[Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5
Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file system between 2 node HA cluster for a application that runs on these nodes I have downloaded below packages ocfs2-2.6.18-238.9.1.el5-1.4.9-1.el5.x86_64.r and ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64 Installation goes with out any complains but when its time to configure I get below errors [root@ccbsn01 ~]# /etc/init.d/o2cb configure Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed And in the /var/log/message log I get below error Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. How can I fix this and get this working Thanks and Best Regards___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5
What is your kernel version? Run “uname –r” My guess is that your kernel is not 2.6.18-238.9.1.el5 nor 2.6.18-308.1.1.el5 You will need to install the matching ocfs2-2.6.18-300.el5-1.4.9-1.el5.x86_64 package. From: ocfs2-users-boun...@oss.oracle.com [mailto:ocfs2-users-boun...@oss.oracle.com] On Behalf Of Asanka Gunasekera Sent: Wednesday, September 12, 2012 12:32 AM To: ocfs2-users@oss.oracle.com Subject: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file system between 2 node HA cluster for a application that runs on these nodes I have downloaded below packages ocfs2-2.6.18-238.9.1.el5-1.4.9-1.el5.x86_64.r and ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64 Installation goes with out any complains but when its time to configure I get below errors [root@ccbsn01 ~]# /etc/init.d/o2cb configure Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed And in the /var/log/message log I get below error Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. How can I fix this and get this working Thanks and Best Regards ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5
Hi All, since the post I have made some kind of a progress 1. I upgraded the kernel to 2.6.18-308.1.1.el5 same I was able to download the ocfs2 module is ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64.rpm Looks some what better and below are the outputs Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem configfs: OK Mounting configfs filesystem at /sys/kernel/config: OK Loading filesystem ocfs2_dlmfs: OK Mounting ocfs2_dlmfs filesystem at /dlm: OK Starting O2CB cluster ocfs2: Failed Cluster ocfs2 created Node ocfsn1 added o2cb_ctl: Internal logic failure while adding node ocfsn2 Stopping O2CB cluster ocfs2: OK abd in the messages I time to time get below and I saw in a post that I can ignore this. modprobe: FATAL: Module ocfs2_stackglue not found. By the look of this the ocfs modules are getting added at the boot time as well. Byt yet to attached a shared storage and see the functionality Thanks and Regards From: Asanka Gunasekera asanka_gunasek...@yahoo.co.uk To: ocfs2-users@oss.oracle.com ocfs2-users@oss.oracle.com Sent: Wednesday, 12 September 2012, 13:02 Subject: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file system between 2 node HA cluster for a application that runs on these nodes I have downloaded below packages ocfs2-2.6.18-238.9.1.el5-1.4.9-1.el5.x86_64.r and ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64 Installation goes with out any complains but when its time to configure I get below errors [root@ccbsn01 ~]# /etc/init.d/o2cb configure Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed And in the /var/log/message log I get below error Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. How can I fix this and get this working Thanks and Best Regards ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Ocfs2-users Digest, Vol 105, Issue 4
Seems RPM compatibility issue with OS Kernel. Check OS Kernel and download RPM (4 Nos) for same kernel. Regards, Yuvrajsinh Chauhan || Sr. DBA || CRESTEL-PSG Elitecore Technologies Pvt. Ltd. 904, Silicon Tower || Off C.G.Road Behind Pariseema Building || Ahmedabad || INDIA [GSM]: +91 9727746022 -Original Message- From: ocfs2-users-boun...@oss.oracle.com [mailto:ocfs2-users-boun...@oss.oracle.com] On Behalf Of ocfs2-users-requ...@oss.oracle.com Sent: 12 September 2012 15:53 To: ocfs2-users@oss.oracle.com Subject: Ocfs2-users Digest, Vol 105, Issue 4 Send Ocfs2-users mailing list submissions to ocfs2-users@oss.oracle.com To subscribe or unsubscribe via the World Wide Web, visit https://oss.oracle.com/mailman/listinfo/ocfs2-users or, via email, send a message with subject or body 'help' to ocfs2-users-requ...@oss.oracle.com You can reach the person managing the list at ocfs2-users-ow...@oss.oracle.com When replying, please edit your Subject line so it is more specific than Re: Contents of Ocfs2-users digest... Today's Topics: 1. Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 (Asanka Gunasekera) 2. Re: Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 (Ulf Zimmermann) 3. Re: Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 (Asanka Gunasekera) -- Message: 1 Date: Wed, 12 Sep 2012 08:32:29 +0100 (BST) From: Asanka Gunasekera asanka_gunasek...@yahoo.co.uk Subject: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 To: ocfs2-users@oss.oracle.com ocfs2-users@oss.oracle.com Message-ID: 1347435149.81077.yahoomail...@web133206.mail.ir2.yahoo.com Content-Type: text/plain; charset=utf-8 Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file system between 2 node HA cluster for a application that runs on these nodes I have downloaded below packages ocfs2-2.6.18-238.9.1.el5-1.4.9-1.el5.x86_64.r and ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64 Installation goes with out any complains but when its time to configure I get below errors [root@ccbsn01 ~]# /etc/init.d/o2cb configure Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed And in the /var/log/message log I get below error Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. How can I fix this and get this working Thanks and Best Regards -- next part -- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20120912/0e89d7ae/at tachment-0001.html -- Message: 2 Date: Wed, 12 Sep 2012 08:12:41 + From: Ulf Zimmermann u...@openlane.com Subject: Re: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 To: Asanka Gunasekera asanka_gunasek...@yahoo.co.uk, ocfs2-users@oss.oracle.com ocfs2-users@oss.oracle.com Message-ID: c02f68c8cd065340b1cae3fca873f32580fd3...@msrwc01.corp.autc.com Content-Type: text/plain; charset=utf-8 What is your kernel version? Run ?uname ?r? My guess is that your kernel is not 2.6.18-238.9.1.el5 nor 2.6.18-308.1.1.el5 You will need to install the matching ocfs2-2.6.18-300.el5-1.4.9-1.el5.x86_64 package. From: ocfs2-users-boun...@oss.oracle.com [mailto:ocfs2-users-boun...@oss.oracle.com] On Behalf Of Asanka Gunasekera Sent: Wednesday, September 12, 2012 12:32 AM To: ocfs2-users@oss.oracle.com Subject: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file
Re: [Ocfs2-users] Ocfs2-users Digest, Vol 105, Issue 4
(=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed And in the /var/log/message log I get below error Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. How can I fix this and get this working Thanks and Best Regards -- next part -- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20120912/0e89d7ae/at tachment-0001.html -- Message: 2 Date: Wed, 12 Sep 2012 08:12:41 + From: Ulf Zimmermann u...@openlane.com Subject: Re: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 To: Asanka Gunasekera asanka_gunasek...@yahoo.co.uk, ocfs2-users@oss.oracle.com ocfs2-users@oss.oracle.com Message-ID: c02f68c8cd065340b1cae3fca873f32580fd3...@msrwc01.corp.autc.com Content-Type: text/plain; charset=utf-8 What is your kernel version? Run ?uname ?r? My guess is that your kernel is not 2.6.18-238.9.1.el5 nor 2.6.18-308.1.1.el5 You will need to install the matching ocfs2-2.6.18-300.el5-1.4.9-1.el5.x86_64 package. From: ocfs2-users-boun...@oss.oracle.com [mailto:ocfs2-users-boun...@oss.oracle.com] On Behalf Of Asanka Gunasekera Sent: Wednesday, September 12, 2012 12:32 AM To: ocfs2-users@oss.oracle.com Subject: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file system between 2 node HA cluster for a application that runs on these nodes I have downloaded below packages ocfs2-2.6.18-238.9.1.el5-1.4.9-1.el5.x86_64.r and ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64 Installation goes with out any complains but when its time to configure I get below errors [root@ccbsn01 ~]# /etc/init.d/o2cb configure Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed And in the /var/log/message log I get below error Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. How can I fix this and get this working Thanks and Best Regards -- next part -- An HTML attachment was scrubbed... URL: http://oss.oracle.com/pipermail/ocfs2-users/attachments/20120912/214013c4/at tachment-0001.html -- Message: 3 Date: Wed, 12 Sep 2012 11:22:57 +0100 (BST) From: Asanka Gunasekera asanka_gunasek...@yahoo.co.uk Subject: Re: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5 To: ocfs2-users@oss.oracle.com ocfs2-users@oss.oracle.com Message-ID: 1347445377.99477.yahoomail...@web133201.mail.ir2.yahoo.com Content-Type: text/plain; charset=iso-8859-1 Hi All, since the post I have made some kind of a progress 1. I upgraded the kernel to 2.6.18-308.1.1.el5 same I was able to download the ocfs2 module is ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64.rpm Looks some what better and below are the outputs Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot.? The current values will be shown in brackets ('[]').? Hitting ENTER without typing an answer will keep that current value.? Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms
Re: [Ocfs2-users] Ocfs2-users Digest, Vol 105, Issue 4
On Wed, Sep 12, 2012 at 9:45 AM, Asanka Gunasekera asanka_gunasek...@yahoo.co.uk wrote: Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem configfs: OK Mounting configfs filesystem at /sys/kernel/config: OK Loading filesystem ocfs2_dlmfs: OK Mounting ocfs2_dlmfs filesystem at /dlm: OK Starting O2CB cluster ocfs2: Failed Cluster ocfs2 created Node ocfsn1 added o2cb_ctl: Internal logic failure while adding node ocfsn2 Stopping O2CB cluster ocfs2: OK Something wrong with your cluster.conf. Overlapping node numbers, maybe. abd in the messages I time to time get below and I saw in a post that I can ignore this. modprobe: FATAL: Module ocfs2_stackglue not found. Yes, this is harmless. ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Subject: problem configuring ocfs on rhel5.8 kernel 2.6.18-300.el5
What is the version of the ocfs2-tools? run mkfs.ocfs2 --version to get the tools version. For 1.4.10, you need ocfs2-tools 1.6.3-2. Tiger On 09/12/2012 03:32 PM, Asanka Gunasekera wrote: Hi this is a resend from a subscribed address sorry if I am causing any inconvenience hope some one can help me on this, I have been straggling to get this working for few weeks now. My issue is as below I am just trying to use ocfs2 as shared file system between 2 node HA cluster for a application that runs on these nodes I have downloaded below packages ocfs2-2.6.18-238.9.1.el5-1.4.9-1.el5.x86_64.r and ocfs2-2.6.18-308.1.1.el5-1.4.10-1.el5.x86_64 Installation goes with out any complains but when its time to configure I get below errors /[root@ccbsn01 ~]# /etc/init.d/o2cb configure Configuring the O2CB driver. This will configure the on-boot properties of the O2CB driver. The following questions will determine whether the driver is loaded on boot. The current values will be shown in brackets ('[]'). Hitting ENTER without typing an answer will keep that current value. Ctrl-C will abort. Load O2CB driver on boot (y/n) [y]: Cluster stack backing O2CB [o2cb]: Cluster to start on boot (Enter none to clear) [ocfs2]: Specify heartbeat dead threshold (=7) [31]: Specify network idle timeout in ms (=5000) [3]: Specify network keepalive delay in ms (=1000) [2000]: Specify network reconnect delay in ms (=2000) [2000]: Writing O2CB configuration: OK Loading filesystem ocfs2_dlmfs: Unable to load filesystem ocfs2_dlmfs Failed / And in the /var/log/message log I get below error /Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:21:41 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_stackglue not found. Sep 12 11:33:13 node01 modprobe: FATAL: Module ocfs2_dlmfs not found. /How can I fix this and get this working Thanks and Best Regards ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com https://oss.oracle.com/mailman/listinfo/ocfs2-users