Re: [PATCHv2] ARM: OMAP: PM: stop early on systems without twl

[Tony Lindgren]

* Sebastian Reichel  [170613 02:50]:
> From: Sebastian Reichel 
> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
> index 63027e60cc20..92e335decc61 100644
> --- a/arch/arm/mach-omap2/pm.c
> +++ b/arch/arm/mach-omap2/pm.c
> @@ -240,6 +240,10 @@ omap_postcore_initcall(omap2_common_pm_init);
>  
>  int __init omap2_common_pm_late_init(void)
>  {
> +#if IS_BUILTIN(CONFIG_TWL6040_CORE) || IS_BUILTIN(CONFIG_TWL4030_CORE)
> + if (!twl_rev())
> + goto no_twl;
> +
>   /* Init the voltage layer */
>   omap3_twl_init();
>   omap4_twl_init();
> @@ -253,4 +257,9 @@ int __init omap2_common_pm_late_init(void)
>   omap_devinit_smartreflex();
>  
>   return 0;
> +
> +no_twl:
> +#endif
> + pr_err("OMAP4 PM not supported!\n");
> + return -ENODEV;

This should probably just say "OMAP4 SmartReflex not supported".
We already have omap4 CPUs hit off mode during idle. What's
missing is save and restore of registers for various domains.

SmartReflex is also doable without twl PMICs, at least ti81xx
are doing SmartReflex over a group of GPIO pins without twl.

So maybe just put the twl specific parts into IS_BUILTIN so
we can optionally add other PM init here if needed?

Regards,

Tony

Re: [PATCHv2] ARM: OMAP: PM: stop early on systems without twl

[Tony Lindgren]

* Sebastian Reichel  [170613 02:50]:
> From: Sebastian Reichel 
> diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
> index 63027e60cc20..92e335decc61 100644
> --- a/arch/arm/mach-omap2/pm.c
> +++ b/arch/arm/mach-omap2/pm.c
> @@ -240,6 +240,10 @@ omap_postcore_initcall(omap2_common_pm_init);
>  
>  int __init omap2_common_pm_late_init(void)
>  {
> +#if IS_BUILTIN(CONFIG_TWL6040_CORE) || IS_BUILTIN(CONFIG_TWL4030_CORE)
> + if (!twl_rev())
> + goto no_twl;
> +
>   /* Init the voltage layer */
>   omap3_twl_init();
>   omap4_twl_init();
> @@ -253,4 +257,9 @@ int __init omap2_common_pm_late_init(void)
>   omap_devinit_smartreflex();
>  
>   return 0;
> +
> +no_twl:
> +#endif
> + pr_err("OMAP4 PM not supported!\n");
> + return -ENODEV;

This should probably just say "OMAP4 SmartReflex not supported".
We already have omap4 CPUs hit off mode during idle. What's
missing is save and restore of registers for various domains.

SmartReflex is also doable without twl PMICs, at least ti81xx
are doing SmartReflex over a group of GPIO pins without twl.

So maybe just put the twl specific parts into IS_BUILTIN so
we can optionally add other PM init here if needed?

Regards,

Tony

[PATCHv2] ARM: OMAP: PM: stop early on systems without twl

[Sebastian Reichel]

From: Sebastian Reichel 

Motorola Droid 4 has an OMAP4, but no TWL6030. It currently
complains verbosely about this during boot:

twl: not initialized
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 141 Vs max 1316660
omap2_set_init_voltage: unable to find boot up OPP for vdd_core
omap2_set_init_voltage: unable to set vdd_core
omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
omap2_set_init_voltage: unable to set vdd_iva

While proper support for CPCAP should be added at some point,
let's exit early in omap2_common_pm_late_init() until that
has been implemented to avoid the above errors. There is still
a reminder about missing PM in dmesg:

Missing OMAP4 PM for this platform!

Signed-off-by: Sebastian Reichel 
---
Changes since PATCHv1:
 * actually add the message about missing PM support
 * check if TWL is enabled at all
---
 arch/arm/mach-omap2/pm.c | 9 +
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 63027e60cc20..92e335decc61 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -240,6 +240,10 @@ omap_postcore_initcall(omap2_common_pm_init);
 
 int __init omap2_common_pm_late_init(void)
 {
+#if IS_BUILTIN(CONFIG_TWL6040_CORE) || IS_BUILTIN(CONFIG_TWL4030_CORE)
+   if (!twl_rev())
+   goto no_twl;
+
/* Init the voltage layer */
omap3_twl_init();
omap4_twl_init();
@@ -253,4 +257,9 @@ int __init omap2_common_pm_late_init(void)
omap_devinit_smartreflex();
 
return 0;
+
+no_twl:
+#endif
+   pr_err("OMAP4 PM not supported!\n");
+   return -ENODEV;
 }
-- 
2.11.0

[PATCHv2] ARM: OMAP: PM: stop early on systems without twl

[Sebastian Reichel]

From: Sebastian Reichel 

Motorola Droid 4 has an OMAP4, but no TWL6030. It currently
complains verbosely about this during boot:

twl: not initialized
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 1375000 Vs max 1316660
twl6030_uv_to_vsel:OUT OF RANGE! non mapped vsel for 141 Vs max 1316660
omap2_set_init_voltage: unable to find boot up OPP for vdd_core
omap2_set_init_voltage: unable to set vdd_core
omap2_set_init_voltage: unable to find boot up OPP for vdd_iva
omap2_set_init_voltage: unable to set vdd_iva

While proper support for CPCAP should be added at some point,
let's exit early in omap2_common_pm_late_init() until that
has been implemented to avoid the above errors. There is still
a reminder about missing PM in dmesg:

Missing OMAP4 PM for this platform!

Signed-off-by: Sebastian Reichel 
---
Changes since PATCHv1:
 * actually add the message about missing PM support
 * check if TWL is enabled at all
---
 arch/arm/mach-omap2/pm.c | 9 +
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 63027e60cc20..92e335decc61 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -240,6 +240,10 @@ omap_postcore_initcall(omap2_common_pm_init);
 
 int __init omap2_common_pm_late_init(void)
 {
+#if IS_BUILTIN(CONFIG_TWL6040_CORE) || IS_BUILTIN(CONFIG_TWL4030_CORE)
+   if (!twl_rev())
+   goto no_twl;
+
/* Init the voltage layer */
omap3_twl_init();
omap4_twl_init();
@@ -253,4 +257,9 @@ int __init omap2_common_pm_late_init(void)
omap_devinit_smartreflex();
 
return 0;
+
+no_twl:
+#endif
+   pr_err("OMAP4 PM not supported!\n");
+   return -ENODEV;
 }
-- 
2.11.0