Re: [Installfest] Re: Tin of worms/was Printing the Rute manual
I'm a newbie! and still have trouble with the Linux installation, where I still can't read my other hard drive partitions after weeks of corresponding with this newsgroup. Anyone wouldn't mind performing a site visit to help me set it up? I live close to the Cant. Uni. I envisage the setup should not take too long, unless a re-installation is required. Email me and we can set up a time. Cheers, Hansen [EMAIL PROTECTED] wrote: I am in Addington but with reasonable notice I will visit most anyone on site in ChCh if I can help. Regards, Jason Greenwood 021-184-3160 03-338-3805 Chris Hellyar wrote: I'm just looking for suburb :-). That way the emails will get spread around a bit. Leo has(is) collating the email addresses etc from the yellow forms, and I was hoping we (The royal) would be able to do a brief mailout this week sometime with contact emails for clug folks prepared (initially) to answer emails etc, for folks not comfortable with the mailing list concept. If the person the email is in their vague area then if a visit is required it's not a major hassle for the newbie/cluger.. Obviously all of this is at the clugers discretion, I don't want to have anyone think we're drumming them into service, so to speak. Cheers, Chris H. - Original Message - From: Christopher Sawtell [EMAIL PROTECTED] To: Zane Gilmore [EMAIL PROTECTED] Cc: Installfest Mail List [EMAIL PROTECTED] Sent: Monday, July 29, 2002 10:31 AM Subject: Re: [Installfest] Re: Tin of worms/was Printing the Rute manual I think / hope I have sorted out Peter Cornelius' immediate problems by e-mail. I can take the odd 'phone call too, I have a couple or three friends who do that already, so I suppose another won't make that much difference. If the exercise were to get onerous, I'd want to review the arrangements. Number's correct in the 'Phone book. -- Christopher Sawtell. Zane Gilmore wrote: I don't mind giving a hand. Taking phone calls in the evening might be a problem. (I have a young family which makes it difficult) However I can answer emails and make calls a little more easily. Maybe take the odd call here at work (not too many though) I could even do the odd visit or similar. I certainly don't think we should leave people in the lurch with their Linux installs. On Fri, 2002-07-26 at 22:15, Chris Hellyar wrote: NOTE: this is on the installfest list... (just to avoid the crosspost :-). Do we have any other members on the northern side of town who can help Peter? He's out in Rangiora. I've offered to print him a copy of Rute if he's interested in coming out and standing in front of the printer watching it. I also offered to fix up his printer, but then found out he's 1 hours drive from here... (yes, I know, copyright, GPL, Blah blah) Someone should offer to set up his printer for him if we've got a capable member in Rangiora or at least closer than me :-). - Original Message - From: Peter Cornelius What a tin of worms I've opened up. All I wanted was some documentation which would tell me, amongst other things, how to unzip, install a printer and print a manual for myself. But since I don't have such a manual I was ___ Installfest mailing list [EMAIL PROTECTED] http://www.linuxnut.co.nz/mailman/listinfo/installfest ___ Installfest mailing list [EMAIL PROTECTED] http://www.linuxnut.co.nz/mailman/listinfo/installfest ___ Installfest mailing list [EMAIL PROTECTED] http://www.linuxnut.co.nz/mailman/listinfo/installfest
Re: [Installfest] Re: Tin of worms/was Printing the Rute manual
Hansen Loke wrote: I'm a newbie! and still have trouble with the Linux installation, where I still can't read my other hard drive partitions To examin the set-up of your partitions you use the fdisk utility in list mode. Be sure to append the -l to the fdisk command, or you will have fdisk in partition table edit mode. You DON'T want that!!! Here is the fdisk command in list mode and its output on my machine: [chris@berty chris]$ su Password: [root@berty chris]# /sbin/fdisk -l Disk /dev/scsi/host0/bus0/target0/lun0/disc: 255 heads, 63 sectors, 1099 cylinders Units = cylinders of 16065 * 512 bytes Device BootStart End Blocks Id System /dev/scsi/host0/bus0/target0/lun0/part1 * 1 2 16033+ 83 Linux /dev/scsi/host0/bus0/target0/lun0/part4 3 1099 8811652+ 5 Extended /dev/scsi/host0/bus0/target0/lun0/part5 327 200781 83 Linux /dev/scsi/host0/bus0/target0/lun0/part62855 224878+ 82 Linux swap /dev/scsi/host0/bus0/target0/lun0/part756 758 5646816 83 Linux /dev/scsi/host0/bus0/target0/lun0/part8 759 947 1518111 83 Linux /dev/scsi/host0/bus0/target0/lun0/part9 948 1099 1220908+ 83 Linux Disk /dev/scsi/host0/bus0/target1/lun0/disc: 64 heads, 32 sectors, 1002 cylinders Units = cylinders of 2048 * 512 bytes Device BootStart End Blocks Id System /dev/scsi/host0/bus0/target1/lun0/part1 1 1002 1026032 83 Linux Disk /dev/ide/host0/bus0/target0/lun0/disc: 15 heads, 63 sectors, 8960 cylinders Units = cylinders of 945 * 512 bytes Device BootStart End Blocks Id System /dev/ide/host0/bus0/target0/lun0/part1 1 8960 4233568+ 83 Linux Disk /dev/ide/host0/bus1/target0/lun0/disc: 15 heads, 63 sectors, 8960 cylinders Units = cylinders of 945 * 512 bytes Device BootStart End Blocks Id System /dev/ide/host0/bus1/target0/lun0/part1 * 1 8960 4233568+ 83 Linux [root@berty chris]# What happens on your machine if you do that? You will then have to mount the partitions to which you wish to have access. Once again here is the mount command and its output on my machine: [root@berty chris]# mount /dev/sda5 on / type ext2 (rw) none on /proc type proc (rw) devfs on /dev type devfs (rw) /dev/sda1 on /boot type ext2 (rw) none on /dev/pts type devpts (rw,mode=0620) none on /dev/shm type tmpfs (rw) /dev/sda8 on /home type ext3 (rw) /dev/sda7 on /usr type ext3 (rw) /dev/sda9 on /var type ext3 (rw) /dev/sdb1 on /home2 type ext2 (rw) /dev/hda1 on /mnt/disk1 type ext2 (rw) /dev/hdc1 on /mnt/disk2 type ext2 (rw) [root@berty chris]# As you can see from the above mount list I have two disks which are not in the normal run of things, namely: /dev/hda1 on /mnt/disk1 type ext2 (rw) /dev/hdc1 on /mnt/disk2 type ext2 (rw) In order to do this I created two new directories in the /mnt directory:- # mkdir /mnt/disk1 # mkdir /mnt/disk2 and then mounted the disks. # mount -t ext2 /dev/hda1 /mnt/disk1 # mount -t ext2 /dev/hda2 /mnt/disk2 the '-t ext2' tells the mount command that it is to mount an ext2 type of linux file-system, you will need to substitute the correct flag for the types of file-systems you wish to mount. you should have access to the file-systems now. See:- [root@berty chris]# exit exit [chris@berty chris]$ ls /mnt/disk1/isos/ debian/ Mandrake/ OpenOffice/ slackware/ VALinux/ gentoo/ Mandrake82updated/ peanut/ smalltalk/ winlinux/ [chris@berty chris]$ You can get the whole story about these commands by using the man command:- $ man fdisk $ man mkdir $ man mount Clear as mud now? after weeks of corresponding with this newsgroup. For a plea for help from a mail list, or news group, to be effective you need to tell us the basic info about your machine and the distribution. This really is a big, big help, especially if we are trying to get something like a video or sound card to work. For generic stuff like the above it's not quite so important. Anyone wouldn't mind performing a site visit to help me set it up? One of the really useful features of unix and its offspring is that all this command line stuff can be done remotely over the Internet, or for that matter a direct connection via the phone. I installed and set up a database system for a fellow in California not so long ago doing it this way. I live close to the Cant. Uni. I envisage the setup should not take too long, All of 5 mins at the most I should think. unless a re-installation is required. Email me and we can set up a time. Please feel free to 'phone. Number's correct in the latest 'phone book. Here endeth the Lesson. :-) -- Christopher Sawtell.
Re: [Installfest] Re: Tin of worms/was Printing the Rute manual
Chris, I think we have been through all of this, but it probably helps that you have put it all in one place :-) Hansen, is your machine a laptop? if so ring me up and you can bring it into the office, maybe this evening. Otherwise I may be able to visit. work 3798966 Nick Hansen Loke wrote: I'm a newbie! and still have trouble with the Linux installation, where I still can't read my other hard drive partitions To examin the set-up of your partitions you use the fdisk utility in list mode. Be sure to append the -l to the fdisk command, or you will have fdisk in partition table edit mode. You DON'T want that!!! Here is the fdisk command in list mode and its output on my machine: [chris@berty chris]$ su Password: [root@berty chris]# /sbin/fdisk -l Disk /dev/scsi/host0/bus0/target0/lun0/disc: 255 heads, 63 sectors, 1099 cylinders Units = cylinders of 16065 * 512 bytes Device BootStart End Blocks Id System /dev/scsi/host0/bus0/target0/lun0/part1 * 1 2 16033+ 83 Linux /dev/scsi/host0/bus0/target0/lun0/part4 3 1099 8811652+ 5 Extended /dev/scsi/host0/bus0/target0/lun0/part5 327 200781 83 Linux /dev/scsi/host0/bus0/target0/lun0/part62855 224878+ 82 Linux swap /dev/scsi/host0/bus0/target0/lun0/part756 758 5646816 83 Linux /dev/scsi/host0/bus0/target0/lun0/part8 759 947 1518111 83 Linux /dev/scsi/host0/bus0/target0/lun0/part9 948 1099 1220908+ 83 Linux Disk /dev/scsi/host0/bus0/target1/lun0/disc: 64 heads, 32 sectors, 1002 cylinders Units = cylinders of 2048 * 512 bytes Device BootStart End Blocks Id System /dev/scsi/host0/bus0/target1/lun0/part1 1 1002 1026032 83 Linux Disk /dev/ide/host0/bus0/target0/lun0/disc: 15 heads, 63 sectors, 8960 cylinders Units = cylinders of 945 * 512 bytes Device BootStart End Blocks Id System /dev/ide/host0/bus0/target0/lun0/part1 1 8960 4233568+ 83 Linux Disk /dev/ide/host0/bus1/target0/lun0/disc: 15 heads, 63 sectors, 8960 cylinders Units = cylinders of 945 * 512 bytes Device BootStart End Blocks Id System /dev/ide/host0/bus1/target0/lun0/part1 * 1 8960 4233568+ 83 Linux [root@berty chris]# What happens on your machine if you do that? You will then have to mount the partitions to which you wish to have access. Once again here is the mount command and its output on my machine: [root@berty chris]# mount /dev/sda5 on / type ext2 (rw) none on /proc type proc (rw) devfs on /dev type devfs (rw) /dev/sda1 on /boot type ext2 (rw) none on /dev/pts type devpts (rw,mode=0620) none on /dev/shm type tmpfs (rw) /dev/sda8 on /home type ext3 (rw) /dev/sda7 on /usr type ext3 (rw) /dev/sda9 on /var type ext3 (rw) /dev/sdb1 on /home2 type ext2 (rw) /dev/hda1 on /mnt/disk1 type ext2 (rw) /dev/hdc1 on /mnt/disk2 type ext2 (rw) [root@berty chris]# As you can see from the above mount list I have two disks which are not in the normal run of things, namely: /dev/hda1 on /mnt/disk1 type ext2 (rw) /dev/hdc1 on /mnt/disk2 type ext2 (rw) In order to do this I created two new directories in the /mnt directory:- # mkdir /mnt/disk1 # mkdir /mnt/disk2 and then mounted the disks. # mount -t ext2 /dev/hda1 /mnt/disk1 # mount -t ext2 /dev/hda2 /mnt/disk2 the '-t ext2' tells the mount command that it is to mount an ext2 type of linux file-system, you will need to substitute the correct flag for the types of file-systems you wish to mount. you should have access to the file-systems now. See:- [root@berty chris]# exit exit [chris@berty chris]$ ls /mnt/disk1/isos/ debian/ Mandrake/ OpenOffice/ slackware/ VALinux/ gentoo/ Mandrake82updated/ peanut/ smalltalk/ winlinux/ [chris@berty chris]$ You can get the whole story about these commands by using the man command:- $ man fdisk $ man mkdir $ man mount Clear as mud now? after weeks of corresponding with this newsgroup. For a plea for help from a mail list, or news group, to be effective you need to tell us the basic info about your machine and the distribution. This really is a big, big help, especially if we are trying to get something like a video or sound card to work. For generic stuff like the above it's not quite so important. Anyone wouldn't mind performing a site visit to help me set it up? One of the really useful features of unix and its offspring is that all this command line stuff can be done remotely over the Internet, or for that matter a direct connection via the phone. I installed and set up a database system for a fellow in