Re: Little Problem

[Dr Eberhard W Lisse]

???

-- 
Sent from Dr Lisse's iPad mini 4

> On 3 Sep 2017, at 12:16, John Kane  wrote:
> 
> Not strictly on topic did you want "
> Carlos Fernando Knauer - aluno externo do PPGFA UTFPR" formatted as Date? I 
> would have thought Author would be more appropriate.
> 
>> On 1 September 2017 at 05:35, Dr Eberhard Lisse  wrote:
>> Send a Minimal Working Example,
>> 
>> in other words, remove everything which does not produce the error
>> until you are left with what does.
>> 
>> Often that will make the error obvious :-)-O
>> 
>> el
>> 
>> On 31/08/2017 18:23, Carlos Knauer wrote:
>> > Good Afternon
>> >
>> > How can I erase númber 6 in front of mqtrix at page 9 ? I am sending
>> > the file.
>> >
>> > Thanks.
>> >
>> > Carlos F. Knauer - Brazil
>> >
>> 
>> 
> 
> 
> 
> -- 
> John Kane
> Kingston ON Canada

Re: Little Problem

[John Kane]

Not strictly on topic did you want "
Carlos Fernando Knauer - aluno externo do PPGFA UTFPR" formatted as Date? I
would have thought Author would be more appropriate.

On 1 September 2017 at 05:35, Dr Eberhard Lisse  wrote:

> Send a Minimal Working Example,
>
> in other words, remove everything which does not produce the error
> until you are left with what does.
>
> Often that will make the error obvious :-)-O
>
> el
>
> On 31/08/2017 18:23, Carlos Knauer wrote:
> > Good Afternon
> >
> > How can I erase númber 6 in front of mqtrix at page 9 ? I am sending
> > the file.
> >
> > Thanks.
> >
> > Carlos F. Knauer - Brazil
> >
>
>
>


-- 
John Kane
Kingston ON Canada

Re: Little Problem

[Dr Eberhard Lisse]

Send a Minimal Working Example,

in other words, remove everything which does not produce the error
until you are left with what does.

Often that will make the error obvious :-)-O

el

On 31/08/2017 18:23, Carlos Knauer wrote:
> Good Afternon
>
> How can I erase númber 6 in front of mqtrix at page 9 ? I am sending
> the file.
>
> Thanks.
>
> Carlos F. Knauer - Brazil
>

Re: Little Problem

[David L. Johnson]

On 08/31/2017 01:23 PM, Carlos Knauer wrote:

Good Afternon

How can I erase númber 6 in front of mqtrix at page 9 ? I am sending 
the file.


Thanks.

Carlos F. Knauer - Brazil

That number 6 is there because the environment for that matrix is 
"Section", which you don't want.  Make it "standard" and it will be fine.


--

David L. Johnson
Department of Mathematics
Lehigh University

Little Problem

[Carlos Knauer]

Good Afternon

How can I erase númber 6 in front of mqtrix at page 9 ? I am sending the
file.

Thanks.

Carlos F. Knauer - Brazil


Trabalho_de_Quantica01b.lyx
Description: application/lyx

1.6.0 rc1 little problem (inset ERT)

[Marcelo Acuña]

Hello,
 When I open an inset that contain an ERT is not show a handle (button) for 
close it. 
 I must make a left click and choose option close from menu instead more easy 
click over handle.
 All others inset work well.
 Regards.
Marcelo

Marcelo Acuña visitá mi sitio web http://www.aleph-uno.com.ar 
==


  

¡Buscá desde tu celular!

Yahoo! oneSEARCH ahora está en Claro

http://ar.mobile.yahoo.com/onesearch

Re: 1.6.0 rc1 little problem (inset ERT)

[rgheck]

Marcelo Acuña wrote:

Hello,
 When I open an inset that contain an ERT is not show a handle (button) for close it. 
 I must make a left click and choose option close from menu instead more easy click over handle.

 All others inset work well.

  
That was an intentional design decision. But this is all configurable in 
1.6. Copy the file stdinsets.inc to your local user directory, and look 
for InsetLayout ERT. If you change the line that says Decoration 
minimalistic to Decoration classic, you'll get the old look back. You 
could also do this with a module. In fact, the Minimalistic module (see 
DocumentSettingsDocument ClassModules) does nothing but redefine the 
look of some insets.


You can also use Ctrl-I to close it, by the way. Faster than using the 
mouse.


rh

Re: 1.6.0 rc1 little problem (inset ERT)

[Marcelo Acuña]

  Hello,
   When I open an inset that contain an ERT is not show
 a handle (button) for close it. 
   I must make a left click and choose option close from
 menu instead more easy click over handle.
   All others inset work well.
 

 That was an intentional design decision. But this is all
 configurable in 
 1.6. Copy the file stdinsets.inc to your local user
 directory, and look 
 for InsetLayout ERT. If you change the line
 that says Decoration 
 minimalistic to Decoration classic,
 you'll get the old look back. You 
 could also do this with a module. In fact, the Minimalistic
 module (see 
 DocumentSettingsDocument ClassModules) does
 nothing but redefine the 
 look of some insets.
 
 You can also use Ctrl-I to close it, by the way. Faster
 than using the 
 mouse.
 
 rh

 Ok. Thanks!
 Marcelo


  

¡Buscá desde tu celular!

Yahoo! oneSEARCH ahora está en Claro

http://ar.mobile.yahoo.com/onesearch

1.6.0 rc1 little problem (inset ERT)

[Marcelo Acuña]

Hello,
 When I open an inset that contain an ERT is not show a handle (button) for 
close it. 
 I must make a left click and choose option close from menu instead more easy 
click over handle.
 All others inset work well.
 Regards.
Marcelo

Marcelo Acuña visitá mi sitio web http://www.aleph-uno.com.ar 
==


  

¡Buscá desde tu celular!

Yahoo! oneSEARCH ahora está en Claro

http://ar.mobile.yahoo.com/onesearch

Re: 1.6.0 rc1 little problem (inset ERT)

[rgheck]

Marcelo Acuña wrote:

Hello,
 When I open an inset that contain an ERT is not show a handle (button) for close it. 
 I must make a left click and choose option close from menu instead more easy click over handle.

 All others inset work well.

  
That was an intentional design decision. But this is all configurable in 
1.6. Copy the file stdinsets.inc to your local user directory, and look 
for InsetLayout ERT. If you change the line that says Decoration 
minimalistic to Decoration classic, you'll get the old look back. You 
could also do this with a module. In fact, the Minimalistic module (see 
DocumentSettingsDocument ClassModules) does nothing but redefine the 
look of some insets.


You can also use Ctrl-I to close it, by the way. Faster than using the 
mouse.


rh

Re: 1.6.0 rc1 little problem (inset ERT)

[Marcelo Acuña]

  Hello,
   When I open an inset that contain an ERT is not show
 a handle (button) for close it. 
   I must make a left click and choose option close from
 menu instead more easy click over handle.
   All others inset work well.
 

 That was an intentional design decision. But this is all
 configurable in 
 1.6. Copy the file stdinsets.inc to your local user
 directory, and look 
 for InsetLayout ERT. If you change the line
 that says Decoration 
 minimalistic to Decoration classic,
 you'll get the old look back. You 
 could also do this with a module. In fact, the Minimalistic
 module (see 
 DocumentSettingsDocument ClassModules) does
 nothing but redefine the 
 look of some insets.
 
 You can also use Ctrl-I to close it, by the way. Faster
 than using the 
 mouse.
 
 rh

 Ok. Thanks!
 Marcelo


  

¡Buscá desde tu celular!

Yahoo! oneSEARCH ahora está en Claro

http://ar.mobile.yahoo.com/onesearch

1.6.0 rc1 little problem (inset ERT)

[Marcelo Acuña]

Hello,
 When I open an inset that contain an ERT is not show a handle (button) for 
close it. 
 I must make a left click and choose option close from menu instead more easy 
click over handle.
 All others inset work well.
 Regards.
Marcelo

Marcelo Acuña visitá mi sitio web http://www.aleph-uno.com.ar 
==


  

¡Buscá desde tu celular!

Yahoo! oneSEARCH ahora está en Claro

http://ar.mobile.yahoo.com/onesearch

Re: 1.6.0 rc1 little problem (inset ERT)

[rgheck]

Marcelo Acuña wrote:

Hello,
 When I open an inset that contain an ERT is not show a handle (button) for close it. 
 I must make a left click and choose option close from menu instead more easy click over handle.

 All others inset work well.

  
That was an intentional design decision. But this is all configurable in 
1.6. Copy the file stdinsets.inc to your local user directory, and look 
for "InsetLayout ERT". If you change the line that says "Decoration 
minimalistic" to "Decoration classic", you'll get the old look back. You 
could also do this with a module. In fact, the Minimalistic module (see 
Document>Settings>Document Class>Modules) does nothing but redefine the 
look of some insets.


You can also use Ctrl-I to close it, by the way. Faster than using the 
mouse.


rh

Re: 1.6.0 rc1 little problem (inset ERT)

[Marcelo Acuña]

> > Hello,
> >  When I open an inset that contain an ERT is not show
> a handle (button) for close it. 
> >  I must make a left click and choose option close from
> menu instead more easy click over handle.
> >  All others inset work well.
> >
> >   
> That was an intentional design decision. But this is all
> configurable in 
> 1.6. Copy the file stdinsets.inc to your local user
> directory, and look 
> for "InsetLayout ERT". If you change the line
> that says "Decoration 
> minimalistic" to "Decoration classic",
> you'll get the old look back. You 
> could also do this with a module. In fact, the Minimalistic
> module (see 
> Document>Settings>Document Class>Modules) does
> nothing but redefine the 
> look of some insets.
> 
> You can also use Ctrl-I to close it, by the way. Faster
> than using the 
> mouse.
> 
> rh

 Ok. Thanks!
 Marcelo


  

¡Buscá desde tu celular!

Yahoo! oneSEARCH ahora está en Claro

http://ar.mobile.yahoo.com/onesearch

Re: little problem in lyx 1.5.0

[Marcelo Acuña]

--- Richard Heck [EMAIL PROTECTED] escribió:

 
 If you are seeing only one paragraph, then this is a
 known problem.
 
 Marcelo Acuña wrote:
  Hello,
   I have a little problem in lyx 1.5.0.
   In times main screen of lyx is no redraw properly
  when I changed to others program, i.e.: when I run
  latex.
 

 Yes, when I return to main screen of lyx only one
paragraph is show.
 Marcelo



  __ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: little problem in lyx 1.5.0

[Richard Heck]

If you can figure out exactly when this happens, then we'll have a
chance to debug it. I see this problem, too, but it's so intermittent,
there's no way to get at it.

rh

Marcelo Acuña wrote:
 --- Richard Heck [EMAIL PROTECTED] escribió:

   
 If you are seeing only one paragraph, then this is a
 known problem.

 Marcelo Acuña wrote:
 
 Hello,
  I have a little problem in lyx 1.5.0.
  In times main screen of lyx is no redraw properly
 when I changed to others program, i.e.: when I run
 latex.

   

  Yes, when I return to main screen of lyx only one
 paragraph is show.
  Marcelo



   __ 
 Preguntá. Respondé. Descubrí. 
 Todo lo que querías saber, y lo que ni imaginabas,
 está en Yahoo! Respuestas (Beta). 
 ¡Probalo ya! 
 http://www.yahoo.com.ar/respuestas 
   


-- 
==
Richard G Heck, Jr
Professor of Philosophy
Brown University
http://frege.brown.edu/heck/
==
Get my public key from http://sks.keyserver.penguin.de
Hash: 0x1DE91F1E66FFBDEC
Learn how to sign your email using Thunderbird and GnuPG at:
http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto

Re: little problem in lyx 1.5.0

[Marcelo Acuña]

--- Richard Heck [EMAIL PROTECTED] escribió:

 
 If you are seeing only one paragraph, then this is a
 known problem.
 
 Marcelo Acuña wrote:
  Hello,
   I have a little problem in lyx 1.5.0.
   In times main screen of lyx is no redraw properly
  when I changed to others program, i.e.: when I run
  latex.
 

 Yes, when I return to main screen of lyx only one
paragraph is show.
 Marcelo



  __ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: little problem in lyx 1.5.0

[Richard Heck]

If you can figure out exactly when this happens, then we'll have a
chance to debug it. I see this problem, too, but it's so intermittent,
there's no way to get at it.

rh

Marcelo Acuña wrote:
 --- Richard Heck [EMAIL PROTECTED] escribió:

   
 If you are seeing only one paragraph, then this is a
 known problem.

 Marcelo Acuña wrote:
 
 Hello,
  I have a little problem in lyx 1.5.0.
  In times main screen of lyx is no redraw properly
 when I changed to others program, i.e.: when I run
 latex.

   

  Yes, when I return to main screen of lyx only one
 paragraph is show.
  Marcelo



   __ 
 Preguntá. Respondé. Descubrí. 
 Todo lo que querías saber, y lo que ni imaginabas,
 está en Yahoo! Respuestas (Beta). 
 ¡Probalo ya! 
 http://www.yahoo.com.ar/respuestas 
   


-- 
==
Richard G Heck, Jr
Professor of Philosophy
Brown University
http://frege.brown.edu/heck/
==
Get my public key from http://sks.keyserver.penguin.de
Hash: 0x1DE91F1E66FFBDEC
Learn how to sign your email using Thunderbird and GnuPG at:
http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto

Re: little problem in lyx 1.5.0

[Marcelo Acuña]

--- Richard Heck <[EMAIL PROTECTED]> escribió:

> 
> If you are seeing only one paragraph, then this is a
> known problem.
> 
> Marcelo Acuña wrote:
> > Hello,
> >  I have a little problem in lyx 1.5.0.
> >  In times main screen of lyx is no redraw properly
> > when I changed to others program, i.e.: when I run
> > latex.
> >

 Yes, when I return to main screen of lyx only one
paragraph is show.
 Marcelo



  __ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: little problem in lyx 1.5.0

[Richard Heck]

If you can figure out exactly when this happens, then we'll have a
chance to debug it. I see this problem, too, but it's so intermittent,
there's no way to get at it.

rh

Marcelo Acuña wrote:
> --- Richard Heck <[EMAIL PROTECTED]> escribió:
>
>   
>> If you are seeing only one paragraph, then this is a
>> known problem.
>>
>> Marcelo Acuña wrote:
>> 
>>> Hello,
>>>  I have a little problem in lyx 1.5.0.
>>>  In times main screen of lyx is no redraw properly
>>> when I changed to others program, i.e.: when I run
>>> latex.
>>>
>>>   
>
>  Yes, when I return to main screen of lyx only one
> paragraph is show.
>  Marcelo
>
>
>
>   __ 
> Preguntá. Respondé. Descubrí. 
> Todo lo que querías saber, y lo que ni imaginabas,
> está en Yahoo! Respuestas (Beta). 
> ¡Probalo ya! 
> http://www.yahoo.com.ar/respuestas 
>   


-- 
==
Richard G Heck, Jr
Professor of Philosophy
Brown University
http://frege.brown.edu/heck/
==
Get my public key from http://sks.keyserver.penguin.de
Hash: 0x1DE91F1E66FFBDEC
Learn how to sign your email using Thunderbird and GnuPG at:
http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto

little problem in lyx 1.5.0

[Marcelo Acuña]

Hello,
 I have a little problem in lyx 1.5.0.
 In times main screen of lyx is no redraw properly
when I changed to others program, i.e.: when I run
latex.

 Marcelo



  __ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: little problem in lyx 1.5.0

[Richard Heck]

If you are seeing only one paragraph, then this is a known problem.

Marcelo Acuña wrote:
 Hello,
  I have a little problem in lyx 1.5.0.
  In times main screen of lyx is no redraw properly
 when I changed to others program, i.e.: when I run
 latex.

  Marcelo



   __ 
 Preguntá. Respondé. Descubrí. 
 Todo lo que querías saber, y lo que ni imaginabas,
 está en Yahoo! Respuestas (Beta). 
 ¡Probalo ya! 
 http://www.yahoo.com.ar/respuestas 

   


-- 
==
Richard G Heck, Jr
Professor of Philosophy
Brown University
http://frege.brown.edu/heck/
==
Get my public key from http://sks.keyserver.penguin.de
Hash: 0x1DE91F1E66FFBDEC
Learn how to sign your email using Thunderbird and GnuPG at:
http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto

little problem in lyx 1.5.0

[Marcelo Acuña]

Hello,
 I have a little problem in lyx 1.5.0.
 In times main screen of lyx is no redraw properly
when I changed to others program, i.e.: when I run
latex.

 Marcelo



  __ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: little problem in lyx 1.5.0

[Richard Heck]

If you are seeing only one paragraph, then this is a known problem.

Marcelo Acuña wrote:
 Hello,
  I have a little problem in lyx 1.5.0.
  In times main screen of lyx is no redraw properly
 when I changed to others program, i.e.: when I run
 latex.

  Marcelo



   __ 
 Preguntá. Respondé. Descubrí. 
 Todo lo que querías saber, y lo que ni imaginabas,
 está en Yahoo! Respuestas (Beta). 
 ¡Probalo ya! 
 http://www.yahoo.com.ar/respuestas 

   


-- 
==
Richard G Heck, Jr
Professor of Philosophy
Brown University
http://frege.brown.edu/heck/
==
Get my public key from http://sks.keyserver.penguin.de
Hash: 0x1DE91F1E66FFBDEC
Learn how to sign your email using Thunderbird and GnuPG at:
http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto

little problem in lyx 1.5.0

[Marcelo Acuña]

Hello,
 I have a little problem in lyx 1.5.0.
 In times main screen of lyx is no redraw properly
when I changed to others program, i.e.: when I run
latex.

 Marcelo



  __ 
Preguntá. Respondé. Descubrí. 
Todo lo que querías saber, y lo que ni imaginabas,
está en Yahoo! Respuestas (Beta). 
¡Probalo ya! 
http://www.yahoo.com.ar/respuestas 

Re: little problem in lyx 1.5.0

[Richard Heck]

If you are seeing only one paragraph, then this is a known problem.

Marcelo Acuña wrote:
> Hello,
>  I have a little problem in lyx 1.5.0.
>  In times main screen of lyx is no redraw properly
> when I changed to others program, i.e.: when I run
> latex.
>
>  Marcelo
>
>
>
>   __ 
> Preguntá. Respondé. Descubrí. 
> Todo lo que querías saber, y lo que ni imaginabas,
> está en Yahoo! Respuestas (Beta). 
> ¡Probalo ya! 
> http://www.yahoo.com.ar/respuestas 
>
>   


-- 
==
Richard G Heck, Jr
Professor of Philosophy
Brown University
http://frege.brown.edu/heck/
==
Get my public key from http://sks.keyserver.penguin.de
Hash: 0x1DE91F1E66FFBDEC
Learn how to sign your email using Thunderbird and GnuPG at:
http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto

Re: little problem with 1.4.0pre5

[Helge Hafting]

Marcelo Acuña wrote:


Hello,
When I open a footnote and I want mark the entire
text I have a problem.
I put the cursor at the start of footnote text, then
press shift key and down arrow key, then with right
arrow key I mark until final point of footnote.
All OK.
But if I press a key one more time, for error, marked
zone continue from top of footnote box and I lost
control on marked zone.
I need cancel mark and make all again from start.
Regards.
Marcelo


Lyx 1.4 does not support selections that spans
half a footnote and something outside it as well.

So whenever you select through the boundary
of a footnote, you end up selecting the entire
footnote inset.  The same goes for all other insets,
such as tables and boxes.

This makes sense, for if you were able to make such
a selection, what would happen to cut/copy+paste?

Clearly, a cut should not remove the footnote itself
if only some of the contents is removed.  But how about
pasting then?  Should that create a new footnote? Or
should you only be able to paste such a cut into another
footnote?

Helge Hafting

Re: little problem with 1.4.0pre5

[Mael Hilléreau]

Lyx 1.4 does not support selections that spans
half a footnote and something outside it as well.

So whenever you select through the boundary
of a footnote, you end up selecting the entire
footnote inset.  The same goes for all other insets,
such as tables and boxes.

This makes sense, for if you were able to make such
a selection, what would happen to cut/copy+paste?



Why not disabling selection out of the inset boundary then?

I think that the current behavior is quite confusing and counter 
productive : in the case of a big inset, if you unfortunately go through 
the inset boundary, you have to restart the operation, putting again the 
cursor at the beginning of the inset. Whereas if a selection beginning 
within an inset couldn't end out of this inset, the problem wouldn't arise.


Regards,
Mael.

--
Mael Hilléreau

Re: little problem with 1.4.0pre5

[Jean-Marc Lasgouttes]

 Helge == Helge Hafting [EMAIL PROTECTED] writes:

Helge Marcelo Acuña wrote:
 Hello, When I open a footnote and I want mark the entire text I
 have a problem. I put the cursor at the start of footnote text,
 then press shift key and down arrow key, then with right arrow key
 I mark until final point of footnote. All OK. But if I press a key
 one more time, for error, marked zone continue from top of footnote
 box and I lost control on marked zone. I need cancel mark and make
 all again from start. Regards. Marcelo
 
Helge Lyx 1.4 does not support selections that spans half a footnote
Helge and something outside it as well.

While this is true, it should be possible to Shift-LeftArrow and have
the cursor go back into the footnote inset. The fact that it is not
possible is a (minor) bug IMO. Marcelo, could you add it to bugzilla?

Re: little problem with 1.4.0pre5

[Jean-Marc Lasgouttes]

 Mael == Mael Hilléreau [EMAIL PROTECTED] writes:

 Lyx 1.4 does not support selections that spans half a footnote and
 something outside it as well. So whenever you select through the
 boundary of a footnote, you end up selecting the entire footnote
 inset. The same goes for all other insets, such as tables and
 boxes. This makes sense, for if you were able to make such a
 selection, what would happen to cut/copy+paste?
 

Mael Why not disabling selection out of the inset boundary then?

This is what 1.3.x did. I think being able to extend outside of the
inset is good, as long as it is possible to go back.

JMarc

Re: little problem with 1.4.0pre5

[Marcelo Acuña]

  Hello, When I open a footnote and I want mark the
 entire text I
  have a problem. I put the cursor at the start of
 footnote text,
  then press shift key and down arrow key, then
 with right arrow key
  I mark until final point of footnote. All OK. But
 if I press a key
  one more time, for error, marked zone continue
 from top of footnote
  box and I lost control on marked zone. I need
 cancel mark and make
  all again from start. Regards. Marcelo
  
 Helge Lyx 1.4 does not support selections that
 spans half a footnote
 Helge and something outside it as well.
 
 While this is true, it should be possible to
 Shift-LeftArrow and have
 the cursor go back into the footnote inset. The fact
 that it is not
 possible is a (minor) bug IMO. Marcelo, could you
 add it to bugzilla?
 
Ok Jean-Marc, but my english is very very bad :-(
Marcelo





___ 
1GB gratis, Antivirus y Antispam 
Correo Yahoo!, el mejor correo web del mundo 
http://correo.yahoo.com.ar 

Re: little problem with 1.4.0pre5

[Helge Hafting]

Marcelo Acuña wrote:


Hello,
When I open a footnote and I want mark the entire
text I have a problem.
I put the cursor at the start of footnote text, then
press shift key and down arrow key, then with right
arrow key I mark until final point of footnote.
All OK.
But if I press a key one more time, for error, marked
zone continue from top of footnote box and I lost
control on marked zone.
I need cancel mark and make all again from start.
Regards.
Marcelo


Lyx 1.4 does not support selections that spans
half a footnote and something outside it as well.

So whenever you select through the boundary
of a footnote, you end up selecting the entire
footnote inset.  The same goes for all other insets,
such as tables and boxes.

This makes sense, for if you were able to make such
a selection, what would happen to cut/copy+paste?

Clearly, a cut should not remove the footnote itself
if only some of the contents is removed.  But how about
pasting then?  Should that create a new footnote? Or
should you only be able to paste such a cut into another
footnote?

Helge Hafting

Re: little problem with 1.4.0pre5

[Mael Hilléreau]

Lyx 1.4 does not support selections that spans
half a footnote and something outside it as well.

So whenever you select through the boundary
of a footnote, you end up selecting the entire
footnote inset.  The same goes for all other insets,
such as tables and boxes.

This makes sense, for if you were able to make such
a selection, what would happen to cut/copy+paste?



Why not disabling selection out of the inset boundary then?

I think that the current behavior is quite confusing and counter 
productive : in the case of a big inset, if you unfortunately go through 
the inset boundary, you have to restart the operation, putting again the 
cursor at the beginning of the inset. Whereas if a selection beginning 
within an inset couldn't end out of this inset, the problem wouldn't arise.


Regards,
Mael.

--
Mael Hilléreau

Re: little problem with 1.4.0pre5

[Jean-Marc Lasgouttes]

 Helge == Helge Hafting [EMAIL PROTECTED] writes:

Helge Marcelo Acuña wrote:
 Hello, When I open a footnote and I want mark the entire text I
 have a problem. I put the cursor at the start of footnote text,
 then press shift key and down arrow key, then with right arrow key
 I mark until final point of footnote. All OK. But if I press a key
 one more time, for error, marked zone continue from top of footnote
 box and I lost control on marked zone. I need cancel mark and make
 all again from start. Regards. Marcelo
 
Helge Lyx 1.4 does not support selections that spans half a footnote
Helge and something outside it as well.

While this is true, it should be possible to Shift-LeftArrow and have
the cursor go back into the footnote inset. The fact that it is not
possible is a (minor) bug IMO. Marcelo, could you add it to bugzilla?

Re: little problem with 1.4.0pre5

[Jean-Marc Lasgouttes]

 Mael == Mael Hilléreau [EMAIL PROTECTED] writes:

 Lyx 1.4 does not support selections that spans half a footnote and
 something outside it as well. So whenever you select through the
 boundary of a footnote, you end up selecting the entire footnote
 inset. The same goes for all other insets, such as tables and
 boxes. This makes sense, for if you were able to make such a
 selection, what would happen to cut/copy+paste?
 

Mael Why not disabling selection out of the inset boundary then?

This is what 1.3.x did. I think being able to extend outside of the
inset is good, as long as it is possible to go back.

JMarc

Re: little problem with 1.4.0pre5

[Marcelo Acuña]

  Hello, When I open a footnote and I want mark the
 entire text I
  have a problem. I put the cursor at the start of
 footnote text,
  then press shift key and down arrow key, then
 with right arrow key
  I mark until final point of footnote. All OK. But
 if I press a key
  one more time, for error, marked zone continue
 from top of footnote
  box and I lost control on marked zone. I need
 cancel mark and make
  all again from start. Regards. Marcelo
  
 Helge Lyx 1.4 does not support selections that
 spans half a footnote
 Helge and something outside it as well.
 
 While this is true, it should be possible to
 Shift-LeftArrow and have
 the cursor go back into the footnote inset. The fact
 that it is not
 possible is a (minor) bug IMO. Marcelo, could you
 add it to bugzilla?
 
Ok Jean-Marc, but my english is very very bad :-(
Marcelo





___ 
1GB gratis, Antivirus y Antispam 
Correo Yahoo!, el mejor correo web del mundo 
http://correo.yahoo.com.ar 

Re: little problem with 1.4.0pre5

[Helge Hafting]

Marcelo Acuña wrote:


Hello,
When I open a footnote and I want mark the entire
text I have a problem.
I put the cursor at the start of footnote text, then
press shift key and down arrow key, then with right
arrow key I mark until final point of footnote.
All OK.
But if I press a key one more time, for error, marked
zone continue from top of footnote box and I lost
control on marked zone.
I need cancel mark and make all again from start.
Regards.
Marcelo


Lyx 1.4 does not support selections that spans
"half a footnote and something outside it as well".

So whenever you select through the boundary
of a footnote, you end up selecting the entire
footnote inset.  The same goes for all other insets,
such as tables and boxes.

This makes sense, for if you were able to make such
a selection, what would happen to cut/copy+paste?

Clearly, a cut should not remove the footnote itself
if only some of the contents is removed.  But how about
pasting then?  Should that create a new footnote? Or
should you only be able to paste such a cut into another
footnote?

Helge Hafting

Re: little problem with 1.4.0pre5

[Mael Hilléreau]

Lyx 1.4 does not support selections that spans
"half a footnote and something outside it as well".

So whenever you select through the boundary
of a footnote, you end up selecting the entire
footnote inset.  The same goes for all other insets,
such as tables and boxes.

This makes sense, for if you were able to make such
a selection, what would happen to cut/copy+paste?



Why not disabling selection out of the inset boundary then?

I think that the current behavior is quite confusing and counter 
productive : in the case of a big inset, if you unfortunately go through 
the inset boundary, you have to restart the operation, putting again the 
cursor at the beginning of the inset. Whereas if a selection beginning 
within an inset couldn't end out of this inset, the problem wouldn't arise.


Regards,
Mael.

--
Mael Hilléreau

Re: little problem with 1.4.0pre5

[Jean-Marc Lasgouttes]

> "Helge" == Helge Hafting <[EMAIL PROTECTED]> writes:

Helge> Marcelo Acuña wrote:
>> Hello, When I open a footnote and I want mark the entire text I
>> have a problem. I put the cursor at the start of footnote text,
>> then press shift key and down arrow key, then with right arrow key
>> I mark until final point of footnote. All OK. But if I press a key
>> one more time, for error, marked zone continue from top of footnote
>> box and I lost control on marked zone. I need cancel mark and make
>> all again from start. Regards. Marcelo
>> 
Helge> Lyx 1.4 does not support selections that spans "half a footnote
Helge> and something outside it as well".

While this is true, it should be possible to Shift-LeftArrow and have
the cursor go back into the footnote inset. The fact that it is not
possible is a (minor) bug IMO. Marcelo, could you add it to bugzilla?

Re: little problem with 1.4.0pre5

[Jean-Marc Lasgouttes]

> "Mael" == Mael Hilléreau <[EMAIL PROTECTED]> writes:

>> Lyx 1.4 does not support selections that spans "half a footnote and
>> something outside it as well". So whenever you select through the
>> boundary of a footnote, you end up selecting the entire footnote
>> inset. The same goes for all other insets, such as tables and
>> boxes. This makes sense, for if you were able to make such a
>> selection, what would happen to cut/copy+paste?
>> 

Mael> Why not disabling selection out of the inset boundary then?

This is what 1.3.x did. I think being able to extend outside of the
inset is good, as long as it is possible to go back.

JMarc

Re: little problem with 1.4.0pre5

[Marcelo Acuña]

> >> Hello, When I open a footnote and I want mark the
> entire text I
> >> have a problem. I put the cursor at the start of
> footnote text,
> >> then press shift key and down arrow key, then
> with right arrow key
> >> I mark until final point of footnote. All OK. But
> if I press a key
> >> one more time, for error, marked zone continue
> from top of footnote
> >> box and I lost control on marked zone. I need
> cancel mark and make
> >> all again from start. Regards. Marcelo
> >> 
> Helge> Lyx 1.4 does not support selections that
> spans "half a footnote
> Helge> and something outside it as well".
> 
> While this is true, it should be possible to
> Shift-LeftArrow and have
> the cursor go back into the footnote inset. The fact
> that it is not
> possible is a (minor) bug IMO. Marcelo, could you
> add it to bugzilla?
> 
Ok Jean-Marc, but my english is very very bad :-(
Marcelo





___ 
1GB gratis, Antivirus y Antispam 
Correo Yahoo!, el mejor correo web del mundo 
http://correo.yahoo.com.ar 

little problem with 1.4.0pre5

[Marcelo Acuña]

Hello,
When I open a footnote and I want mark the entire
text I have a problem.
I put the cursor at the start of footnote text, then
press shift key and down arrow key, then with right
arrow key I mark until final point of footnote.
All OK.
But if I press a key one more time, for error, marked
zone continue from top of footnote box and I lost
control on marked zone.
I need cancel mark and make all again from start.
Regards.
Marcelo






___ 
1GB gratis, Antivirus y Antispam 
Correo Yahoo!, el mejor correo web del mundo 
http://correo.yahoo.com.ar 

little problem with 1.4.0pre5

[Marcelo Acuña]

Hello,
When I open a footnote and I want mark the entire
text I have a problem.
I put the cursor at the start of footnote text, then
press shift key and down arrow key, then with right
arrow key I mark until final point of footnote.
All OK.
But if I press a key one more time, for error, marked
zone continue from top of footnote box and I lost
control on marked zone.
I need cancel mark and make all again from start.
Regards.
Marcelo






___ 
1GB gratis, Antivirus y Antispam 
Correo Yahoo!, el mejor correo web del mundo 
http://correo.yahoo.com.ar 

little problem with 1.4.0pre5

[Marcelo Acuña]

Hello,
When I open a footnote and I want mark the entire
text I have a problem.
I put the cursor at the start of footnote text, then
press shift key and down arrow key, then with right
arrow key I mark until final point of footnote.
All OK.
But if I press a key one more time, for error, marked
zone continue from top of footnote box and I lost
control on marked zone.
I need cancel mark and make all again from start.
Regards.
Marcelo






___ 
1GB gratis, Antivirus y Antispam 
Correo Yahoo!, el mejor correo web del mundo 
http://correo.yahoo.com.ar 

little problem with frontmater and index entry

[Marcelo Acuÿfffff1a]

Hello,
  In koma-script book, I have frontmater, (abstract, prologue, etc.)
  Names in this part not appears in alphabetical index.
  How I can solve this?
  Thanks
  Marcelo
   


-
 1GB gratis, Antivirus y Antispam
 Correo Yahoo!, el mejor correo web del mundo
 Abrí tu cuenta aquí

Re: little problem with frontmater and index entry

[Kevin Pfeiffer]

Marcelo writes:
 Hello,
   In koma-script book, I have frontmater, (abstract, prologue, etc.)
   Names in this part not appears in alphabetical index.
   How I can solve this?
   Thanks

Where did you place the abstract? I only see this in koma-script 
_article_ (which is where I would expect it) and there Pfeiffer, 
Kevin indexed just fine.

I don't know if it will help in this case, but Koma has extensive, if a 
bit woody  documentation (in English and German).

-Kevin


-- 
Kevin Pfeiffer [EMAIL PROTECTED]
Tiros-Translations

Re: little problem with frontmater and index entry

[Marcelo Acuÿfffff1a]

 In koma-script book, I have frontmater, (abstract, prologue, etc.)
 Names in this part not appears in alphabetical index.
 How I can solve this?

Where did you place the abstract? I only see this in koma-script 
_article_ (which is where I would expect it) and there Pfeiffer, 
Kevin indexed just fine.

I don't know if it will help in this case, but Koma has extensive, if a 
bit woody documentation (in English and German).

-Kevin

  In my book Abstract is a title of first chapter*, not the article 
  feature. In documentation I can find a solution to my problem.
  Thanks.
  Marcelo
  

-- 
Kevin Pfeiffer 

Tiros-Translations





-
 1GB gratis, Antivirus y Antispam
 Correo Yahoo!, el mejor correo web del mundo
 Abrí tu cuenta aquí

little problem with frontmater and index entry

[Marcelo Acuÿfffff1a]

Hello,
  In koma-script book, I have frontmater, (abstract, prologue, etc.)
  Names in this part not appears in alphabetical index.
  How I can solve this?
  Thanks
  Marcelo
   


-
 1GB gratis, Antivirus y Antispam
 Correo Yahoo!, el mejor correo web del mundo
 Abrí tu cuenta aquí

Re: little problem with frontmater and index entry

[Kevin Pfeiffer]

Marcelo writes:
 Hello,
   In koma-script book, I have frontmater, (abstract, prologue, etc.)
   Names in this part not appears in alphabetical index.
   How I can solve this?
   Thanks

Where did you place the abstract? I only see this in koma-script 
_article_ (which is where I would expect it) and there Pfeiffer, 
Kevin indexed just fine.

I don't know if it will help in this case, but Koma has extensive, if a 
bit woody  documentation (in English and German).

-Kevin


-- 
Kevin Pfeiffer [EMAIL PROTECTED]
Tiros-Translations

Re: little problem with frontmater and index entry

[Marcelo Acuÿfffff1a]

 In koma-script book, I have frontmater, (abstract, prologue, etc.)
 Names in this part not appears in alphabetical index.
 How I can solve this?

Where did you place the abstract? I only see this in koma-script 
_article_ (which is where I would expect it) and there Pfeiffer, 
Kevin indexed just fine.

I don't know if it will help in this case, but Koma has extensive, if a 
bit woody documentation (in English and German).

-Kevin

  In my book Abstract is a title of first chapter*, not the article 
  feature. In documentation I can find a solution to my problem.
  Thanks.
  Marcelo
  

-- 
Kevin Pfeiffer 

Tiros-Translations





-
 1GB gratis, Antivirus y Antispam
 Correo Yahoo!, el mejor correo web del mundo
 Abrí tu cuenta aquí

little problem with frontmater and index entry

[Marcelo Acuÿfffff1a]

Hello,
  In koma-script book, I have frontmater, (abstract, prologue, etc.)
  Names in this part not appears in alphabetical index.
  How I can solve this?
  Thanks
  Marcelo
   


-
 1GB gratis, Antivirus y Antispam
 Correo Yahoo!, el mejor correo web del mundo
 Abrí tu cuenta aquí

Re: little problem with frontmater and index entry

[Kevin Pfeiffer]

Marcelo writes:
> Hello,
>   In koma-script book, I have frontmater, (abstract, prologue, etc.)
>   Names in this part not appears in alphabetical index.
>   How I can solve this?
>   Thanks

Where did you place the abstract? I only see this in koma-script 
_article_ (which is where I would expect it) and there "Pfeiffer, 
Kevin" indexed just fine.

I don't know if it will help in this case, but Koma has extensive, if a 
bit "woody"  documentation (in English and German).

-Kevin


-- 
Kevin Pfeiffer <[EMAIL PROTECTED]>
Tiros-Translations

Re: little problem with frontmater and index entry

[Marcelo Acuÿfffff1a]

>> In koma-script book, I have frontmater, (abstract, prologue, etc.)
>> Names in this part not appears in alphabetical index.
>> How I can solve this?
>>
>Where did you place the abstract? I only see this in koma-script 
>_article_ (which is where I would expect it) and there "Pfeiffer, 
>Kevin" indexed just fine.
>
>I don't know if it will help in this case, but Koma has extensive, if a 
>bit "woody" documentation (in English and German).
>
>-Kevin

  In my book Abstract is a title of first chapter*, not the article 
  feature. In documentation I can find a solution to my problem.
  Thanks.
  Marcelo
  

-- 
Kevin Pfeiffer 

Tiros-Translations





-
 1GB gratis, Antivirus y Antispam
 Correo Yahoo!, el mejor correo web del mundo
 Abrí tu cuenta aquí

Re: An interesting little problem.

[Georg Baum]

Bo Peng wrote:

 Dear list,
 
 To track the changes of a lyx file, I insert $Rev$ in the text. After
 first 'svn ci', $Rev$ is replaced by $Rev: 40 $. However, when I open
 and save this file, $Rev: 40 $ is replaced by $Rev:40$  (blank spaces
 are removed) which can no longer be recognized by subversion.
 
 Anyone know a quick solution?

I put revision numbers in the preamble, where they are preserved.


Georg

Re: An interesting little problem.

[Georg Baum]

Bo Peng wrote:

 Dear list,
 
 To track the changes of a lyx file, I insert $Rev$ in the text. After
 first 'svn ci', $Rev$ is replaced by $Rev: 40 $. However, when I open
 and save this file, $Rev: 40 $ is replaced by $Rev:40$  (blank spaces
 are removed) which can no longer be recognized by subversion.
 
 Anyone know a quick solution?

I put revision numbers in the preamble, where they are preserved.


Georg

Re: An interesting little problem.

[Georg Baum]

Bo Peng wrote:

> Dear list,
> 
> To track the changes of a lyx file, I insert $Rev$ in the text. After
> first 'svn ci', $Rev$ is replaced by $Rev: 40 $. However, when I open
> and save this file, $Rev: 40 $ is replaced by $Rev:40$  (blank spaces
> are removed) which can no longer be recognized by subversion.
> 
> Anyone know a quick solution?

I put revision numbers in the preamble, where they are preserved.


Georg

An interesting little problem.

[Bo Peng]

Dear list,

To track the changes of a lyx file, I insert $Rev$ in the text. After
first 'svn ci', $Rev$ is replaced by $Rev: 40 $. However, when I open
and save this file, $Rev: 40 $ is replaced by $Rev:40$  (blank spaces
are removed) which can no longer be recognized by subversion.

Anyone know a quick solution?

Bo.

An interesting little problem.

[Bo Peng]

Dear list,

To track the changes of a lyx file, I insert $Rev$ in the text. After
first 'svn ci', $Rev$ is replaced by $Rev: 40 $. However, when I open
and save this file, $Rev: 40 $ is replaced by $Rev:40$  (blank spaces
are removed) which can no longer be recognized by subversion.

Anyone know a quick solution?

Bo.

An interesting little problem.

[Bo Peng]

Dear list,

To track the changes of a lyx file, I insert $Rev$ in the text. After
first 'svn ci', $Rev$ is replaced by $Rev: 40 $. However, when I open
and save this file, $Rev: 40 $ is replaced by $Rev:40$  (blank spaces
are removed) which can no longer be recognized by subversion.

Anyone know a quick solution?

Bo.

Re: A little problem with listings

[German Poo Caaman~o]

Herbert Voss wrote:
 does your first document class have chapters? if not, you have
 to change \thechapter with \thesection

I just updated to 0.21 and works fine inmediately.

Thanks you.

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

Herbert Voss wrote:
 does your first document class have chapters? if not, you have
 to change \thechapter with \thesection

I just updated to 0.21 and works fine inmediately.

Thanks you.

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

Herbert Voss wrote:
> does your first document class have chapters? if not, you have
> to change \thechapter with \thesection

I just updated to 0.21 and works fine inmediately.

Thanks you.

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

A little problem with listings

[German Poo Caaman~o]

I wrote a little text to try listings.

If I try 
\renewcommand\thelstlisting{\thechapter .\arabic{lstlisting}}% captionstyle
on LaTeX preamble (as well as Herbert's example).

When I put \lstlistoflistings the result looks like:
1   .1my Caption

instead of:
1.1 my Caption

the package's version is 0.20  (I can't connect outside to verify
a more updated version)

Thanks in advance,

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

German Poo Caaman~o wrote:
 If I try
 \renewcommand\thelstlisting{\thechapter .\arabic{lstlisting}}% captionstyle
 on LaTeX preamble (as well as Herbert's example).
 
 When I put \lstlistoflistings the result looks like:
 1   .1my Caption
 
 instead of:
 1.1 my Caption

May be it's a bug, because the line is commented, it happens the same.

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

Herbert Voss wrote:
 German Poo Caaman~o wrote:
  When I put \lstlistoflistings the result looks like:
  1   .1my Caption
 
  instead of:
  1.1 my Caption
 
 try it without a space
 \renewcommand\thelstlisting{\thechapter.\arabic{lstlisting}}%

I tryied that whithout success.

 i have version 0.21 of listing-package. if it doesn't help,
 send a short lyx-example file

I tryie with listings.lyx from your page, and the error appears.
But I got some errors: label{prog1} it doesn't recognize by 
LaTeX.  So, I deleted and I change the documento to Report and
a Chapter text was added.

Thanks Herbert. Tomorrow I'll try to download a newer versions
(if my connection allow me).

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[Herbert Voss]

German Poo Caaman~o wrote:

 I tryie with listings.lyx from your page, and the error appears.
 But I got some errors: label{prog1} it doesn't recognize by
 LaTeX.  So, I deleted and I change the documento to Report and
 a Chapter text was added.

does your first document class have chapters? if not, you have
to change \thechapter with \thesection

Herbert

-- 
[EMAIL PROTECTED]
http://perce.de/lyx/

A little problem with listings

[German Poo Caaman~o]

I wrote a little text to try listings.

If I try 
\renewcommand\thelstlisting{\thechapter .\arabic{lstlisting}}% captionstyle
on LaTeX preamble (as well as Herbert's example).

When I put \lstlistoflistings the result looks like:
1   .1my Caption

instead of:
1.1 my Caption

the package's version is 0.20  (I can't connect outside to verify
a more updated version)

Thanks in advance,

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

German Poo Caaman~o wrote:
 If I try
 \renewcommand\thelstlisting{\thechapter .\arabic{lstlisting}}% captionstyle
 on LaTeX preamble (as well as Herbert's example).
 
 When I put \lstlistoflistings the result looks like:
 1   .1my Caption
 
 instead of:
 1.1 my Caption

May be it's a bug, because the line is commented, it happens the same.

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

Herbert Voss wrote:
 German Poo Caaman~o wrote:
  When I put \lstlistoflistings the result looks like:
  1   .1my Caption
 
  instead of:
  1.1 my Caption
 
 try it without a space
 \renewcommand\thelstlisting{\thechapter.\arabic{lstlisting}}%

I tryied that whithout success.

 i have version 0.21 of listing-package. if it doesn't help,
 send a short lyx-example file

I tryie with listings.lyx from your page, and the error appears.
But I got some errors: label{prog1} it doesn't recognize by 
LaTeX.  So, I deleted and I change the documento to Report and
a Chapter text was added.

Thanks Herbert. Tomorrow I'll try to download a newer versions
(if my connection allow me).

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[Herbert Voss]

German Poo Caaman~o wrote:

 I tryie with listings.lyx from your page, and the error appears.
 But I got some errors: label{prog1} it doesn't recognize by
 LaTeX.  So, I deleted and I change the documento to Report and
 a Chapter text was added.

does your first document class have chapters? if not, you have
to change \thechapter with \thesection

Herbert

-- 
[EMAIL PROTECTED]
http://perce.de/lyx/

A little problem with listings

[German Poo Caaman~o]

I wrote a little text to try listings.

If I try 
\renewcommand\thelstlisting{\thechapter .\arabic{lstlisting}}% captionstyle
on LaTeX preamble (as well as Herbert's example).

When I put \lstlistoflistings the result looks like:
1   .1my Caption

instead of:
1.1 my Caption

the package's version is 0.20  (I can't connect outside to verify
a more updated version)

Thanks in advance,

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

German Poo Caaman~o wrote:
> If I try
> \renewcommand\thelstlisting{\thechapter .\arabic{lstlisting}}% captionstyle
> on LaTeX preamble (as well as Herbert's example).
> 
> When I put \lstlistoflistings the result looks like:
> 1   .1my Caption
> 
> instead of:
> 1.1 my Caption

May be it's a bug, because the line is commented, it happens the same.

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[German Poo Caaman~o]

Herbert Voss wrote:
> German Poo Caaman~o wrote:
> > When I put \lstlistoflistings the result looks like:
> > 1   .1my Caption
> >
> > instead of:
> > 1.1 my Caption
> 
> try it without a space
> \renewcommand\thelstlisting{\thechapter.\arabic{lstlisting}}%

I tryied that whithout success.

> i have version 0.21 of listing-package. if it doesn't help,
> send a short lyx-example file

I tryie with listings.lyx from your page, and the error appears.
But I got some errors: label{prog1} it doesn't recognize by 
LaTeX.  So, I deleted and I change the documento to Report and
a Chapter text was added.

Thanks Herbert. Tomorrow I'll try to download a newer versions
(if my connection allow me).

-- 
German Poo Caaman~o
mailto:[EMAIL PROTECTED]
http://www.ubiobio.cl/~gpoo/chilelindo.html
"La historia no se lee, se escribe"

Re: A little problem with listings

[Herbert Voss]

German Poo Caaman~o wrote:

> I tryie with listings.lyx from your page, and the error appears.
> But I got some errors: label{prog1} it doesn't recognize by
> LaTeX.  So, I deleted and I change the documento to Report and
> a Chapter text was added.

does your first document class have chapters? if not, you have
to change \thechapter with \thesection

Herbert

-- 
[EMAIL PROTECTED]
http://perce.de/lyx/