Re: [OmniOS-discuss] Investing into the Future of OmniOS Community Edition

[Alexander Lesle]

Hello,

for small amounts from private persons it will be better
you offer paypal (-donation) too.
https://www.paypal.com/de/cgi-bin/webscr?cmd=_flow=0DhZCUoQyUfgZxqWh-_3fbqRqn5hNJFMTEAow8szClc8p7wgNC3c8pDbUeC=5885d80a13c0db1f8e263663d3faee8dc3f308debf7330dd8d0b0a9f21afd7d3=Merchant__ButtonDesignerFlow___StateButtonDesignerStart=885abefea41ef918124519b9a82d2f77d8c3e533

Invoice online or as pdf I prefer too.

Tobias, few minutes ago I send my donation by bank wire in EURO.
Please check what you get CHF or EURO and how much are the bank
charges from your Postfinance AG.
Maybe its better when you have a bank account in the EURO-Zone
(Germany, France are near to you) because few banks collecting
bank charges by wiring to Switzerland.
Feedback by PN please.

On November, 27 2017, 10:15  wrote in [1]:

> hello Tobias

> A pure donation modell (pay for something that is available for free) is
> only ok for small amounts from private persons.

> Can this be extended by
> - a function to request a quotation with a given amount together with a
> (pro forma) invoice online what makes institutional/edu payments possible
> (to accept this quotation, pay the amount until..)

> - with some sort of an extra offer over the free offerings
> maybe a Pro subscription to beta/ bloody releases, a knowledgebase or a
> plus repository

> Gea
-- 
Best Regards
Alexander
November, 27 2017

[1] mid:b9446f72-0d97-ed5c-1f8c-195c0f511...@hfg-gmuend.de


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Investing into the Future of OmniOS Community Edition

[Alexander Lesle]

Guten Abend Tobias Oetiker,

at https://omniosce.org/patron are no information about the
payment methods.
Can you offer for the Europeans your account informations
IBAN and BIC on this page please.

-- 
Best Regards
Alexander
November, 27 2017

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Questions about - End the uncertainty -

[Alexander Lesle]

Hello @all,

Is there a option to add the rpool_Customize
https://omnios.omniti.com/wiki.php/ISOrpoolCustomize
in the installer too?

On Juli, 07 2017, 20:52  wrote in [1]:

> On Fri, 7 Jul 2017 11:14:25 -0400
> Dan McDonald  wrote:

>> During the r151024 timeframe, one of the things on my plate was going to be 
>> a "install postprocessing" menu option on the Kayak menu.  The idea would be 
>> if you wanted to get things set prior to your next boot, you'd go into that. 
>>  It seemed appropriate for an interactive installer, while still keeping the 
>> spirit of REALLY FAST, DAMMIT that Kayak embodied.
>> 
>> My suggestion, and you can dismiss it of course, it to build the 
>> postprocessing menu option.  It'd bring up a new screen, full of choices 
>> like "configure networking", "Set root password", "Add users", etc. etc.
>> 

> This is exactly the same ideas I have;-)

> Add to this that the user should be able to apply a preseed to the
> installer (Think of Debian) to have all that done automatically -
> imagine being able to remote install through PXE both Omnios and
> detailed configuration and installation of extra stuff.


-- 
Best Regards
Alexander
Juli, 10 2017

[1] mid:20170707205216.2338d...@sleipner.datanom.net


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Legal next steps

[Alexander Lesle]

Hello,

Switzerland or EU sounds good.

No NSA or U.S. laws pressure to code a backdoor for them.

On 16. May 2017 at 16:19  wrote
in mid:680c52d7-4157-4f9e-ab69-375380cf4...@oetiker.ch :
> In switzerland, any three people
> can found an association by stating that they do so and
> creating a bylaws document. no fees. no official registration
> necessary. only if substantial money is handled or if there is
> profit, the association has to talk to the swiss irs.


> https://en.wikipedia.org/wiki/Swiss_association


> I'll be glad to help :)


> cheers
> tobi


> Tobias Oetiker
> t...@oetiker.ch
> 062 775 9902

> On 16 May 2017, at 15:47, Doug Hughes  wrote:


>  
> Having done this once before, if done in the USA, NJ and DE
> are   somewhat preferred states for ease of such 501c3
> incorporation.   lowest fees, smallest hurdles, etc.
> If NJ.US is acceptable/chosen I'm very proximate to Trenton
> and   could facilitate any in-person matters.


> On 5/16/2017 9:22 AM, Theo Schlossnagle   wrote:
> My experience here is limited to the United States for
> approaching these problems.  I don't mean to indicate that 
> it is the right solution, but I can only speak of what I know.  

> 
> A legal entity must hold the assets. That can be a person,
> or a trust, or an corporation or a community*, etc.  Community 
> here is defined in such a way by the IRS that I don't believe  
> we would ever quality (and it's never worth arguing). Given
> the history of "things" I would steer away from an individual  
> and I feel that given unknown nature of assets required to 
> operate and our weak starting point that a trust is likely not  
> self-sustaining.
>   

> 
> What I would suggest is us setting up an corporation here 
> in the US, setting a purpose and a missions statement (that
> includes education and science as we do those and they are 
> eligible for non-profit status), elect 5-7 board members   
> (who will be legally responsible for the entity) come up   
> with a small operating budget (< $10k USD) and apply for   
> non-profit (501(3)c).  This process would take a fewhundreds of 
> dollars.

> 
> Then we request that OmniTI donate the appropriate assets 
> related to OmniOS.  This organization can take donations   
> (from basically anywhere) and apply them to operational
> costs to forward its mission.  There is a chance that this 
> organization could be denied non-profit status as the IRS is   
> (sadly) a bit odd when it comes to approving that for  
> initiatives for the public good if their around open source
> software.  I don't see that as a specific risk, it only
> means that donations made are not tax-deductible.  

> 
> The gating factors here is can we get 5-7 people willing  
> to participate as legally responsible board members (I am  
> not a lawyer, but the risk is very lower here as there is   very little 
> money involved).

> 
> Back to my first point, if there is a better avenue   
> outside the United States for this, I would love to be  educated 
> about it.

> 
> Best regards,  

> 
> Theo  

>  -- 
>   
>   
> Theo Schlossnagle
>   
> http://omniti.com/is/theo-schlossnagle
>   


>   
>   
> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss

>   

> ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss

>  

-- 
Mit freundlichem Gruss
Alexander
mailto:gro...@tierarzt-mueller.de
eMail geschrieben mit: The Bat! 7.4.16
unter Windows 10 Pro x64 Build 14393


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Setup problems with newest OmniOS 151021 on ESXi 6.5

[Alexander Lesle]

Hello Guenther Alka and List,

On April, 14 2017, 12:20  wrote in [1]:

> I found a strange behaviour with the newest 151021 when I tried to setup
> on ESXi 6.5

> I created a new VM (Solaris 11-64)  with a DVD device connected to the
> OS .iso.
> On first boot of the VM, the ESXi web console crashed completely with a
> required reload.

Günther, the same problem with the Sphere Client 6.0.0?
You can setup the new VM with the web console first and start the
VM and the console with Sphere Client.

-- 
Best Regards
Alexander
April, 14 2017

[1] mid:035e3a4c-adda-287a-5ef4-15c08c465...@hfg-gmuend.de


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Setup problems with newest OmniOS 151021 on ESXi 6.5

[Alexander Lesle]

Hello Dan McDonald and List,

On April, 14 2017, 16:14  wrote in [1]:

>> On Apr 14, 2017, at 6:20 AM, Guenther Alka  wrote:
>> 
>> I found a strange behaviour with the newest 151021 when I tried to setup on 
>> ESXi 6.5
>> 
>> I created a new VM (Solaris 11-64)  with a DVD device connected to the OS 
>> .iso.
>> On first boot of the VM, the ESXi web console crashed completely with a 
>> required reload.
>> 
>> After reload, the VM console shows a
>> - configuring devices
>> - ..requesting system maintenance, press ctrl-d to continue
>> 
>> After ctrl-d I was able to select a bootdisk and install OmniOS
>> After setup, reboot work
>> 
>> A power off/on and the ESXi webconsole crashes again (mostly, not always)

> Are you saying that older r151021s did not have this problem?
I am using r151020 on ESXi 6.5 with no problems such as Guenther
describe with r151021.

-- 
Best Regards
Alexander
April, 14 2017

[1] mid:ad95163f-aed0-431f-9cd6-20f35d628...@omniti.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Supermicro X10SLL-F

[Alexander Lesle]

Hello Michael Rasmussen and List,

maybe the fans from supermicro are the better way.
https://www.supermicro.com/support/resources/Thermal/#FAN

On Oktober, 03 2016, 22:39  wrote in [1]:

> Outstanding unresolved issues:
> Case fans are Arctic F8 PWM
> (http://www.newegg.com/Product/Product.aspx?Item=N82E16835186072)
> and Arctic F12 PWM
> (http://www.newegg.com/Product/Product.aspx?Item=N82E16835186033)
> Problem: Even though fan speed is controlled by Supermicro fan mode no
> speed readings are available (display N/A). Maybe this is because the
> Arctic fans are all revision 1 but to sure to have working speed
> readings I have ordered new fans from Noctua.
> A couple of Noctua NF-A8 PWM
> (http://www.newegg.com/Product/Product.aspx?Item=9SIA9PV3Y64158)
> A couple of Noctua NF-S12A
> (http://www.newegg.com/Product/Product.aspx?Item=N82E16835608038)

> Anybody having experience with these fans on supermicro boards?

-- 
Best Regards
Alexander
Oktober, 04 2016

[1] mid:20161003223940.7e954...@sleipner.datanom.net


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] fan control

[Alexander Lesle]

Hello Richard Elling and List,

all my 3 server with supermicro boards powered the fans with full
throttle after power on. After few seconds the speed go to low speed.
I have set the Fan Speed Control Modes to Balanced so they all run
with +/- 1700 RPM.
At Reboot the fans do not turn up to full speed the stay balanced.


On Mai, 25 2016, 02:21  wrote in [1]:

> On May 24, 2016, at 4:37 PM, Robert Fantini  wrote:

> I'll check that the next time I'm at the server room, which will not be for a 
> week.

> Will check then.




> yeah, there is a weird interaction whereby power-on-boot goes to full fans, 
> but a
> reboot goes to normal fans. Surely there is software somewhere that controls 
> this,
> but haven’t found the time to track it down.
>  — richard


> Thanks for the fast response!



> On Tue, May 24, 2016 at 7:33 PM, Richard Elling
>  wrote:



> On May 24, 2016, at 4:28 PM, Robert Fantini  wrote:

> we've installed napp-it to a couple of systems .   they run a lot
> louder - fans do not seem to be controlled from software. 

> is there a software package that that can be installed to handle sensors and 
> fans?

> Or is this something to deal with in Supermicro bios?




> Do the fans slow after a warm reboot?
>  — richard


>  ___
> OmniOS-discuss mailing list
> OmniOS-discuss@lists.omniti.com
> http://lists.omniti.com/mailman/listinfo/omnios-discuss



>  
> --


> richard.ell...@richardelling.com
> +1-760-896-4422


>   


>  


>  
> --


> richard.ell...@richardelling.com
> +1-760-896-4422


>   
>  
-- 
Best Regards
Alexander
Mai, 25 2016

[1] mid:0907c745-f18c-4faa-9174-1d8e29a02...@richardelling.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] trouble with ashift and 4k blocks

[Alexander Lesle]

Hello Doug Hughes and List,

I use the same HGST drive and they have all 4 TB capacity in my pools.

,-[  ]-
|
| AVAILABLE DISK SELECTIONS:
|0. c2t0d0 VMware-Virtualdisk-1.0 cyl 5012 alt 2 hd 224 sec 56
|   /pci@0,0/pci15ad,1976@10/sd@0,0
|1. c2t1d0 VMware-Virtualdisk-1.0 cyl 5012 alt 2 hd 224 sec 56
|   /pci@0,0/pci15ad,1976@10/sd@1,0
|2. c4t5000CCA23DCCC6BCd0 ATA-HGST HDS724040AL-A580-3.64TB
|   /scsi_vhci/disk@g5000cca23dccc6bc
|3. c4t5000CCA23DCD21A4d0 ATA-HGST HDS724040AL-A580-3.64TB
|   /scsi_vhci/disk@g5000cca23dcd21a4
|4. c4t5000CCA23DCD25A1d0 ATA-HGST HDS724040AL-A580-3.64TB
|   /scsi_vhci/disk@g5000cca23dcd25a1
| Specify disk (enter its number):
|
`---

When you wrote only one item in sd.conf you must write a ; and not ,
at last letter.
But this HDD you must not list in sd.conf it will present ashift=12.

,-[  ]-
|
| root@aio:/root# zdb -C
| pool_aio:
| version: 5000
| name: 'pool_aio'
| state: 0
| txg: 5222458
| pool_guid: 11088269185580178933
| hostid: 720590413
| hostname: 'aio'
| vdev_children: 1
| vdev_tree:
| type: 'root'
| id: 0
| guid: 11088269185580178933
| children[0]:
| type: 'mirror'
| id: 0
| guid: 1388041250297859353
| metaslab_array: 33
| metaslab_shift: 35
| ashift: 12
| asize: 4000773570560
| is_log: 0
| create_txg: 4
| children[0]:
| type: 'disk'
| id: 0
| guid: 18178429901005250887
| path: '/dev/dsk/c4t5000CCA23DCCC6BCd0s0'
| devid: 'id1,sd@n5000cca23dccc6bc/a'
| phys_path: '/scsi_vhci/disk@g5000cca23dccc6bc:a'
| whole_disk: 1
| DTL: 45
| create_txg: 4
| children[1]:
| type: 'disk'
| id: 1
| guid: 12635800974590752762
| path: '/dev/dsk/c4t5000CCA23DCD21A4d0s0'
| devid: 'id1,sd@n5000cca23dcd21a4/a'
| phys_path: '/scsi_vhci/disk@g5000cca23dcd21a4:a'
| whole_disk: 1
| DTL: 43
| create_txg: 4
| children[2]:
| type: 'disk'
| id: 2
| guid: 15588560262687738746
| path: '/dev/dsk/c4t5000CCA23DCD25A1d0s0'
| devid: 'id1,sd@n5000cca23dcd25a1/a'
| phys_path: '/scsi_vhci/disk@g5000cca23dcd25a1:a'
| whole_disk: 1
| DTL: 41
| create_txg: 4
| features_for_read:
| com.delphix:hole_birth
| com.delphix:embedded_data
|
`---
,-[  ]-
|
| root@aio:/root# zdb | egrep 'ashift| name'
| name: 'pool_aio'
| ashift: 12
| name: 'rpool'
| ashift: 9
|
`---

I think its a hardware issue.
Test this what Michael Talbott wrote.

On August, 22 2015, 23:49 Doug Hughes wrote in [1]:

 I'm following this page: 
 http://wiki.illumos.org/display/illumos/ZFS+and+Advanced+Format+disks

 but I just can't get my HGST 4K disks to get the 4TB capacity in the zpool.

 I've cross referenced and verified multiple times and this should work
 for sd_config_list=

  ATA HGST HDS724040AL, physical-block-size:4096,
-- 
Best Regards
Alexander
August, 23 2015

[1] mid:55d8ee55.7090...@will.to


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] OmniOS Bloody update for Feb 18

[Alexander Lesle]

Hello Dan McDonald and List,

do your remember my feature request?
,-[  ]-
|
| at Friday, 3. Okt. 2014 17:22 Dan McDonald
| at mid:a762c059-f687-42de-a1f7-6cf2a7f58...@omniti.com wrote:
| 
|  On Oct 3, 2014, at 9:29 AM, Alexander Lesle
|  gro...@tierarzt-mueller.de wrote:
| 
|  Hello Dan McDonald and List,
|  
|  in my mind this was a great proposal what you done at Sep, 02.
|  That's the way to build a great OmniOS near to the users.
|  
|  Here my request for the next release:
|  It would be convenient if open-vm-tools were installed in the new
|  release. http://sourceforge.net/projects/open-vm-tools/files/
| 
|  Actually, this work has been done.  I dropped it on the ground:
| 
|  https://github.com/omniti-labs/omnios-build/pull/39
| 
|  I will be merging this pull requests now in the master branch,
|  and seeing how OOod chews on it.
| 
| 
|  I know there's other work to be done for OmniOS-as-a-guest as well.
| 
|  Thanks,
|  DAn
|
`---

Do you find the time to integrate open-vm-tools in the next stable
version?

Thanks.

On Februar, 19 2015, 03:36 Dan McDonald wrote in [1]:

 There will be only 1-3 more updates prior to the next OmniOS stable
 (and for this time, this stable is also Long-Term Support) release. 
 If you notice anything weird about the bloody bits, please let me
 know ASAP.  I've heard little/no complaints about the updates to
 pkg(5), so either you're very happy, or not using it.  :)

 This update will only be reaching the repo.

 * omnios-build master branch, revision f3d6d48

 * Git to 2.3.0.

 * UnZIP fixes.

 * OpenJDK7 up to update 76, build 31.

 * Microtasking libraries (/lib/libmtsk*) are back as a distinct package
   (system/library/mtsk) now that they are not part of the (now open-source)
   Math libraries.

 * illumos-omnios master branch, revision cbf73e4 (last illumos-gate merge 
 336069c)

 * Bugfixes in PF_PACKET, SMB/CIFS, header files, NFS, and man pages.

-- 
Best Regards
Alexander
Februar, 20 2015

[1] mid:f70c482d-68e8-43a2-bf73-86ade4b63...@omniti.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] OmniOS Bloody update for Feb 18

[Alexander Lesle]

Hello Dan McDonald and List,

thanks for your offer, but I cant do that because I am not a omnios
expert enough and my english is not very well.

On Februar, 20 2015, 16:27 Dan McDonald wrote in [1]:

 Are you two volunteering for testing?  If so, I can see what I can
 do about pushing the package (without it being in an incorporation)
 into the bloody repo server -- assuming I can build it properly.


 Dan

 Sent from my iPhone (typos, autocorrect, and all)

 On Feb 20, 2015, at 9:20 AM, Schweiss, Chip c...@innovates.com wrote:


 I will second that request as my OmniOS experiments always start as VMware 
 VMs.


 -Chip


 On Fri, Feb 20, 2015 at 3:17 AM, Alexander Lesle
 gro...@tierarzt-mueller.de wrote:

 Hello Dan McDonald and List,
  
  do your remember my feature request?
  ,-[  ]-
  |
  | at Friday, 3. Okt. 2014 17:22 Dan McDonald
  | at mid:a762c059-f687-42de-a1f7-6cf2a7f58...@omniti.com wrote:
  |
  |  On Oct 3, 2014, at 9:29 AM, Alexander Lesle
  |  gro...@tierarzt-mueller.de wrote:
  |
  |  Hello Dan McDonald and List,
  | 
  |  in my mind this was a great proposal what you done at Sep, 02.
  |  That's the way to build a great OmniOS near to the users.
  | 
  |  Here my request for the next release:
  |  It would be convenient if open-vm-tools were installed in the new
  |  release. http://sourceforge.net/projects/open-vm-tools/files/
  |
  |  Actually, this work has been done.  I dropped it on the ground:
  |
  |  https://github.com/omniti-labs/omnios-build/pull/39
  |
  |  I will be merging this pull requests now in the master branch,
  |  and seeing how OOod chews on it.
  |
  |
  |  I know there's other work to be done for OmniOS-as-a-guest as well.
  |
  |  Thanks,
  |  DAn
  |
  `---
  
  Do you find the time to integrate open-vm-tools in the next stable
  version?
  
  Thanks.
  
  On Februar, 19 2015, 03:36 Dan McDonald wrote in [1]:
  
  There will be only 1-3 more updates prior to the next OmniOS stable
  (and for this time, this stable is also Long-Term Support) release.
  If you notice anything weird about the bloody bits, please let me
  know ASAP.  I've heard little/no complaints about the updates to
  pkg(5), so either you're very happy, or not using it.  :)
  
  This update will only be reaching the repo.
  
  * omnios-build master branch, revision f3d6d48
  
  * Git to 2.3.0.
  
  * UnZIP fixes.
  
  * OpenJDK7 up to update 76, build 31.
  
  * Microtasking libraries (/lib/libmtsk*) are back as a distinct package
(system/library/mtsk) now that they are not part of the (now open-source)
Math libraries.
  
  * illumos-omnios master branch, revision cbf73e4 (last illumos-gate merge 
  336069c)
  
  * Bugfixes in PF_PACKET, SMB/CIFS, header files, NFS, and man pages.
  
  --
  Best Regards
  Alexander
  Februar, 20 2015
  
  [1] mid:f70c482d-68e8-43a2-bf73-86ade4b63...@omniti.com
  
  

  ___
  OmniOS-discuss mailing list
  OmniOS-discuss@lists.omniti.com
  http://lists.omniti.com/mailman/listinfo/omnios-discuss
  

  

 ___
 OmniOS-discuss mailing list
 OmniOS-discuss@lists.omniti.com
 http://lists.omniti.com/mailman/listinfo/omnios-discuss

  
-- 
Best Regards
Alexander
Februar, 20 2015

[1] mid:a19863f3-e121-445e-bf4b-da5c97ef3...@omniti.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

[OmniOS-discuss] Kernel panic - I cant find the problem

[Alexander Lesle]

Hello All,

today it was Update-time for my servers. After typing reboot the
system hang on reboot. Ok, looking by iKVM what happend and there I
see on the screen that the server was restarted after a kernel panic.

I cant solve the problem because I dont understand where the problem
is.
Please help.

,-[  ]-
|
| root@aio:/root# fmdump -Vp -u da148174-fd91-4572-b639-b4fef8253f70
| TIME   UUID
| SUNW-MSG-ID
| 
| Dec 16 2014 15:30:39.077759000 da148174-fd91-4572-b639-b4fef8253f70
| SUNOS-8000-KL
| 
| 
| nvlist version: 0
| version = 0x0
| class = list.suspect
| uuid = da148174-fd91-4572-b639-b4fef8253f70
| code = SUNOS-8000-KL
| diag-time = 1418740239 75809
| de = fmd:///module/software-diagnosis
| fault-list-sz = 0x1
| fault-list = (array of embedded nvlists)
| (start fault-list[0])
| nvlist version: 0
| version = 0x0
| class = defect.sunos.kernel.panic
| certainty = 0x64
| asru =
| sw:///:path=/var/crash/unknown/.da148174-fd91-4572-b639-b4fef8253f70
| 
| resource =
| sw:///:path=/var/crash/unknown/.da148174-fd91-4572-b639-b4fef8253f70
| 
| savecore-succcess = 1
| dump-dir = /var/crash/unknown
| dump-files = vmdump.2
| os-instance-uuid =
| da148174-fd91-4572-b639-b4fef8253f70
| 
| panicstr = BAD TRAP: type=e (#pf Page fault)
| rp=ff00103bd790 addr=f7afe4f0
| 
| panicstack = unix:real_mode_stop_cpu_stage2_end+9e23
| () | unix:trap+db3 () | unix:cmntrap+e6 () | cmlb:cmlb_validate+0 () |
| sd:sdopen+35f () | genunix:dev_open+30 () | specfs:spec_open+206 () |
| genunix:fop_open+89 () | genunix:vn_openat+234 () | genunix:copen+20c
| () | genunix:openat32+27 () | genunix:open32+25 () |
| unix:brand_sys_sysenter+1c9 () |
| 
| crashtime = 1418740182
| panic-time = Tue Dec 16 15:29:42 2014 CET
| (end fault-list[0])
| 
| fault-status = 0x1
| severity = Major
| __ttl = 0x1
| __tod = 0x5490420f 0x4a28218
| 
| root@aio:/root#
|
`---

Attachments / Dateianlagen:

[1] messages.1


Happy new year to you all.
-- 
Best Regards
Alexander
Dezember, 31 2014

messages.1
Description: Binary data
___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] LSI SAS3041e-HP

[Alexander Lesle]

Hello Fábio,

first download on the LSI website:
http://www.lsi.com/support/pages/download-results.aspx?component=Storage+Componentproductfamily=Legacy+Host+Bus+Adaptersproductcode=P00056assettype=Firmwareproductname=LSI+SAS+3041E-R
this two files:

SAS3041ER_ Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows
http://www.lsi.com/downloads/Public/Host%20Bus%20Adapters/Host%20Bus%20Adapters%20Common%20Files/SAS_SATA_3G_P21/SAS3041ER_%20Package_P21_IR_IT_Firmware_BIOS_for_MSDOS_Windows.zip
SASFlash Quick Reference Guide
http://www.lsi.com/downloads/Public/Obsolete/Obsolete%20Common%20Files/SASFlash_Ref_Guide.zip

Unzip the first file and copy all the files not the folders on your
USB-Stick - in a new folder e.g. named sas3041 not more than 8
letters.
Boot to DOS, switch to c:\sas3041 and first I recommend to do
'sasflash -list' and write down all infos about the card first.
You know now the Chip Version and the SAS Address.

Now you can run the 'hbaFlash.bat', select CardType, PCIType, IT-Mode
and Chipversion.
The batch first flash the Firmware and here you get maybe a message that
the ProduktID an VendorID does not match. Type Y to flash anyway.
After flashing Firmware you MUST get the message Firmware Flash
Successful
the same with the second flash BIOS you MUST get the successfull
message too and Finished Processing Commands Successfully.
You have done your card is now in IT-Mode and reflashed to LSI.

When sasflash breaks and you cant flash the card because it is
branded to HP - you have to erase the card first.
Reboot than 'sasflash -o -e X' X=Parameter
I always use Parameter=6 when I want to reflash to a LSI card.
Do NOT reboot after erase - run the batch file and than set the
SAS Address with 'sasflash -o -sasadd 500x' (x= numbers for SAS address)
You have done.

Check the driver - see Eric Sproul's recommendation yesterday.
If OmniOS use the driver mpt I would check it out
Parameter=7 to change to mpt_sas.

Good luck. :)

am Mittwoch, 27. August 2014 um 00:23 hat Fábio Rabelo u.a.
in mid:caeeky64ws9my61ab3otsxdudtryc3dyjfj17zg1salxicqr...@mail.gmail.com 
geschrieben:

 So, how I can flash a 1064E-IR to became a 1064E-IT ?
-- 
Mit freundlichem Gruss
Alexander
mailto:gro...@tierarzt-mueller.de
eMail geschrieben mit: The Bat! 5.8.8
unter Windows 7 Pro Service Pack 1


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

[OmniOS-discuss] Oracle Java v7u65

[Alexander Lesle]

Hello All

Is it possible to install Oracle Java v7u65 JRE to OI?
Is there a package available?
And how to do the installation.

Thanks.

-- 
Best Regards
Alexander
Juli, 24 2014

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Oracle Java v7u65

[Alexander Lesle]

Hello Theo Schlossnagle and List,

you are right. Sorry.

At the moment I mean OmniOS.

On Juli, 24 2014, 20:32 Theo Schlossnagle wrote in [1]:

 Do you mean to OmniOS OI is a different distribution.


 On Thu, Jul 24, 2014 at 2:25 PM, Alexander Lesle
 gro...@tierarzt-mueller.de wrote:
  
 Hello All
  
  Is it possible to install Oracle Java v7u65 JRE to OI?
  Is there a package available?
  And how to do the installation.
  
  Thanks.
  
  --
  Best Regards
  Alexander
  Juli, 24 2014
  
  ___
  OmniOS-discuss mailing list
  OmniOS-discuss@lists.omniti.com
  http://lists.omniti.com/mailman/listinfo/omnios-discuss
  





-- 
Best Regards
Alexander
Juli, 24 2014

[1] mid:caclsapuqenqy4vfbtsaz_s2_e5tf3zwk_-5ear--m-ncfk9...@mail.gmail.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Oracle Java v7u65

[Alexander Lesle]

Hello Theo Schlossnagle and List,

You mean this file jre-7u65-solaris-i586.tar.gz from java.com
Only unpack in /opt/
Nothing else? No Var setting in PATH??
So easy? :))

On Juli, 24 2014, 20:40 Theo Schlossnagle wrote in [1]:

 I usually download the gzip tarball for i586 and x86_64 for Solaris 10.  And 
 untar it in /opt/


 On Thu, Jul 24, 2014 at 2:36 PM, Alexander Lesle
 gro...@tierarzt-mueller.de wrote:
  
 Hello Theo Schlossnagle and List,
  
  you are right. Sorry.
  
  At the moment I mean OmniOS.
  
  On Juli, 24 2014, 20:32 Theo Schlossnagle wrote in [1]:
  

  Do you mean to OmniOS OI is a different distribution.
  
  
  On Thu, Jul 24, 2014 at 2:25 PM, Alexander Lesle
  gro...@tierarzt-mueller.de wrote:
 
  Hello All
 
   Is it possible to install Oracle Java v7u65 JRE to OI?
   Is there a package available?
   And how to do the installation.
 
   Thanks.
 
   --
   Best Regards
   Alexander
   Juli, 24 2014
 
   ___
   OmniOS-discuss mailing list
   OmniOS-discuss@lists.omniti.com
   http://lists.omniti.com/mailman/listinfo/omnios-discuss
 
  
  
  
  
  
  --
  Best Regards
  Alexander
  Juli, 24 2014
  
  [1]
 mid:caclsapuqenqy4vfbtsaz_s2_e5tf3zwk_-5ear--m-ncfk9...@mail.gmail.com
  
  

  ___
  OmniOS-discuss mailing list
  OmniOS-discuss@lists.omniti.com
  http://lists.omniti.com/mailman/listinfo/omnios-discuss
  





-- 
Best Regards
Alexander
Juli, 24 2014

[1] mid:CACLsApvqJW1Uuw84+Js=_Z7bGY9oCQfy=k6zuugxkvnz641...@mail.gmail.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Granular control of fma modules

[Alexander Lesle]

Hello List,

sorry for highjacking this thread.

I am searching for informations and helps about disk-transport.conf
and changing properties for a fma modul. But I cant found the right
manual.

Background is that I have insert at the end of the file
/usr/lib/fm/fmd/plugins/disk-transport.conf
setprop interval 6h

Restart fmd and the fmd get faulty.

Where I can get some helps about fma and setting other properties in
the various modules?
Links?
man?


Thanks.

-- 
Best Regards
Alexander
April, 16 2014

[1] mid:etPan.5306518a.507ed7ab.12a0@abp.local


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Pool degraded

[Alexander Lesle]

Hello Kevin Swab and List,

thanks Kevin your contribution helps me.

It would be nice if an official of Illumos or Omnios would confirm it
and would change the man page of zpool(1m).

On April, 08 2014, 22:22 Kevin Swab wrote in [1]:

 The man page seems misleading or incomplete on the subject of
 autoreplace and spares.  Setting 'autoreplace=on' should cause your
 hot spare to kick in during a drive failure - with over 1100 spindles
 running ZFS here, we've had the opportunity to test it many times! ;-)

 I couldn't find any authoratative references for this, but here's a few
 unautoratative ones:

 http://my.safaribooksonline.com/book/operating-systems-and-server-administration/solaris/9780137049639/managing-storage-pools/ch02lev1sec7

 http://stanley-huang.blogspot.com/2009/09/how-to-set-autoreplace-in-zfs-pool.html

 http://www.datadisk.co.uk/html_docs/sun/sun_zfs_cs.htm

 Hope this helps,
 Kevin

 On 04/08/2014 01:09 PM, Alexander Lesle wrote:
 Hello Kevin Swab and List,
 
 On April, 08 2014, 20:17 Kevin Swab wrote in [1]:
 
 Instead of a 'zpool remove ...', you want to do a 'zpool detach ...' to
 get rid of the old device.
 
 thats it.
 zpool detach ... removes the broken device from the pool.
 
 If you turn the 'autoreplace' property on
 for the pool, the spare will automatically kick in the next time a drive
 fails...
 
 Are you sure? Because the man zpool tell me other:
 
 ,-[ man zpool ]-
 |
 | autoreplace=on | off
 | 
 |  Controls automatic device replacement. If set to  off,
 |  device  replacement must be initiated by the administra-
 |  tor by using the zpool  replace  command.  If  set  to
 |  on,  any  new device, found in the same physical loca-
 |  tion as a device that previously belonged to  the  pool,
 |  is  automatically  formatted  and  replaced. The default
 |  behavior is off. This property can also be referred to
 |  by its shortened column name, replace.
 |
 `---
 
 I understand it that when I pull out a device and put a new device in
 the _same_ Case-Slot ZFS make a resilver and ZFS pull out the old one
 automatically.
 When the property if off I have use the command zpool replace ... ...
 what I have done.
 
 But in my case, the spare device was in the Case and _named for_ this
 pool
 So the 'Hot Spares-Section' tells
 ,-[ man zpool ]-
 |
 | ZFS allows devices to  be  associated  with  pools  as  hot
 | spares.  These  devices  are not actively used in the pool,
 | but  when  an  active  device  fails,  it  is  automatically
 | replaced  by  a hot spare.
 |
 `---
 
 Or I have misunderstood.
 
 On 04/08/2014 12:13 PM, Alexander Lesle wrote:
 Hello All,

 I have a pool with mirrors and one spare.
 Now my pool is degraded and I though that Omnios/ZFS activate the
 spare itself and make a resilvering.

 # zpool status -x
   pool: pool_ripley
  state: DEGRADED
 status: One or more devices could not be opened.  Sufficient replicas 
 exist for
 the pool to continue functioning in a degraded state.
 action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
   scan: resilvered 84K in 0h0m with 0 errors on Sun Mar 23 15:09:08 2014
 config:

 NAME   STATE READ WRITE CKSUM
 pool_ripleyDEGRADED 0 0 0
   mirror-0 DEGRADED 0 0 0
 c1t5000CCA22BC16BC5d0  ONLINE   0 0 0
 c1t5000CCA22BEEF6A3d0  UNAVAIL  0 0 0  cannot open
   mirror-1 ONLINE   0 0 0
 c1t5000CCA22BC8D31Ad0  ONLINE   0 0 0
 c1t5000CCA22BF612C4d0  ONLINE   0 0 0
   .
   .
   .

 spares
   c1t5000CCA22BF5B9DEd0AVAIL

 But nothing done.
 OK, then I do it myself.
 # zpool replace -f pool_ripley c1t5000CCA22BEEF6A3d0 c1t5000CCA22BF5B9DEd0
 Resilvering is starting immediately.

 # zpool status -x
   pool: pool_ripley
  state: DEGRADED
 status: One or more devices could not be opened.  Sufficient replicas 
 exist for
 the pool to continue functioning in a degraded state.
 action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
   scan: resilvered 1.53T in 3h12m with 0 errors on Sun Apr  6 17:48:51 2014
 config:

 NAME STATE READ WRITE CKSUM
 pool_ripley  DEGRADED 0 0 0
   mirror-0   DEGRADED 0 0 0
 c1t5000CCA22BC16BC5d0ONLINE   0 0 0
 spare-1  DEGRADED 0 0 0
   c1t5000CCA22BEEF6A3d0  UNAVAIL  0 0 0  cannot 
 open
   c1t5000CCA22BF5B9DEd0  ONLINE   0 0 0
   mirror-1   ONLINE   0

[OmniOS-discuss] Pool degraded

[Alexander Lesle]

Hello All,

I have a pool with mirrors and one spare.
Now my pool is degraded and I though that Omnios/ZFS activate the
spare itself and make a resilvering.

# zpool status -x
  pool: pool_ripley
 state: DEGRADED
status: One or more devices could not be opened.  Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
   see: http://illumos.org/msg/ZFS-8000-2Q
  scan: resilvered 84K in 0h0m with 0 errors on Sun Mar 23 15:09:08 2014
config:

NAME   STATE READ WRITE CKSUM
pool_ripleyDEGRADED 0 0 0
  mirror-0 DEGRADED 0 0 0
c1t5000CCA22BC16BC5d0  ONLINE   0 0 0
c1t5000CCA22BEEF6A3d0  UNAVAIL  0 0 0  cannot open
  mirror-1 ONLINE   0 0 0
c1t5000CCA22BC8D31Ad0  ONLINE   0 0 0
c1t5000CCA22BF612C4d0  ONLINE   0 0 0
  .
  .
  .

spares
  c1t5000CCA22BF5B9DEd0AVAIL

But nothing done.
OK, then I do it myself.
# zpool replace -f pool_ripley c1t5000CCA22BEEF6A3d0 c1t5000CCA22BF5B9DEd0
Resilvering is starting immediately.

# zpool status -x
  pool: pool_ripley
 state: DEGRADED
status: One or more devices could not be opened.  Sufficient replicas exist for
the pool to continue functioning in a degraded state.
action: Attach the missing device and online it using 'zpool online'.
   see: http://illumos.org/msg/ZFS-8000-2Q
  scan: resilvered 1.53T in 3h12m with 0 errors on Sun Apr  6 17:48:51 2014
config:

NAME STATE READ WRITE CKSUM
pool_ripley  DEGRADED 0 0 0
  mirror-0   DEGRADED 0 0 0
c1t5000CCA22BC16BC5d0ONLINE   0 0 0
spare-1  DEGRADED 0 0 0
  c1t5000CCA22BEEF6A3d0  UNAVAIL  0 0 0  cannot open
  c1t5000CCA22BF5B9DEd0  ONLINE   0 0 0
  mirror-1   ONLINE   0 0 0
c1t5000CCA22BC8D31Ad0ONLINE   0 0 0
c1t5000CCA22BF612C4d0ONLINE   0 0 0
 .
 .
 .
spares
  c1t5000CCA22BF5B9DEd0  INUSE currently in use

After resilvering I made power-off, unplugged the broken HDD from
Case-slot 1 and switched the Spare from Slot 21 to Slot 1.
The pool is still degraded. The broken HDD I cant remove it.

# zpool remove pool_ripley c1t5000CCA22BEEF6A3d0
cannot remove c1t5000CCA22BEEF6A3d0: only inactive hot spares,
cache, top-level, or log devices can be removed

What can I do to through out the broken HDD and tell ZFS that the
spare is now member of mirror-0 and remove it from the spare list?
Why does not automatically jump in the Spare device and resilver the
pool?

Thanks.

-- 
Best Regards
Alexander
April, 08 2014

___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Pool degraded

[Alexander Lesle]

Hello Kevin Swab and List,

On April, 08 2014, 20:17 Kevin Swab wrote in [1]:

 Instead of a 'zpool remove ...', you want to do a 'zpool detach ...' to
 get rid of the old device.

thats it.
zpool detach ... removes the broken device from the pool.

 If you turn the 'autoreplace' property on
 for the pool, the spare will automatically kick in the next time a drive
 fails...

Are you sure? Because the man zpool tell me other:

,-[ man zpool ]-
|
| autoreplace=on | off
| 
|  Controls automatic device replacement. If set to  off,
|  device  replacement must be initiated by the administra-
|  tor by using the zpool  replace  command.  If  set  to
|  on,  any  new device, found in the same physical loca-
|  tion as a device that previously belonged to  the  pool,
|  is  automatically  formatted  and  replaced. The default
|  behavior is off. This property can also be referred to
|  by its shortened column name, replace.
|
`---

I understand it that when I pull out a device and put a new device in
the _same_ Case-Slot ZFS make a resilver and ZFS pull out the old one
automatically.
When the property if off I have use the command zpool replace ... ...
what I have done.

But in my case, the spare device was in the Case and _named for_ this
pool
So the 'Hot Spares-Section' tells
,-[ man zpool ]-
|
| ZFS allows devices to  be  associated  with  pools  as  hot
| spares.  These  devices  are not actively used in the pool,
| but  when  an  active  device  fails,  it  is  automatically
| replaced  by  a hot spare.
|
`---

Or I have misunderstood.

 On 04/08/2014 12:13 PM, Alexander Lesle wrote:
 Hello All,
 
 I have a pool with mirrors and one spare.
 Now my pool is degraded and I though that Omnios/ZFS activate the
 spare itself and make a resilvering.
 
 # zpool status -x
   pool: pool_ripley
  state: DEGRADED
 status: One or more devices could not be opened.  Sufficient replicas exist 
 for
 the pool to continue functioning in a degraded state.
 action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
   scan: resilvered 84K in 0h0m with 0 errors on Sun Mar 23 15:09:08 2014
 config:
 
 NAME   STATE READ WRITE CKSUM
 pool_ripleyDEGRADED 0 0 0
   mirror-0 DEGRADED 0 0 0
 c1t5000CCA22BC16BC5d0  ONLINE   0 0 0
 c1t5000CCA22BEEF6A3d0  UNAVAIL  0 0 0  cannot open
   mirror-1 ONLINE   0 0 0
 c1t5000CCA22BC8D31Ad0  ONLINE   0 0 0
 c1t5000CCA22BF612C4d0  ONLINE   0 0 0
   .
   .
   .
 
 spares
   c1t5000CCA22BF5B9DEd0AVAIL
 
 But nothing done.
 OK, then I do it myself.
 # zpool replace -f pool_ripley c1t5000CCA22BEEF6A3d0 c1t5000CCA22BF5B9DEd0
 Resilvering is starting immediately.
 
 # zpool status -x
   pool: pool_ripley
  state: DEGRADED
 status: One or more devices could not be opened.  Sufficient replicas exist 
 for
 the pool to continue functioning in a degraded state.
 action: Attach the missing device and online it using 'zpool online'.
see: http://illumos.org/msg/ZFS-8000-2Q
   scan: resilvered 1.53T in 3h12m with 0 errors on Sun Apr  6 17:48:51 2014
 config:
 
 NAME STATE READ WRITE CKSUM
 pool_ripley  DEGRADED 0 0 0
   mirror-0   DEGRADED 0 0 0
 c1t5000CCA22BC16BC5d0ONLINE   0 0 0
 spare-1  DEGRADED 0 0 0
   c1t5000CCA22BEEF6A3d0  UNAVAIL  0 0 0  cannot open
   c1t5000CCA22BF5B9DEd0  ONLINE   0 0 0
   mirror-1   ONLINE   0 0 0
 c1t5000CCA22BC8D31Ad0ONLINE   0 0 0
 c1t5000CCA22BF612C4d0ONLINE   0 0 0
  .
  .
  .
 spares
   c1t5000CCA22BF5B9DEd0  INUSE currently in use
 
 After resilvering I made power-off, unplugged the broken HDD from
 Case-slot 1 and switched the Spare from Slot 21 to Slot 1.
 The pool is still degraded. The broken HDD I cant remove it.
 
 # zpool remove pool_ripley c1t5000CCA22BEEF6A3d0
 cannot remove c1t5000CCA22BEEF6A3d0: only inactive hot spares,
 cache, top-level, or log devices can be removed
 
 What can I do to through out the broken HDD and tell ZFS that the
 spare is now member of mirror-0 and remove it from the spare list?
 Why does not automatically jump in the Spare device and resilver the
 pool?
 
 Thanks.
 


-- 
Best Regards
Alexander
April, 08 2014

[1] mid:53443d37.7020...@colostate.edu


___
OmniOS

Re: [OmniOS-discuss] Bad kernel fault at addr=0xffffff04f8e08b88

[Alexander Lesle]

Hello Ben Summers and List,

On April, 02 2014, 14:01 Ben Summers wrote in [1]:

 I note this is a VMware VM. If you install VMware tools, you will
 get crashes when you power off the VM in some versions of VMware.
 Which VMware are you using?
Yes Omnios is on ESXi5.5 with 2 vnics vmxnet3.
But I dont power off I copies a snapshot from the VM to my standalone
Omnios backup-server. (Napp-it/Job/replicate)

 And can you try it without the VMware
 Host-Guest Filesystem and vmblock features?

Dont understand what I have to do.
Can you explain it for me, please.
-- 

 On 2 Apr 2014, at 12:47, Alexander Lesle
 gro...@tierarzt-mueller.de wrote:

 Hello All
 
 I have had a kernel panic and dont know what happend.
 
 Message on console:
 Apr  2 12:19:42 aio fmd: [ID 377184 daemon.error] SUNW-MSG-ID: 
 SUNOS-8000-KL, TYPE: Defect, VER: 1, SEVERITY: Major
 Apr  2 12:19:42 aio EVENT-TIME: Mi. Apr  2 12:19:42 CEST 2014
 Apr  2 12:19:42 aio PLATFORM: VMware-Virtual-Platform, CSN: 
 VMware-56-4d-8a-b3-c5-36-3b-b8-27-ef-49-0b-c8-94-81-50, HOSTNAME: aio
 Apr  2 12:19:42 aio SOURCE: software-diagnosis, REV: 0.1
 Apr  2 12:19:42 aio EVENT-ID: 1630fc26-9694-e811-803c-956e16302b39
 Apr  2 12:19:42 aio DESC: The system has rebooted after a kernel panic.  
 Refer to http://illumos.org/msg/SUNOS-8000-KL for more information.
 Apr  2 12:19:42 aio AUTO-RESPONSE: The failed system image was dumped to the 
 dump device.  If savecore is enabled (see dumpadm(1M)) a copy of the dump 
 will be written to the savecore directory /var/crash/unknown.
 Apr  2 12:19:42 aio IMPACT: There may be some performance impact while the 
 panic is copied to the savecore directory.  Disk space usage by panics can 
 be substantial.
 Apr  2 12:19:42 aio REC-ACTION: If savecore is not enabled then please take 
 steps to preserve the crash image.
 Apr  2 12:19:42 aio Use 'fmdump -Vp -u 1630fc26-9694-e811-803c-956e16302b39' 
 to view more panic detail.  Please refer to the knowledge article for addi
 
 But what is defect??
 
 Apr  2 12:19:44 aio ^Mpanic[cpu1]/thread=ff04ebd5b840:
 Apr  2 12:19:44 aio genunix: [ID 683410 kern.notice] BAD TRAP: type=e (#pf 
 Page fault) rp=ff001f591630 addr=ff04f8e08b88
 Apr  2 12:19:44 aio unix: [ID 10 kern.notice] 
 Apr  2 12:19:44 aio unix: [ID 839527 kern.notice] nc: 
 Apr  2 12:19:44 aio unix: [ID 753105 kern.notice] #pf Page fault
 Apr  2 12:19:44 aio unix: [ID 532287 kern.notice] Bad kernel fault at 
 addr=0xff04f8e08b88
 Apr  2 12:19:44 aio unix: [ID 243837 kern.notice] pid=10842, 
 pc=0xfbb34880, sp=0xff001f591720, eflags=0x10282
 Apr  2 12:19:44 aio unix: [ID 211416 kern.notice] cr0: 
 8005003bpg,wp,ne,et,ts,mp,pe cr4: 406b8osxsav,xmme,fxsr,pge,pae,pse,de
 Apr  2 12:19:44 aio unix: [ID 624947 kern.notice] cr2: ff04f8e08b88
 Apr  2 12:19:44 aio unix: [ID 625075 kern.notice] cr3: 436a09000
 Apr  2 12:19:44 aio unix: [ID 625715 kern.notice] cr8: c
 Apr  2 12:19:44 aio unix: [ID 10 kern.notice] 
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   rdi: 
 ff001f5917b8 rsi: ff04f8e08b88 rdx:  80bd000
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   rcx:
 0  r8:0  r9:2
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   rax: 
  rbx: ff04edba0408 rbp: ff001f591730
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   r10: 
 fbcf3500 r11:0 r12: ff001f5917b8
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   r13: 
 ff04f8e08ba8 r14: ff04f8e08b88 r15:   20
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   fsb:
 0 gsb: ff04ea0e1580  ds:   4b
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]es:   
 4b  fs:0  gs:  1c3
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]   trp:
 e err:0 rip: fbb34880
 Apr  2 12:19:44 aio unix: [ID 592667 kern.notice]cs:   
 30 rfl:10282 rsp: ff001f591720
 Apr  2 12:19:44 aio unix: [ID 266532 kern.notice]ss:   38
 Apr  2 12:19:44 aio unix: [ID 10 kern.notice] 
 
 What I have done? Its running a replicate job (nappit) to backup
 a FS from aio_server to backup_server.
 
 Any hints?
 
 -- 
 Best Regards
 Alexander
 April, 02 
 2014kernelcrash.PNGmessages.txt___
 OmniOS-discuss mailing list
 OmniOS-discuss@lists.omniti.com
 http://lists.omniti.com/mailman/listinfo/omnios-discuss

 --
 http://bens.me.uk



-- 
Best Regards
Alexander
April, 02 2014

[1] mid:204f8923-878c-4520-869d-07951fafe...@fluffy.co.uk


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] Bad kernel fault at addr=0xffffff04f8e08b88

[Alexander Lesle]

Hello Ben, Dan and List,

I have forgotten to send the output from fmdump:

root@aio:~# fmdump -Vp -u 1630fc26-9694-e811-803c-956e16302b39
TIME   UUID SUNW-MSG-ID
Apr 02 2014 12:19:42.085291000 1630fc26-9694-e811-803c-956e16302b39 
SUNOS-8000-KL

  TIME CLASS ENA
  Apr 02 12:19:42.0809 ireport.os.sunos.panic.dump_available 0x
  Apr 02 12:20:24.9371 ireport.os.sunos.panic.dump_pending_on_device 
0x

nvlist version: 0
version = 0x0
class = list.suspect
uuid = 1630fc26-9694-e811-803c-956e16302b39
code = SUNOS-8000-KL
diag-time = 1396433982 81733
de = fmd:///module/software-diagnosis
fault-list-sz = 0x1
fault-list = (array of embedded nvlists)
(start fault-list[0])
nvlist version: 0
version = 0x0
class = defect.sunos.kernel.panic
certainty = 0x64
asru = 
sw:///:path=/var/crash/unknown/.1630fc26-9694-e811-803c-956e16302b39
resource = 
sw:///:path=/var/crash/unknown/.1630fc26-9694-e811-803c-956e16302b39
savecore-succcess = 1
dump-dir = /var/crash/unknown
dump-files = vmdump.1
os-instance-uuid = 1630fc26-9694-e811-803c-956e16302b39
panicstr = BAD TRAP: type=e (#pf Page fault) 
rp=ff001f591630 addr=ff04f8e08b88
panicstack = unix:real_mode_stop_cpu_stage2_end+9de3 () | 
unix:trap+db3 () | unix:cmntrap+e6 () | genunix:as_segcompar+10 () | 
genunix:avl_find+72 () | genunix:as_segat+3d () | genunix:as_fault+27a () | 
unix:pagefault+96 () | unix:trap+d23 () | unix:cmntrap+e6 () | 
unix:bcopy_altentry+55a () | genunix:uiomove+f8 () | fifofs:fifo_read+192 () | 
genunix:fop_read+5b () | genunix:read+2a7 () | genunix:read32+1e () | 
unix:brand_sys_sysenter+1c9 () |
crashtime = 1396433985
panic-time =  2. April 2014 12:19:45 CEST CEST
(end fault-list[0])

fault-status = 0x1
severity = Major
__ttl = 0x1
__tod = 0x533be43e 0x5156ff8

root@aio:~#

Hope it helps to help me. :-)

-- 
Best Regards
Alexander
April, 02 2014

[1] mid:hl2pasmm82socvki2ad8vcs0.1396440810...@email.android.com


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss

Re: [OmniOS-discuss] the right card for a server

[Alexander Lesle]

Morning Michael and List,

am Freitag, 10. Januar 2014 um 00:48 hat Michael Mounteney u.a.
in mid:30e9da749bc0b63d2beb1803d85abac7.squir...@landcroft.co.uk geschrieben:
 you need a Riser-Card (RSC-RR1U-E8) too.

About riser-card you got a answer from Matthew Frazer.

 Take a look at Supermicro add-on Cards:
 http://www.supermicro.nl/products/accessories/index.cfm

 There you can find a 4 Port Intel Nic
 http://www.supermicro.nl/products/accessories/addon/AOC-UG-i4.cfm

 I appreciate that you are trying to help, Alexandre, but there are two
 points that I find puzzling in your advice.

 Firstly that I've never seen any other reference to needing a riser for a
 PCI card.  SAS, yes;   PCI, no.


 Secondly, Supermicro's own compatibility matrix for the product, at
 http://www.supermicro.nl/support/resources/AOC/UIO_AOC_Compatibility.cfm
 excludes the NIC you mention from my hardware;  it is a full-height card
 and the 5017C-LF only accommodates low-profile.

Thats about the slot-plate nothing else.
UIO is it on the other side. Its not a problem to chance it to
standard and the SM add-on cards are quite cheap.

Look at the 4-port interphase nic
the specs tells also:
Form Factor: PCI express, standard height, half length
and standard height is full height

I have found this Intel nic in low profile, but maybe EOL
http://www.intel.com/content/www/us/en/network-adapters/gigabit-network-adapters/pro-1000-pt-qp.html

-- 
Mit freundlichem Gruss
Alexander
mailto:gro...@tierarzt-mueller.de
eMail geschrieben mit: The Bat! 5.8.8
unter Windows 7 Pro Service Pack 1


___
OmniOS-discuss mailing list
OmniOS-discuss@lists.omniti.com
http://lists.omniti.com/mailman/listinfo/omnios-discuss