Re: class package
/var/spool/mail/robinson schrieb: well i guess that's my question. where do i put these files? i've put em all over the place, and yes i run texhash and i reconfigure and then restart lyx. where do i put them so that lyx recongnises them so i can choose it as a style? __ On Sat, 18 Oct 2003, Thomas Schönhoff wrote: /var/spool/mail/robinson schrieb: Hello. I've just dloaded the style class for my disertation which was written for latex. I think I'm following the directions in the customization section in lyx to add it, but its not working. I wonder if there's a step by step howto somewhere, or can someone break it down step by step how to add a new style class. the tarball comes with a thesis.cls and a chicago.clo do i need anything else? thanks __ Hello, which directory did you copy these files too? Did you run a texhash (root) and reconfigure in LyX afterwards? Thomas Hello, please follow this link to get your new class files installed. It is tip from Christian Ridderström found in www.mail-archive.com, which is by the way a good adress to find some answers to your questions! http://www.mail-archive.com/[EMAIL PROTECTED]/msg26417.html Thomas
Re: class package
/var/spool/mail/robinson schrieb: well i guess that's my question. where do i put these files? i've put em all over the place, and yes i run texhash and i reconfigure and then restart lyx. where do i put them so that lyx recongnises them so i can choose it as a style? __ On Sat, 18 Oct 2003, Thomas Schönhoff wrote: /var/spool/mail/robinson schrieb: Hello. I've just dloaded the style class for my disertation which was written for latex. I think I'm following the directions in the customization section in lyx to add it, but its not working. I wonder if there's a step by step howto somewhere, or can someone break it down step by step how to add a new style class. the tarball comes with a thesis.cls and a chicago.clo do i need anything else? thanks __ Hello, which directory did you copy these files too? Did you run a texhash (root) and reconfigure in LyX afterwards? Thomas Hello, please follow this link to get your new class files installed. It is tip from Christian Ridderström found in www.mail-archive.com, which is by the way a good adress to find some answers to your questions! http://www.mail-archive.com/[EMAIL PROTECTED]/msg26417.html Thomas
Re: class package
/var/spool/mail/robinson schrieb: well i guess that's my question. where do i put these files? i've put em all over the place, and yes i run texhash and i reconfigure and then restart lyx. where do i put them so that lyx recongnises them so i can choose it as a style? __ On Sat, 18 Oct 2003, Thomas Schönhoff wrote: /var/spool/mail/robinson schrieb: Hello. I've just dloaded the style class for my disertation which was written for latex. I think I'm following the directions in the customization section in lyx to add it, but its not working. I wonder if there's a step by step howto somewhere, or can someone break it down step by step how to add a new style class. the tarball comes with a thesis.cls and a chicago.clo do i need anything else? thanks __ Hello, which directory did you copy these files too? Did you run a "texhash" (root) and reconfigure in LyX afterwards? Thomas Hello, please follow this link to get your new class files installed. It is tip from Christian Ridderström found in www.mail-archive.com, which is by the way a good adress to find some answers to your questions! http://www.mail-archive.com/[EMAIL PROTECTED]/msg26417.html Thomas
Re: class package
/var/spool/mail/robinson schrieb: Hello. I've just dloaded the style class for my disertation which was written for latex. I think I'm following the directions in the customization section in lyx to add it, but its not working. I wonder if there's a step by step howto somewhere, or can someone break it down step by step how to add a new style class. the tarball comes with a thesis.cls and a chicago.clo do i need anything else? thanks __ Hello, which directory did you copy these files too? Did you run a texhash (root) and reconfigure in LyX afterwards? Thomas
Re: class package
/var/spool/mail/robinson schrieb: Hello. I've just dloaded the style class for my disertation which was written for latex. I think I'm following the directions in the customization section in lyx to add it, but its not working. I wonder if there's a step by step howto somewhere, or can someone break it down step by step how to add a new style class. the tarball comes with a thesis.cls and a chicago.clo do i need anything else? thanks __ Hello, which directory did you copy these files too? Did you run a texhash (root) and reconfigure in LyX afterwards? Thomas
Re: class package
/var/spool/mail/robinson schrieb: Hello. I've just dloaded the style class for my disertation which was written for latex. I think I'm following the directions in the customization section in lyx to add it, but its not working. I wonder if there's a step by step howto somewhere, or can someone break it down step by step how to add a new style class. the tarball comes with a thesis.cls and a chicago.clo do i need anything else? thanks __ Hello, which directory did you copy these files too? Did you run a "texhash" (root) and reconfigure in LyX afterwards? Thomas
Re: Problems installing LyX-1.3.3 on Debian Woody
Hello, htanks for your response! Matej Cepl schrieb: Thomas Schönhoff wrote: I am afraid there is something wrong with your /usr/share/lyx/configure, which should find out what's going on. I'll give it try tomorrow! greetings Thomas
Re: Problems installing LyX-1.3.3 on Debian Woody
Hello, htanks for your response! Matej Cepl schrieb: Thomas Schönhoff wrote: I am afraid there is something wrong with your /usr/share/lyx/configure, which should find out what's going on. I'll give it try tomorrow! greetings Thomas
Problems installing LyX-1.3.3 on Debian Woody
Hello, I've compiled and packaged LyX-1.3.3 for Woody by using checkinstall. Compilation (--with-qt3 option) went fine and building the deb was carried out successfully, but I went into troubles installing the resulting package with "dpkg -i lyx_1.3.3-1_i386.deb". Obiviousely dpkg refused to install LyX because it tried unsuccessfully to override the file /usr/share/texmf/fonts/type1/bluesky/cm/cmex10.pfb which is according to dpkg part of installed tetex-extra package. Here are my installed TeX packages: ii tetex-base 1.0.2+20011202 basic teTeX library files ii tetex-bin 1.0.7+20011202 teTeX binary files ii tetex-doc 1.0.2+20011202 teTeX documentation ii tetex-eurosym 1.0-3 Euro symbol for LaTeX ii tetex-extra1.0.2+20011202 extra teTeX library files Now I am kind of stuck, don't know where to go from here! Any ideas? Doing the same with LyX-1.3.2 just went fine, so I wonder what changed so profoundly in LyX-1.3.3 Thomas Btw: My first trial to send this message ended into nothingness, so I send it once again to get some response
Re: Problems installing LyX-1.3.3 on Debian Woody
Hello, htanks for your response! Matej Cepl schrieb: Thomas Schönhoff wrote: I am afraid there is something wrong with your /usr/share/lyx/configure, which should find out what's going on. I'll give it try tomorrow! greetings Thomas
Problems installing LyX-1.3.3 on Debian Woody
Hallo, I've compiled and packaged LyX-1.3.3 for Woody by using checkinstall. Compilation (--with-qt3 option) went fine and building the deb was carried out successfully, but I went into troubles installing the resulting package with "dpkg -i lyx_1.3.3-1_i386.deb". Obiviousely dpkg refused to install LyX because it tried unsuccessfully to override the file /usr/share/texmf/fonts/type1/bluesky/cm/cmex10.pfb which is according to dpkg part of installed tetex-extra package. Here are my installed TeX packages: ii tetex-base 1.0.2+20011202 basic teTeX library files ii tetex-bin 1.0.7+20011202 teTeX binary files ii tetex-doc 1.0.2+20011202 teTeX documentation ii tetex-eurosym 1.0-3 Euro symbol for LaTeX ii tetex-extra1.0.2+20011202 extra teTeX library files Now I am kind of stuck, don't know where to go from here! Any ideas? Doing the same with LyX-1.3.2 just went fine, so I wonder what changed so profoundly in LyX-1.3.3 Thomas
Re: Euro symbol not displayed in lyx
Holger Zebner wrote:
Hello,
I don't get the Euro symbol (ALT Gr+e) in Lyx with a document encoded
in latin9. When I oopen the testeuro example file I see only question
marks instead of € .
Is there any nice looking Euro symbol? I did not succeed in printing
it out with the bookman font as it was recommended.
Greetings & have a nice weekend
Holger
Hallo,
To handle this situation have a look at the mail archive :
http://www.mail-archive.com/cgi-bin/htsearch?method=and=short=lyx-users_lists_lyx_org===euro+symbol
Here is what I did with recommendations from this list:
Put in LaTeX preamble:
\usepackage[official,right]{eurosym}
\renewcommand{\texteuro}{\euro}
Make sure that latex package eurosym is installed and recognized by
LyX/LaTeX!
Enjoy
Thomas
ChkTeX and LyX-1.3.2
Hello, since a while Iam trying to make ChkTeX run without success! When running this from commandline everything is fine, chktex parses latex files without complaints. But, when running chktex from within LyX an error message is given: ChkTeX was not successful! Error while executing 'filename.tex' And ChkTeX seemingly does not work! That is not true, since ChkTeX runs from commandline smoothly!!! Another question comes to my mind!. After exporting my LyX file (germanized hollywood class) to latex, I received lots of warnings but no error messages. When trying to view the same file in LyX I receive 10 error messages and nothing is displayed (gv)!?? That is, latex refuses to convert the file to ps! What is a difference between messages of errors in LyX and warnings in ChkTeX? What can I do about this? Thomas LyX-1.3.2 ChkTeX 1.5-7
Re: compile error:missing moc binary
Andre Poenitz schrieb: On Thu, Mar 20, 2003 at 12:12:51PM +0100, Thomas Schönhoff wrote: I've never heard of a package named moc. Could someone tell me what is missing ? This is some Qt preprocessor (according to my understanding...) On my system it comes with the package qt-devel and is located in /usr/lib/qt-2.3.1/bin/moc Andre' Hello, thanks for quick response! Very curious, since LyX-qt-1.3.0 compiled without any complaints, not missing anything and work smoothly!? Obiviously somethings must have been changed, isn't it!? Thomas
Re: compile error:missing moc binary
Andre Poenitz schrieb: On Thu, Mar 20, 2003 at 12:12:51PM +0100, Thomas Schönhoff wrote: I've never heard of a package named moc. Could someone tell me what is missing ? This is some Qt preprocessor (according to my understanding...) On my system it comes with the package qt-devel and is located in /usr/lib/qt-2.3.1/bin/moc Andre' Hello, thanks for quick response! Very curious, since LyX-qt-1.3.0 compiled without any complaints, not missing anything and work smoothly!? Obiviously somethings must have been changed, isn't it!? Thomas
compile error:missing moc binary
Hi, I'll try to compile LyX-1.3.0-1 on Debian Woody for making a Debian package with checkinstall by using: /usr/local/sbin/checkinstall ./configure --with-frontend=qt Compilation ends up with this error message: configure: error: moc binary not found in $PATH or /bin ! I've never heard of a package named "moc". Could someone tell me what is missing ? Thomas
Re: compile error:missing moc binary
Andre Poenitz schrieb: On Thu, Mar 20, 2003 at 12:12:51PM +0100, Thomas Schönhoff wrote: I've never heard of a package named "moc". Could someone tell me what is missing ? This is some Qt preprocessor (according to my understanding...) On my system it comes with the package qt-devel and is located in /usr/lib/qt-2.3.1/bin/moc Andre' Hello, thanks for quick response! Very curious, since LyX-qt-1.3.0 compiled without any complaints, not missing anything and work smoothly!? Obiviously somethings must have been changed, isn't it!? Thomas
Using a patch from 1.30 too 13.1
Hello, I've LyX-QT-1.3.0 installed. I used to reinstall newerversions of LyX everytime they came out,but now I decided to use the provided patch. since I am new to this issueI am interested in advices, instructions on howto do it smoothly or a link containing any of this aspects! Thanks Thomas
Keybindings
Hello, I am trying to use French "arcons", i.e. I try to write Nachtcafe, but can't get the proper sign for the "arcon de whatever" (forgooten the true naming for the moment!) LyX-gt 1.3.0 is installed, using (default) cua binding. I have already tried to use META (META + ' at the same time, then typing e), SHIFT etc. to generate the wanted char, but was in bad luck!? How to achieve this? Greetings Thomas
Spellchecker once again
Hello, after switching from xforms to LyX-qt-1.3.0 I had some troubles to get running my spellchecker! Following the advice of Juergen I retrieved new GNU-Aspell and the German dictionary (aspell-de) packages. After building debs (for Woody) I installed these by using checkinstall. Everything went on smoothly, but finally I receive same old, weird error message, that LyX doesn't find a suitable wordlist to the tag"deutsch". Ok, so I tried to customize under preferences menue an appropriate wordlist (which actually reside in /usr/local/lib). Suprise, in preferences on "personal wordbook" I only find that LyX is looking for *.ispell files, which aren't install at default by aspell-0.50-3!! Here is /usr/local/lib/aspell ls de_CH.multi de_DE.multi de.multi deutsch.alias swiss.alias de_CH-only.rws de_DE-only.rws de-only.rws german.alias A global search on *.ispell ended up unsuccessfully!? Even Johns proprosal to make softlink form german to deutsch seems to be not working since there are no files named like this!? So this brings me back to my former question how to manage getting my spellchecker to work? Do I miss something!? cheers Thomas
Spellchecker once again
Hello, now things go on rapidly into dullness! I've compiled LyX-1.3.0 "./configure --with-qt --with-pspell on my Woody box! Whole process ended up making a deb file by using checkinstall, when trying to install this deb I get this error message: env LC_ALL=C dpkg -i lyx_1.3.0-1_i386.deb > (Reading database ... 100596 files and directories currently installed.) > Unpacking lyx (from lyx_1.3.0-1_i386.deb) ... > dpkg: error processing lyx_1.3.0-1_i386.deb (--install): > trying to overwrite > `/usr/share/texmf/fonts/type1/bluesky/cm/cmex10.pfb', which is also in > package tetex-extra > dpkg-deb: subprocess paste killed by signal (Broken pipe) > Errors were encountered while processing: > lyx_1.3.0-1_i386.deb I really stunned to note that LyX tries to override (/usr/share/texmf/fonts/type1/bluesky/cm/cmex10.pfb) a file which is actually installed by tetex-extra 1.0.2+20011202 installation! Hm, is this a bug? What to do now!? Thomas
backport aspell 0.50
Hello, if I catched things up correctly I am in urgend need to install the newest version of aspell (0.50 ?) to run spellcheck smoothly. Since Woody is based upon Aspell 0.33 I am looking for a backport of Aspell in its newest flavor! Does somebody know where to get this package (including libaspell and al other necessary stuff)? for Woody!?? cheers Thomas
Re: Configuration of lyx 1.3
Hello, Johannes Breu schrieb: Now the problem: I wish to modify some *.cls files (hollywood.cls for instance). Where do I have to put these files in the .lyx-directory that lyx recognises them. I only want to modify them for one user not for the whole system. Thanks, Johannes Breu All changes in /home/user/.lyx take effect for single users. If you change them globally you'll have to edit config-files in /usr/share/lyx Thomas
Re: Configuration of lyx 1.3
Hello, Johannes Breu schrieb: Now the problem: I wish to modify some *.cls files (hollywood.cls for instance). Where do I have to put these files in the .lyx-directory that lyx recognises them. I only want to modify them for one user not for the whole system. Thanks, Johannes Breu All changes in /home/user/.lyx take effect for single users. If you change them globally you'll have to edit config-files in /usr/share/lyx Thomas
Re: Configuration of lyx 1.3
Hello, Johannes Breu schrieb: Now the problem: I wish to modify some *.cls files (hollywood.cls for instance). Where do I have to put these files in the .lyx-directory that lyx recognises them. I only want to modify them for one user not for the whole system. Thanks, Johannes Breu All changes in /home/user/.lyx take effect for single users. If you change them globally you'll have to edit config-files in /usr/share/lyx Thomas
Re: spellchecking in LyX-1.3.0 (qt-GUI)
John Levon schrieb: On Sat, Mar 01, 2003 at 05:08:13PM +0100, Thomas Sch?nhoff wrote: Try making a symbolic link from german to deutsch in the directory /usr/lib/aspell (or /usr/local/lib/aspell), or use Alternative language in the LyX preferences regards john Hello John, thanks for response. Just for the sake of understanding: ls -l /usr/lib/aspell . . . -. deutsch.multi german.multi swiss.multi I've to generate a link from german.multi too deutsch.multi, isn't it!? regards Thomas
Re: spellchecking in LyX-1.3.0 (qt-GUI)
John Levon schrieb: On Sat, Mar 01, 2003 at 05:08:13PM +0100, Thomas Sch?nhoff wrote: Try making a symbolic link from german to deutsch in the directory /usr/lib/aspell (or /usr/local/lib/aspell), or use Alternative language in the LyX preferences regards john Hello John, thanks for response. Just for the sake of understanding: ls -l /usr/lib/aspell . . . -. deutsch.multi german.multi swiss.multi I've to generate a link from german.multi too deutsch.multi, isn't it!? regards Thomas
spellchecking in LyX-1.3.0 (qt-GUI)
Hello, I've just switched from 1.2.3 (compiled against libforms1) to 1.3.0 (qt-frontend). Besides some differences still to be explored by me I did encounter some difficulties in getting started: When starting spellchecking I receive this message: The spellchecker has failed I am sorry, I can't find suitable word lists for the language-tag: "deutsch" How to adjust LyX to find these word lists? I haven't any clue where these files reside!? Anybody to shed some light on this? I've installed Aspell 0.33.7.1-8, LyX-qt-1.3.0 on Debian-Woody (rc1) Thomas
Re: spellchecking in LyX-1.3.0 (qt-GUI)
John Levon schrieb: On Sat, Mar 01, 2003 at 05:08:13PM +0100, Thomas Sch?nhoff wrote: Try making a symbolic link from german to deutsch in the directory /usr/lib/aspell (or /usr/local/lib/aspell), or use "Alternative language" in the LyX preferences regards john Hello John, thanks for response. Just for the sake of understanding: ls -l /usr/lib/aspell . . . -. deutsch.multi german.multi swiss.multi I've to generate a link from "german.multi" too "deutsch.multi", isn't it!? regards Thomas
Re: upgrading 1.2.1 rpm to 1.2.3
Vinay Ramnath schrieb: Nope, didn't work. My C++ compiler doesn't seem to suffice. I use SuSE 8.0 with gcc as compiler. During configuration, the machine complaints that it cannot execute `cc1plus'. Which compiler do you recommend for compiling LyX. Does it have anything to do with libXpm. I didn't need it when I installed the rpm's, but I need it for the compilation. I just unpacked the package, there was nothing to install. Perhaps that has something to do with it, but it doesn't seem like it, since it only complaints about my C++ compiler. Any idea? Vinay Hello, in every case you are in need of devel-packages of xforms and related when recompiling your upgrade! Thomas
Re: upgrading 1.2.1 rpm to 1.2.3
Vinay Ramnath schrieb: Nope, didn't work. My C++ compiler doesn't seem to suffice. I use SuSE 8.0 with gcc as compiler. During configuration, the machine complaints that it cannot execute `cc1plus'. Which compiler do you recommend for compiling LyX. Does it have anything to do with libXpm. I didn't need it when I installed the rpm's, but I need it for the compilation. I just unpacked the package, there was nothing to install. Perhaps that has something to do with it, but it doesn't seem like it, since it only complaints about my C++ compiler. Any idea? Vinay Hello, in every case you are in need of devel-packages of xforms and related when recompiling your upgrade! Thomas
Re: upgrading 1.2.1 rpm to 1.2.3
Vinay Ramnath schrieb: Nope, didn't work. My C++ compiler doesn't seem to suffice. I use SuSE 8.0 with gcc as compiler. During configuration, the machine complaints that it cannot execute `cc1plus'. Which compiler do you recommend for compiling LyX. Does it have anything to do with libXpm. I didn't need it when I installed the rpm's, but I need it for the compilation. I just unpacked the package, there was nothing to install. Perhaps that has something to do with it, but it doesn't seem like it, since it only complaints about my C++ compiler. Any idea? Vinay Hello, in every case you are in need of devel-packages of xforms and related when recompiling your upgrade! Thomas
Re: Problem executing lyx
lec schrieb: Hi, When I try to run lyx, an error message is displayed: lyx: error while loading shared libraries: libflimage.so.1: cannot open shared object file: No such file or directory I've checked and the file libflimage.so.1 is in /usr/X11R6/lib What did I miss? Thanks, Thomas. Hello Thomas! Perhaps you did upgrade your libs before!? If so just try to run sbin/ldconfig and see if things cleared up! If not, there might be versioning problem! Thomas
Re: Problem executing lyx
lec schrieb: Hi, When I try to run lyx, an error message is displayed: lyx: error while loading shared libraries: libflimage.so.1: cannot open shared object file: No such file or directory I've checked and the file libflimage.so.1 is in /usr/X11R6/lib What did I miss? Thanks, Thomas. Hello Thomas! Perhaps you did upgrade your libs before!? If so just try to run sbin/ldconfig and see if things cleared up! If not, there might be versioning problem! Thomas
Re: Problem executing lyx
lec schrieb: Hi, When I try to run lyx, an error message is displayed: lyx: error while loading shared libraries: libflimage.so.1: cannot open shared object file: No such file or directory I've checked and the file libflimage.so.1 is in /usr/X11R6/lib What did I miss? Thanks, Thomas. Hello Thomas! Perhaps you did upgrade your libs before!? If so just try to run "sbin/ldconfig" and see if things cleared up! If not, there might be versioning problem! Thomas
defaults of keymap in LyX-1.2.1
Hello all, I just unsuccessfully tried to find out, what are the default settings of the keymap in LyX! I want to use circumflex and other accented letters like "a'" and alike. In former versions I remember to hit META, letter - Kombination followed by the accented sign. This obviously works differently in LyX-1.2.1, but how? Do I have to define a special keymap or may I achieve this without redefining the default keymap!? cheers Thomas -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: Spell-checker
Juergen Spitzmueller wrote: thomas schönhoff wrote: It is suguested to insert deutsch instead of german when running into trouble with spellchekcing! No. You have to insert deutsch for german documents with the german class (alte Rechtschreibung) and german for documents with the ngerman class (neue Rechtschreibung). Regards, Jürgen. Hello, yes you are right. I mixed something up. Sorry for that! Thomas
Re: Spell-checker
Juergen Spitzmueller wrote: thomas schönhoff wrote: It is suguested to insert deutsch instead of german when running into trouble with spellchekcing! No. You have to insert deutsch for german documents with the german class (alte Rechtschreibung) and german for documents with the ngerman class (neue Rechtschreibung). Regards, Jürgen. Hello, yes you are right. I mixed something up. Sorry for that! Thomas
Re: Spell-checker
Juergen Spitzmueller wrote: thomas schönhoff wrote: It is suguested to insert "deutsch" instead" of "german" when running into trouble with spellchekcing! No. You have to insert "deutsch" for german documents with the "german" class (alte Rechtschreibung) and "german" for documents with the "ngerman" class (neue Rechtschreibung). Regards, Jürgen. Hello, yes you are right. I mixed something up. Sorry for that! Thomas
Re: Spell-checker
Gerhard Lindel wrote: Hi ! I am using 1.2.0 on SuSE 8.1. and i have got a problem with the spell-checker: I cannopt start it! When I click the button there is no reaction. How do I have to do it? It is my first article with LYX. Gerhard Hello Gerhard, I guess you already have adjusted your language in layout -document - language. What did you take deutsch or german? It is suguested to insert deutsch instead of german when running into trouble with spellchekcing! Thomas
Re: Spell-checker
Gerhard Lindel wrote: Hi ! I am using 1.2.0 on SuSE 8.1. and i have got a problem with the spell-checker: I cannopt start it! When I click the button there is no reaction. How do I have to do it? It is my first article with LYX. Gerhard Hello Gerhard, I guess you already have adjusted your language in layout -document - language. What did you take deutsch or german? It is suguested to insert deutsch instead of german when running into trouble with spellchekcing! Thomas
Re: Spell-checker
Gerhard Lindel wrote: Hi ! I am using 1.2.0 on SuSE 8.1. and i have got a problem with the spell-checker: I cannopt start it! When I click the button there is no reaction. How do I have to do it? It is my first article with LYX. Gerhard Hello Gerhard, I guess you already have adjusted your language in layout ->document -> language. What did you take "deutsch" or "german"? It is suguested to insert "deutsch" instead" of "german" when running into trouble with spellchekcing! Thomas
Re: Who has RPMs for redhat 7.x? [please!]
Kayvan A. Sylvan wrote: On Sun, Nov 03, 2002 at 01:36:55PM -0500, Steve M. Robbins wrote: On Thu, Oct 31, 2002 at 08:09:18PM +0100, Thomas Templin wrote: On Thursday 31 October 2002 19:36, Kayvan A. Sylvan wrote: I would be happy to be the RPM coordinator. I just need a loose collection of people with different system setups who are willing to --rebuild the source rpm and send the results back to me. BTW, whats about *.deb Packages? *duck'n'run* :) Debian already has packages, though only for 1.1.6fixsomething, at the moment. I don't run debian, but isn't there some sort of alien program which can turn an RPM into a .deb? ---Kayvan There might be a good chance to create deb packages form tar.gz by using checkinstall. I did it serveral times and it worked. I don't know if these packages are really GNU/Linux compatible, at least I can report good experiences by creating RPMs which work well for RH7.2! Thomas
Re: Who has RPMs for redhat 7.x? [please!]
Kayvan A. Sylvan wrote: On Sun, Nov 03, 2002 at 01:36:55PM -0500, Steve M. Robbins wrote: On Thu, Oct 31, 2002 at 08:09:18PM +0100, Thomas Templin wrote: On Thursday 31 October 2002 19:36, Kayvan A. Sylvan wrote: I would be happy to be the RPM coordinator. I just need a loose collection of people with different system setups who are willing to --rebuild the source rpm and send the results back to me. BTW, whats about *.deb Packages? *duck'n'run* :) Debian already has packages, though only for 1.1.6fixsomething, at the moment. I don't run debian, but isn't there some sort of alien program which can turn an RPM into a .deb? ---Kayvan There might be a good chance to create deb packages form tar.gz by using checkinstall. I did it serveral times and it worked. I don't know if these packages are really GNU/Linux compatible, at least I can report good experiences by creating RPMs which work well for RH7.2! Thomas
Re: Who has RPMs for redhat 7.x? [please!]
Kayvan A. Sylvan wrote: On Sun, Nov 03, 2002 at 01:36:55PM -0500, Steve M. Robbins wrote: On Thu, Oct 31, 2002 at 08:09:18PM +0100, Thomas Templin wrote: On Thursday 31 October 2002 19:36, Kayvan A. Sylvan wrote: I would be happy to be the RPM coordinator. I just need a loose collection of people with different system setups who are willing to "--rebuild" the source rpm and send the results back to me. BTW, whats about *.deb Packages? *duck'n'run* :) Debian already has packages, though only for 1.1.6fixsomething, at the moment. I don't run debian, but isn't there some sort of "alien" program which can turn an RPM into a .deb? ---Kayvan There might be a good chance to create deb packages form tar.gz by using checkinstall. I did it serveral times and it worked. I don't know if these packages are really GNU/Linux compatible, at least I can report good experiences by creating RPMs which work well for RH7.2! Thomas
Re: Who has RPMs for redhat 7.x? [please!]
Hello, does somebody know where to grab the appropriate a xpm.scr.rpm to compile xforms1.0-RC5.2.src.rpm. successfully? Recent trials ended up in dependency problems (I previously run LyX-1.2.1 with xform0.89, so I have to refresh my installation before compiling needed LyX packages for RH) Thanks Thomas Jean-Marc Lasgouttes wrote: Thomas == Thomas Schönhoff [EMAIL PROTECTED] writes: I think it would be useful. Please try to make them against the xforms 1.0rc5.2 rpm in /pub/lyx/contrib. JMarc
Re: Who has RPMs for redhat 7.x? [please!]
Hello Kayvan, that's what I was taking a bet at, but no way. Compiler requires an appropriate xpm package? Here is translated citation of the related message: /usr/bin/ld: cannot find -lX11 collect2: ld returned 1 exit status + rm -f libXpm.so.4 + ln -f libXpm.so.4.11 libXpm.so.4 ln: acess to »libXpm.so.4.11«: file or directory not found make[1]: *** [libXpm.so.4.11] error 1 make[1]: *** waiting for still running processes ranlib libXpm.a make[1]: *** waiting for (like before) make[1]: *** waiting for make[1]: leaving diretories of directory »/usr/src/redhat/BUILD/xpm-3.4k/lib« make: *** [all] error 2 error: Bad exit status from /var/tmp/rpm-tmp.71714 (%build) Since libXpm.so.4.11 resides in /usr/X11R6/lib/ I guess another version is required !? Thomas Kayvan A. Sylvan wrote: You need to uninstall your previous xforms, then compile the xforms.src.rpm and it will work correctly.
Re: Who has RPMs for redhat 7.x? [please!]
Hello, I am running RH 7.2 and could provide binaries compiled with gcc-2.96-108.7.2. Would that be of any help, let me know! Thomas Jean-Marc Lasgouttes wrote: Seeing how so many people are angry trying to install Kayvan's rpms, I think we really need to provide something compiled with gcc 2.96. If anybody can provide these rpms to me (built from the .src.rpm of the site), please send them to me. Ask Kayvan for details if you want to know how to make them. JMarc
Re: Who has RPMs for redhat 7.x? [please!]
Hello, does somebody know where to grab the appropriate a xpm.scr.rpm to compile xforms1.0-RC5.2.src.rpm. successfully? Recent trials ended up in dependency problems (I previously run LyX-1.2.1 with xform0.89, so I have to refresh my installation before compiling needed LyX packages for RH) Thanks Thomas Jean-Marc Lasgouttes wrote: Thomas == Thomas Schönhoff [EMAIL PROTECTED] writes: I think it would be useful. Please try to make them against the xforms 1.0rc5.2 rpm in /pub/lyx/contrib. JMarc
Re: Who has RPMs for redhat 7.x? [please!]
Hello Kayvan, that's what I was taking a bet at, but no way. Compiler requires an appropriate xpm package? Here is translated citation of the related message: /usr/bin/ld: cannot find -lX11 collect2: ld returned 1 exit status + rm -f libXpm.so.4 + ln -f libXpm.so.4.11 libXpm.so.4 ln: acess to »libXpm.so.4.11«: file or directory not found make[1]: *** [libXpm.so.4.11] error 1 make[1]: *** waiting for still running processes ranlib libXpm.a make[1]: *** waiting for (like before) make[1]: *** waiting for make[1]: leaving diretories of directory »/usr/src/redhat/BUILD/xpm-3.4k/lib« make: *** [all] error 2 error: Bad exit status from /var/tmp/rpm-tmp.71714 (%build) Since libXpm.so.4.11 resides in /usr/X11R6/lib/ I guess another version is required !? Thomas Kayvan A. Sylvan wrote: You need to uninstall your previous xforms, then compile the xforms.src.rpm and it will work correctly.
Re: Who has RPMs for redhat 7.x? [please!]
Hello, I am running RH 7.2 and could provide binaries compiled with gcc-2.96-108.7.2. Would that be of any help, let me know! Thomas Jean-Marc Lasgouttes wrote: Seeing how so many people are angry trying to install Kayvan's rpms, I think we really need to provide something compiled with gcc 2.96. If anybody can provide these rpms to me (built from the .src.rpm of the site), please send them to me. Ask Kayvan for details if you want to know how to make them. JMarc
Re: Who has RPMs for redhat 7.x? [please!]
Hello, does somebody know where to grab the appropriate a xpm.scr.rpm to compile xforms1.0-RC5.2.src.rpm. successfully? Recent trials ended up in dependency problems (I previously run LyX-1.2.1 with xform0.89, so I have to refresh my installation before compiling needed LyX packages for RH) Thanks Thomas Jean-Marc Lasgouttes wrote: "Thomas" == Thomas Schönhoff <[EMAIL PROTECTED]> writes: I think it would be useful. Please try to make them against the xforms 1.0rc5.2 rpm in /pub/lyx/contrib. JMarc
Re: Who has RPMs for redhat 7.x? [please!]
Hello Kayvan, that's what I was taking a bet at, but no way. Compiler requires an appropriate xpm package? Here is translated citation of the related message: /usr/bin/ld: cannot find -lX11 collect2: ld returned 1 exit status + rm -f libXpm.so.4 + ln -f libXpm.so.4.11 libXpm.so.4 ln: acess to »libXpm.so.4.11«: file or directory not found make[1]: *** [libXpm.so.4.11] error 1 make[1]: *** waiting for still running processes ranlib libXpm.a make[1]: *** waiting for (like before) make[1]: *** waiting for make[1]: leaving diretories of directory »/usr/src/redhat/BUILD/xpm-3.4k/lib« make: *** [all] error 2 error: Bad exit status from /var/tmp/rpm-tmp.71714 (%build) Since libXpm.so.4.11 resides in /usr/X11R6/lib/ I guess another version is required !? Thomas Kayvan A. Sylvan wrote: You need to uninstall your previous xforms, then compile the xforms.src.rpm and it will work correctly.
Re: Who has RPMs for redhat 7.x? [please!]
Hello, I am running RH 7.2 and could provide binaries compiled with gcc-2.96-108.7.2. Would that be of any help, let me know! Thomas Jean-Marc Lasgouttes wrote: Seeing how so many people are angry trying to install Kayvan's rpms, I think we really need to provide something compiled with gcc 2.96. If anybody can provide these rpms to me (built from the .src.rpm of the site), please send them to me. Ask Kayvan for details if you want to know how to make them. JMarc
Re: Redhat install: libforms RPM
Hello, Lars Jensen schrieb: When I try to install lyx1.2.1 on my Redhat 6.2, I get the following error: libforms.so.088 is needed by lyx-1.2.1-1 libstdc++-libc6.1-2.so3 is needed by lyx-1.2.1-1 What rpm's do I need for this? I can't seem to find them on the lyx related software site. I already installed xforms on my system. There seem to be more dependencies than simply xforms that must be satisfied to install lyx. Thanks, Lars. %%% Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999. Tel: 775.673.7113 E-mail: [EMAIL PROTECTED] Did you also install liXpm and xforms-devel ? Are these packages also installed: libstdc++ and libstdc++-devel Perhaps you also need compat-libstdc++.rpm Thomas
Re: Redhat install: libforms RPM
Hello, Lars Jensen schrieb: When I try to install lyx1.2.1 on my Redhat 6.2, I get the following error: libforms.so.088 is needed by lyx-1.2.1-1 libstdc++-libc6.1-2.so3 is needed by lyx-1.2.1-1 What rpm's do I need for this? I can't seem to find them on the lyx related software site. I already installed xforms on my system. There seem to be more dependencies than simply xforms that must be satisfied to install lyx. Thanks, Lars. %%% Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999. Tel: 775.673.7113 E-mail: [EMAIL PROTECTED] Did you also install liXpm and xforms-devel ? Are these packages also installed: libstdc++ and libstdc++-devel Perhaps you also need compat-libstdc++.rpm Thomas
Re: Redhat install: libforms RPM
Hello, Lars Jensen schrieb: > When I try to install lyx1.2.1 on my Redhat 6.2, I get the > following error: > > libforms.so.088 is needed by lyx-1.2.1-1 > libstdc++-libc6.1-2.so3 is needed by lyx-1.2.1-1 > > What rpm's do I need for this? I can't seem to find them on the lyx > "related software" site. > > I already installed xforms on my system. There seem to be more > dependencies than simply xforms that must be satisfied to install lyx. > > Thanks, > Lars. > > > %%% > Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999. > Tel: 775.673.7113 E-mail: [EMAIL PROTECTED] > Did you also install liXpm and xforms-devel ? Are these packages also installed: libstdc++ and libstdc++-devel Perhaps you also need compat-libstdc++.rpm Thomas
no french spellchecking
Hello, after enhancing aspell to french correction spellchekcing dos not working properly in LyX-1.2.0, aspell 0.33.7alpha works well in LyX for German and English spelling only !! After compiling the french wordbook frome source without any problems, doing a texhash, reconfigure in LyX nothing happens, that is: No error messages are given, LyX seems to freeze for a moment and continues to run again after about 30 seconds. Does someone know what's wrong and how to come across ? Thomas
Re: no french spellchecking
Juergen Spitzmueller wrote: thomas schönhoff wrote: Try in the spellchecker options: alternative language - francais Jürgen. Hello Jürgen, I now know what was going wrong, there are 2 sets for French in the selection dialog. I simply selected the wrong French dictionary, when changing this via Layout - document - language too GUTenberg-French everything went fine! Thanks for response Thomas
no french spellchecking
Hello, after enhancing aspell to french correction spellchekcing dos not working properly in LyX-1.2.0, aspell 0.33.7alpha works well in LyX for German and English spelling only !! After compiling the french wordbook frome source without any problems, doing a texhash, reconfigure in LyX nothing happens, that is: No error messages are given, LyX seems to freeze for a moment and continues to run again after about 30 seconds. Does someone know what's wrong and how to come across ? Thomas
Re: no french spellchecking
Juergen Spitzmueller wrote: thomas schönhoff wrote: Try in the spellchecker options: alternative language - francais Jürgen. Hello Jürgen, I now know what was going wrong, there are 2 sets for French in the selection dialog. I simply selected the wrong French dictionary, when changing this via Layout - document - language too GUTenberg-French everything went fine! Thanks for response Thomas
no french spellchecking
Hello, after enhancing aspell to french correction spellchekcing dos not working properly in LyX-1.2.0, aspell 0.33.7alpha works well in LyX for German and English spelling only !! After compiling the french wordbook frome source without any problems, doing a "texhash", "reconfigure" in LyX nothing happens, that is: No error messages are given, LyX seems to freeze for a moment and continues to run again after about 30 seconds. Does someone know what's wrong and how to come across ? Thomas
Re: no french spellchecking
Juergen Spitzmueller wrote: > thomas schönhoff wrote: > > Try in the spellchecker options: > "alternative language -> francais" > > Jürgen. Hello Jürgen, I now know what was going wrong, there are 2 sets for French in the selection dialog. I simply selected the wrong French dictionary, when changing this via "Layout -> document -> language too GUTenberg-French everything went fine! Thanks for response Thomas
Re: conversion to linuxdoc
José Abílio Oliveira Matos wrote: On Sat, Jul 20, 2002 at 03:44:22PM +0200, thomas schönhoff wrote: Hello, this is related to LyX-1.2.0 . I just wanted to start creating a file and convert this to Linuxdoc-format as described in help docs. So I unsuccessfully browsed Herbert's website and finally took a glimpse at the mailarchive. Surprisinlgy there seems to be no export dialog for Linuxdoc in LyX-1.2.0, I am not quite sure but pretend to remember one in former LyX-!.1.6fix4 !? Did you change the document layout to linuxdoc? Layout - Document - Class: linuxdoc This is working here. Perhaps there is somebody on this list to shed some light on these mysteries to create Linuxdoc documents with LyX !! BTW, required SGML-Tools 1.0.9-12 are installed and I did not find any hint which option in LyX(Preferences) might lead to use LinuxDoc (only found Linux_doc within import dialog!) This shows that LyX found the linuxdoc support. Thanks in advance for any hint ! If you select the right class then I am really lost, so I bet the you forgot it. ;-) I hope it helps, and it works. :-) Thomas Hallo, that clear things up the way I wished to...:-)) Thanks Thomas
Re: conversion to linuxdoc
José Abílio Oliveira Matos wrote: On Sat, Jul 20, 2002 at 03:44:22PM +0200, thomas schönhoff wrote: Hello, this is related to LyX-1.2.0 . I just wanted to start creating a file and convert this to Linuxdoc-format as described in help docs. So I unsuccessfully browsed Herbert's website and finally took a glimpse at the mailarchive. Surprisinlgy there seems to be no export dialog for Linuxdoc in LyX-1.2.0, I am not quite sure but pretend to remember one in former LyX-!.1.6fix4 !? Did you change the document layout to linuxdoc? Layout - Document - Class: linuxdoc This is working here. Perhaps there is somebody on this list to shed some light on these mysteries to create Linuxdoc documents with LyX !! BTW, required SGML-Tools 1.0.9-12 are installed and I did not find any hint which option in LyX(Preferences) might lead to use LinuxDoc (only found Linux_doc within import dialog!) This shows that LyX found the linuxdoc support. Thanks in advance for any hint ! If you select the right class then I am really lost, so I bet the you forgot it. ;-) I hope it helps, and it works. :-) Thomas Hallo, that clear things up the way I wished to...:-)) Thanks Thomas
Re: conversion to linuxdoc
José Abílio Oliveira Matos wrote: > On Sat, Jul 20, 2002 at 03:44:22PM +0200, thomas schönhoff wrote: > >>Hello, >> >>this is related to LyX-1.2.0 . >>I just wanted to start creating a file and convert this to >>Linuxdoc-format as described in help docs. >>So I unsuccessfully browsed Herbert's website and finally >>took a glimpse at the mailarchive. >>Surprisinlgy there seems to be no export dialog for Linuxdoc >>in LyX-1.2.0, I am not quite sure but pretend to remember >>one in former LyX-!.1.6fix4 !? >> > > Did you change the document layout to linuxdoc? > Layout -> Document -> Class: linuxdoc > > This is working here. > > >>Perhaps there is somebody on this list to shed some light on >> these mysteries to create Linuxdoc documents with LyX !! >> >>BTW, required SGML-Tools 1.0.9-12 are installed and I did >>not find any hint which option in LyX(Preferences) might >>lead to use LinuxDoc (only found Linux_doc within import >>dialog!) >> > > This shows that LyX found the linuxdoc support. > > >>Thanks in advance for any hint ! >> > > If you select the right class then I am really lost, so I bet the > you forgot it. ;-) > > I hope it helps, and it works. :-) > >>Thomas >> > Hallo, that clear things up the way I wished to...:-)) Thanks Thomas
Re: crash on opening document
gdb ./lyx (gdb) run [load the file] ...crash... (gdb) bt JMarc Hello, maybe it should be a problem having xforms-0.88 installed instead of a 0.89 version !? Did you try to run LyX with 0.89-3, runs fine here without any gotchas on RH7.2 box Thomas
Re: crash on opening document
gdb ./lyx (gdb) run [load the file] ...crash... (gdb) bt JMarc Hello, maybe it should be a problem having xforms-0.88 installed instead of a 0.89 version !? Did you try to run LyX with 0.89-3, runs fine here without any gotchas on RH7.2 box Thomas
Re: crash on opening document
>>gdb ./lyx >>(gdb) run >>[load the file] >>...crash... >>(gdb) bt >> >>JMarc >> >> > Hello, maybe it should be a problem having xforms-0.88 installed instead of a 0.89 version !? Did you try to run LyX with 0.89-3, runs fine here without any gotchas on RH7.2 box Thomas
charsets with LyX-1.2.0
Hello, I wonder how to get a certain char ^ in LyX-1.2.0, at the moment I am only able to cut and paste from the clipboard!? Is this depend on X-configuration or LyX customization, namely the proper selection of keymap and related charsets ? BTW: The char ^ is comfortable displayed in the xterm(console) Any hints? Gracefully Thomas
Re: charsets with LyX-1.2.0
Andre Poenitz wrote: On Thu, Jul 04, 2002 at 04:06:34PM +0200, thomas schönhoff wrote: What do you get? Can you enter it using the minibuffer? (self-insert ^) Andre' Hello André, this is what I get when running: lyx -dbg 4 and pressing the ^ button: Setze Debug-Level auf 4 Analysiere `key' (Verarbeitung von Tastatureingaben) WorkArea: Key is `' [0] WorkArea: Keysym is `dead_circumflex' [65106] This is obviously different from yours, so I guess this might be a config problem, isn't it? Is this possibly a consequence of wrong selection of .bind file (still default, I think cua-binding) I have choosen Generic 105-key (Intl)PC in X regards Thomas
charsets with LyX-1.2.0
Hello, I wonder how to get a certain char ^ in LyX-1.2.0, at the moment I am only able to cut and paste from the clipboard!? Is this depend on X-configuration or LyX customization, namely the proper selection of keymap and related charsets ? BTW: The char ^ is comfortable displayed in the xterm(console) Any hints? Gracefully Thomas
Re: charsets with LyX-1.2.0
Andre Poenitz wrote: On Thu, Jul 04, 2002 at 04:06:34PM +0200, thomas schönhoff wrote: What do you get? Can you enter it using the minibuffer? (self-insert ^) Andre' Hello André, this is what I get when running: lyx -dbg 4 and pressing the ^ button: Setze Debug-Level auf 4 Analysiere `key' (Verarbeitung von Tastatureingaben) WorkArea: Key is `' [0] WorkArea: Keysym is `dead_circumflex' [65106] This is obviously different from yours, so I guess this might be a config problem, isn't it? Is this possibly a consequence of wrong selection of .bind file (still default, I think cua-binding) I have choosen Generic 105-key (Intl)PC in X regards Thomas
charsets with LyX-1.2.0
Hello, I wonder how to get a certain char ^ in LyX-1.2.0, at the moment I am only able to cut and paste from the clipboard!? Is this depend on X-configuration or LyX customization, namely the proper selection of keymap and related charsets ? BTW: The char ^ is comfortable displayed in the xterm(console) Any hints? Gracefully Thomas
Re: charsets with LyX-1.2.0
Andre Poenitz wrote: > On Thu, Jul 04, 2002 at 04:06:34PM +0200, thomas schönhoff wrote: > > What do you get? > > > > > Can you enter it using the minibuffer? (self-insert ^) > > Andre' > > Hello André, this is what I get when running: lyx -dbg 4 and pressing the ^ button: Setze Debug-Level auf 4 Analysiere `key' (Verarbeitung von Tastatureingaben) WorkArea: Key is `' [0] WorkArea: Keysym is `dead_circumflex' [65106] This is obviously different from yours, so I guess this might be a config problem, isn't it? Is this possibly a consequence of wrong selection of .bind file (still default, I think cua-binding) I have choosen "Generic 105-key (Intl)PC in X regards Thomas
Re: none swap
Nico Mock wrote: On Monday 27 May 2002 12:54, you wrote: Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: none swap foo.ps . So no view of output seems to be possible! This happens to help-docs as my own files as well [snip] Have u choosen gv -swap as the ps - file viewer under Bearbeiten - Einstellungen - Formatkonvertierung ? That should fix it, I had the same problem just a few minutes ago :) Nico Hello NIco, that works well..:-)) Thomas
Re: none swap
Nico Mock wrote: On Monday 27 May 2002 12:54, you wrote: Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: none swap foo.ps . So no view of output seems to be possible! This happens to help-docs as my own files as well [snip] Have u choosen gv -swap as the ps - file viewer under Bearbeiten - Einstellungen - Formatkonvertierung ? That should fix it, I had the same problem just a few minutes ago :) Nico Hello NIco, that works well..:-)) Thomas
Re: none swap
Nico Mock wrote: > On Monday 27 May 2002 12:54, you wrote: > >>Hello all LyXers, >> >> >>I am facing a very strange problem here: Everytime I start LaTeX from >>inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings >>happens except a notice at the status bar at the bottom: command is >>executed: "none swap foo.ps ". So no view of output seems to be >>possible! This happens to help-docs as my own files as well >> > > [snip] > > Have u choosen gv -swap as the ps - file viewer under Bearbeiten -> > Einstellungen -> Formatkonvertierung ? > > That should fix it, I had the same problem just a few minutes ago :) > > Nico > > Hello NIco, that works well..:-)) Thomas
none swap
Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: none swap foo.ps . So no view of output seems to be possible! This happens to help-docs as my own files as well ! Ghostscript 6.51-16 and ghostscript-fonts 5.50-3 are installed. Furthermore: When trying the same procedure from inside of LyX to display own files in the path /home/thomas/mydocs/arbeit/artikel/latest/ LaTeX is complaining about unacceptable whitespaces in path name. Does anyone have an idea how to manage this.? Thomas
none swap
Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: none swap foo.ps . So no view of output seems to be possible! This happens to help-docs as my own files as well ! Ghostscript 6.51-16 and ghostscript-fonts 5.50-3 are installed. Furthermore: When trying the same procedure from inside of LyX to display own files in the path /home/thomas/mydocs/arbeit/artikel/latest/ LaTeX is complaining about unacceptable whitespaces in path name. Does anyone have an idea how to manage this.? Thomas
none swap
Hello all LyXers, I am facing a very strange problem here: Everytime I start LaTeX from inside of LyX-1.1.6fix4 to display my text in gv 3.5.8-13 nothings happens except a notice at the status bar at the bottom: command is executed: "none swap foo.ps ". So no view of output seems to be possible! This happens to help-docs as my own files as well ! Ghostscript 6.51-16 and ghostscript-fonts 5.50-3 are installed. Furthermore: When trying the same procedure from inside of LyX to display own files in the path /home/thomas/mydocs/arbeit/artikel/latest/ LaTeX is complaining about unacceptable whitespaces in path name. Does anyone have an idea how to manage this.? Thomas
Re: Problems installing lyx
Francisco Useche wrote: Hi: I am trying to install lyx in - Os= redhat linux 7.2 Version= lyx-1.1.6fix3 Problem: - I untared the file lyx-1.1.6fix3.tar - Then proceded to execute the command ./configure as is said in the INSTALL file - It aborts the configuration because it cannot find the library libforms or libxforms - Under the directory xforms/FORMS/ in the lyx directory there is the library libforms.a - I made a link to this library from both /usr/lib and /usr/local/lib with the name libforms as apparently is expected by ./configure, but it still cannot find the libraries. Could somebody tell me what is the trick to install successfully lyx under this conditions? Any help is welcome Thanks Francisco Hello Francisco, could you tell us what version of Xforms are installed? Sounds like your version might be incorrect! Are there any profound reasons for not using LyX-1.1.6fix4 instaead of fix3 ? Thomas
Re: Problems installing lyx
Francisco Useche wrote: Hi: I am trying to install lyx in - Os= redhat linux 7.2 Version= lyx-1.1.6fix3 Problem: - I untared the file lyx-1.1.6fix3.tar - Then proceded to execute the command ./configure as is said in the INSTALL file - It aborts the configuration because it cannot find the library libforms or libxforms - Under the directory xforms/FORMS/ in the lyx directory there is the library libforms.a - I made a link to this library from both /usr/lib and /usr/local/lib with the name libforms as apparently is expected by ./configure, but it still cannot find the libraries. Could somebody tell me what is the trick to install successfully lyx under this conditions? Any help is welcome Thanks Francisco Hello Francisco, could you tell us what version of Xforms are installed? Sounds like your version might be incorrect! Are there any profound reasons for not using LyX-1.1.6fix4 instaead of fix3 ? Thomas
Re: Problems installing lyx
Francisco Useche wrote: > Hi: > > I am trying to install lyx in > - Os= redhat linux 7.2 > > Version= lyx-1.1.6fix3 > > Problem: > - I untared the file lyx-1.1.6fix3.tar > - Then proceded to execute the command ./configure as is said in the > INSTALL file > - It aborts the configuration because it cannot find the library > libforms or libxforms > - Under the directory xforms/FORMS/ in the lyx directory there is the > library libforms.a > - I made a link to this library from both /usr/lib and /usr/local/lib > with the name libforms as apparently is expected by ./configure, but > it still cannot find the libraries. > > Could somebody tell me what is the trick to install successfully lyx under > this conditions? > > Any help is welcome > > Thanks > Francisco > > Hello Francisco, could you tell us what version of Xforms are installed? Sounds like your version might be incorrect! Are there any profound reasons for not using LyX-1.1.6fix4 instaead of fix3 ? Thomas
Re: A Newsgroup For LyX
Hello, I am quite agree to keep the mailing list and if aprreciated a news server. Butthe latters premise is that everybody has access to news server (isn't?, as has been mentioned before by someone on this list). In every case I vividly wish to keep this helpful list running! Cheers Thomas
Re: A Newsgroup For LyX
Hello, I am quite agree to keep the mailing list and if aprreciated a news server. Butthe latters premise is that everybody has access to news server (isn't?, as has been mentioned before by someone on this list). In every case I vividly wish to keep this helpful list running! Cheers Thomas
Re: A Newsgroup For LyX
Hello, I am quite agree to keep the mailing list and if aprreciated a news server. Butthe latters premise is that everybody has access to news server (isn't?, as has been mentioned before by someone on this list). In every case I vividly wish to keep this helpful list running! Cheers Thomas > >
Linebreak in tables
Hello, Iam using Lyx-1.1.6fix4 and trying to layout my longtable (without a float).I want to break lines in all cells of my table. As it is said in the docs you have to launch the dialog on tables and define the width of a column and text will automatically layouted as wanted. So I insert a 10cm to invoke linebreaking but nothing happens!? Everytime I come back to tables dialog the inserted 10cm has disappeared. Differently to Lyx-1.1.6fix3 (where there was obviously an option for linebreak within table cells as I remember)I miss/couldn't find this option in Lyx-1.1.6fix4. So my questions : 1. is the linebreak-option definitely gone? (at least where to find it?) 2. how to manage linebreaks in tables in Lyx-1.1.6fix4 generally? 3. Any idea why the inserted width of 10cm in tables dialog diseappears repeatedly? cheers Thomas
Re: Linebreak in tables
Hello Guenter, Guenter Milde wrote: On Wed, 06 Mar 2002 11:57:43 +0100 wrote thomas schönhoff [EMAIL PROTECTED]: So my questions : 3. Any idea why the inserted width of 10cm in tables dialog diseappears repeatedly? I had this problem also in 1.1.6fix2, ~fix3. The behaviour of the popup dialog is a little bit odd. If I remember right, you need to TAB from the 10cm-field to another field to make the setting permanent (it will vanish if you just [save] after inserting the fixed width). Thats what I did observe, I meanwhile found out that clicking at another item within the dialog will do the trick :-)) Although it is rather difficult this is difficult way to adjust the column width according to appropriate text wrapping (i.e. looks very ugly in PS, strange hypenation and alike!) The next oddity is, that linebreaks with Ctrl-Enter will just change the Look-On-Screen (again, if I remember right) and not go to the output. while the autmatic line-wrapping occures only in the dvi output. This is very curious because when writing my diploma with Lyx sometime ago everythingwas really fine, especially the automatic line wrapping. In my current file a crtl and ENTER) gives normal linebreaks (not really fine but much better than adjusting text wrapping over column width. Perhaps I am totally wrong but earlier versions of Lyx worked better in setting tables, at least for me ! ;-) Thanks for response Thomas BTW: CRTL.and ENTER combination actually breaks the lines in Lyx as well as in GV Guenter -- [EMAIL PROTECTED]
Linebreak in tables
Hello, Iam using Lyx-1.1.6fix4 and trying to layout my longtable (without a float).I want to break lines in all cells of my table. As it is said in the docs you have to launch the dialog on tables and define the width of a column and text will automatically layouted as wanted. So I insert a 10cm to invoke linebreaking but nothing happens!? Everytime I come back to tables dialog the inserted 10cm has disappeared. Differently to Lyx-1.1.6fix3 (where there was obviously an option for linebreak within table cells as I remember)I miss/couldn't find this option in Lyx-1.1.6fix4. So my questions : 1. is the linebreak-option definitely gone? (at least where to find it?) 2. how to manage linebreaks in tables in Lyx-1.1.6fix4 generally? 3. Any idea why the inserted width of 10cm in tables dialog diseappears repeatedly? cheers Thomas
Re: Linebreak in tables
Hello Guenter, Guenter Milde wrote: On Wed, 06 Mar 2002 11:57:43 +0100 wrote thomas schönhoff [EMAIL PROTECTED]: So my questions : 3. Any idea why the inserted width of 10cm in tables dialog diseappears repeatedly? I had this problem also in 1.1.6fix2, ~fix3. The behaviour of the popup dialog is a little bit odd. If I remember right, you need to TAB from the 10cm-field to another field to make the setting permanent (it will vanish if you just [save] after inserting the fixed width). Thats what I did observe, I meanwhile found out that clicking at another item within the dialog will do the trick :-)) Although it is rather difficult this is difficult way to adjust the column width according to appropriate text wrapping (i.e. looks very ugly in PS, strange hypenation and alike!) The next oddity is, that linebreaks with Ctrl-Enter will just change the Look-On-Screen (again, if I remember right) and not go to the output. while the autmatic line-wrapping occures only in the dvi output. This is very curious because when writing my diploma with Lyx sometime ago everythingwas really fine, especially the automatic line wrapping. In my current file a crtl and ENTER) gives normal linebreaks (not really fine but much better than adjusting text wrapping over column width. Perhaps I am totally wrong but earlier versions of Lyx worked better in setting tables, at least for me ! ;-) Thanks for response Thomas BTW: CRTL.and ENTER combination actually breaks the lines in Lyx as well as in GV Guenter -- [EMAIL PROTECTED]
Linebreak in tables
Hello, Iam using Lyx-1.1.6fix4 and trying to layout my "longtable" (without a float).I want to break lines in all cells of my table. As it is said in the docs you have to launch the dialog on tables and define the width of a column and text will automatically layouted as wanted. So I insert a "10cm" to invoke linebreaking but nothing happens!? Everytime I come back to tables dialog the inserted "10cm" has disappeared. Differently to Lyx-1.1.6fix3 (where there was obviously an option for linebreak within table cells as I remember)I miss/couldn't find this option in Lyx-1.1.6fix4. So my questions : 1. is the linebreak-option definitely gone? (at least where to find it?) 2. how to manage linebreaks in tables in Lyx-1.1.6fix4 generally? 3. Any idea why the inserted width of "10cm" in tables dialog diseappears repeatedly? cheers Thomas
Re: Linebreak in tables
Hello Guenter, Guenter Milde wrote: > On Wed, 06 Mar 2002 11:57:43 +0100 wrote thomas schönhoff ><[EMAIL PROTECTED]>: > > >>So my questions : >> > > >>3. Any idea why the inserted width of "10cm" in tables dialog >>diseappears repeatedly? >> > > I had this problem also in 1.1.6fix2, ~fix3. The behaviour of the popup > dialog is a little bit odd. If I remember right, you need to TAB from the > 10cm-field to another field to make the setting permanent (it will vanish if > you just [save] after inserting the fixed width). Thats what I did observe, I meanwhile found out that clicking at another item within the dialog will do the trick :-)) Although it is rather difficult this is difficult way to adjust the column width according to appropriate text wrapping (i.e. looks very ugly in PS, strange hypenation and alike!) > > The next oddity is, that linebreaks with Ctrl-Enter will just change the > Look-On-Screen (again, if I remember right) and not go to the output. while > the autmatic line-wrapping occures only in the dvi output. This is very curious because when writing my diploma with Lyx sometime ago everythingwas really fine, especially the automatic line wrapping. In my current file a "crtl and ENTER) gives normal linebreaks (not really fine but much better than adjusting text wrapping over column width. Perhaps I am totally wrong but earlier versions of Lyx worked better in setting tables, at least for me ! ;-) Thanks for response Thomas BTW: CRTL.and ENTER combination actually breaks the lines in Lyx as well as in GV > Guenter > > -- > [EMAIL PROTECTED] > >
2 Questions
Hello all LyXers,
I've just installed LyX-1.1.6fix4 and as before I really like very much
(special thanks to the developers and Matej, who gracefully compiled the
sources for RH7.0 and provided the appropriate xforms version!!!)
First I made a curious oberservation:
When pushing the menue button of save the button stays pushed after
the acutal saving process has ceased! (I am not quite sure if this is
really a bug, but hasn't oberserved before in fix3)
Secondly:
I wish to nest a items in a description enviroment which is splendidly
explained in the docs (!)
It should look like this:
1. description
# itemize
#item
#item
2. description
and so on
Unfortunately whenever I start to use the descritption enviroment,
counting starts with 1. again.
I would prefer a continious counter like description 1., 2., 3. and so
on...!
In case of staying unclear I have added an examplefile!
Does anybody know how to make this thing go?
I already had a look at Herberts Website and inserted
\renewcommand\labelenumi{\Alph{enumi}}
\renewcommand\labelenumii{\Alph{enumi}-\Alph{enumii}}
in latex preamble to change enumerationsstyle, without reaching
successful ends.although this is what I wanted on base of numbers
Greets
Thomas
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\language ngerman
\inputencoding auto
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle default
\layout Title
bla
\layout Author
Thomas
\layout Part
The way of nesting things in Lyx
\layout Enumerate
Description starts with 1.
\layout Itemize
Itemize
\begin_deeper
\layout Itemize
M a - gave me this nest
\layout Itemize
same
\layout Itemize
always the same
\end_deeper
\layout Enumerate
Unfortunately description starts again 1.
:-( but should continue with 2.
and so on)
\the_end
[Fwd: 2 Questions]
Sorry it should have been said that it is rather enumerate than description, sorry for confusion Somy question relates to enumerationstyle!! Greets Thomas #LyX 1.1 created this file. For more info see http://www.lyx.org/ \lyxformat 218 \textclass article \language ngerman \inputencoding auto \fontscheme default \graphics default \paperfontsize default \spacing single \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default \layout Title bla \layout Author Thomas \layout Part The way of nesting things in Lyx \layout Enumerate Description starts with 1. \layout Itemize Itemize \begin_deeper \layout Itemize M a - gave me this nest \layout Itemize same \layout Itemize always the same \end_deeper \layout Enumerate Unfortunately description starts again 1. :-( but should continue with 2. and so on) \the_end
2 Questions
Hello all LyXers,
I've just installed LyX-1.1.6fix4 and as before I really like very much
(special thanks to the developers and Matej, who gracefully compiled the
sources for RH7.0 and provided the appropriate xforms version!!!)
First I made a curious oberservation:
When pushing the menue button of save the button stays pushed after
the acutal saving process has ceased! (I am not quite sure if this is
really a bug, but hasn't oberserved before in fix3)
Secondly:
I wish to nest a items in a description enviroment which is splendidly
explained in the docs (!)
It should look like this:
1. description
# itemize
#item
#item
2. description
and so on
Unfortunately whenever I start to use the descritption enviroment,
counting starts with 1. again.
I would prefer a continious counter like description 1., 2., 3. and so
on...!
In case of staying unclear I have added an examplefile!
Does anybody know how to make this thing go?
I already had a look at Herberts Website and inserted
\renewcommand\labelenumi{\Alph{enumi}}
\renewcommand\labelenumii{\Alph{enumi}-\Alph{enumii}}
in latex preamble to change enumerationsstyle, without reaching
successful ends.although this is what I wanted on base of numbers
Greets
Thomas
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\language ngerman
\inputencoding auto
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle default
\layout Title
bla
\layout Author
Thomas
\layout Part
The way of nesting things in Lyx
\layout Enumerate
Description starts with 1.
\layout Itemize
Itemize
\begin_deeper
\layout Itemize
M a - gave me this nest
\layout Itemize
same
\layout Itemize
always the same
\end_deeper
\layout Enumerate
Unfortunately description starts again 1.
:-( but should continue with 2.
and so on)
\the_end
[Fwd: 2 Questions]
Sorry it should have been said that it is rather enumerate than description, sorry for confusion Somy question relates to enumerationstyle!! Greets Thomas #LyX 1.1 created this file. For more info see http://www.lyx.org/ \lyxformat 218 \textclass article \language ngerman \inputencoding auto \fontscheme default \graphics default \paperfontsize default \spacing single \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default \layout Title bla \layout Author Thomas \layout Part The way of nesting things in Lyx \layout Enumerate Description starts with 1. \layout Itemize Itemize \begin_deeper \layout Itemize M a - gave me this nest \layout Itemize same \layout Itemize always the same \end_deeper \layout Enumerate Unfortunately description starts again 1. :-( but should continue with 2. and so on) \the_end
2 Questions
Hello all LyXers,
I've just installed LyX-1.1.6fix4 and as before I really like very much
(special thanks to the developers and Matej, who gracefully compiled the
sources for RH7.0 and provided the appropriate xforms version!!!)
First I made a curious oberservation:
When pushing the menue button of "save" the button stays pushed after
the acutal saving process has ceased! (I am not quite sure if this is
really a bug, but hasn't oberserved before in fix3)
Secondly:
I wish to nest a items in a description enviroment which is splendidly
explained in the docs (!)
It should look like this:
1. description
# itemize
#item
#item
2. description
and so on
Unfortunately whenever I start to use the descritption enviroment,
counting starts with "1." again.
I would prefer a continious counter like description 1., 2., 3. and so
on...!
In case of staying unclear I have added an examplefile!
Does anybody know how to make this thing go?
I already had a look at Herberts Website and inserted
\renewcommand\labelenumi{\Alph{enumi}}
\renewcommand\labelenumii{\Alph{enumi}-\Alph{enumii}}
in latex preamble to change enumerationsstyle, without reaching
successful ends.although this is what I wanted on base of numbers
Greets
Thomas
#LyX 1.1 created this file. For more info see http://www.lyx.org/
\lyxformat 218
\textclass article
\language ngerman
\inputencoding auto
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 0
\use_amsmath 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 1
\paperpagestyle default
\layout Title
bla
\layout Author
Thomas
\layout Part
The way of nesting things in Lyx
\layout Enumerate
Description starts with 1.
\layout Itemize
Itemize
\begin_deeper
\layout Itemize
M a -> gave me this nest
\layout Itemize
same
\layout Itemize
always the same
\end_deeper
\layout Enumerate
Unfortunately description starts again 1.
:-( but should continue with 2.
and so on)
\the_end
[Fwd: 2 Questions]
Sorry it should have been said that it is rather enumerate than description, sorry for confusion Somy question relates to enumerationstyle!! Greets Thomas #LyX 1.1 created this file. For more info see http://www.lyx.org/ \lyxformat 218 \textclass article \language ngerman \inputencoding auto \fontscheme default \graphics default \paperfontsize default \spacing single \papersize Default \paperpackage a4 \use_geometry 0 \use_amsmath 0 \paperorientation portrait \secnumdepth 3 \tocdepth 3 \paragraph_separation indent \defskip medskip \quotes_language english \quotes_times 2 \papercolumns 1 \papersides 1 \paperpagestyle default \layout Title bla \layout Author Thomas \layout Part The way of nesting things in Lyx \layout Enumerate Description starts with 1. \layout Itemize Itemize \begin_deeper \layout Itemize M a -> gave me this nest \layout Itemize same \layout Itemize always the same \end_deeper \layout Enumerate Unfortunately description starts again 1. :-( but should continue with 2. and so on) \the_end
No flame
Hey, this is quite a bit OT. I regularily run into troubles using my Mailfilters (serveral for LyX and others) in Mozilla 0.9.6. This is because people adress their mailss primarily to people who started a thread and secondly to this user-list.(BTW these people receive this message twice!) Therefore I used to find a mess in my mailbox because mails of different sources are messed into one folder. Maybe I am not the only one who faces this problem? So I would like to see people to adress primarily to the user-list and if necessary at all secondly cc-ing to other LyXers. Please make up your mind and tell me what you are thinking about this Maybe there is a workaround and I am not aware of:-)) Any statements solely to my adress, don't flood this list, please! Thomas
