Re: Xymon
Berry van Sleeuwen wrote: >We don't have TCPIP available in VSE so we can't use >it unmodified in VSE. I think you can, actually. Just set up z/VSE Linux Fast Path or the z/VSE Network Appliance (z13/z13s or higher for the latter), which are both available at no additional charge with your z/VSE base operating system license, then connect to Xymon running on Linux on the same IBM Z machine. If for some odd reason you don't wish to run the Xymon server on Linux on that machine, use xymonproxy for Linux on Z as a forwarder. As far as the network connectivity configurations, true, you cannot monitor something if you cannot connect to it. But that should be a configuration choice, not a permanent state of being. Xymonproxy might also be helpful here. Timothy Sipples IT Architect Executive, Industry Solutions, IBM Z & LinuxONE E-Mail: sipp...@sg.ibm.com -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
We don't have TCPIP available in VSE so we can't use it unmodified in VSE. A similar problem is in VM, we have IP stacks in VM that cannot reach the Xymon server because they are in different IP segments. Even if we had TCPIP in VSE they probably would be in the same IP segment as the zVM stacks so it would have the same problem as VM itself. In VM we use a shared disk to provide datafiles instead of a direct connection to the Xymon server. Perhaps we might do something similar for VSE (transmit the data to zVM) but I didn't looked into the details for that. Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven -Original Message- From: Linux on 390 Port On Behalf Of Frank M. Ramaekers Sent: Thursday, January 24, 2019 6:15 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Mine is from a Hobbit Client from Rich Smrcina (modified). It provides "cpu" (utilization), "procs" (occupied partitions) and "sp_util "(spool utilization). Frank M. Ramaekers Jr. Unisys | Mainframe Systems Analyst I -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of van Sleeuwen, Berry Sent: Thursday, January 24, 2019 7:01 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Hi Tom, Yes, we use Xymon with HOBBITVM to monitor z/VM and z/VSE. Though VSE is quite crude, the monitoring is done by checking the OPERATOR log, where we collect some messages from commands to VSE. (OPERATOR issues an ASO command, the output is found in the OPERATOR log.) Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven -Original Message- From: Linux on 390 Port On Behalf Of Tom Huegel Sent: Wednesday, January 23, 2019 9:15 PM To: LINUX-390@VM.MARIST.EDU Subject: Xymon Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttps-3A__emea01.safelinks.protection.outlook.com_-3Furl-3Dhttp-253A-252F-252Fwww.marist.edu-252Fhtbin-252Fwlvindex-253FLINUX-2D390-26amp-3Bdata-3D02-257C01-257CBerry.vanSleeuwen-2540atos.net-257Cef925448f3d74d9912b708d6816fb3f2-257C33440fc6b7c7412cbb730e70b0198d5a-257C0-257C0-257C636838714128812846-26amp-3Bsdata-3DdFlBL82vPT8-252FQcETk6dEAzD-252BVlhV8HX-252Ff1CLM8xuGqQ-253D-26amp-3Breserved-3D0%26d%3DDwIFaQ%26c%3DlaxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts%26r%3DEOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ%26m%3Dr958DqKVJhIrUTC80vpQuf6dUMLclqzcpmhlou6zpmA%26s%3D08W4hFaVq2XudCyfEwuhRO_rpPVi88IxbCdQ95mdIZ8%26edata=02%7C01%7CBerry.vanSleeuwen%40atos.net%7C4ee5aa7bd5d84fddafa808d68221668d%7C33440fc6b7c7412cbb730e70b0198d5a%7C0%7C0%7C636839477334667555sdata=AdbfHS%2Bq89sBt3IE7vczkX1Xf4ULSCkqMK7zA2STS50%3Dreserved=0= This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, Atos' liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. On all offers and agreements under which Atos Nederland B.V. supplies goods and/or services of whatever nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. The Terms of Delivery shall be promptly submitted to you on your request. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Furldefense.proofpoint.com%2Fv2%2Furl%3Fu%3Dhttp-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390%26d%3DDwIFaQ%26c%3DlaxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts%26r%3DEOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ%26m%3Dr958DqKVJhIrUTC80vpQuf6dUMLclqzcpmhlou6zpmA%26s%3DBYLxmlPMCBHD02jcbchvT3fV4ODjsUZQwXjMJ28JsxU%26edata=02%7C01%7CBerry.vanSleeuwen%40atos.net%7C4ee5aa7bd5d84fddafa808d68221668d%7C33440fc6b7c7412cbb730e70b0198d5a%7C0%7C0%7C636839477334667555sdata=VQ2%2FREI%2FSYO6QMesllb0cShjf20i99dMno92zG2Qre0%3Dreserved=0= -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that a
Re: Xymon
Mine is from a Hobbit Client from Rich Smrcina (modified). It provides "cpu" (utilization), "procs" (occupied partitions) and "sp_util "(spool utilization). Frank M. Ramaekers Jr. Unisys | Mainframe Systems Analyst I -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of van Sleeuwen, Berry Sent: Thursday, January 24, 2019 7:01 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Hi Tom, Yes, we use Xymon with HOBBITVM to monitor z/VM and z/VSE. Though VSE is quite crude, the monitoring is done by checking the OPERATOR log, where we collect some messages from commands to VSE. (OPERATOR issues an ASO command, the output is found in the OPERATOR log.) Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven -Original Message- From: Linux on 390 Port On Behalf Of Tom Huegel Sent: Wednesday, January 23, 2019 9:15 PM To: LINUX-390@VM.MARIST.EDU Subject: Xymon Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=https-3A__emea01.safelinks.protection.outlook.com_-3Furl-3Dhttp-253A-252F-252Fwww.marist.edu-252Fhtbin-252Fwlvindex-253FLINUX-2D390-26amp-3Bdata-3D02-257C01-257CBerry.vanSleeuwen-2540atos.net-257Cef925448f3d74d9912b708d6816fb3f2-257C33440fc6b7c7412cbb730e70b0198d5a-257C0-257C0-257C636838714128812846-26amp-3Bsdata-3DdFlBL82vPT8-252FQcETk6dEAzD-252BVlhV8HX-252Ff1CLM8xuGqQ-253D-26amp-3Breserved-3D0=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=r958DqKVJhIrUTC80vpQuf6dUMLclqzcpmhlou6zpmA=08W4hFaVq2XudCyfEwuhRO_rpPVi88IxbCdQ95mdIZ8= This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, Atos’ liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. On all offers and agreements under which Atos Nederland B.V. supplies goods and/or services of whatever nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. The Terms of Delivery shall be promptly submitted to you on your request. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=r958DqKVJhIrUTC80vpQuf6dUMLclqzcpmhlou6zpmA=BYLxmlPMCBHD02jcbchvT3fV4ODjsUZQwXjMJ28JsxU= -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Thanks, Juha. I wasn't aware that anyone had picked them up and continued development. Its good to know. Martha On 1/23/2019 6:56 PM, Juha Vuori wrote: Hi, Xymon clients for z/OS, z/VSE and z/VM (currently called zXymon) can be downloaded in http://download.savannah.nongnu.org/releases/zxymon/ They still work well together with the latest Xymon server (stable version 4.3.28). zXymon development tree has few enhancements (too few worth of a new release). If you have made good enhancements to the code/functionality, I'd be more than happy if you'd like to share them to the development tree! -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Very cool. Thanks Juha! David Diep -Original Message- From: Linux on 390 Port On Behalf Of Juha Vuori Sent: Wednesday, January 23, 2019 6:57 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon CAUTION: This email originated from outside of the DC Government. Do not click on links or open attachments unless you recognize the sender and know that the content is safe. If you believe that this email is suspicious, please forward to phish...@dc.gov for additional analysis by OCTO Security Operations Center (SOC). Hi, Xymon clients for z/OS, z/VSE and z/VM (currently called zXymon) can be downloaded in http://download.savannah.nongnu.org/releases/zxymon/ They still work well together with the latest Xymon server (stable version 4.3.28). zXymon development tree has few enhancements (too few worth of a new release). If you have made good enhancements to the code/functionality, I'd be more than happy if you'd like to share them to the development tree! -- Best regards, Juha Vuori IT Services Juha Vuori Oy On 23.1.2019 23.04, Martha McConaghy wrote: > Its just a set of REXX execs that Rich wrote some years ago. They used > to be on the site, but that was back when it was Hobbit. I'm not sure > they are still there. (Richare you listening?) > > If all else fails, I can pack up what I have and make them available > somewhere. > > Martha > > On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: >> Martha, I had no idea there is a XYMON client for z/VM. Is it >> downloadable from the XYMON project website? >> -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Hi Tom, Yes, we use Xymon with HOBBITVM to monitor z/VM and z/VSE. Though VSE is quite crude, the monitoring is done by checking the OPERATOR log, where we collect some messages from commands to VSE. (OPERATOR issues an ASO command, the output is found in the OPERATOR log.) Met vriendelijke groet/With kind regards/Mit freundlichen Grüßen, Berry van Sleeuwen Flight Forum 3000 5657 EW Eindhoven -Original Message- From: Linux on 390 Port On Behalf Of Tom Huegel Sent: Wednesday, January 23, 2019 9:15 PM To: LINUX-390@VM.MARIST.EDU Subject: Xymon Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://emea01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.marist.edu%2Fhtbin%2Fwlvindex%3FLINUX-390data=02%7C01%7CBerry.vanSleeuwen%40atos.net%7Cef925448f3d74d9912b708d6816fb3f2%7C33440fc6b7c7412cbb730e70b0198d5a%7C0%7C0%7C636838714128812846sdata=dFlBL82vPT8%2FQcETk6dEAzD%2BVlhV8HX%2Ff1CLM8xuGqQ%3Dreserved=0 This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, Atos’ liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. On all offers and agreements under which Atos Nederland B.V. supplies goods and/or services of whatever nature, the Terms of Delivery from Atos Nederland B.V. exclusively apply. The Terms of Delivery shall be promptly submitted to you on your request. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Here's the main landing page for the z/VM, z/OS, and z/VSE clients for Xymon (that Juha Vuori maintains): http://savannah.nongnu.org/projects/zxymon Here's the main landing page for the Xymon systems and network management software project on Sourceforge: https://sourceforge.net/projects/xymon/ Source code is available there. Pre-built binaries are available in many cases. In Ubuntu 18.04 LTS ("Bionic"), for example, the package name for the server is xymon_4.3.28-3build1_s390x.deb and should be available from the main repositories. Neale Ferguson built RPMs for the Xymon server and client, available here: http://download.sinenomine.net/epel/epel-7/s390x/xymon-4.3.28-2.el7.s390x.rpm http://download.sinenomine.net/epel/epel-7/s390x/xymon-client-4.3.28-2.el7.s390x.rpm The z/OS and z/VSE clients include some basic monitoring for CICS, which is quite interesting. You'll probably want to configure Xymon to monitor other subsystems and workloads across operating systems and devices. Timothy Sipples IT Architect Executive, Industry Solutions, IBM Z & LinuxONE E-Mail: sipp...@sg.ibm.com -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
There is a client for z/VSE. Frank M. Ramaekers Jr. Unisys | Mainframe Systems Analyst I -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 2:25 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon We use Xymon to monitor all of our servers, regardless of platform. I have not done VSE as we don't have it. However, there is a client that works on z/OS, which we use a lot. It probably can be modified to work on VSE. I think Rich Smrcina wrote it. Martha On 1/23/2019 3:15 PM, Tom Huegel wrote: > Just wondering if anyone has used Xymon in z/LINUX to monitor other > OS's ie z/VSE? > > -- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htb > in_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U > 8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=xlYv43n47Ay > gu4ZhL0D5rfZ8Ntjvw_uoxMqWrV_-yGY=P1zBMYbSZAaqi59z9qxjcDCq6FpQyUQDLG4 > TiqDxJ1k= -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=xlYv43n47Aygu4ZhL0D5rfZ8Ntjvw_uoxMqWrV_-yGY=P1zBMYbSZAaqi59z9qxjcDCq6FpQyUQDLG4TiqDxJ1k= -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
I'm using ClefOS. Frank M. Ramaekers Jr. Unisys | Mainframe Systems Analyst I -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Tom Huegel Sent: Wednesday, January 23, 2019 2:30 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Martha, What platform do you run Xymon server on? Thanks - Tom On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: > We use Xymon to monitor all of our servers, regardless of platform. I > have not done VSE as we don't have it. However, there is a client that > works on z/OS, which we use a lot. It probably can be modified to > work on VSE. I think Rich Smrcina wrote it. > > Martha > > On 1/23/2019 3:15 PM, Tom Huegel wrote: > > Just wondering if anyone has used Xymon in z/LINUX to monitor other > > OS's > ie > > z/VSE? > > > > > > -- For LINUX-390 subscribe / signoff / archive access instructions, > > send email to lists...@vm.marist.edu with the message: INFO > > LINUX-390 > or visit > > https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_h > > tbin_wlvindex-3FLINUX-2D390=DwIBaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3 > > u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=7E3k4 > > KSamZpkJi_dyx1lmi20O7rrr4y1sF6Q3rDZ41M=AikHDbrGi23R2EvCm5GqPSYEptv > > wWDQ84XeMDeNDho0= > > -- > Martha McConaghy > Marist: System Architect/Technical Lead > SHARE: Vice President > Marist College IT > Poughkeepsie, NY 12601 > > -- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htb > in_wlvindex-3FLINUX-2D390=DwIBaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U > 8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=7E3k4KSamZp > kJi_dyx1lmi20O7rrr4y1sF6Q3rDZ41M=AikHDbrGi23R2EvCm5GqPSYEptvwWDQ84Xe > MDeNDho0= > -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIBaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=7E3k4KSamZpkJi_dyx1lmi20O7rrr4y1sF6Q3rDZ41M=AikHDbrGi23R2EvCm5GqPSYEptvwWDQ84XeMDeNDho0= -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Yes. Frank M. Ramaekers Jr. Unisys | Mainframe Systems Analyst I -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Tom Huegel Sent: Wednesday, January 23, 2019 2:15 PM To: LINUX-390@VM.MARIST.EDU Subject: Xymon Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIBaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=DPjy9uuSa_xWJA1eG3CWyFhQSgMFwZwlD1runlE-Bsg=FWZw3OHAkKsT_KH6ZDeQP0wJt5kbK4-2KjYB1xUstn0= -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Hi, Xymon clients for z/OS, z/VSE and z/VM (currently called zXymon) can be downloaded in http://download.savannah.nongnu.org/releases/zxymon/ They still work well together with the latest Xymon server (stable version 4.3.28). zXymon development tree has few enhancements (too few worth of a new release). If you have made good enhancements to the code/functionality, I'd be more than happy if you'd like to share them to the development tree! -- Best regards, Juha Vuori IT Services Juha Vuori Oy On 23.1.2019 23.04, Martha McConaghy wrote: Its just a set of REXX execs that Rich wrote some years ago. They used to be on the site, but that was back when it was Hobbit. I'm not sure they are still there. (Richare you listening?) If all else fails, I can pack up what I have and make them available somewhere. Martha On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: Martha, I had no idea there is a XYMON client for z/VM. Is it downloadable from the XYMON project website? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Martha: z/VSE does include REXX/VSE which is a subset of REXX on z/OS. A port of the z/OS client should not be a large effort. Jim Elliott On Wed, Jan 23, 2019 at 4:26 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: > Defining the template to match the MIB information is the big PITA, > though. There is a Xymon plugin named devmon, which is what we use to > monitor the network equipment, environmentals, etc. It talks snmp, but > has limited capabilities. There might be a newer one out there, I > haven't kept up on it in a few years. > > I think the z/OS clients are also in REXX, so should be easy to port to > VSE, if it supports that. (Sorry, I don't recall off the top of my > head.) Then it is just a matter of updating the execs to look at the > right spots in the system. > > Martha > > On 1/23/2019 4:12 PM, Stuart, David wrote: > > If Xymon can talk SNMP, which it probably can if it's monitoring network > equipment, there's an SNMP 'agent' (?) that's part of z/VSE that will tell > you if the System is responding, at a minimum. I believe there is other > info you can get from the SNMP 'agent' as well. I've played with it some, > but we don’t actually use it. > > > > > > Dave > > > > > > Dave Stuart > > Principal Info. Systems Support Analyst > > County of Ventura > > 805-662-6731 > > david.stu...@ventura.org > > > > > > -Original Message- > > From: Linux on 390 Port On Behalf Of Martha > McConaghy > > Sent: Wednesday, January 23, 2019 1:05 PM > > To: LINUX-390@VM.MARIST.EDU > > Subject: Re: Xymon > > > > Its just a set of REXX execs that Rich wrote some years ago. They used > to be on the site, but that was back when it was Hobbit. I'm not sure they > are still there. (Richare you listening?) > > > > If all else fails, I can pack up what I have and make them available > somewhere. > > > > Martha > > > > On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: > >> Martha, I had no idea there is a XYMON client for z/VM. Is it > downloadable from the XYMON project website? > >> > >> > >> -Original Message- > >> From: Linux on 390 Port On Behalf Of Martha > >> McConaghy > >> Sent: Wednesday, January 23, 2019 3:38 PM > >> To: LINUX-390@VM.MARIST.EDU > >> Subject: Re: Xymon > >> > >> CAUTION: This email originated from outside of the DC Government. Do > not click on links or open attachments unless you recognize the sender and > know that the content is safe. If you believe that this email is > suspicious, please forward to phish...@dc.gov for additional analysis by > OCTO Security Operations Center (SOC). > >> > >> > >> SLES 12 on z/VM. Should not matter to the clients, though. We monitor > z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. > >> Also monitor all network equipment. > >> > >> Martha > >> > >> On 1/23/2019 3:29 PM, Tom Huegel wrote: > >>> Martha, What platform do you run Xymon server on? Thanks - Tom > >>> > >>> On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < > >>> martha.mccona...@marist.edu> wrote: > >>> > >>>> We use Xymon to monitor all of our servers, regardless of platform. I > >>>> have not done VSE as we don't have it. However, there is a client > that > >>>> works on z/OS, which we use a lot. It probably can be modified to > >>>> work on VSE. I think Rich Smrcina wrote it. > >>>> > >>>> Martha > >>>> > >>>> On 1/23/2019 3:15 PM, Tom Huegel wrote: > >>>>> Just wondering if anyone has used Xymon in z/LINUX to monitor other > >>>>> OS's > >>>> ie > >>>>> z/VSE? > >>>>> > >>>>> --- > >>>>> - > >>>>> -- For LINUX-390 subscribe / signoff / archive access instructions, > >>>>> send email to lists...@vm.marist.edu with the message: INFO > >>>>> LINUX-390 > >>>> or visit > >>>>> http://www.marist.edu/htbin/wlvindex?LINUX-390 > >>>> -- > >>>> Martha McConaghy > >>>> Marist: System Architect/Technical Lead > >>>> SHARE: Vice President > >>>> Marist College IT > >>>> Poughkeepsie, NY 12601 > >>>> > >>>> -
Re: Xymon
For z/VSE snmp see ... https://www.ibm.com/support/knowledgecenter/en/SSB27H_6.2.0/fa2ws_config_vse_monitoring_agent.html Also, Velocity has plugins for the above to provide better detail. Have fun! Regards, Jeff -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Hi Martha, Yes, z/VSE supports REXX, just not compiled REXX. And IBM published a MIB for z/VSE a few years ago. I don’t remember where I acquired a copy. I think it was about the same time they came out with the SNMP 'agent'. Dave -Original Message- From: Linux on 390 Port On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 1:25 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Defining the template to match the MIB information is the big PITA, though. There is a Xymon plugin named devmon, which is what we use to monitor the network equipment, environmentals, etc. It talks snmp, but has limited capabilities. There might be a newer one out there, I haven't kept up on it in a few years. I think the z/OS clients are also in REXX, so should be easy to port to VSE, if it supports that. (Sorry, I don't recall off the top of my head.) Then it is just a matter of updating the execs to look at the right spots in the system. Martha On 1/23/2019 4:12 PM, Stuart, David wrote: > If Xymon can talk SNMP, which it probably can if it's monitoring network > equipment, there's an SNMP 'agent' (?) that's part of z/VSE that will tell > you if the System is responding, at a minimum. I believe there is other info > you can get from the SNMP 'agent' as well. I've played with it some, but we > don’t actually use it. > > > Dave > > > Dave Stuart > Principal Info. Systems Support Analyst County of Ventura > 805-662-6731 > david.stu...@ventura.org > > > -Original Message- > From: Linux on 390 Port On Behalf Of Martha > McConaghy > Sent: Wednesday, January 23, 2019 1:05 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Xymon > > Its just a set of REXX execs that Rich wrote some years ago. They used to be > on the site, but that was back when it was Hobbit. I'm not sure they are > still there. (Richare you listening?) > > If all else fails, I can pack up what I have and make them available > somewhere. > > Martha > > On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: >> Martha, I had no idea there is a XYMON client for z/VM. Is it downloadable >> from the XYMON project website? >> >> >> -Original Message- >> From: Linux on 390 Port On Behalf Of Martha >> McConaghy >> Sent: Wednesday, January 23, 2019 3:38 PM >> To: LINUX-390@VM.MARIST.EDU >> Subject: Re: Xymon >> >> CAUTION: This email originated from outside of the DC Government. Do not >> click on links or open attachments unless you recognize the sender and know >> that the content is safe. If you believe that this email is suspicious, >> please forward to phish...@dc.gov for additional analysis by OCTO Security >> Operations Center (SOC). >> >> >> SLES 12 on z/VM. Should not matter to the clients, though. We monitor >> z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. >> Also monitor all network equipment. >> >> Martha >> >> On 1/23/2019 3:29 PM, Tom Huegel wrote: >>> Martha, What platform do you run Xymon server on? Thanks - Tom >>> >>> On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < >>> martha.mccona...@marist.edu> wrote: >>> >>>> We use Xymon to monitor all of our servers, regardless of platform. I >>>> have not done VSE as we don't have it. However, there is a client that >>>> works on z/OS, which we use a lot. It probably can be modified to >>>> work on VSE. I think Rich Smrcina wrote it. >>>> >>>> Martha >>>> >>>> On 1/23/2019 3:15 PM, Tom Huegel wrote: >>>>> Just wondering if anyone has used Xymon in z/LINUX to monitor other >>>>> OS's >>>> ie >>>>> z/VSE? >>>>> >>>>> --- >>>>> - >>>>> -- For LINUX-390 subscribe / signoff / archive access instructions, >>>>> send email to lists...@vm.marist.edu with the message: INFO >>>>> LINUX-390 >>>> or visit >>>>> http://www.marist.edu/htbin/wlvindex?LINUX-390 >>>> -- >>>> Martha McConaghy >>>> Marist: System Architect/Technical Lead >>>> SHARE: Vice President >>>> Marist College IT >>>> Poughkeepsie, NY 12601 >>>> >>>> >>>> - >>>> - For LINUX-390 subscribe / signoff / archive access instructions, >>>> send email to lists...@vm.marist.edu with the message: INFO >>>> LINUX-390 or visit >
Re: Xymon
Defining the template to match the MIB information is the big PITA, though. There is a Xymon plugin named devmon, which is what we use to monitor the network equipment, environmentals, etc. It talks snmp, but has limited capabilities. There might be a newer one out there, I haven't kept up on it in a few years. I think the z/OS clients are also in REXX, so should be easy to port to VSE, if it supports that. (Sorry, I don't recall off the top of my head.) Then it is just a matter of updating the execs to look at the right spots in the system. Martha On 1/23/2019 4:12 PM, Stuart, David wrote: If Xymon can talk SNMP, which it probably can if it's monitoring network equipment, there's an SNMP 'agent' (?) that's part of z/VSE that will tell you if the System is responding, at a minimum. I believe there is other info you can get from the SNMP 'agent' as well. I've played with it some, but we don’t actually use it. Dave Dave Stuart Principal Info. Systems Support Analyst County of Ventura 805-662-6731 david.stu...@ventura.org -Original Message- From: Linux on 390 Port On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 1:05 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Its just a set of REXX execs that Rich wrote some years ago. They used to be on the site, but that was back when it was Hobbit. I'm not sure they are still there. (Richare you listening?) If all else fails, I can pack up what I have and make them available somewhere. Martha On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: Martha, I had no idea there is a XYMON client for z/VM. Is it downloadable from the XYMON project website? -Original Message- From: Linux on 390 Port On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 3:38 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon CAUTION: This email originated from outside of the DC Government. Do not click on links or open attachments unless you recognize the sender and know that the content is safe. If you believe that this email is suspicious, please forward to phish...@dc.gov for additional analysis by OCTO Security Operations Center (SOC). SLES 12 on z/VM. Should not matter to the clients, though. We monitor z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. Also monitor all network equipment. Martha On 1/23/2019 3:29 PM, Tom Huegel wrote: Martha, What platform do you run Xymon server on? Thanks - Tom On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: We use Xymon to monitor all of our servers, regardless of platform. I have not done VSE as we don't have it. However, there is a client that works on z/OS, which we use a lot. It probably can be modified to work on VSE. I think Rich Smrcina wrote it. Martha On 1/23/2019 3:15 PM, Tom Huegel wrote: Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? --- - -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 - - For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 - - For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LIN
Re: Xymon
If Xymon can talk SNMP, which it probably can if it's monitoring network equipment, there's an SNMP 'agent' (?) that's part of z/VSE that will tell you if the System is responding, at a minimum. I believe there is other info you can get from the SNMP 'agent' as well. I've played with it some, but we don’t actually use it. Dave Dave Stuart Principal Info. Systems Support Analyst County of Ventura 805-662-6731 david.stu...@ventura.org -Original Message- From: Linux on 390 Port On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 1:05 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon Its just a set of REXX execs that Rich wrote some years ago. They used to be on the site, but that was back when it was Hobbit. I'm not sure they are still there. (Richare you listening?) If all else fails, I can pack up what I have and make them available somewhere. Martha On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: > Martha, I had no idea there is a XYMON client for z/VM. Is it downloadable > from the XYMON project website? > > > -Original Message- > From: Linux on 390 Port On Behalf Of Martha > McConaghy > Sent: Wednesday, January 23, 2019 3:38 PM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: Xymon > > CAUTION: This email originated from outside of the DC Government. Do not > click on links or open attachments unless you recognize the sender and know > that the content is safe. If you believe that this email is suspicious, > please forward to phish...@dc.gov for additional analysis by OCTO Security > Operations Center (SOC). > > > SLES 12 on z/VM. Should not matter to the clients, though. We monitor z/OS, > z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. > Also monitor all network equipment. > > Martha > > On 1/23/2019 3:29 PM, Tom Huegel wrote: >> Martha, What platform do you run Xymon server on? Thanks - Tom >> >> On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < >> martha.mccona...@marist.edu> wrote: >> >>> We use Xymon to monitor all of our servers, regardless of platform. I >>> have not done VSE as we don't have it. However, there is a client that >>> works on z/OS, which we use a lot. It probably can be modified to >>> work on VSE. I think Rich Smrcina wrote it. >>> >>> Martha >>> >>> On 1/23/2019 3:15 PM, Tom Huegel wrote: >>>> Just wondering if anyone has used Xymon in z/LINUX to monitor other >>>> OS's >>> ie >>>> z/VSE? >>>> >>>> --- >>>> - >>>> -- For LINUX-390 subscribe / signoff / archive access instructions, >>>> send email to lists...@vm.marist.edu with the message: INFO >>>> LINUX-390 >>> or visit >>>> http://www.marist.edu/htbin/wlvindex?LINUX-390 >>> -- >>> Martha McConaghy >>> Marist: System Architect/Technical Lead >>> SHARE: Vice President >>> Marist College IT >>> Poughkeepsie, NY 12601 >>> >>> >>> - >>> - For LINUX-390 subscribe / signoff / archive access instructions, >>> send email to lists...@vm.marist.edu with the message: INFO >>> LINUX-390 or visit >>> http://www.marist.edu/htbin/wlvindex?LINUX-390 >>> >> - >> - For LINUX-390 subscribe / signoff / archive access instructions, >> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 >> or visit >> http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- > Martha McConaghy > Marist: System Architect/Technical Lead > SHARE: Vice President > Marist College IT > Poughkeepsie, NY 12601 > > -- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > -- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Its just a set of REXX execs that Rich wrote some years ago. They used to be on the site, but that was back when it was Hobbit. I'm not sure they are still there. (Richare you listening?) If all else fails, I can pack up what I have and make them available somewhere. Martha On 1/23/2019 3:49 PM, Diep, David (OCTO) wrote: Martha, I had no idea there is a XYMON client for z/VM. Is it downloadable from the XYMON project website? -Original Message- From: Linux on 390 Port On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 3:38 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon CAUTION: This email originated from outside of the DC Government. Do not click on links or open attachments unless you recognize the sender and know that the content is safe. If you believe that this email is suspicious, please forward to phish...@dc.gov for additional analysis by OCTO Security Operations Center (SOC). SLES 12 on z/VM. Should not matter to the clients, though. We monitor z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. Also monitor all network equipment. Martha On 1/23/2019 3:29 PM, Tom Huegel wrote: Martha, What platform do you run Xymon server on? Thanks - Tom On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: We use Xymon to monitor all of our servers, regardless of platform. I have not done VSE as we don't have it. However, there is a client that works on z/OS, which we use a lot. It probably can be modified to work on VSE. I think Rich Smrcina wrote it. Martha On 1/23/2019 3:15 PM, Tom Huegel wrote: Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 - - For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Thanks Martha. I have a customer (z/VM z/VSE) that does not have any tools and are not willing to purchase any, yet they want me to monitor their system. I am exploring options. On Wed, Jan 23, 2019 at 2:40 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: > SLES 12 on z/VM. Should not matter to the clients, though. We monitor > z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. > Also monitor all network equipment. > > Martha > > On 1/23/2019 3:29 PM, Tom Huegel wrote: > > Martha, What platform do you run Xymon server on? Thanks - Tom > > > > On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < > > martha.mccona...@marist.edu> wrote: > > > >> We use Xymon to monitor all of our servers, regardless of platform. I > >> have not done VSE as we don't have it. However, there is a client that > >> works on z/OS, which we use a lot. It probably can be modified to work > >> on VSE. I think Rich Smrcina wrote it. > >> > >> Martha > >> > >> On 1/23/2019 3:15 PM, Tom Huegel wrote: > >>> Just wondering if anyone has used Xymon in z/LINUX to monitor other > OS's > >> ie > >>> z/VSE? > >>> > >>> -- > >>> For LINUX-390 subscribe / signoff / archive access instructions, > >>> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > >> or visit > >>> http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> -- > >> Martha McConaghy > >> Marist: System Architect/Technical Lead > >> SHARE: Vice President > >> Marist College IT > >> Poughkeepsie, NY 12601 > >> > >> -- > >> For LINUX-390 subscribe / signoff / archive access instructions, > >> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or > >> visit > >> http://www.marist.edu/htbin/wlvindex?LINUX-390 > >> > > > > -- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > -- > Martha McConaghy > Marist: System Architect/Technical Lead > SHARE: Vice President > Marist College IT > Poughkeepsie, NY 12601 > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Martha, I had no idea there is a XYMON client for z/VM. Is it downloadable from the XYMON project website? -Original Message- From: Linux on 390 Port On Behalf Of Martha McConaghy Sent: Wednesday, January 23, 2019 3:38 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: Xymon CAUTION: This email originated from outside of the DC Government. Do not click on links or open attachments unless you recognize the sender and know that the content is safe. If you believe that this email is suspicious, please forward to phish...@dc.gov for additional analysis by OCTO Security Operations Center (SOC). SLES 12 on z/VM. Should not matter to the clients, though. We monitor z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. Also monitor all network equipment. Martha On 1/23/2019 3:29 PM, Tom Huegel wrote: > Martha, What platform do you run Xymon server on? Thanks - Tom > > On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < > martha.mccona...@marist.edu> wrote: > >> We use Xymon to monitor all of our servers, regardless of platform. I >> have not done VSE as we don't have it. However, there is a client that >> works on z/OS, which we use a lot. It probably can be modified to >> work on VSE. I think Rich Smrcina wrote it. >> >> Martha >> >> On 1/23/2019 3:15 PM, Tom Huegel wrote: >>> Just wondering if anyone has used Xymon in z/LINUX to monitor other >>> OS's >> ie >>> z/VSE? >>> >>> >>> -- For LINUX-390 subscribe / signoff / archive access instructions, >>> send email to lists...@vm.marist.edu with the message: INFO >>> LINUX-390 >> or visit >>> http://www.marist.edu/htbin/wlvindex?LINUX-390 >> -- >> Martha McConaghy >> Marist: System Architect/Technical Lead >> SHARE: Vice President >> Marist College IT >> Poughkeepsie, NY 12601 >> >> - >> - For LINUX-390 subscribe / signoff / archive access instructions, >> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 >> or visit >> http://www.marist.edu/htbin/wlvindex?LINUX-390 >> > > -- > For LINUX-390 subscribe / signoff / archive access instructions, send > email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
SLES 12 on z/VM. Should not matter to the clients, though. We monitor z/OS, z/VM, hundreds of zLinux and hundreds of ESX based Linux/Windows. Also monitor all network equipment. Martha On 1/23/2019 3:29 PM, Tom Huegel wrote: Martha, What platform do you run Xymon server on? Thanks - Tom On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: We use Xymon to monitor all of our servers, regardless of platform. I have not done VSE as we don't have it. However, there is a client that works on z/OS, which we use a lot. It probably can be modified to work on VSE. I think Rich Smrcina wrote it. Martha On 1/23/2019 3:15 PM, Tom Huegel wrote: Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
Martha, What platform do you run Xymon server on? Thanks - Tom On Wed, Jan 23, 2019 at 2:27 PM Martha McConaghy < martha.mccona...@marist.edu> wrote: > We use Xymon to monitor all of our servers, regardless of platform. I > have not done VSE as we don't have it. However, there is a client that > works on z/OS, which we use a lot. It probably can be modified to work > on VSE. I think Rich Smrcina wrote it. > > Martha > > On 1/23/2019 3:15 PM, Tom Huegel wrote: > > Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's > ie > > z/VSE? > > > > -- > > For LINUX-390 subscribe / signoff / archive access instructions, > > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 > or visit > > http://www.marist.edu/htbin/wlvindex?LINUX-390 > > -- > Martha McConaghy > Marist: System Architect/Technical Lead > SHARE: Vice President > Marist College IT > Poughkeepsie, NY 12601 > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or > visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Xymon
We use Xymon to monitor all of our servers, regardless of platform. I have not done VSE as we don't have it. However, there is a client that works on z/OS, which we use a lot. It probably can be modified to work on VSE. I think Rich Smrcina wrote it. Martha On 1/23/2019 3:15 PM, Tom Huegel wrote: Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Vice President Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Xymon
Just wondering if anyone has used Xymon in z/LINUX to monitor other OS's ie z/VSE? -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: xymon on zLinux anyone?
http://download.sinenomine.net/epel/epel-7/s390x/xymon-4.3.28-2.el7.s390x.rpm http://download.sinenomine.net/epel/epel-7/s390x/xymon-client-4.3.28-2.el7.s390x.rpm Neale On 7/24/18, 16:00, "Linux on 390 Port on behalf of Juha Vuori" wrote: Hi, Here are Richard's original clients https://sites.google.com/site/rsmrcina/xymonclients and here is the development branch I've been trying to maintain https://savannah.nongnu.org/projects/zxymon/ Not much enhancements there, though.. the fact of a day contains only 24 hours has been a severe limiting factor during my last working years.. Btw, I always compile my Xymon servers - installs and upgrades, nothing special on zLinux there. Xymon base OSS product is currently maintained by Japheth Cleaver, afaik. Maybe discussions about Xymon deployment methods would be more useful in Xymon's own discussion list: http://lists.xymon.com/mailman/listinfo/xymon I think the project needs all the good support it could get.. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: xymon on zLinux anyone?
Hi, Here are Richard's original clients https://sites.google.com/site/rsmrcina/xymonclients and here is the development branch I've been trying to maintain https://savannah.nongnu.org/projects/zxymon/ Not much enhancements there, though.. the fact of a day contains only 24 hours has been a severe limiting factor during my last working years.. Btw, I always compile my Xymon servers - installs and upgrades, nothing special on zLinux there. Xymon base OSS product is currently maintained by Japheth Cleaver, afaik. Maybe discussions about Xymon deployment methods would be more useful in Xymon's own discussion list: http://lists.xymon.com/mailman/listinfo/xymon I think the project needs all the good support it could get.. -- Best regards, Juha Vuori On 24.07.2018 18:58, Dave Jones wrote: Hi, all. Where might one find these z/VM and z/OS clients for xymon? Thanks and have a good one. DJ --- DAVID JONES | MANAGING DIRECTOR FOR ZSYSTEMS SERVICES | z/VM, Linux, and Cloud 703.237.7370 (Office) | 281.578.7544 (CELL) INFORMATION TECHNOLOGY COMPANY [1] On 07.24.2018 6:59 AM, Frank M. Ramaekers wrote: Yes, thanks Martha, I'm aware of xymon. I currently have the server running on an old CentOS 5 and need to migrated it to a zLinux (ClefOS). I was hoping there was a RPM for it. Frank M. Ramaekers Jr. -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Martha McConaghy Sent: Tuesday, July 24, 2018 8:38 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: xymon on zLinux anyone? We use Xymon a great deal, it monitors all of our servers and network equipment (several thousand items). We run the server on zLinux (SLES) and the client runs just about anywhere. There are even clients for z/VM and z/OS (thanks Rich!). Its all PhP based, so I don't think an RPM is necessary. (I haven't done the install in a long time, someone else in our group does that.) Its definitely not specific to any version of Linux. As long as you have Apache and PhP installed, it should run on Clef. Martha On 7/24/2018 8:43 AM, Frank M. Ramaekers wrote: Anyone doing xymon on zLinux? Know where a RPM for ClefOS might be found? Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | American Income Life Insurance Company | 254-761-6649 (732-6649) -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=wZlIwjKNki2KSWY4T9X_dvz_YnR6HQrvFxH52DpRmY8= -- For more information on Linux on System z, visit https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=qyEudknzt5RmGREmWRWzg7D2Gxo44faITHO0dylrJwo= -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Director of Conference Operations Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=wZlIwjKNki2KSWY4T9X_dvz_YnR6HQrvFxH52DpRmY8= -- For more information on Linux on System z, visit https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=qyEudknzt5RmGREmWRWzg7D2Gxo44faITHO0dylrJwo= -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: xymon on zLinux anyone?
Hi, all. Where might one find these z/VM and z/OS clients for xymon? Thanks and have a good one. DJ --- DAVID JONES | MANAGING DIRECTOR FOR ZSYSTEMS SERVICES | z/VM, Linux, and Cloud 703.237.7370 (Office) | 281.578.7544 (CELL) INFORMATION TECHNOLOGY COMPANY [1] On 07.24.2018 6:59 AM, Frank M. Ramaekers wrote: > Yes, thanks Martha, I'm aware of xymon. I currently have the server running > on an old CentOS 5 and need to migrated it to a zLinux (ClefOS). I was > hoping there was a RPM for it. > > Frank M. Ramaekers Jr. > > -Original Message- > From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Martha > McConaghy > Sent: Tuesday, July 24, 2018 8:38 AM > To: LINUX-390@VM.MARIST.EDU > Subject: Re: xymon on zLinux anyone? > > We use Xymon a great deal, it monitors all of our servers and network > equipment (several thousand items). We run the server on zLinux (SLES) and > the client runs just about anywhere. There are even clients for z/VM and > z/OS (thanks Rich!). Its all PhP based, so I don't think an RPM is > necessary. (I haven't done the install in a long time, someone else in our > group does that.) Its definitely not specific to any version of Linux. As > long as you have Apache and PhP installed, it should run on Clef. > > Martha > > On 7/24/2018 8:43 AM, Frank M. Ramaekers wrote: > >> Anyone doing xymon on zLinux? Know where a RPM for ClefOS might be found? >> >> Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | >> American Income Life Insurance Company | 254-761-6649 (732-6649) >> >> -- >> This message contains information which is privileged and confidential and >> is solely for the use of the intended recipient. If you are not the intended >> recipient, be aware that any review, disclosure, copying, distribution, or >> use of the contents of this message is strictly prohibited. If you have >> received this in error, please destroy it immediately and notify us at >> privacy...@torchmarkcorp.com. >> >> -- >> For LINUX-390 subscribe / signoff / archive access instructions, >> send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or >> visit >> https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=wZlIwjKNki2KSWY4T9X_dvz_YnR6HQrvFxH52DpRmY8= >> -- >> For more information on Linux on System z, visit >> https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=qyEudknzt5RmGREmWRWzg7D2Gxo44faITHO0dylrJwo= > > -- > Martha McConaghy > Marist: System Architect/Technical Lead > SHARE: Director of Conference Operations > Marist College IT > Poughkeepsie, NY 12601 > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=wZlIwjKNki2KSWY4T9X_dvz_YnR6HQrvFxH52DpRmY8= > -- > For more information on Linux on System z, visit > https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=qyEudknzt5RmGREmWRWzg7D2Gxo44faITHO0dylrJwo= > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > http://www.marist.edu/htbin/wlvindex?LINUX-390 > -- > For more information on Linux on System z, visit > http://wiki.linuxvm.org/ Links: -- [1] http://www.itconline.com/ -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: xymon on zLinux anyone?
On Tue, 24 Jul 2018, R P Herrold wrote: > form, as it locks in potentially vulnerable library decisions > (I see some compression / decompression libraries which have > had CVE type vulnerabilities in them, so this matters -- a > stale 'carried in the tarball' lzo [YIKES], a stale 'carried > in the tarball' l4 [YIKES], zlib, more with unpackaged perl heh -- one of the holes is well enough known, and the code stale and unfixed, that the GCC suite and glibc, know to warn during a build: + make V=1 PKGBUILD=1 client compression.c: In function 'compress_message_to_strbuffer': compression.c:352:3: warning: 'LZ4_compressHC' is deprecated (declared at /usr/include/lz4hc.h:203): use LZ4_compress_HC() instead [-Wdeprecated-declarations] newsize = LZ4_compressHC(datasrc, STRBUFEND(deststrbuffer), datasz); ^ compression.c:364:3: warning: 'LZ4_compress' is deprecated (declared at /usr/include/lz4.h:431): use LZ4_compress_default() instead [-Wdeprecated-declarations] newsize = LZ4_compress(datasrc, STRBUFEND(deststrbuffer), datasz); ^ -- Russ herrold -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: xymon on zLinux anyone?
On Tue, 24 Jul 2018, Martha McConaghy wrote: > We use Xymon a great deal, it monitors all of our servers and network > equipment (several thousand items). We run the server on zLinux (SLES) and > the client runs just about anywhere. There are even clients for z/VM and z/OS > (thanks Rich!). It looks as though a non 'package system mediated' build and setup process is described at: http://xymon.sourceforge.net/xymon/help/install.html#commonsystems It appears to do an 'interview' as part of the configuration process, both as to the build path decisions, and the hostname and network ports to be listened to, rather than relying on abstraction and later configuration Also a bunch of hard linking rather than relative symlinking in that package's manual setup, which is usually very poor form, as it locks in potentially vulnerable library decisions (I see some compression / decompression libraries which have had CVE type vulnerabilities in them, so this matters -- a stale 'carried in the tarball' lzo [YIKES], a stale 'carried in the tarball' l4 [YIKES], zlib, more with unpackaged perl modules [YIKES]) The _problem_ with this approach is that one can unknowingly carry around exploitable libraries rather than have the benefit one's upsteam's maintenance, when a perl module or a library shows up in the security issues lists. The crackers read these lists and more daily these just as I do [Credit card data security matters --- EDS is a big player in this market as well and I was ** shocked ** at the lack of awareness of such issues when I was dealing with them; the old Sterling Software had holes which I found as well, in the pre IBM days]. Anyway, the crackers can use stale and vulnerable matter as a way to prise open an entry to a remote system. I 'cc' the 'whitehat' exploit scanner developers 'soldier of fortran' and 'bigendiansmalls' so they can add coverage to their penetration testing tool kit Also there is not at the SF reference site a set of instructions for systemd so some 'cribbing' from the work of others may be needed there. Why is it not in RawHide / Fedoraproject already, I wonder ... a license problem (the old BB had that issue when it was taken non-FOSS > On 7/24/2018 8:43 AM, Frank M. Ramaekers wrote: > > Anyone doing xymon on zLinux? Know where a RPM for ClefOS might be found? Long ago and far away I ran the old Big Brother, which being based on lots of early perl scripts, was somewhat loady. I was unaware of this package, as I run the FOSS Nagios, which plays well with SNMP, and had not needed to look further Let me look at license matters and if I can solve it for an acceptable packaging it for ClefOS. All the build Requirements are present in ClefOS, and I have a build solved already which I have rebuild under s390x /home/herrold/rpmbuild/SRPMS/xymon-4.3.28-1.orc7.src.rpm Wrote: /home/herrold/rpmbuild/RPMS/s390x/xymon-4.3.28-1.el7.s390x.rpm Wrote: /home/herrold/rpmbuild/RPMS/s390x/xymon-client-4.3.28-1.el7.s390x.rpm Wrote: /home/herrold/rpmbuild/RPMS/s390x/xymon-client-local-4.3.28-1.el7.s390x.rpm Wrote: /home/herrold/rpmbuild/RPMS/s390x/xymon-devel-4.3.28-1.el7.s390x.rpm Wrote: /home/herrold/rpmbuild/RPMS/s390x/xymon-tools-4.3.28-1.el7.s390x.rpm Wrote: /home/herrold/rpmbuild/RPMS/s390x/xymon-debuginfo-4.3.28-1.el7.s390x.rpm Although I do NOT like some of its choices from a system security POV. a copy of my WIP SRPM is up at: ftp://ftp.owlriver.com/pub/local/ORC/xymon/ but I will have a better and safer and more maintainable one later -- Russ herrold -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: xymon on zLinux anyone?
Yes, thanks Martha, I'm aware of xymon. I currently have the server running on an old CentOS 5 and need to migrated it to a zLinux (ClefOS). I was hoping there was a RPM for it. Frank M. Ramaekers Jr. -Original Message- From: Linux on 390 Port [mailto:LINUX-390@VM.MARIST.EDU] On Behalf Of Martha McConaghy Sent: Tuesday, July 24, 2018 8:38 AM To: LINUX-390@VM.MARIST.EDU Subject: Re: xymon on zLinux anyone? We use Xymon a great deal, it monitors all of our servers and network equipment (several thousand items). We run the server on zLinux (SLES) and the client runs just about anywhere. There are even clients for z/VM and z/OS (thanks Rich!). Its all PhP based, so I don't think an RPM is necessary. (I haven't done the install in a long time, someone else in our group does that.) Its definitely not specific to any version of Linux. As long as you have Apache and PhP installed, it should run on Clef. Martha On 7/24/2018 8:43 AM, Frank M. Ramaekers wrote: > Anyone doing xymon on zLinux? Know where a RPM for ClefOS might be found? > > Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | > American Income Life Insurance Company | 254-761-6649 (732-6649) > > -- > This message contains information which is privileged and confidential and is > solely for the use of the intended recipient. If you are not the intended > recipient, be aware that any review, disclosure, copying, distribution, or > use of the contents of this message is strictly prohibited. If you have > received this in error, please destroy it immediately and notify us at > privacy...@torchmarkcorp.com. > > -- > For LINUX-390 subscribe / signoff / archive access instructions, > send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit > https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=wZlIwjKNki2KSWY4T9X_dvz_YnR6HQrvFxH52DpRmY8= > -- > For more information on Linux on System z, visit > https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=qyEudknzt5RmGREmWRWzg7D2Gxo44faITHO0dylrJwo= -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Director of Conference Operations Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit https://urldefense.proofpoint.com/v2/url?u=http-3A__www.marist.edu_htbin_wlvindex-3FLINUX-2D390=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=wZlIwjKNki2KSWY4T9X_dvz_YnR6HQrvFxH52DpRmY8= -- For more information on Linux on System z, visit https://urldefense.proofpoint.com/v2/url?u=http-3A__wiki.linuxvm.org_=DwIFaQ=laxeQK7vPmHfouIIPNyCfbQd49eK3u00U8Jdo0RFvts=EOaM1MkMLG24_TOy4m7EdDoX0CP9-c0YJ2kTdeagcqQ=c_RgF8_T1wnFspAWgSt5j4Nc4SbE1mJlh0JdCVAKxcM=qyEudknzt5RmGREmWRWzg7D2Gxo44faITHO0dylrJwo= -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
Re: xymon on zLinux anyone?
We use Xymon a great deal, it monitors all of our servers and network equipment (several thousand items). We run the server on zLinux (SLES) and the client runs just about anywhere. There are even clients for z/VM and z/OS (thanks Rich!). Its all PhP based, so I don't think an RPM is necessary. (I haven't done the install in a long time, someone else in our group does that.) Its definitely not specific to any version of Linux. As long as you have Apache and PhP installed, it should run on Clef. Martha On 7/24/2018 8:43 AM, Frank M. Ramaekers wrote: Anyone doing xymon on zLinux? Know where a RPM for ClefOS might be found? Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | American Income Life Insurance Company | 254-761-6649 (732-6649) -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/ -- Martha McConaghy Marist: System Architect/Technical Lead SHARE: Director of Conference Operations Marist College IT Poughkeepsie, NY 12601 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
xymon on zLinux anyone?
Anyone doing xymon on zLinux? Know where a RPM for ClefOS might be found? Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | American Income Life Insurance Company | 254-761-6649 (732-6649) -- This message contains information which is privileged and confidential and is solely for the use of the intended recipient. If you are not the intended recipient, be aware that any review, disclosure, copying, distribution, or use of the contents of this message is strictly prohibited. If you have received this in error, please destroy it immediately and notify us at privacy...@torchmarkcorp.com. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For more information on Linux on System z, visit http://wiki.linuxvm.org/
XYMON CPU Load vs CPU % utilization
I have xymon installed on several servers and it appears that the only thing I can monitor is CPU LOAD which is different from CPU % utilization. Has anyone found a way to get CPU Utilization instead of CPU Load? Thanks Jim P.
xymon 1.3 client for z/VM
I've got the xymon 1.3 client running on z/VM 5.3 and 5.4 systems. Some *very* nice work by Rich Smrcina and Tom Kern. Thanks, gents. There is one small issue in exec HOBVMDSK: Original code looks like this, starting around line 99: if right(total,1)='K' then total=left(total,length(total-1)) * 1024 if right(used,1)='K' then used=left(used,length(used-1)) * 1024 if right(high,1)='K' then high=left(high,length(high-1)) * 1024 It should look like this: if right(total,1)='K' then total=left(total,length(total)-1) * 1024 if right(used,1)='K' then used=left(used,length(used)-1) * 1024 if right(high,1)='K' then high=left(high,length(high)-1) * 1024 Patrick Carroll | Enterprise Architect L.L.Bean, Inc.(r) | Double L St. | Freeport ME 04033 http://www.llbean.com http://www.llbean.com/ | pcarr...@llbean.com | 207.552.2426 CONFIDENTIALITY NOTICE: This e-mail and any attachments may contain confidential information that is legally privileged. The information is solely for the use of the intended recipient(s). Any disclosure, copying, distribution, or other use of this information is strictly prohibited. If you have received this e-mail in error, please notify the sender by return e-mail and delete this message. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: xymon 1.3 client for z/VM
Thomas provided the original fix for this, but I'll take full credit for biffing up the parens. I appreciate the update, Pat. Pat Carroll wrote: I've got the xymon 1.3 client running on z/VM 5.3 and 5.4 systems. Some *very* nice work by Rich Smrcina and Tom Kern. Thanks, gents. There is one small issue in exec HOBVMDSK: Original code looks like this, starting around line 99: ... -- Rich Smrcina Phone: 414-491-6001 http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390