Re: ANTP0102I ESTAB. PAIR FAILED- DEVICES NOT IN SUSPEND

[JC Jung]

This problem resolved.

It was found that it is 4096 not 8192 per consistency group. So we have 
hit this maximum. For the cestpair commands the AG000 parameter should be 
AG010 for consistency group 01. This has enabled another 4096 pairs which 
will be in consistency group 1.


 CESTPAIR DEVN(X'C5A9') PRIM(X'C005' AG000 X'A9' X'05')   +
 SEC(X'C805' 11462 X'A9' X'05')   +
 MODE(COPY) PACE(15) CRIT(NO) MSGREQ(NO)

Where “AG000” parameter :
A = Asynchronous mode
G = Consistency group
“00” = Consistency group number. 
“0” = Normal delay for command retry

Hope it helps.

Many thanks for help. JC

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html

Re: ANTP0102I ESTAB. PAIR FAILED- DEVICES NOT IN SUSPEND

[JC Jung]

Hi, Peter

Attached is the command output of CQUERY and D M=DEV(). Please take a 
look! Much appreciate it in advance.

JC

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
1READY
  CQUERY DEVN(X'D7FB') VOLUME
 CQUERY FORMATTED LVL 3
 VOLUME REPORT
 ** PPRC REMOTE COPY CQUERY - VOLUME 
 *  (PRIMARY)   (SECONDARY) *
 * SSID CCA LSS SSID CCA LSS*
 *DEVICE   LEVEL  STATE PATH STATUS  SERIAL# SERIAL#*
 *-- -  --  --- --  *
 * D7FB  .  SIMPLEX...   INACTIVE   D007 FB 17   .. *
 *   ...   ... 00011526 *
 * PATHS SAID DEST STATUS: DESCRIPTION  *
 * - - --  ---  *
 *   0       00NO PATH  *
 *       00NO PATH  *
 *       00NO PATH  *
 *       00NO PATH  *
 *  SUBSYSTEM WWNN   LIC LEVEL  *
 * ---  --- *
 * PRIMARY  80.5.70.0   *
 
 CQUERY COMMAND COMPLETED FOR DEVICE D7FB. COMPLETION CODE: 00
 READY
  CQUERY DEVN(X'D7FB') PATHS
 CQUERY FORMATTED LVL 3
 PATHS REPORT
 *** PPRC REMOTE COPY CQUERY - PATHS 
 * PRIMARY UNIT: SERIAL#= 00011526 SSID= D007 SS= 2105 LSS= 17  *
 *  FIRSTSECOND THIRD FOURTH*
 *SECONDARY SECONDARY SECONDARY SECONDARY   *
 *SERIAL NO: 00011462       *
 * SSID LSS:   D807 17   ...   ...   ...*
 *PATHS:  4 0 0 0   *
 *   SAID DEST S*  SAID DEST S*  SAID DEST S*  SAID DEST S* *
 *   - --  - --  - --  - -- *
 *1: 4004 2617 01    00    00    00 *
 *2: 4014 3617 01    00    00    00 *
 *3: 4024 0617 01    00    00    00 *
 *4: 4034 1617 01    00    00    00 *
 *  SUBSYSTEM WWNN   LIC LEVEL  *
 * ---  --- *
 * PRIMARY  80.5.70.0   *
 *  *
 * S* = PATH STATUS:*
 * 00=NO PATH  01=ESTABLISHED ESCON   02=INIT FAILED*
 * 03=TIME OUT 04=NO RESOURCES AT PRI 05=NO RESOURCES AT SEC*
 * 06=SERIAL# MISMATCH 07=SEC SSID MISMATCH   08=ESCON LINK OFFLINE *
 * 09=ESTABLISH RETRY  0A=PATH ACTIVE TO HOST 0B=PATH TO SAME CLUSTR*
 * 10=CONFIG ERROR FF=UNABLE TO DETERMINE   *
 
 CQUERY COMMAND COMPLETED FOR DEVICE D7FB. COMPLETION CODE: 00
 READY
 END

D M=DEV(D7FB)   
IEE174I 11.47.01 DISPLAY M 532  
DEVICE D7FB   STATUS=ONLINE 
CHP   DA   DB   DC   DE 
ENTRY LINK ADDRESS14   14   1C   1C 
DEST LINK ADDRESS 2C   2C   34   34 
PATH ONLINE   YYYY  
CHP PHYSICALLY ONLINE YYYY  
PATH OPERATIONAL  YYYY  
MANAGED   NNNN  
CU NUMBER D007 D007 D007 D007   
MAXIMUM MANAGED CHPID(S) ALLOWED:  0
DESTINATION CU LOGICAL ADDRESS = 17 
SCP CU ND = 002105.000.HTC.55.00011526.0021 
SCP TOKEN NED = 002105.000.HTC.55.00011526.1700 
SCP DEVICE NED= 002105.000.HTC.55.00011526.17FB


ANTP0102I ESTAB. PAIR FAILED- DEVICES NOT IN SUSPEND

[JC Jung]

Hello, there

I ran into the message ANTP0102I. Attached are the control card and job 
output. Is there something I have missed?

Any comments are appreciated. 

//STEP1 EXEC PGM=IKJEFT01  
//SYSTSPRT DD SYSOUT=* 
//SYSTSIN  DD *
 CESTPAIR DEVN(X'C5A9') PRIM(X'C005' AG000 X'A9' X'05')   +
 SEC(X'C805' 11462 X'A9' X'05')   +
 MODE(COPY) PACE(15) CRIT(NO) MSGREQ(NO)

ANTP8802I  CESTPAIR DEVN(X'C5A9') PRIM(X'C005' AG000 X'A9' 
X'05')  
ANTP8802I (CONT)MODE(COPY) PACE(15) CRIT(NO) MSGREQ
(NO)
ANTP0102I ESTAB. PAIR FAILED- DEVICES NOT IN SUSPEND 
MODE  
ANTP0001I CESTPAIR COMMAND UNSUCCESSFUL FOR DEVICE C5A9. COMPLETION CODE: 
08   
   

--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html