Re: [linux-dvb] Hauppauge Nova-T-USB2 define Remote Control Keys
Is there a way to define the remote control keys? At time only the number and arrow keys are working. Hi, have you tried irrecord? irrecord is from lirc, if i right? I don't have lirc installed because, the kerneldriver for the device provides the romote control to act as a input device. Everything works out of the box, but the device is a second edition and there some changes i think. Thanks anyway mark ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] FusionHDTV Dual Digital zl10353 / dee1601 tuning
Thanks for the reply Peter, Unfortunately I think the new mac pros only have PCIe slots - still tempted though! Good to know its not a 64bit issue. I'll try to work through the code - guess I could always buy a second tuner card... Steve ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] DiB3000MC rewritten and MT2060 is ready to go into main
Hi Matthieu, I committed a modification to finally fix it. regards, Patrick. -- Mail: [EMAIL PROTECTED] WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ On Sun, 20 Aug 2006, matthieu castet wrote: Patrick Boettcher wrote: Hi Matthieu, I added something to my repository which should fix it: Can you give it a try: http://linuxtv.org/hg/~pb/v4l-dvb The patch doesn't work : in OUTMODE_MPEG2_FIFO you still erase the pid parse bit. Here a patch that works. Unfortunately on french tnt, the bandwidth share on a transponder is not usb1 friendly : - the transponder bandwidth is 24 Mbps - there are 5 or 6 channels per transponder (it make an average 4Mbps bandwidth) Instead of having all channel near the average 4Mbps, they put the average lower (2.5-3 Mbps) and the extra bandwidth is given (sometimes randomly) to some channels. This make peak 7 Mbps on some channels [1] and usb1 mode doesn't seem to support such bandwidth (may be if iso were used, it could have worked). Some transponder are more usb1 friendly and put the extra bits in pid 8191 (up to 4-5 Mbps)... [1] -PID--FREQ-BANDWIDTH-BANDWIDTH- 9 p/s 1 kb/s14 kbit 0017 0 p/s 0 kb/s 1 kbit 001810 p/s 1 kb/s16 kbit 0021 1 p/s 0 kb/s 2 kbit 0110 9 p/s 1 kb/s14 kbit 0120 2156 p/s 395 kb/s 3242 kbit 0130 132 p/s24 kb/s 198 kbit 0140 2 p/s 0 kb/s 4 kbit 0210 9 p/s 1 kb/s14 kbit 0220 2992 p/s 549 kb/s 4499 kbit 0230 131 p/s24 kb/s 197 kbit 0240 1 p/s 0 kb/s 2 kbit 0310 9 p/s 1 kb/s14 kbit 0320 4785 p/s 878 kb/s 7197 kbit 0330 131 p/s24 kb/s 197 kbit 0340 2 p/s 0 kb/s 4 kbit 0410 9 p/s 1 kb/s14 kbit 0420 1458 p/s 267 kb/s 2193 kbit 0430 132 p/s24 kb/s 198 kbit 0440 2 p/s 0 kb/s 4 kbit 0510 9 p/s 1 kb/s14 kbit 0520 1743 p/s 320 kb/s 2622 kbit 0530 132 p/s24 kb/s 198 kbit 0531 132 p/s24 kb/s 198 kbit 0541 2 p/s 0 kb/s 4 kbit 0542 3 p/s 0 kb/s 5 kbit 0610 9 p/s 1 kb/s14 kbit 0620 1419 p/s 260 kb/s 2134 kbit 0630 132 p/s24 kb/s 198 kbit 0640 1 p/s 0 kb/s 2 kbit 0660 8 p/s 1 kb/s13 kbit 1010 9 p/s 1 kb/s14 kbit 8191 926 p/s 170 kb/s 1393 kbit 8192 16540 p/s 3036 kb/s 24877 kbit Signed-off-by: Matthieu CASTET [EMAIL PROTECTED] ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] FusionHDTV Dual Digital zl10353 / dee1601 tuning
Another post! Seems I was wrong about the usb tuner not spitting out the mpeg stream - using dvbstream I can record both streams simultaneous! sweet! Now just need to install mythtv (and find something interesting to watch in HD here in Perth) Steve ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Re: MPEG from stream file
В сообщении от 20 августа 2006 13:25 Philip Gartrell-Mills написал(a):
I use this software
http://www.doom9.org/index.html?/DigiTV/projectx-fullguide.htm
to convert .ts to mpeg
I hope that helps.
It's probablly not to this maillist, but...
ProjectX can't process TS to PS, the log below.
and main screen of ProjectX show me a message
cannot find sequence header
Any ideas?
session infos
21 Август 2006 г. 17:13:25 EEST
ProjectX 0.90.4.00 (30.03.2006)
- working with collection 0
- save normal log file
- write all video data
- write all other data
- PVA: strictly specs. for audio streams
- VOB: determine diff. Cell timelines
- TS: ignore scrambled packets
- TS: enhanced search for open packets
- TS: join file segments (of Dreambox®)
- TS: generate PMT stream dependent
- get only enclosed PES/TS packets
- concatenate different recordings
- ensure 1st PES-packet start with video
- generate PCR/SCR from PTS
- write output files to: '/home/fnm/TS'
quick info
- Input File 0: '/home/fnm/TS/ORT-international.ts' (33 697 792 bytes)
- Filetype is TS (generic PES Container)
- make a TS
- Service ID 0xE1
- PMT 0x7F2 refers to these usable streams:
Video:
PID: 0xAA
Audio:
PID: 0xAD[PD]
PID: 0xAB
Teletext:
n/a
Subpict.:
n/a
- special PIDs for searching defined: { 0x84E }
packs: 0 15% 5242944
! no IDs found! ..use fixed PMT
summary of created media files:
= 0 bytes written...
- we have 1 warnings/errors.
end of quick info
- Input File 0: '/home/fnm/TS/ORT-international.ts' (33 697 792 bytes)
- Filetype is TS (generic PES Container)
- make a TS
- Service ID 0xE1
- PMT 0x7F2 refers to these usable streams:
Video:
PID: 0xAA
Audio:
PID: 0xAD[PD]
PID: 0xAB
Teletext:
n/a
Subpict.:
n/a
- special PIDs for searching defined: { 0x84E }
! incomplete ts packet at EOF detected @ 33697684
packs: 0 100% 33697792
summary of created media files:
= 0 bytes written...
- we have 2 warnings/errors.
--
Best regards, Nick Fedchik
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Re: MPEG from stream file
Nick Fedchik wrote: В сообщении от 20 августа 2006 13:25 Philip Gartrell-Mills написал(a): I use this software http://www.doom9.org/index.html?/DigiTV/projectx-fullguide.htm to convert .ts to mpeg I hope that helps. It's probablly not to this maillist, but... ProjectX can't process TS to PS, the log below. and main screen of ProjectX show me a message cannot find sequence header Any ideas? maybe the content is simply encrypted or broken. Post a link to a sample, please -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Conto Arancio: 3.50% per tutto il 2006! Scopri come Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?midP42d!-8 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Re: MPEG from stream file
В сообщении от 21 августа 2006 17:16 Nico Sabbi написал(a): ProjectX can't process TS to PS, the log below. and main screen of ProjectX show me a message cannot find sequence header Any ideas? maybe the content is simply encrypted or broken. Post a link to a sample, please The files grabbed by gnutv, 30 or 60 sec each ftp://213.186.207.66/TS/ channels.conf - in the same dir -- Best regards, Nick Fedchik ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Re: MPEG from stream file
By the way... maybe the content is simply encrypted or broken. Post a link to a sample, please [EMAIL PROTECTED]:/home/ftp/TS# /usr/src/dvb-apps-997424a1799e/util/gnutv/gnutv -out file TV4.ts -timeout 30 -channels channels.conf TV4 Using frontend DST DVB-S, type DVB-S Problem retrieving frontend information: Operation not supported status SCVYL | signal 3d00 | snr 1c00 | ber | unc | FE_HAS_LOCK [EMAIL PROTECTED]:/home/ftp/TS# file TV4.ts TV4.ts: MPEG transport stream data [EMAIL PROTECTED]:~/TS$ mplayer TV4.ts MPlayer 1.0pre8-4.0.3 (C) 2000-2006 MPlayer Team CPU: Genuine Intel(R) CPU T2300 @ 1.66GHz (Family: 6, Model: 14, Stepping: 8) CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2 Linux RTC init error in ioctl (rtc_irqp_set 1024): Permission denied Try adding echo 1024 /proc/sys/dev/rtc/max-user-freq to your system startup scripts. Playing TV4.ts. TS file format detected. DEMUX OPEN, AUDIO_ID: -1, VIDEO_ID: -1, SUBTITLE_ID: -2, PROBING UP TO 200, PROG: 0 VIDEO MPEG2(pid=8091)AUDIO MPA(pid=8092) NO SUBS (yet)! PROGRAM N. 8090 Opened TS demuxer, audio: 50(pid 8092), video: 1002(pid 8091)...POS=564, PROBE=200 parse_es: could not sync video stream! MPEG: FATAL: EOF while searching for sequence header. Video: Cannot read properties. == Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 ADecoder init failed :( ADecoder init failed :( Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 22050 Hz, 2 ch, s16le, 224.0 kbit/31.75% (ratio: 28000-88200) Selected audio codec: [ffmp2] afm: ffmpeg (FFmpeg MPEG layer-1 and layer-2 audio decoder) == AO: [oss] 22050Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: -0.0 (unknown) of 512.4 (08:32.4) ??,?% Exiting... (End of file) -- Best regards, Nick Fedchik ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Kernel bug using kernel 2.6.17
I have problems with kernels newer that 2.6.16 and vdr.
With kernel 2.6.17.9 see atached log1.
With kernel 2.6.18-rc4 with kernels drivers and with last mercurial drivers
see log2.
After that errors I need to reboot.
Thanks.
Jose Alberto
El Lunes, 3 de Julio de 2006 18:44, Jose Alberto Reguero escribió:
I have this kernel bug when I update to kernel 2.6.17
I have no problem with 2.6.16
Thanks.
Jose Alberto
Aug 21 16:16:32 jar kernel: general protection fault: [1] SMP
Aug 21 16:16:32 jar kernel: CPU 0
Aug 21 16:16:32 jar kernel: Modules linked in: ppdev nfsd exportfs lockd
nfs_acl ipv6 autofs4 w83627hf hwmon_vid hwmon i2c_isa hidp l2cap bluetooth
sunrpc cpufreq_ondemand vfat fat dm_mirror dm_mod video button battery ac
parport_pc lp parport saa7134_dvb mt352 video_buf_dvb dvb_core nxt200x dvb_pll
tda1004x snd_via82xx_modem usblp snd_via82xx saa7134 gameport video_buf
snd_ac97_codec compat_ioctl32 snd_ac97_bus v4l2_common snd_mpu401_uart
snd_rawmidi v4l1_compat snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
ir_kbd_i2c nvidia snd_seq_device ir_common sg ide_cd i2c_viapro floppy skge
i2c_core ehci_hcd snd_pcm_oss snd_mixer_oss cdrom serio_raw ohci1394 ieee1394
snd_pcm uhci_hcd videodev snd_timer snd soundcore snd_page_alloc ext3 jbd
sata_promise sata_via libata sd_mod scsi_mod
Aug 21 16:16:32 jar kernel: Pid: 25510, comm: vdr Tainted: P 2.6.17.9 #1
Aug 21 16:16:32 jar kernel: RIP: 0010:[8024b92a]
8024b92a{try_to_wake_up+45}
Aug 21 16:16:32 jar kernel: RSP: 0018:81002f4f58f8 EFLAGS: 00010092
Aug 21 16:16:32 jar kernel: RAX: 6b6b6b6b6b6b6b6b RBX: 8073a480 RCX:
Aug 21 16:16:32 jar kernel: RDX: RSI: 000f RDI:
81001a6eb080
Aug 21 16:16:32 jar kernel: RBP: 81002f4f5978 R08: R09:
81002f4f5908
Aug 21 16:16:32 jar kernel: R10: 81003c77c3f8 R11: 81003c77c148 R12:
000f
Aug 21 16:16:32 jar kernel: R13: R14: 81001a6eb080 R15:
8073a480
Aug 21 16:16:32 jar kernel: FS: 41001940(0063)
GS:806d7000() knlGS:f732f6d0
Aug 21 16:16:32 jar kernel: CS: 0010 DS: ES: CR0: 8005003b
Aug 21 16:16:32 jar kernel: CR2: 2aaac000 CR3: 3ddd3000 CR4:
06e0
Aug 21 16:16:32 jar kernel: Process vdr (pid: 25510, threadinfo
81002f4f4000, task 810031987810)
Aug 21 16:16:32 jar kernel: Stack: 2f4f5908 81002f4f5918
81002f4f5968 0292
Aug 21 16:16:32 jar kernel:
Aug 21 16:16:32 jar kernel: 802a2ee1
Aug 21 16:16:32 jar kernel: Call Trace:
802a2ee1{debug_mutex_add_waiter+152}
Aug 21 16:16:32 jar kernel:8028c360{wake_up_process+16}
802a023a{kthread_stop_sem+129}
Aug 21 16:16:32 jar kernel:802a0296{kthread_stop+11}
88967331{:video_buf_dvb:videobuf_dvb_stop_feed+77}
Aug 21 16:16:32 jar kernel:
88948917{:dvb_core:dmx_section_feed_stop_filtering+86}
Aug 21 16:16:32 jar kernel:
88946f22{:dvb_core:dvb_dmxdev_feed_stop+96}
Aug 21 16:16:32 jar kernel:
88946f69{:dvb_core:dvb_dmxdev_filter_stop+52}
Aug 21 16:16:32 jar kernel:
88947025{:dvb_core:dvb_demux_release+103}
Aug 21 16:16:32 jar kernel:80212bf5{__fput+196}
8022fc03{fput+20}
Aug 21 16:16:32 jar kernel:802d45e6{free_poll_entry+33}
8021bd80{poll_freewait+42}
Aug 21 16:16:32 jar kernel:8023292b{do_sys_poll+1002}
8021fc90{__pollwait+0}
Aug 21 16:16:32 jar kernel:8028c341{default_wake_function+0}
8028c341{default_wake_function+0}
Aug 21 16:16:32 jar last message repeated 2 times
Aug 21 16:16:32 jar kernel:8028c341{default_wake_function+0}
889461d5{:dvb_core:dvb_usercopy+309}
Aug 21 16:16:32 jar kernel:
889474e5{:dvb_core:dvb_demux_do_ioctl+0}
802b2f7b{audit_syscall_entry+316}
Aug 21 16:16:32 jar kernel:8025159f{sys_poll+59}
80263201{tracesys+209}
Aug 21 16:16:32 jar kernel:
Aug 21 16:16:32 jar kernel: Code: 8b 40 18 48 8b 04 c5 20 90 6f 80 4c 03 78 08
4c 89 ff e8 03
Aug 21 16:16:32 jar kernel: RIP 8024b92a{try_to_wake_up+45} RSP
81002f4f58f8
Aug 21 16:16:32 jar kernel: 3BUG: sleeping function called from invalid
context at include/linux/rwsem.h:43
Aug 21 16:16:32 jar kernel: in_atomic():0, irqs_disabled():1
Aug 21 16:16:32 jar kernel:
Aug 21 16:16:32 jar kernel: Call Trace: 8020b7f6{__might_sleep+178}
8029a5fa{blocking_notifier_call_chain+39}
Aug 21 16:16:32 jar kernel:80291b5e{profile_task_exit+21}
8021636e{do_exit+37}
Aug 21 16:16:32 jar kernel:802709e6{kernel_math_error+0}
8026aa2f{do_general_protection+261}
Aug 21 16:16:32
Re: [linux-dvb] Re: MPEG from stream file
Nick Fedchik wrote: В сообщении от 21 августа 2006 17:16 Nico Sabbi написал(a): ProjectX can't process TS to PS, the log below. and main screen of ProjectX show me a message cannot find sequence header Any ideas? maybe the content is simply encrypted or broken. Post a link to a sample, please The files grabbed by gnutv, 30 or 60 sec each ftp://213.186.207.66/TS/ channels.conf - in the same dir they must be encrypted (there's a 8090 program that reportedly contains audio and video, but in the dump of the video stream there's not the slightest sign of a sequence header) -- Email.it, the professional e-mail, gratis per te: http://www.email.it/f Sponsor: Prestiti Online. Scopri subito se sei finanziabile. in 24 ore senza spese nй anticipi, clicca qui * Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid)08d!-8 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] encrypted stream
В сообщении от 21 августа 2006 18:23 Nico Sabbi написал(a): The files grabbed by gnutv, 30 or 60 sec each ftp://213.186.207.66/TS/ channels.conf - in the same dir they must be encrypted (there's a 8090 program that reportedly contains audio and video, but in the dump of the video stream there's not the slightest sign of a sequence header) How can I check is the channel encrypted or not? My hardware is Twinhan 1025 -- Best regards, Nick Fedchik ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] encrypted stream
Le Lundi 21 Août 2006 17:39, Nick Fedchik a écrit : В сообщении от 21 августа 2006 18:23 Nico Sabbi написал(a): The files grabbed by gnutv, 30 or 60 sec each ftp://213.186.207.66/TS/ channels.conf - in the same dir they must be encrypted (there's a 8090 program that reportedly contains audio and video, but in the dump of the video stream there's not the slightest sign of a sequence header) How can I check is the channel encrypted or not? My hardware is Twinhan 1025 xine --verbose=255 TV4.ts .. demux_ts: selected videoPid is scrambled; skipping... . -- Christophe Thommeret ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] DiB3000MC rewritten and MT2060 is ready to go into main
Patrick Boettcher wrote: Hi Matthieu, I committed a modification to finally fix it. Thanks, but with our fix does other modes will still works : you don't set anymore bit 1 ? Do you think there is a way to better handle hight bandwidth stream (usb urb tunning, some register tunning) or it is hopeless with usb1 ? Matthieu ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] uk-Nottingham initial scan file
From anonymous user. -- Christophe Thommeret # Nottingham (Kimberley, Nottinghamshire) # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy T 53800 8MHz 3/4 3/4 QAM16 2k 1/32 NONE T 61800 8MHz 3/4 3/4 QAM16 2k 1/32 NONE T 73000 8MHz 2/3 1/2 QAM64 2k 1/32 NONE T 77800 8MHz 3/4 3/4 QAM16 2k 1/32 NONE T 81000 8MHz 3/4 3/4 QAM16 2k 1/32 NONE T 84200 8MHz 2/3 1/2 QAM64 2k 1/32 NONE___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] [PATCH] cx88: IR Support for Winfast DTV1000 T
Adam Zammit wrote: Hello, Can someone please verify that this patch works for them. Included is and update to the keys for the Y04G0004 controller that came in the box with my Winfast DTV1000 T (purchased in Australia). The patch was written against 2.6.17.8 vanilla. Adam, Thank you for the patch... The changeset looks good, and I would be happy to apply this for you if you would respond to this email with your sign-off, in the form: Signed-off-by: Your Name [EMAIL PROTECTED] Thanks, Michael Krufky ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] [PATCH] Fix the output from scan utility for vdr
Hi,
the scan utility from dvb-apps creates a wrong channel.conf for vdr. Vdr uses
the original network id instead of the
network id. The attached patch does fix this little problem.
Signed-of-by: Hartmut Birr [EMAIL PROTECTED]
- Hartmut
--- a/util/scan/scan.c Sat Aug 12 13:29:37 2006 +0100
+++ b/util/scan/scan.c Mon Aug 21 19:56:16 2006 +0200
@@ -130,6 +130,7 @@ struct transponder {
struct list_head list;
struct list_head services;
int network_id;
+ int original_network_id;
int transport_stream_id;
enum fe_type type;
struct dvb_frontend_parameters param;
@@ -236,6 +237,7 @@ static void copy_transponder(struct tran
static void copy_transponder(struct transponder *d, struct transponder *s)
{
d-network_id = s-network_id;
+ d-original_network_id = s-original_network_id;
d-transport_stream_id = s-transport_stream_id;
d-type = s-type;
memcpy(d-param, s-param, sizeof(d-param));
@@ -860,6 +862,7 @@ static void parse_nit (const unsigned ch
memset(tn, 0, sizeof(tn));
tn.type = -1;
tn.network_id = network_id;
+ tn.original_network_id = (buf[2] 8) | buf[3];
tn.transport_stream_id = transport_stream_id;
parse_descriptors (NIT, buf + 6, descriptors_loop_len, tn);
@@ -1991,7 +1994,7 @@ static void dump_lists (void)
//FIXME: s-subtitling_pid
s-ac3_pid,
s-service_id,
- t-network_id,
+ t-original_network_id,
s-transport_stream_id,
t-orbital_pos,
t-we_flag,
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] dvb driver for opera-s1
On Thursday 10 August 2006 18:05, Janne Grunau wrote: On Thursday 10 August 2006 09:26, Patrick Boettcher wrote: Can you provide a lsusb -v before and after the cypress firmware was downloaded? I can only give the output before firmware download: http://www.grunau.be/lsusb_operaS1_cold.txt And here after cypress firmware download http://www.grunau.be/lsusb_operaS1_warm.txt Janne ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Scan Data for DVB-S in North America
I have compiled by hand, from LyngSat, scan data for most FTA satellites visible in North America, and I would like it to be made available to anyone that wants it. I have not included any subscription channels, or NTSC. Many of these channels are on the air only rarely (feeds). Some are encrypted, as there are some transponders (especially on IA5) that have both encrypted and clear channels. For FEC I used AUTO, because I'm lazy and on my system it works just as well as specifying it. With my system I get about 190 TV and 80 radio channels. I am attaching the data as a .tar.gz file (hope this is the correct procedure). Garnet dvb-s.tar.gz Description: application/gzip ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
RE: [linux-dvb] Scan Data for DVB-S in North America
I have compiled by hand, from LyngSat, scan data for most FTA satellites visible in North America, and I would like it to be made available to anyone that wants it. I have not included any subscription channels, or NTSC. Many of these channels are on the air only rarely (feeds). Some are encrypted, as there are some transponders (especially on IA5) that have both encrypted and clear channels. For FEC I used AUTO, because I'm lazy and on my system it works just as well as specifying it. With my system I get about 190 TV and 80 radio channels. I am attaching the data as a .tar.gz file (hope this is the correct procedure). Garnet why is it a .bin file. what are you trying to pull? Dave ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Scan Data for DVB-S in North America
Dave Schile schrieb: I have compiled by hand, from LyngSat, scan data for most FTA satellites visible in North America, and I would like it to be made available to anyone that wants it. I have not included any subscription channels, or NTSC. Many of these channels are on the air only rarely (feeds). Some are encrypted, as there are some transponders (especially on IA5) that have both encrypted and clear channels. For FEC I used AUTO, because I'm lazy and on my system it works just as well as specifying it. With my system I get about 190 TV and 80 radio channels. I am attaching the data as a .tar.gz file (hope this is the correct procedure). Garnet why is it a .bin file. what are you trying to pull? Well, it's a normal gzipped tar-archive. No .bin file to be seen on my computer. Cheers, Tobias ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Scan Data for DVB-S in North America
Sorry, but it came across for me as a bin file. That's also how it shows up in the mailing list archive See it at: http://linuxtv.org/pipermail/linux-dvb/2006-August/012361.html Dave Schile schrieb: I have compiled by hand, from LyngSat, scan data for most FTA satellites visible in North America, and I would like it to be made available to anyone that wants it. I have not included any subscription channels, or NTSC. Many of these channels are on the air only rarely (feeds). Some are encrypted, as there are some transponders (especially on IA5) that have both encrypted and clear channels. For FEC I used AUTO, because I'm lazy and on my system it works just as well as specifying it. With my system I get about 190 TV and 80 radio channels. I am attaching the data as a .tar.gz file (hope this is the correct procedure). Garnet why is it a .bin file. what are you trying to pull? Well, it's a normal gzipped tar-archive. No .bin file to be seen on my computer. Cheers, Tobias ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Scan Data for DVB-S in North America
Yes, I just looked at that. I attached the file as a tar.gz file, but it got changed to tar.bin. I don't know why, but it appears that that is a security thing, and I don't know the proper procedures. The files should go to to dvb-apps, but I don't know how to get them there. I am not a developer. When I set up my system I was unable to find any data on the web for North American satellites, except for a couple of EchoStars with encrypted data. So I created my files by hand. I was hoping to save somebody a lot of work. I didn't mean to step on anyone's toes. Garnet Dave Schile wrote: That's not what I'm seeing here: http://linuxtv.org/pipermail/linux-dvb/2006-August/date.html#start That's the mailing list archive, Check the link in your first post. Dave Garnet, I changed the name and got the file to gunzip correctly. That's great information and I thank you for it. Sorry I sounded so hostile. Dave ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [vdr] Re: [linux-dvb] Kernel bug using kernel 2.6.17
I demand that Jose Alberto Reguero may or may not have written... I have problems with kernels newer that 2.6.16 and vdr. With kernel 2.6.17.9 see atached log1. With kernel 2.6.18-rc4 with kernels drivers and with last mercurial drivers see log2. After that errors I need to reboot. [snip] Does this happen without the proprietary graphics card taintware? -- | Darren Salt| linux or ds at | nr. Ashington, | Toon | RISC OS, Linux | youmustbejoking,demon,co,uk | Northumberland | Army | Say NO to UK ID cards. http://www.no2id.net/ Hope is a good breakfast, but it is a bad supper. ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Re: Error unloading WinTV NOVA T USB2
Hi, I've been using again the WinTV NOVA T USB2 and the module behaved better today. Still impossible to unload the modules from memory snd_usb_audio 68704 0 snd_usb_lib14336 1 snd_usb_audio snd_rawmidi22048 1 snd_usb_lib snd_hwdep 8708 1 snd_usb_audio dib3000mc 11140 4294967292 dibx000_common 3844 1 dib3000mc dvb_pll14212 4294967292 radeon 98848 1 drm61076 2 radeon This is what it looks like after a make unload in the v4l directory. On the other hand I did not have any Oops and I was able to unplug and replug the USB cable. Maybe there is nothing wrong in that, it would be nice, though, to be able to remove modules from memory. [EMAIL PROTECTED] v4l-dvb]# make unload make -C /home/andrea/projects/cvs/3rdParty/v4l-dvb/v4l unload make[1]: Entering directory `/home/andrea/projects/cvs/3rdParty/v4l-dvb/v4l' scripts/make_makefile.pl /lib/modules/2.6.17.8/build scripts/rmmod.pl unload found 21 modules /sbin/rmmod dib3000mc ERROR: Module dib3000mc is in use /sbin/rmmod dibx000_common ERROR: Module dibx000_common is in use by dib3000mc /sbin/rmmod dvb_pll ERROR: Module dvb_pll is in use make[1]: Leaving directory `/home/andrea/projects/cvs/3rdParty/v4l-dvb/v4l' [EMAIL PROTECTED] v4l-dvb]# /sbin/rmmod -f dib3000mc ERROR: Removing 'dib3000mc': Resource temporarily unavailable ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] Artec T1 USB1.1 TVBOX with AN2235 - Bulk message failed: -22
Hi, I bought one of these Artec T1 devices yesterday, been scratching
my head trying to get it to work. I'm getting the exact same error as
reported by Iain Wallace a couple of weeks ago here:
http://www.linuxtv.org/pipermail/linux-dvb/2006-August/012066.html
Now I think I have worked out what is happening. According to dmesg:
dvb-usb: found a 'Artec T1 USB1.1 TVBOX with AN2235' in warm state.
But lsusb says:
Bus 002 Device 005: ID 05d8:8107 Ultima Electronics Corp. Artec T1 USB
TVBOX with AN2235 (cold)
So, it looks to me as if the dvb-usb module thinks that the device has
already had it's firmware loaded, when in fact it has not. I assume
this is what is meant by warm and cold. This would also explain
why the device works when the firmware has already been loaded by
Windows, as others have reported.
After the firmware is loaded on Windows, the device ID changes from
8107 to 8108.
linux-2.6.15.7/drivers/media/dvb/dvb-usb/dvb-usb-ids.h confirms this:
#define USB_PID_ULTIMA_TVBOX_AN2235_COLD0x8107
#define USB_PID_ULTIMA_TVBOX_AN2235_WARM0x8108
After a bit mre grepping I found this in dibusb-mb.c:
static struct usb_device_id dibusb_dib3000mb_table [] = {
...
/* 21 */{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,
USB_PID_ULTIMA_TVBOX_AN2235_COLD) },
/* 22 */{ USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC,
USB_PID_ULTIMA_TVBOX_AN2235_WARM) },
...
{ Artec T1 USB1.1 TVBOX with AN2235,
{ dibusb_dib3000mb_table[20], NULL },
{ dibusb_dib3000mb_table[21], NULL },
},
So it looks like the box is being misidentified because these array
indexes should be 21,22 instead of 20,21.
So I recompiled my kernel with this change. Now when I plug the box in
I get this:
Aug 22 00:10:52 desktop kernel: [17232880.768000] usb 2-1: new full
speed USB device using uhci_hcd and address 7
Aug 22 00:10:53 desktop kernel: [17232882.036000] dvb-usb: found a
'Artec T1 USB1.1 TVBOX with AN2235' in cold state, will try to load a
firmware
Aug 22 00:10:54 desktop kernel: [17232882.316000] dvb-usb: downloading
firmware from file 'dvb-usb-dibusb-an2235-01.fw' to the 'Cypress
AN2235'
Aug 22 00:10:55 desktop kernel: [17232883.704000] dvb-usb: Artec T1
USB1.1 TVBOX with AN2235 successfully initialized and connected.
Aug 22 00:10:55 desktop kernel: [17232883.708000] usbcore: registered
new driver dvb_usb_dibusb_mb
Aug 22 00:10:55 desktop kernel: [17232883.816000] usb 2-1: USB
disconnect, address 7
Aug 22 00:10:55 desktop kernel: [17232883.816000] dvb-usb: generic
DVB-USB module successfully deinitialized and disconnected.
Aug 22 00:10:57 desktop kernel: [17232886.072000] usb 2-1: new full
speed USB device using uhci_hcd and address 8
Aug 22 00:10:58 desktop kernel: [17232886.224000] dvb-usb: found a
'DiBcom USB1.1 DVB-T reference design (MOD3000)' in warm state.
Aug 22 00:10:58 desktop kernel: [17232886.224000] dvb-usb: will use
the device's hardware PID filter (table count: 16).
Aug 22 00:10:58 desktop kernel: [17232886.244000] DVB: registering new
adapter (DiBcom USB1.1 DVB-T reference design (MOD3000)).
Aug 22 00:10:58 desktop kernel: [17232886.252000] DVB: registering
frontend 0 (DiBcom 3000M-B DVB-T)...
Aug 22 00:10:58 desktop kernel: [17232886.26] dibusb: this device
has the Panasonic ENV77H11D5 onboard.
Aug 22 00:10:58 desktop kernel: [17232886.26] input: IR-receiver
inside an USB DVB receiver as /class/input/input5
Aug 22 00:10:58 desktop kernel: [17232886.26] dvb-usb: schedule
remote query interval to 150 msecs.
Aug 22 00:10:58 desktop kernel: [17232886.276000] dvb-usb: DiBcom
USB1.1 DVB-T reference design (MOD3000) successfully initialized and
connected.
Now the green light power comes on, so that's progress, I think. But
straight afterwards my computer locks up hard, without even time to
print any further error messages.
--
Alistair Buxton
[EMAIL PROTECTED]
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
