Re: [Geotools-devel] [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow
We discussed pushing both meetings ahead one hour in today's meeting and everyone was in favour. For those who weren't present: *Any objections to moving all future PMC meetings to 17:00 UTC?*: https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2019=01=08=17=00=0=1 <https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2018=12=11=16=00=0=1> Cheers, Torben On Tue, Dec 11, 2018 at 7:56 AM Torben Barsballe < tbarsba...@boundlessgeo.com> wrote: > I'd say 16:00, to match the other meeting (Although 16:30 would be fine by > me too). > > Torben > > On Tue, Dec 11, 2018 at 12:45 AM Ian Turton wrote: > >> Without wishing to confuse matters any more do we mean 16:00 or 16:30 >> (like the other meeting)? >> >> Either way works for me, >> >> Ian >> >> On Mon, 10 Dec 2018 at 23:16, Torben Barsballe < >> tbarsba...@boundlessgeo.com> wrote: >> >>> Sounds good. >>> >>> In that case, lets have tomorrows PMC meeting at 16:00 UTC: >>> >>> >>> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2018=12=11=16=00=0=1 >>> >>> On Mon, Dec 10, 2018 at 3:07 PM wrote: >>> >>>> Even if I could occasionally make 0630 (which will revert to 0530 once >>>> daylight savings ends here), I’m not really awake enough to contribute >>>> much. So optimise for those doing most of the work (hence needing most of >>>> the coordination), and I’ll do what I can to match that if I’m travelling. >>>> >>>> >>>> >>>> Brad >>>> >>>> >>>> >>>> *From:* Andrea Aime >>>> *Sent:* Tuesday, 11 December 2018 4:52 AM >>>> *To:* Torben Barsballe >>>> *Cc:* Geoserver-devel ; >>>> Geotools-Devel list >>>> *Subject:* Re: [Geoserver-devel] Reminder: GeoTools/GeoServer meeting >>>> at 19:30 UTC tomorrow >>>> >>>> >>>> >>>> On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe < >>>> tbarsba...@boundlessgeo.com> wrote: >>>> >>>> >>>> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2016=11=29=19=30=0=1 >>>> >>>> >>>> >>>> (There's been some discussion about moving this meeting to the earlier >>>> 16:00 UTC timeslot, but no real consensus as of yet... assuming this is >>>> unchanged for now). >>>> >>>> >>>> >>>> I'd like to hear from Brad if he's going to participate, given that >>>> 19:30 UTC seems to correspond to 6:30AM his time :-) >>>> >>>> I'm all for keeping the meetings open to as many as possible, as long >>>> as the opportunity is actually used :-) >>>> >>>> >>>> >>>> Cheers >>>> >>>> Andrea >>>> >>>> >>>> >>>> == >>>> >>>> GeoServer Professional Services from the experts! Visit >>>> http://goo.gl/it488V for more information. == Ing. Andrea Aime >>>> @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 >>>> Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 >>>> 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it >>>> --- *Con >>>> riferimento alla normativa sul trattamento dei dati personali (Reg. UE >>>> 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >>>> precisa che ogni circostanza inerente alla presente email (il suo >>>> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è >>>> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il >>>> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra >>>> operazione è illecita. Le sarei comunque grato se potesse darmene notizia. >>>> This email is intended only for the person or entity to which it is >>>> addressed and may contain information that is privileged, confidential or >>>> otherwise protected from disclosure. We remind that - as provided by >>>> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this >>>> e-mail or the information herein by anyone other than the intended >>>> recipient is prohibited. If you have received this email by mistake, please >>>> notify us immediately by telephone or e-mail.* >>>> >>> ___ >>> GeoTools-Devel mailing list >>> GeoTools-Devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/geotools-devel >>> >> >> >> -- >> Ian Turton >> > ___ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
Re: [Geotools-devel] [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow
I'd say 16:00, to match the other meeting (Although 16:30 would be fine by me too). Torben On Tue, Dec 11, 2018 at 12:45 AM Ian Turton wrote: > Without wishing to confuse matters any more do we mean 16:00 or 16:30 > (like the other meeting)? > > Either way works for me, > > Ian > > On Mon, 10 Dec 2018 at 23:16, Torben Barsballe < > tbarsba...@boundlessgeo.com> wrote: > >> Sounds good. >> >> In that case, lets have tomorrows PMC meeting at 16:00 UTC: >> >> >> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2018=12=11=16=00=0=1 >> >> On Mon, Dec 10, 2018 at 3:07 PM wrote: >> >>> Even if I could occasionally make 0630 (which will revert to 0530 once >>> daylight savings ends here), I’m not really awake enough to contribute >>> much. So optimise for those doing most of the work (hence needing most of >>> the coordination), and I’ll do what I can to match that if I’m travelling. >>> >>> >>> >>> Brad >>> >>> >>> >>> *From:* Andrea Aime >>> *Sent:* Tuesday, 11 December 2018 4:52 AM >>> *To:* Torben Barsballe >>> *Cc:* Geoserver-devel ; >>> Geotools-Devel list >>> *Subject:* Re: [Geoserver-devel] Reminder: GeoTools/GeoServer meeting >>> at 19:30 UTC tomorrow >>> >>> >>> >>> On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe < >>> tbarsba...@boundlessgeo.com> wrote: >>> >>> >>> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2016=11=29=19=30=0=1 >>> >>> >>> >>> (There's been some discussion about moving this meeting to the earlier >>> 16:00 UTC timeslot, but no real consensus as of yet... assuming this is >>> unchanged for now). >>> >>> >>> >>> I'd like to hear from Brad if he's going to participate, given that >>> 19:30 UTC seems to correspond to 6:30AM his time :-) >>> >>> I'm all for keeping the meetings open to as many as possible, as long as >>> the opportunity is actually used :-) >>> >>> >>> >>> Cheers >>> >>> Andrea >>> >>> >>> >>> == >>> >>> GeoServer Professional Services from the experts! Visit >>> http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf >>> Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa >>> (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 >>> http://www.geo-solutions.it http://twitter.com/geosolutions_it >>> --- *Con >>> riferimento alla normativa sul trattamento dei dati personali (Reg. UE >>> 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si >>> precisa che ogni circostanza inerente alla presente email (il suo >>> contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è >>> riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il >>> messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra >>> operazione è illecita. Le sarei comunque grato se potesse darmene notizia. >>> This email is intended only for the person or entity to which it is >>> addressed and may contain information that is privileged, confidential or >>> otherwise protected from disclosure. We remind that - as provided by >>> European Regulation 2016/679 “GDPR” - copying, dissemination or use of this >>> e-mail or the information herein by anyone other than the intended >>> recipient is prohibited. If you have received this email by mistake, please >>> notify us immediately by telephone or e-mail.* >>> >> ___ >> GeoTools-Devel mailing list >> GeoTools-Devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/geotools-devel >> > > > -- > Ian Turton > ___ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
Re: [Geotools-devel] [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow
Without wishing to confuse matters any more do we mean 16:00 or 16:30 (like the other meeting)? Either way works for me, Ian On Mon, 10 Dec 2018 at 23:16, Torben Barsballe wrote: > Sounds good. > > In that case, lets have tomorrows PMC meeting at 16:00 UTC: > > > https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2018=12=11=16=00=0=1 > > On Mon, Dec 10, 2018 at 3:07 PM wrote: > >> Even if I could occasionally make 0630 (which will revert to 0530 once >> daylight savings ends here), I’m not really awake enough to contribute >> much. So optimise for those doing most of the work (hence needing most of >> the coordination), and I’ll do what I can to match that if I’m travelling. >> >> >> >> Brad >> >> >> >> *From:* Andrea Aime >> *Sent:* Tuesday, 11 December 2018 4:52 AM >> *To:* Torben Barsballe >> *Cc:* Geoserver-devel ; >> Geotools-Devel list >> *Subject:* Re: [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at >> 19:30 UTC tomorrow >> >> >> >> On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe < >> tbarsba...@boundlessgeo.com> wrote: >> >> >> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2016=11=29=19=30=0=1 >> >> >> >> (There's been some discussion about moving this meeting to the earlier >> 16:00 UTC timeslot, but no real consensus as of yet... assuming this is >> unchanged for now). >> >> >> >> I'd like to hear from Brad if he's going to participate, given that 19:30 >> UTC seems to correspond to 6:30AM his time :-) >> >> I'm all for keeping the meetings open to as many as possible, as long as >> the opportunity is actually used :-) >> >> >> >> Cheers >> >> Andrea >> >> >> >> == >> >> GeoServer Professional Services from the experts! Visit >> http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf >> Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa >> (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 >> http://www.geo-solutions.it http://twitter.com/geosolutions_it >> --- *Con riferimento >> alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - >> Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni >> circostanza inerente alla presente email (il suo contenuto, gli eventuali >> allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i >> destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per >> errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le >> sarei comunque grato se potesse darmene notizia. This email is intended >> only for the person or entity to which it is addressed and may contain >> information that is privileged, confidential or otherwise protected from >> disclosure. We remind that - as provided by European Regulation 2016/679 >> “GDPR” - copying, dissemination or use of this e-mail or the information >> herein by anyone other than the intended recipient is prohibited. If you >> have received this email by mistake, please notify us immediately by >> telephone or e-mail.* >> > ___ > GeoTools-Devel mailing list > GeoTools-Devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/geotools-devel > -- Ian Turton ___ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
Re: [Geotools-devel] [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow
Even if I could occasionally make 0630 (which will revert to 0530 once daylight savings ends here), I’m not really awake enough to contribute much. So optimise for those doing most of the work (hence needing most of the coordination), and I’ll do what I can to match that if I’m travelling. Brad From: Andrea Aime Sent: Tuesday, 11 December 2018 4:52 AM To: Torben Barsballe Cc: Geoserver-devel ; Geotools-Devel list Subject: Re: [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe mailto:tbarsba...@boundlessgeo.com> > wrote: https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting <https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2016=11=29=19=30=0=1> =2016=11=29=19=30=0=1 (There's been some discussion about moving this meeting to the earlier 16:00 UTC timeslot, but no real consensus as of yet... assuming this is unchanged for now). I'd like to hear from Brad if he's going to participate, given that 19:30 UTC seems to correspond to 6:30AM his time :-) I'm all for keeping the meetings open to as many as possible, as long as the opportunity is actually used :-) Cheers Andrea == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail. ___ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
Re: [Geotools-devel] [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow
Based on the last discussion about moving the meeting, Brad did say to " just do what works well for the other PSC members", so we could probably move this meeting to 16:00 as well. *Does anyone else have any objections to moving this meeting?* Cheers, Torben On Mon, Dec 10, 2018 at 9:51 AM Andrea Aime wrote: > On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe < > tbarsba...@boundlessgeo.com> wrote: > >> >> https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2016=11=29=19=30=0=1 >> >> (There's been some discussion about moving this meeting to the earlier >> 16:00 UTC timeslot, but no real consensus as of yet... assuming this is >> unchanged for now). >> > > I'd like to hear from Brad if he's going to participate, given that 19:30 > UTC seems to correspond to 6:30AM his time :-) > I'm all for keeping the meetings open to as many as possible, as long as > the opportunity is actually used :-) > > Cheers > Andrea > > == > > GeoServer Professional Services from the experts! Visit > http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf > Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa > (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 > http://www.geo-solutions.it http://twitter.com/geosolutions_it > --- *Con riferimento > alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - > Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni > circostanza inerente alla presente email (il suo contenuto, gli eventuali > allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i > destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per > errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le > sarei comunque grato se potesse darmene notizia. This email is intended > only for the person or entity to which it is addressed and may contain > information that is privileged, confidential or otherwise protected from > disclosure. We remind that - as provided by European Regulation 2016/679 > “GDPR” - copying, dissemination or use of this e-mail or the information > herein by anyone other than the intended recipient is prohibited. If you > have received this email by mistake, please notify us immediately by > telephone or e-mail.* > ___ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
Re: [Geotools-devel] [Geoserver-devel] Reminder: GeoTools/GeoServer meeting at 19:30 UTC tomorrow
On Mon, Dec 10, 2018 at 6:41 PM Torben Barsballe < tbarsba...@boundlessgeo.com> wrote: > > https://www.timeanddate.com/worldclock/fixedtime.html?msg=GeoTools+%2F+GeoServer+Meeting=2016=11=29=19=30=0=1 > > (There's been some discussion about moving this meeting to the earlier > 16:00 UTC timeslot, but no real consensus as of yet... assuming this is > unchanged for now). > I'd like to hear from Brad if he's going to participate, given that 19:30 UTC seems to correspond to 6:30AM his time :-) I'm all for keeping the meetings open to as many as possible, as long as the opportunity is actually used :-) Cheers Andrea == GeoServer Professional Services from the experts! Visit http://goo.gl/it488V for more information. == Ing. Andrea Aime @geowolf Technical Lead GeoSolutions S.A.S. Via di Montramito 3/A 55054 Massarosa (LU) phone: +39 0584 962313 fax: +39 0584 1660272 mob: +39 339 8844549 http://www.geo-solutions.it http://twitter.com/geosolutions_it --- *Con riferimento alla normativa sul trattamento dei dati personali (Reg. UE 2016/679 - Regolamento generale sulla protezione dei dati “GDPR”), si precisa che ogni circostanza inerente alla presente email (il suo contenuto, gli eventuali allegati, etc.) è un dato la cui conoscenza è riservata al/i solo/i destinatario/i indicati dallo scrivente. Se il messaggio Le è giunto per errore, è tenuta/o a cancellarlo, ogni altra operazione è illecita. Le sarei comunque grato se potesse darmene notizia. This email is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. We remind that - as provided by European Regulation 2016/679 “GDPR” - copying, dissemination or use of this e-mail or the information herein by anyone other than the intended recipient is prohibited. If you have received this email by mistake, please notify us immediately by telephone or e-mail.* ___ GeoTools-Devel mailing list GeoTools-Devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/geotools-devel
