Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
On 06/09/11 03:21, Alexander Holler wrote: On 08.06.2011 23:57, Igor Grinberg wrote: On 06/07/11 14:15, Alexander Holler wrote: Am 07.06.2011 11:50, schrieb Igor Grinberg: On 06/07/11 11:01, Alexander Holler wrote: Am 31.05.2011 12:29, schrieb Tony Lindgren: * Alexander Hollerhol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Hollerhol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); +/* Ensure msecure is mux'd to be able to set the RTC. */ +omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). --- arch/arm/mach-omap2/board-omap3beagle.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..24b4417 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request(22, msecure); + gpio_direction_output(22, true); Can this be gpio_request_one() instead, please? Also, it will be nice to make a define for the magic 22. You need the gpio_22 in the mux_init, so using a define would imho introduce a potential source for an error, at least when the define would not be anywhere near the gpio_22 and someone would forget change the string too, when he changes the define. So I don't think a define adds much value there. Why not leave sys_drm_msecure for mux_init, or does it make troubles on XM? There is nothing wrong with the small patch which uses sys_drm_msecure. It's short and does everything which is needed to use the RTC. I've posted the solution with the use of the GPIO-mode only as an alternative because the drm-mode isn't explained in the TRM (I assume one has to sign a NDA to get more informations on that). So it is not obvious what my first patch does. Using sys_drm_msecure works because it seems to be always off, at least on the BeagleBoards. The additional functionality in my second patch to turn off possible modifications on the RTC through switching the GPIO is most likely just an educational feature, I don't think someone will ever use that. I don't have any preferences which solution will end in the kernel, I just wanted to offer the second one too. I see. Is the new patch version somehow provides better functionality? You configure the gpio for output, this means that the pin is actually driven and not just relies on internal pullup (which can vary from chip to chip). I know nothing about that msecure stuff, but may be it is better to drive the pin, then just configuring the mux (enabling internal pullup)... What about gpio_request_one()? To conform with the rest of the file and mach-omap2/*. Below is an updated version. The gpio_export() might be removed too. The original patch version is already in Linus' tree, so this one will not apply as it is. If you decide it is better then the original one, then it must be rebased. Otherwise, looks OK. Regards, Alexander From: Alexander Holler hol...@ahsoftware.de Date: Thu, 19 May 2011 11:42:05 +0200 Subject: [PATCH v3] arm: omap3: beagle: Ensure msecure is mux'd and high to be able to set the RTC Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Signed-off-by: Alexander Holler hol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |5 + 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Hello, Am 09.06.2011 09:40, schrieb Igor Grinberg: On 06/09/11 03:21, Alexander Holler wrote: I see. Is the new patch version somehow provides better functionality? You configure the gpio for output, this means that the pin is actually driven and not just relies on internal pullup (which can vary from chip to chip). I know nothing about that msecure stuff, but may be it is better to drive the pin, then just configuring the mux (enabling internal pullup)... Just using the internal pullup was enough with my BeagleBoard C4. Below is an updated version. The gpio_export() might be removed too. The original patch version is already in Linus' tree, so this one will not apply as it is. If you decide it is better then the original one, then it must be rebased. Otherwise, looks OK. I'm fine with either version, so no new patch is necessary. ;) Regards, Alexander -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
On 06/07/11 14:15, Alexander Holler wrote: Am 07.06.2011 11:50, schrieb Igor Grinberg: On 06/07/11 11:01, Alexander Holler wrote: Am 31.05.2011 12:29, schrieb Tony Lindgren: * Alexander Hollerhol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Hollerhol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); +/* Ensure msecure is mux'd to be able to set the RTC. */ +omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). --- arch/arm/mach-omap2/board-omap3beagle.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..24b4417 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request(22, msecure); + gpio_direction_output(22, true); Can this be gpio_request_one() instead, please? Also, it will be nice to make a define for the magic 22. You need the gpio_22 in the mux_init, so using a define would imho introduce a potential source for an error, at least when the define would not be anywhere near the gpio_22 and someone would forget change the string too, when he changes the define. So I don't think a define adds much value there. Why not leave sys_drm_msecure for mux_init, or does it make troubles on XM? What about gpio_request_one()? To conform with the rest of the file and mach-omap2/*. -- Regards, Igor. -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
On 08.06.2011 23:57, Igor Grinberg wrote: On 06/07/11 14:15, Alexander Holler wrote: Am 07.06.2011 11:50, schrieb Igor Grinberg: On 06/07/11 11:01, Alexander Holler wrote: Am 31.05.2011 12:29, schrieb Tony Lindgren: * Alexander Hollerhol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Hollerhol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); +/* Ensure msecure is mux'd to be able to set the RTC. */ +omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). --- arch/arm/mach-omap2/board-omap3beagle.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..24b4417 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request(22, msecure); + gpio_direction_output(22, true); Can this be gpio_request_one() instead, please? Also, it will be nice to make a define for the magic 22. You need the gpio_22 in the mux_init, so using a define would imho introduce a potential source for an error, at least when the define would not be anywhere near the gpio_22 and someone would forget change the string too, when he changes the define. So I don't think a define adds much value there. Why not leave sys_drm_msecure for mux_init, or does it make troubles on XM? There is nothing wrong with the small patch which uses sys_drm_msecure. It's short and does everything which is needed to use the RTC. I've posted the solution with the use of the GPIO-mode only as an alternative because the drm-mode isn't explained in the TRM (I assume one has to sign a NDA to get more informations on that). So it is not obvious what my first patch does. Using sys_drm_msecure works because it seems to be always off, at least on the BeagleBoards. The additional functionality in my second patch to turn off possible modifications on the RTC through switching the GPIO is most likely just an educational feature, I don't think someone will ever use that. I don't have any preferences which solution will end in the kernel, I just wanted to offer the second one too. What about gpio_request_one()? To conform with the rest of the file and mach-omap2/*. Below is an updated version. The gpio_export() might be removed too. Regards, Alexander From: Alexander Holler hol...@ahsoftware.de Date: Thu, 19 May 2011 11:42:05 +0200 Subject: [PATCH v3] arm: omap3: beagle: Ensure msecure is mux'd and high to be able to set the RTC Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Signed-off-by: Alexander Holler hol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |5 + 1 files changed, 5 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..4c9e26e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,11 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request_one(22, GPIOF_OUT_INIT_HIGH, msecure); + gpio_export(22, false); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT);
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Am 31.05.2011 12:29, schrieb Tony Lindgren: * Alexander Hollerhol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Hollerhol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); + /* Ensure msecure is mux'd to be able to set the RTC. */ + omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). --- arch/arm/mach-omap2/board-omap3beagle.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..24b4417 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request(22, msecure); + gpio_direction_output(22, true); + gpio_export(22, false); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 Regards, Alexander Holler -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
On 06/07/11 11:01, Alexander Holler wrote: Am 31.05.2011 12:29, schrieb Tony Lindgren: * Alexander Hollerhol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Hollerhol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); +/* Ensure msecure is mux'd to be able to set the RTC. */ +omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). --- arch/arm/mach-omap2/board-omap3beagle.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..24b4417 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request(22, msecure); + gpio_direction_output(22, true); Can this be gpio_request_one() instead, please? Also, it will be nice to make a define for the magic 22. + gpio_export(22, false); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- Regards, Igor. -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Am 07.06.2011 11:50, schrieb Igor Grinberg: On 06/07/11 11:01, Alexander Holler wrote: Am 31.05.2011 12:29, schrieb Tony Lindgren: * Alexander Hollerhol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Hollerhol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); +/* Ensure msecure is mux'd to be able to set the RTC. */ +omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 I've later switched to the following patch which muxes msecure as GPIO (the drm-mode isn't explained in the TRM) and also exports the GPIO, so root could easily switch it to prevent modifications on the RTC. (Warning, either my clipboard or the version of Thunderbird I'm currently using replaces the tabs with spaces in the pasted patch and I'm currently too lazy to search a workaround). --- arch/arm/mach-omap2/board-omap3beagle.c |6 ++ 1 files changed, 6 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 33007fd..24b4417 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -673,6 +673,12 @@ static void __init omap3_beagle_init(void) usbhs_init(usbhs_bdata); omap3beagle_flash_init(); + /* Ensure msecure is high to be able to set the RTC. */ + omap_mux_init_signal(gpio_22, OMAP_PIN_OFF_OUTPUT_HIGH); + gpio_request(22, msecure); + gpio_direction_output(22, true); Can this be gpio_request_one() instead, please? Also, it will be nice to make a define for the magic 22. You need the gpio_22 in the mux_init, so using a define would imho introduce a potential source for an error, at least when the define would not be anywhere near the gpio_22 and someone would forget change the string too, when he changes the define. So I don't think a define adds much value there. + gpio_export(22, false); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); Regards, Alexander -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
* Alexander Holler hol...@ahsoftware.de [110405 06:38]: Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Adding this into fixes. Tony Signed-off-by: Alexander Holler hol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); + /* Ensure msecure is mux'd to be able to set the RTC. */ + omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[PATCH] arm: omap3: beagle: Ensure msecure is mux'd to be able to set the RTC
Without msecure beeing high it isn't possible to set (or start) the RTC. Tested with a BeagleBoard C4. Signed-off-by: Alexander Holler hol...@ahsoftware.de --- arch/arm/mach-omap2/board-omap3beagle.c |3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 46d814a..ebe3a7e 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -628,6 +628,9 @@ static void __init omap3_beagle_init(void) usb_ehci_init(ehci_pdata); omap3beagle_flash_init(); + /* Ensure msecure is mux'd to be able to set the RTC. */ + omap_mux_init_signal(sys_drm_msecure, OMAP_PIN_OFF_OUTPUT_HIGH); + /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal(sdrc_cke0, OMAP_PIN_OUTPUT); omap_mux_init_signal(sdrc_cke1, OMAP_PIN_OUTPUT); -- 1.7.3.4 -- To unsubscribe from this list: send the line unsubscribe linux-omap in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
