noise after modprobe cx8800

2015-09-05 Thread Paweł Kiełkowski
Hello,

I have also another issue after switching from Fedora 16 to Fedora 22.
Every time the cx8800 module is loaded I hear annoying high-pitched
noise until I open tvtime. After closing tvtime there is no sound
anymore. Similar case was already reported here:
http://video4linux-list.redhat.narkive.com/I1MD0PsM/cx88-white-noise-with-audio-cable-no-sound-with-cx88-alsa
But it is very old case (even pre-F16) and seems that it did not get any
attention.

I have the TV card connected to soundcard’s Line In as I couldn’t get
the cx88-alsa to work. Is that so, if I do not see the corresponding
"…[Audio Port]…" in lspci, that my card does not support the DMA sound
and cx88-alsa won’t work? At boot cx88-alsa is not loaded at all and if
I load it by myself there is no log output apart from "cx2388x alsa
driver version 0.0.9 loaded". No new audio device is created or anything
like that.

Fedora 16 kernel: 3.6.11-4.fc16.i686.PAE
Fedora 22 kernel: 4.1.6-200.fc22.x86_64
TV card: 01:09.0 Multimedia video controller [0400]: Conexant Systems,
Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: LeadTek Research Inc. Winfast TV 2000XP Expert
[107d:6611]
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at f900 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: cx8800
Kernel modules: cx8800

Line In is not muted in Fedora 16. I use following options:
"options cx88xx card=5 tuner=38 i2c_scan=1"

Best regards
PK
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html


tvtime cannot set PAL-DK for cx88 device

2015-08-31 Thread Paweł Kiełkowski
Hello,

Last week I made a big jump from Fedora 16 to Fedora 22 and tvtime is no
longer able to set the PAL-DK norm. What I am getting is: "videoinput:
Driver refuses to set norm: Device or resource busy". There is no such
message when running tvtime on Fedora 16.
I presume that following change introduced this check.
http://git.linuxtv.org/cgit.cgi/media_tree.git/commit/?id=078859a3230c123ed9cb798fb1cd7f89b4fde102

Fedora 16 kernel: 3.6.11-4.fc16.i686.PAE
Fedora 22 kernel: 4.1.6-200.fc22.x86_64
tvtime 1.0.7 from git on both systems
TV card: 01:09.0 Multimedia video controller [0400]: Conexant Systems,
Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: LeadTek Research Inc. Winfast TV 2000XP Expert
[107d:6611]
Flags: bus master, medium devsel, latency 32, IRQ 19
Memory at f900 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Kernel driver in use: cx8800
Kernel modules: cx8800

Best regards
PK
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html