Re: [Ltsp-discuss] LTSP Newbie printing from other clients
On Wednesday 12 December 2007 13:03:08 -Angga- wrote: Of course it can print to printer attached in another client. i just wondering about your LX300 printer, you sure the printer still work fine? --snip (your lts.conf) [00:19:66:16:23:93] -- the mac address of client1 PRINTER_0_TYPE=P PRINTER_0_DEVICE=/dev/lp0 --snip usually the client should open port 9100 as jetdirect service, you can check it using nmap if the client open that port or not. or you can try to change mac address in lts.conf section (in this case [00:19:66:16:23:93] ) to a hostname or ip address. hope it can help.. Thanks Angga for the assurance. I will build another LTSP on another box and try with different printer too. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 09:41:23 up 40 min, 2.6.22-14-generic GNU/Linux Let's use OpenOffice. http://www.openoffice.org The real challenge of teaching is getting your students motivated to learn. signature.asc Description: This is a digitally signed message part. - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace_ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
Re: [Ltsp-discuss] LTSP Newbie printing from other clients
On Tuesday 11 December 2007 11:48:07 Fajar Priyanto wrote: When I setup the printer using System Administration Printing. I give the printer the name: IBM. Thanks for the response. This makes me wonder, is it possible to print to a printer attached in client1 from client2? Or should I attach 1 printer on each client? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 08:09:57 up 25 min, 2.6.22-14-generic GNU/Linux Let's use OpenOffice. http://www.openoffice.org The real challenge of teaching is getting your students motivated to learn. signature.asc Description: This is a digitally signed message part. - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php_ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
Re: [Ltsp-discuss] LTSP Newbie printing from other clients
On Dec 12, 2007 8:10 AM, Fajar Priyanto [EMAIL PROTECTED] wrote: On Tuesday 11 December 2007 11:48:07 Fajar Priyanto wrote: When I setup the printer using System Administration Printing. I give the printer the name: IBM. Thanks for the response. This makes me wonder, is it possible to print to a printer attached in client1 from client2? Or should I attach 1 printer on each client? Thanks. -- Of course it can print to printer attached in another client. i just wondering about your LX300 printer, you sure the printer still work fine? --snip (your lts.conf) [00:19:66:16:23:93] -- the mac address of client1 PRINTER_0_TYPE=P PRINTER_0_DEVICE=/dev/lp0 --snip usually the client should open port 9100 as jetdirect service, you can check it using nmap if the client open that port or not. or you can try to change mac address in lts.conf section (in this case [00:19:66:16:23:93] ) to a hostname or ip address. hope it can help.. Thanks. -- Angga - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
Re: [Ltsp-discuss] LTSP Newbie printing from other clients
Anybody? Please? On Monday 10 December 2007 19:11:00 Fajar Priyanto wrote: Hello all, I'm setting up LSTP5 with Feisty 64bit. All is ok. The clients can boot. I then connect and setup an Epson LX300 dot-matrix printer on client1 using an IBM Compatible printer driver. From client1 I can print to it OK. But, I cannot print to it from any other client or the server, with error: Network host is busy will retry in 30 seconds This is my lts.conf: [00:19:66:16:23:93] -- the mac address of client1 PRINTER_0_TYPE=P PRINTER_0_DEVICE=/dev/lp0 In adding the printer, I use: - Network Printer (Jet direct) - Put the ip address of client1 - And the port 9100 Is there any step that I miss? There's no any firewall in the client and server. I build the client environment using --arch i386 because the clients are 32bit PC. Thank you very much. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 07:39:24 up 6 min, 2.6.22-14-generic GNU/Linux Let's use OpenOffice. http://www.openoffice.org The real challenge of teaching is getting your students motivated to learn. signature.asc Description: This is a digitally signed message part. - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php_ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
Re: [Ltsp-discuss] LTSP Newbie printing from other clients
On Dec 11, 2007 7:39 AM, Fajar Priyanto [EMAIL PROTECTED] wrote: Anybody? Please? On Monday 10 December 2007 19:11:00 Fajar Priyanto wrote: Hello all, I'm setting up LSTP5 with Feisty 64bit. All is ok. The clients can boot. I then connect and setup an Epson LX300 dot-matrix printer on client1. what name you use for printer in cups server? they can't read some character like '' - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
Re: [Ltsp-discuss] LTSP Newbie printing from other clients
On Tuesday 11 December 2007 09:00:57 -Angga- wrote: On Dec 11, 2007 7:39 AM, Fajar Priyanto [EMAIL PROTECTED] wrote: Anybody? Please? On Monday 10 December 2007 19:11:00 Fajar Priyanto wrote: Hello all, I'm setting up LSTP5 with Feisty 64bit. All is ok. The clients can boot. I then connect and setup an Epson LX300 dot-matrix printer on client1. what name you use for printer in cups server? they can't read some character like '' When I setup the printer using System Administration Printing. I give the printer the name: IBM. Thanks for the response. -- Fajar Priyanto | Reg'd Linux User #327841 | Linux tutorial http://linux2.arinet.org 11:48:04 up 4:15, 2.6.22-14-generic GNU/Linux Let's use OpenOffice. http://www.openoffice.org The real challenge of teaching is getting your students motivated to learn. - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net