2006-01-02 at 21:01 +, Rumen Yotov wrote: Hi, On (02/01/06 12:30), Michael Sullivan wrote: On Mon, 2006-01-02 at 20:17 +, Rumen Yotov wrote: Hi, On (02/01/06 11:21), Michael Sullivan wrote: On Sun, 2006-01-01 at 17:47 -0800, Bob Sanders wrote: On Sun, 01 Jan 2006 16:57:32 -0600 Michael Sullivan [EMAIL PROTECTED] wrote: ...SKIP... ...SKIP... # # Ftape, the floppy tape device driver # # CONFIG_AGP is not set ==^ switch this to ON plus the entry for your motherboard chips support. ...SKIP... 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller ==^ camille ~ # lspci | grep -i video 05:00.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) ...SKIP... So seems you have an Intel-910/915 video controler (i don't have Intel). So switch CONFIG_AGP=ON and afterwards enable Intel-910 ot similar video controler. Could do a: genkernel --menuconfig --install all - this will use your old config display a text-driven menu for kernel config and after exiting will compileinstall (in /boot) your new kernelmodules. If you wish backup the old one before that. HTH.Rumen Earlier this afternoon I compiled and booted a new kernel with CONFIG_AGP=y, but now when I run genkernel --menuconfig all I can't find anything that even hints at being Intel-=910 or video controller. Where would it be at? -- gentoo-user@gentoo.org mailing list Hi, The chipset support is right below CONFIG_AGP setting. ... Character devices --- /dev/agpgart (AGP support) Inter chipset ... ... There's only one option for Intel chipset support (from 810-I915). If made as modules put the appropriate entries in /etc/modules.autoload.d/kernel-2.6 PS:could check the genkernel guide too. HTH.Rumen pgp4ZaiwB6puB.pgp Description: PGP signature
